diff mbox series

[9/9] drm/verisilicon: Add starfive hdmi driver

Message ID 20230602074043.33872-10-keith.zhao@starfivetech.com (mailing list archive)
State New, archived
Headers show
Series Add DRM driver for StarFive SoC JH7110 | expand

Commit Message

Keith Zhao June 2, 2023, 7:40 a.m. UTC
Add HDMI dirver for StarFive SoC JH7110.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
---
 drivers/gpu/drm/verisilicon/Kconfig         |  11 +
 drivers/gpu/drm/verisilicon/Makefile        |   1 +
 drivers/gpu/drm/verisilicon/starfive_hdmi.c | 928 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/starfive_hdmi.h | 296 +++++++
 drivers/gpu/drm/verisilicon/vs_drv.c        |   6 +
 drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
 6 files changed, 1246 insertions(+)
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h

Comments

Philipp Zabel June 5, 2023, 8:08 a.m. UTC | #1
Hi Keith,

On Fri, Jun 02, 2023 at 03:40:43PM +0800, Keith Zhao wrote:
> Add HDMI dirver for StarFive SoC JH7110.
> 
> Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
> ---
>  drivers/gpu/drm/verisilicon/Kconfig         |  11 +
>  drivers/gpu/drm/verisilicon/Makefile        |   1 +
>  drivers/gpu/drm/verisilicon/starfive_hdmi.c | 928 ++++++++++++++++++++
>  drivers/gpu/drm/verisilicon/starfive_hdmi.h | 296 +++++++
>  drivers/gpu/drm/verisilicon/vs_drv.c        |   6 +
>  drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
>  6 files changed, 1246 insertions(+)
>  create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
>  create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
> 
[...]
> diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.c b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
> new file mode 100644
> index 000000000000..128ecca03309
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
> @@ -0,0 +1,928 @@
[...]
> +static int starfive_hdmi_enable_clk_deassert_rst(struct device *dev, struct starfive_hdmi *hdmi)
> +{
> +	int ret;
> +
> +	ret = clk_prepare_enable(hdmi->sys_clk);
> +	if (ret) {
> +		DRM_DEV_ERROR(dev, "Cannot enable HDMI sys clock: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(hdmi->mclk);
> +	if (ret) {
> +		DRM_DEV_ERROR(dev, "Cannot enable HDMI mclk clock: %d\n", ret);
> +		return ret;
> +	}
> +	ret = clk_prepare_enable(hdmi->bclk);
> +	if (ret) {
> +		DRM_DEV_ERROR(dev, "Cannot enable HDMI bclk clock: %d\n", ret);
> +		return ret;
> +	}
> +	ret = reset_control_deassert(hdmi->tx_rst);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to deassert tx_rst\n");

The error paths should clk_disable_unprepare() enabled clocks.

> +		return ret;
> +	}
> +	return 0;
> +}
> +
[...]
> +static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
> +{
> +	hdmi->sys_clk = devm_clk_get(dev, "sysclk");
> +	if (IS_ERR(hdmi->sys_clk)) {
> +		DRM_DEV_ERROR(dev, "Unable to get HDMI sysclk clk\n");
> +		return PTR_ERR(hdmi->sys_clk);
> +	}
> +	hdmi->mclk = devm_clk_get(dev, "mclk");
> +	if (IS_ERR(hdmi->mclk)) {
> +		DRM_DEV_ERROR(dev, "Unable to get HDMI mclk clk\n");
> +		return PTR_ERR(hdmi->mclk);
> +	}
> +	hdmi->bclk = devm_clk_get(dev, "bclk");
> +	if (IS_ERR(hdmi->bclk)) {
> +		DRM_DEV_ERROR(dev, "Unable to get HDMI bclk clk\n");
> +		return PTR_ERR(hdmi->bclk);
> +	}
> +	hdmi->tx_rst = reset_control_get_shared(dev, "hdmi_tx");

Use devm_reset_control_get_shared() for consistency, otherwise this is missing
a reset_control_put() somewhere.

regards
Philipp
Maxime Ripard June 5, 2023, 9:56 a.m. UTC | #2
Hi,

On Fri, Jun 02, 2023 at 03:40:43PM +0800, Keith Zhao wrote:
> Add HDMI dirver for StarFive SoC JH7110.
> 
> Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>

I have a few high level comments:

> +static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
> +			       struct drm_display_mode *mode)
> +{
> +	hdmi_modb(hdmi, STARFIVE_BIAS_CONTROL, STARFIVE_BIAS_ENABLE, STARFIVE_BIAS_ENABLE);
> +	hdmi_writeb(hdmi, STARFIVE_RX_CONTROL, STARFIVE_RX_ENABLE);
> +	hdmi->hdmi_data.vic = drm_match_cea_mode(mode);
> +
> +	hdmi->tmds_rate = mode->clock * 1000;
> +	starfive_hdmi_phy_clk_set_rate(hdmi);
> +
> +	while (!(hdmi_readb(hdmi, STARFIVE_PRE_PLL_LOCK_STATUS) & 0x1))
> +		continue;
> +	while (!(hdmi_readb(hdmi, STARFIVE_POST_PLL_LOCK_STATUS) & 0x1))
> +		continue;
> +
> +	/*turn on LDO*/
> +	hdmi_writeb(hdmi, STARFIVE_LDO_CONTROL, STARFIVE_LDO_ENABLE);
> +	/*turn on serializer*/
> +	hdmi_writeb(hdmi, STARFIVE_SERIALIER_CONTROL, STARFIVE_SERIALIER_ENABLE);
> +
> +	starfive_hdmi_tx_phy_power_down(hdmi);
> +	starfive_hdmi_config_video_timing(hdmi, mode);
> +	starfive_hdmi_tx_phy_power_on(hdmi);
> +
> +	starfive_hdmi_tmds_driver_on(hdmi);
> +	starfive_hdmi_sync_tmds(hdmi);
> +
> +	return 0;
> +}

The PHY PLL supports rate until 594MHz, but I don't see any scrambler
setup here?

> +static void starfive_hdmi_encoder_mode_set(struct drm_encoder *encoder,
> +					   struct drm_display_mode *mode,
> +					   struct drm_display_mode *adj_mode)
> +{
> +	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
> +
> +	starfive_hdmi_setup(hdmi, adj_mode);

You should put that call into the enable callback, there's no need to
power it up at that point.

> +	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));

You don't seem to be using that anywhere, and it's not the previous but
the current mode.

> +}
> +
> +static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder)
> +{
> +	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
> +
> +	pm_runtime_get_sync(hdmi->dev);
> +}
> +
> +static void starfive_hdmi_encoder_disable(struct drm_encoder *encoder)
> +{
> +	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
> +
> +	pm_runtime_put(hdmi->dev);
> +}
> +
> +static bool starfive_hdmi_encoder_mode_fixup(struct drm_encoder *encoder,
> +					     const struct drm_display_mode *mode,
> +					     struct drm_display_mode *adj_mode)
> +{
> +	return true;
> +}

You can drop that one

> +static int
> +starfive_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
> +				   struct drm_crtc_state *crtc_state,
> +				   struct drm_connector_state *conn_state)
> +{
> +	return 0;
> +}

Ditto

> +static int starfive_hdmi_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
> +	struct edid *edid;
> +	int ret = 0;
> +
> +	if (!hdmi->ddc)
> +		return 0;
> +
> +	edid = drm_get_edid(connector, hdmi->ddc);
> +	if (edid) {
> +		hdmi->hdmi_data.sink_is_hdmi = drm_detect_hdmi_monitor(edid);
> +		hdmi->hdmi_data.sink_has_audio = drm_detect_monitor_audio(edid);
> +		drm_connector_update_edid_property(connector, edid);
> +		ret = drm_add_edid_modes(connector, edid);
> +		kfree(edid);
> +	}
> +
> +	return ret;
> +}

get_modes can be called while the connector is inactive, you need to
call pm_runtime_get_sync / pm_runtime_put here

> +static enum drm_mode_status
> +starfive_hdmi_connector_mode_valid(struct drm_connector *connector,
> +				   struct drm_display_mode *mode)
> +{
> +	const struct pre_pll_config *cfg = pre_pll_cfg_table;
> +	int pclk = mode->clock * 1000;
> +	bool valid = false;
> +	int i;
> +
> +	for (i = 0; cfg[i].pixclock != (~0UL); i++) {
> +		if (pclk == cfg[i].pixclock) {
> +			if (pclk > 297000000)
> +				continue;
> +
> +			valid = true;
> +			break;
> +		}
> +	}
> +
> +	return (valid) ? MODE_OK : MODE_BAD;
> +}

So I guess that's why you don't bother with the scrambler, you filter
all the modes > 297MHz?

If so, you also need to make sure it happens in atomic_check. mode_valid
will only filter the modes exposed to userspace, but the userspace is
free to send any mode it wants and that's checked by atomic_check.

> +
> +static int
> +starfive_hdmi_probe_single_connector_modes(struct drm_connector *connector,
> +					   u32 maxX, u32 maxY)
> +{
> +	struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
> +	int ret;
> +
> +	pm_runtime_get_sync(hdmi->dev);
> +
> +	ret = drm_helper_probe_single_connector_modes(connector, 3840, 2160);
> +
> +	pm_runtime_put(hdmi->dev);
> +
> +	return ret;
> +}

You already have a pm_runtime_get_sync call in get_modes, why is that
necessary?

> +
> +static void starfive_hdmi_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_unregister(connector);
> +	drm_connector_cleanup(connector);
> +}

Use drmm_connector_init.

> +static irqreturn_t starfive_hdmi_irq(int irq, void *dev_id)
> +{
> +	struct starfive_hdmi *hdmi = dev_id;
> +
> +	drm_helper_hpd_irq_event(hdmi->connector.dev);

drm_connector_helper_hpd_irq_event()

> +static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
> +{
> +	hdmi->sys_clk = devm_clk_get(dev, "sysclk");
> +	if (IS_ERR(hdmi->sys_clk)) {
> +		DRM_DEV_ERROR(dev, "Unable to get HDMI sysclk clk\n");
> +		return PTR_ERR(hdmi->sys_clk);
> +	}
> +	hdmi->mclk = devm_clk_get(dev, "mclk");
> +	if (IS_ERR(hdmi->mclk)) {
> +		DRM_DEV_ERROR(dev, "Unable to get HDMI mclk clk\n");
> +		return PTR_ERR(hdmi->mclk);
> +	}
> +	hdmi->bclk = devm_clk_get(dev, "bclk");
> +	if (IS_ERR(hdmi->bclk)) {
> +		DRM_DEV_ERROR(dev, "Unable to get HDMI bclk clk\n");
> +		return PTR_ERR(hdmi->bclk);
> +	}
> +	hdmi->tx_rst = reset_control_get_shared(dev, "hdmi_tx");
> +	if (IS_ERR(hdmi->tx_rst)) {
> +		DRM_DEV_ERROR(dev, "Unable to get HDMI tx rst\n");
> +		return PTR_ERR(hdmi->tx_rst);
> +	}

That one isn't device-managed, you'll need to put back the reference in
unbind.

> +	return 0;
> +}
> +
> +static int starfive_hdmi_bind(struct device *dev, struct device *master,
> +			      void *data)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct drm_device *drm = data;
> +	struct starfive_hdmi *hdmi;
> +	struct resource *iores;
> +	int irq;
> +	int ret;
> +
> +	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
> +	if (!hdmi)
> +		return -ENOMEM;

Using device-managed actions to allocate memory that will eventually
hold the connectors and encoders is unsafe.

Please use drmm_kzalloc here, and test that it all works fine by
enabling KASAN and removing the module.

> +
> +	hdmi->dev = dev;
> +	hdmi->drm_dev = drm;
> +
> +	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	hdmi->regs = devm_ioremap_resource(dev, iores);
> +	if (IS_ERR(hdmi->regs))
> +		return PTR_ERR(hdmi->regs);

The main issue I was mentioning above is that whenever the device is
unbound from its driver, all the device-managed actions are executed.

However, the KMS device will still be there until the last (userspace)
user closes its FD, so if anything happens between the time the module
is removed and the FD is closed, you get plenty of use-after-free errors.

For MMIO accesses, this is even more true since you need to use a
device-managed action for the registers mapping (this is true for any
resource tied to the device itself, so clocks, reset, etc. fit that
description too).

To protect against it, you need to protect any device access by a call
to drm_dev_enter/drm_dev_exit.

> +
> +	ret = starfive_hdmi_get_clk_rst(dev, hdmi);
> +	ret = starfive_hdmi_enable_clk_deassert_rst(dev, hdmi);

Why does the device need to be powered here?

> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		ret = irq;
> +		goto err_disable_clk;
> +	}
> +
> +	hdmi->ddc = starfive_hdmi_i2c_adapter(hdmi);
> +	if (IS_ERR(hdmi->ddc)) {
> +		ret = PTR_ERR(hdmi->ddc);
> +		hdmi->ddc = NULL;
> +		goto err_disable_clk;
> +	}
> +
> +	hdmi->tmds_rate = clk_get_rate(hdmi->sys_clk);

It's not clear to me what tmds_rate is here, wouldn't that change from
one mode to the next?

> +	starfive_hdmi_i2c_init(hdmi);
> +
> +	ret = starfive_hdmi_register(drm, hdmi);
> +	if (ret)
> +		goto err_put_adapter;
> +
> +	dev_set_drvdata(dev, hdmi);
> +
> +	/* Unmute hotplug interrupt */
> +	hdmi_modb(hdmi, HDMI_STATUS, m_MASK_INT_HOTPLUG, v_MASK_INT_HOTPLUG(1));
> +
> +	ret = devm_request_threaded_irq(dev, irq, starfive_hdmi_hardirq,
> +					starfive_hdmi_irq, IRQF_SHARED,
> +					dev_name(dev), hdmi);
> +	if (ret < 0)
> +		goto err_cleanup_hdmi;
> +
> +	pm_runtime_use_autosuspend(&pdev->dev);
> +	pm_runtime_set_autosuspend_delay(&pdev->dev, 500);

Autosuspend? Shouldn't we enable the device as long as there is an
active video output (and you have that covered already)?

> +	pm_runtime_enable(&pdev->dev);
> +
> +	starfive_hdmi_disable_clk_assert_rst(dev, hdmi);

It would be clearer if you would move
starfive_hdmi_enable_clk_deassert_rst()/disable_clk_assert_rst() into
runtime_resume/runtime_suspend, and then in you bind just call
pm_runtime_enable(), pm_runtime_get_sync(), do the registration, and
pm_runtime_put.

> +#define UPDATE(x, h, l)\
> +({\
> +	typeof(x) x_ = (x);\
> +	typeof(h) h_ = (h);\
> +	typeof(l) l_ = (l);\
> +	(((x_) << (l_)) & GENMASK((h_), (l_)));\
> +})

That's FIELD_PREP, right?
Maxime
Hoegeun Kwon June 23, 2023, 2:38 a.m. UTC | #3
Hi Keith,

There is a problem with stopping when changing modes.

Below test log

root:~> modetest -Mstarfive -c
Connectors:
id      encoder status          name            size (mm)       modes
encoders
116     115     connected       HDMI-A-1        320x180         51      115
  modes:
        index name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot
  #0 1280x800 59.91 1280 1328 1360 1440 800 803 809 823 71000 flags: phsync,
pvsync; type: preferred, driver
  #1 1920x1080 60.00 1920 2008 2052 2200 1080 1084 1089 1125 148500 flags:
phsync, pvsync; type: driver
[...]

root:~> modetest -Mstarfive -s 116:#0 -v
setting mode 1280x800-59.91Hz on connectors 116, crtc 31
freq: 60.65Hz
freq: 59.91Hz
freq: 59.91Hz

root:~> modetest -Mstarfive -s 116:#1 -v
setting mode 1920x1080-60.00Hz on connectors 116, crtc 31
[   94.535626] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[   94.560985] rcu:     1-...0: (20 ticks this GP)
idle=c9bc/1/0x4000000000000000 softirq=3869/3871 fqs=1120
[   94.589532] rcu:     (detected by 3, t=5264 jiffies, g=4645, q=63
ncpus=4)
[   94.615335] Task dump for CPU 1:
[   94.637723] task:modetest        state:R  running task     stack:0
pid:407   ppid:397    flags:0x00000008
[   94.667299] Call Trace:
[   94.689297] [<ffffffff80d1e8fc>] __schedule+0x2a8/0xa52
[   94.714221] [<ffffffff80d1f100>] schedule+0x5a/0xdc
[   94.738626] [<ffffffff80d25a14>] schedule_timeout+0x220/0x2a6
[   94.763762] [<ffffffff80d2037a>] wait_for_completion+0xfe/0x126
[   94.789073] [<ffffffff8002ffe4>] kthread_flush_worker+0x82/0xa0


> -----Original Message-----
> From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On Behalf Of
> Keith Zhao
> Sent: Friday, June 2, 2023 4:41 PM
> To: dri-devel@lists.freedesktop.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-riscv@lists.infradead.org; linux-
> media@vger.kernel.org; linaro-mm-sig@lists.linaro.org
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Sumit Semwal
> <sumit.semwal@linaro.org>; Emil Renner Berthing <kernel@esmil.dk>;
> Shengyang Chen <shengyang.chen@starfivetech.com>; Conor Dooley
> <conor+dt@kernel.org>; Albert Ou <aou@eecs.berkeley.edu>; Thomas
> Zimmermann <tzimmermann@suse.de>; Jagan Teki <jagan@edgeble.ai>; Rob
> Herring <robh+dt@kernel.org>; Chris Morgan <macromorgan@hotmail.com>; Paul
> Walmsley <paul.walmsley@sifive.com>; Keith Zhao
> <keith.zhao@starfivetech.com>; Bjorn Andersson <andersson@kernel.org>;
> Changhuang Liang <changhuang.liang@starfivetech.com>; Jack Zhu
> <jack.zhu@starfivetech.com>; Palmer Dabbelt <palmer@dabbelt.com>; Shawn
> Guo <shawnguo@kernel.org>; christian.koenig@amd.com
> Subject: [PATCH 9/9] drm/verisilicon: Add starfive hdmi driver
> 
> Add HDMI dirver for StarFive SoC JH7110.
> 
> Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
> ---
>  drivers/gpu/drm/verisilicon/Kconfig         |  11 +
>  drivers/gpu/drm/verisilicon/Makefile        |   1 +
>  drivers/gpu/drm/verisilicon/starfive_hdmi.c | 928 ++++++++++++++++++++
> drivers/gpu/drm/verisilicon/starfive_hdmi.h | 296 +++++++
>  drivers/gpu/drm/verisilicon/vs_drv.c        |   6 +
>  drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
>  6 files changed, 1246 insertions(+)
>  create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
>  create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h

[...]

> diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.c
> b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
> new file mode 100644
> index 000000000000..128ecca03309
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
> @@ -0,0 +1,928 @@

[...]

> +static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
> +			       struct drm_display_mode *mode) {

[...]

> +	return 0;
> +}
> +
> +static void starfive_hdmi_encoder_mode_set(struct drm_encoder *encoder,
> +					   struct drm_display_mode *mode,
> +					   struct drm_display_mode
*adj_mode) {
> +	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
> +
> +	starfive_hdmi_setup(hdmi, adj_mode);

When starfive_hdmi_setup runs here,
when changing the mode, a problem occurs because try to write a value to reg
in a state that is not resumed after suspend.

> +
> +	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi-
> >previous_mode)); }
> +
> +static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder) {
> +	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
> +
> +	pm_runtime_get_sync(hdmi->dev);

So if move the call point of starfive_hdmi_setup here, it works normally.

> +}

Best regards,
Hoegeun
Keith Zhao June 26, 2023, 5:34 a.m. UTC | #4
yes I tested 
modetest -M starfive -D 0 -s 116@31:1280x720-59.94 -v
modetest -M starfive -D 0 -s 116@31:1920x1080 -v

and the second command will repeat the problem
as you advise at the beginning
I call the "starfive_hdmi_setup"  function in the "starfive_hdmi_encoder_enable"
instead of "starfive_hdmi_encoder_mode_set"
resolve the problem
i will add this modify in my next patch

Thank you Hoegeun

On 2023/6/23 10:38, Hoegeun Kwon wrote:
> Hi Keith,
> 
> There is a problem with stopping when changing modes.
> 
> Below test log
> 
> root:~> modetest -Mstarfive -c
> Connectors:
> id      encoder status          name            size (mm)       modes
> encoders
> 116     115     connected       HDMI-A-1        320x180         51      115
>   modes:
>         index name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot
>   #0 1280x800 59.91 1280 1328 1360 1440 800 803 809 823 71000 flags: phsync,
> pvsync; type: preferred, driver
>   #1 1920x1080 60.00 1920 2008 2052 2200 1080 1084 1089 1125 148500 flags:
> phsync, pvsync; type: driver
> [...]
> 
> root:~> modetest -Mstarfive -s 116:#0 -v
> setting mode 1280x800-59.91Hz on connectors 116, crtc 31
> freq: 60.65Hz
> freq: 59.91Hz
> freq: 59.91Hz
> 
> root:~> modetest -Mstarfive -s 116:#1 -v
> setting mode 1920x1080-60.00Hz on connectors 116, crtc 31
> [   94.535626] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [   94.560985] rcu:     1-...0: (20 ticks this GP)
> idle=c9bc/1/0x4000000000000000 softirq=3869/3871 fqs=1120
> [   94.589532] rcu:     (detected by 3, t=5264 jiffies, g=4645, q=63
> ncpus=4)
> [   94.615335] Task dump for CPU 1:
> [   94.637723] task:modetest        state:R  running task     stack:0
> pid:407   ppid:397    flags:0x00000008
> [   94.667299] Call Trace:
> [   94.689297] [<ffffffff80d1e8fc>] __schedule+0x2a8/0xa52
> [   94.714221] [<ffffffff80d1f100>] schedule+0x5a/0xdc
> [   94.738626] [<ffffffff80d25a14>] schedule_timeout+0x220/0x2a6
> [   94.763762] [<ffffffff80d2037a>] wait_for_completion+0xfe/0x126
> [   94.789073] [<ffffffff8002ffe4>] kthread_flush_worker+0x82/0xa0
> 
> 
>> -----Original Message-----
>> From: dri-devel <dri-devel-bounces@lists.freedesktop.org> On Behalf Of
>> Keith Zhao
>> Sent: Friday, June 2, 2023 4:41 PM
>> To: dri-devel@lists.freedesktop.org; devicetree@vger.kernel.org; linux-
>> kernel@vger.kernel.org; linux-riscv@lists.infradead.org; linux-
>> media@vger.kernel.org; linaro-mm-sig@lists.linaro.org
>> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Sumit Semwal
>> <sumit.semwal@linaro.org>; Emil Renner Berthing <kernel@esmil.dk>;
>> Shengyang Chen <shengyang.chen@starfivetech.com>; Conor Dooley
>> <conor+dt@kernel.org>; Albert Ou <aou@eecs.berkeley.edu>; Thomas
>> Zimmermann <tzimmermann@suse.de>; Jagan Teki <jagan@edgeble.ai>; Rob
>> Herring <robh+dt@kernel.org>; Chris Morgan <macromorgan@hotmail.com>; Paul
>> Walmsley <paul.walmsley@sifive.com>; Keith Zhao
>> <keith.zhao@starfivetech.com>; Bjorn Andersson <andersson@kernel.org>;
>> Changhuang Liang <changhuang.liang@starfivetech.com>; Jack Zhu
>> <jack.zhu@starfivetech.com>; Palmer Dabbelt <palmer@dabbelt.com>; Shawn
>> Guo <shawnguo@kernel.org>; christian.koenig@amd.com
>> Subject: [PATCH 9/9] drm/verisilicon: Add starfive hdmi driver
>> 
>> Add HDMI dirver for StarFive SoC JH7110.
>> 
>> Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
>> ---
>>  drivers/gpu/drm/verisilicon/Kconfig         |  11 +
>>  drivers/gpu/drm/verisilicon/Makefile        |   1 +
>>  drivers/gpu/drm/verisilicon/starfive_hdmi.c | 928 ++++++++++++++++++++
>> drivers/gpu/drm/verisilicon/starfive_hdmi.h | 296 +++++++
>>  drivers/gpu/drm/verisilicon/vs_drv.c        |   6 +
>>  drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
>>  6 files changed, 1246 insertions(+)
>>  create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
>>  create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
> 
> [...]
> 
>> diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> new file mode 100644
>> index 000000000000..128ecca03309
>> --- /dev/null
>> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> @@ -0,0 +1,928 @@
> 
> [...]
> 
>> +static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
>> +			       struct drm_display_mode *mode) {
> 
> [...]
> 
>> +	return 0;
>> +}
>> +
>> +static void starfive_hdmi_encoder_mode_set(struct drm_encoder *encoder,
>> +					   struct drm_display_mode *mode,
>> +					   struct drm_display_mode
> *adj_mode) {
>> +	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> +
>> +	starfive_hdmi_setup(hdmi, adj_mode);
> 
> When starfive_hdmi_setup runs here,
> when changing the mode, a problem occurs because try to write a value to reg
> in a state that is not resumed after suspend.
> 
>> +
>> +	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi-
>> >previous_mode)); }
>> +
>> +static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder) {
>> +	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> +
>> +	pm_runtime_get_sync(hdmi->dev);
> 
> So if move the call point of starfive_hdmi_setup here, it works normally.
> 
>> +}
> 
> Best regards,
> Hoegeun
> 
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/verisilicon/Kconfig b/drivers/gpu/drm/verisilicon/Kconfig
index 89d12185f73b..35e85ac41b10 100644
--- a/drivers/gpu/drm/verisilicon/Kconfig
+++ b/drivers/gpu/drm/verisilicon/Kconfig
@@ -11,3 +11,14 @@  config DRM_VERISILICON
 	  This driver provides VeriSilicon kernel mode
 	  setting and buffer management. It does not
 	  provide 2D or 3D acceleration.
+
+config STARFIVE_HDMI
+	bool "Starfive specific extensions HDMI"
+	help
+	   This selects support for StarFive SoC specific extensions
+	   for the Innosilicon HDMI driver. If you want to enable
+	   HDMI on JH7110 based SoC, you should select this option.
+
+	   To compile this driver as a module, choose M here.
+
+
diff --git a/drivers/gpu/drm/verisilicon/Makefile b/drivers/gpu/drm/verisilicon/Makefile
index 0ed25b5e3062..ebe2c94f529a 100644
--- a/drivers/gpu/drm/verisilicon/Makefile
+++ b/drivers/gpu/drm/verisilicon/Makefile
@@ -8,5 +8,6 @@  vs_drm-objs := vs_dc_hw.o \
 		vs_gem.o \
 		vs_plane.o
 
+vs_drm-$(CONFIG_STARFIVE_HDMI) += starfive_hdmi.o
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
 
diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.c b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
new file mode 100644
index 000000000000..128ecca03309
--- /dev/null
+++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
@@ -0,0 +1,928 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include "starfive_hdmi.h"
+#include "vs_drv.h"
+
+static struct starfive_hdmi *encoder_to_hdmi(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct starfive_hdmi, encoder);
+}
+
+static struct starfive_hdmi *connector_to_hdmi(struct drm_connector *connector)
+{
+	return container_of(connector, struct starfive_hdmi, connector);
+}
+
+struct starfive_hdmi_i2c {
+	struct i2c_adapter adap;
+
+	u8 ddc_addr;
+	u8 segment_addr;
+	/* protects the edid data when use i2c cmd to read edid */
+	struct mutex lock;
+	struct completion cmp;
+};
+
+static const struct pre_pll_config pre_pll_cfg_table[] = {
+	{ 25175000,  25175000, 1,  100, 2, 3, 3, 12, 3, 3, 4, 0, 0xf55555},
+	{ 25200000,  25200000, 1,  100, 2, 3, 3, 12, 3, 3, 4, 0, 0},
+	{ 27000000,  27000000, 1,  90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
+	{ 27027000,  27027000, 1,  90, 3, 2, 2, 10, 3, 3, 4, 0, 0x170a3d},
+	{ 28320000,  28320000, 1,  28, 2, 1, 1,  3, 0, 3, 4, 0, 0x51eb85},
+	{ 30240000,  30240000, 1,  30, 2, 1, 1,  3, 0, 3, 4, 0, 0x3d70a3},
+	{ 31500000,  31500000, 1,  31, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
+	{ 33750000,  33750000, 1,  33, 2, 1, 1,  3, 0, 3, 4, 0, 0xcfffff},
+	{ 36000000,  36000000, 1,  36, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{ 40000000,  40000000, 1,  80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
+	{ 46970000,  46970000, 1,  46, 2, 1, 1,  3, 0, 3, 4, 0, 0xf851eb},
+	{ 49500000,  49500000, 1,  49, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
+	{ 49000000,  49000000, 1,  49, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{ 50000000,  50000000, 1,  50, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{ 54000000,  54000000, 1,  54, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{ 54054000,  54054000, 1,  54, 2, 1, 1,  3, 0, 3, 4, 0, 0x0dd2f1},
+	{ 57284000,  57284000, 1,  57, 2, 1, 1,  3, 0, 3, 4, 0, 0x48b439},
+	{ 58230000,  58230000, 1,  58, 2, 1, 1,  3, 0, 3, 4, 0, 0x3ae147},
+	{ 59341000,  59341000, 1,  59, 2, 1, 1,  3, 0, 3, 4, 0, 0x574bc6},
+	{ 59400000,  59400000, 1,  99, 3, 1, 1,  1, 3, 3, 4, 0, 0},
+	{ 65000000,  65000000, 1, 130, 2, 2, 2,  12, 0, 2, 2, 0, 0},
+	{ 68250000,  68250000, 1, 68,  2, 1, 1,  3,  0, 3, 4, 0, 0x3fffff},
+	{ 71000000,  71000000, 1,  71, 2, 1, 1,  3, 0, 3,  4, 0, 0},
+	{ 74176000,  74176000, 1,  98, 1, 2, 2,  1, 2, 3, 4, 0, 0xe6ae6b},
+	{ 74250000,  74250000, 1,  99, 1, 2, 2,  1, 2, 3, 4, 0, 0},
+	{ 75000000,  75000000, 1,  75, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{ 78750000,  78750000, 1,  78, 2, 1, 1,  3, 0, 3, 4, 0, 0xcfffff},
+	{ 79500000,  79500000, 1,  79, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
+	{ 83500000,  83500000, 2, 167, 2, 1, 1,  1, 0, 0,  6, 0, 0},
+	{ 83500000, 104375000, 1, 104, 2, 1, 1,  1, 1, 0,  5, 0, 0x600000},
+	{ 84858000,  84858000, 1,  85, 2, 1, 1,  3, 0, 3,  4, 0, 0xdba5e2},
+	{ 85500000,  85500000, 1,  85, 2, 1, 1,  3, 0, 3,  4, 0, 0x7fffff},
+	{ 85750000,  85750000, 1,  85, 2, 1, 1,  3, 0, 3,  4, 0, 0xcfffff},
+	{ 85800000,  85800000, 1,  85, 2, 1, 1,  3, 0, 3,  4, 0, 0xcccccc},
+	{ 88750000,  88750000, 1,  88, 2, 1, 1,  3, 0, 3,  4, 0, 0xcfffff},
+	{ 89910000,  89910000, 1,  89, 2, 1, 1,  3, 0, 3, 4, 0, 0xe8f5c1},
+	{ 90000000,  90000000, 1,  90, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{101000000, 101000000, 1, 101, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{102250000, 102250000, 1, 102, 2, 1, 1,  3, 0, 3, 4, 0, 0x3fffff},
+	{106500000, 106500000, 1, 106, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
+	{108000000, 108000000, 1,  90, 3, 0, 0,  5, 0, 2,  2, 0, 0},
+	{119000000, 119000000, 1, 119, 2, 1, 1,  3, 0, 3,  4, 0, 0},
+	{131481000, 131481000, 1,  131, 2, 1, 1,  3, 0, 3,  4, 0, 0x7b22d1},
+	{135000000, 135000000, 1,  135, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{136750000, 136750000, 1,  136, 2, 1, 1,  3, 0, 3, 4, 0, 0xcfffff},
+	{147180000, 147180000, 1,  147, 2, 1, 1,  3, 0, 3, 4, 0, 0x2e147a},
+	{148352000, 148352000, 1,  98, 1, 1, 1,  1, 2, 2, 2, 0, 0xe6ae6b},
+	{148500000, 148500000, 1,  99, 1, 1, 1,  1, 2, 2, 2, 0, 0},
+	{154000000, 154000000, 1, 154, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{156000000, 156000000, 1, 156, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{157000000, 157000000, 1, 157, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{162000000, 162000000, 1, 162, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{174250000, 174250000, 1, 145, 3, 0, 0,  5, 0, 2, 2, 0, 0x355555},
+	{174500000, 174500000, 1, 174, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
+	{174570000, 174570000, 1, 174, 2, 1, 1,  3, 0, 3, 4, 0, 0x91eb84},
+	{175500000, 175500000, 1, 175, 2, 1, 1,  3, 0, 3, 4, 0, 0x7fffff},
+	{185590000, 185590000, 1, 185, 2, 1, 1,  3, 0, 3, 4, 0, 0x970a3c},
+	{187000000, 187000000, 1, 187, 2, 1, 1,  3, 0, 3, 4, 0, 0},
+	{241500000, 241500000, 1, 161, 1, 1, 1,  4, 0, 2,  2, 0, 0},
+	{241700000, 241700000, 1, 241, 2, 1, 1,  3, 0, 3,  4, 0, 0xb33332},
+	{262750000, 262750000, 1, 262, 2, 1, 1,  3, 0, 3,  4, 0, 0xcfffff},
+	{296500000, 296500000, 1, 296, 2, 1, 1,  3, 0, 3,  4, 0, 0x7fffff},
+	{296703000, 296703000, 1,  98, 0, 1, 1,  1, 0, 2,  2, 0, 0xe6ae6b},
+	{297000000, 297000000, 1,  99, 0, 1, 1,  1, 0, 2,  2, 0, 0},
+	{594000000, 594000000, 1,  99, 0, 2, 0,  1, 0, 1,  1, 0, 0},
+	{0, 0, 0,  0, 0, 0, 0,  0, 0, 0,  0, 0, 0},
+};
+
+static const struct post_pll_config post_pll_cfg_table[] = {
+	{25200000,	1, 80, 13, 3, 1},
+	{27000000,	1, 40, 11, 3, 1},
+	{33750000,	1, 40, 11, 3, 1},
+	{49000000,	1, 20, 1, 3, 3},
+	{241700000, 1, 20, 1, 3, 3},
+	{297000000, 4, 20, 0, 0, 3},
+	{594000000, 4, 20, 0, 0, 0},
+	{ /* sentinel */ }
+};
+
+inline u8 hdmi_readb(struct starfive_hdmi *hdmi, u16 offset)
+{
+	return readl_relaxed(hdmi->regs + (offset) * 0x04);
+}
+
+inline void hdmi_writeb(struct starfive_hdmi *hdmi, u16 offset, u32 val)
+{
+	writel_relaxed(val, hdmi->regs + (offset) * 0x04);
+}
+
+inline void hdmi_modb(struct starfive_hdmi *hdmi, u16 offset,
+			     u32 msk, u32 val)
+{
+	u8 temp = hdmi_readb(hdmi, offset) & ~msk;
+
+	temp |= val & msk;
+	hdmi_writeb(hdmi, offset, temp);
+}
+
+static int starfive_hdmi_enable_clk_deassert_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+	int ret;
+
+	ret = clk_prepare_enable(hdmi->sys_clk);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "Cannot enable HDMI sys clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(hdmi->mclk);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "Cannot enable HDMI mclk clock: %d\n", ret);
+		return ret;
+	}
+	ret = clk_prepare_enable(hdmi->bclk);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "Cannot enable HDMI bclk clock: %d\n", ret);
+		return ret;
+	}
+	ret = reset_control_deassert(hdmi->tx_rst);
+	if (ret < 0) {
+		dev_err(dev, "failed to deassert tx_rst\n");
+		return ret;
+	}
+	return 0;
+}
+
+static void starfive_hdmi_disable_clk_assert_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+	int ret;
+
+	ret = reset_control_assert(hdmi->tx_rst);
+	if (ret < 0)
+		dev_err(dev, "failed to assert tx_rst\n");
+
+	clk_disable_unprepare(hdmi->sys_clk);
+	clk_disable_unprepare(hdmi->mclk);
+	clk_disable_unprepare(hdmi->bclk);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hdmi_system_pm_suspend(struct device *dev)
+{
+	return pm_runtime_force_suspend(dev);
+}
+
+static int hdmi_system_pm_resume(struct device *dev)
+{
+	return pm_runtime_force_resume(dev);
+}
+#endif
+
+#ifdef CONFIG_PM
+static int hdmi_runtime_suspend(struct device *dev)
+{
+	struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
+
+	starfive_hdmi_disable_clk_assert_rst(dev, hdmi);
+
+	return 0;
+}
+
+static int hdmi_runtime_resume(struct device *dev)
+{
+	struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
+
+	return starfive_hdmi_enable_clk_deassert_rst(dev, hdmi);
+}
+#endif
+
+static void starfive_hdmi_tx_phy_power_down(struct starfive_hdmi *hdmi)
+{
+	hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_OFF);
+}
+
+static void starfive_hdmi_tx_phy_power_on(struct starfive_hdmi *hdmi)
+{
+	hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_ON);
+}
+
+static void starfive_hdmi_config_pll(struct starfive_hdmi *hdmi)
+{
+	u32 val;
+	u8 reg_1ad_value = hdmi->post_cfg->post_div_en ?
+		 hdmi->post_cfg->postdiv : 0x00;
+	u8 reg_1aa_value = hdmi->post_cfg->post_div_en ?
+		 0x0e : 0x02;
+
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN);
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1,
+		    STARFIVE_POST_PLL_POST_DIV_ENABLE |
+		    STARFIVE_POST_PLL_REFCLK_SEL_TMDS |
+		    STARFIVE_POST_PLL_POWER_DOWN);
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_1, STARFIVE_PRE_PLL_PRE_DIV(hdmi->pre_cfg->prediv));
+
+	val = STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE | STARFIVE_SPREAD_SPECTRUM_MOD_DOWN;
+	if (!hdmi->pre_cfg->fracdiv)
+		val |= STARFIVE_PRE_PLL_FRAC_DIV_DISABLE;
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_2,
+		    STARFIVE_PRE_PLL_FB_DIV_11_8(hdmi->pre_cfg->fbdiv) | val);
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_3,
+		    STARFIVE_PRE_PLL_FB_DIV_7_0(hdmi->pre_cfg->fbdiv));
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_4,
+		    STARFIVE_PRE_PLL_TMDSCLK_DIV_C(hdmi->pre_cfg->tmds_div_c) |
+		    STARFIVE_PRE_PLL_TMDSCLK_DIV_A(hdmi->pre_cfg->tmds_div_a) |
+		    STARFIVE_PRE_PLL_TMDSCLK_DIV_B(hdmi->pre_cfg->tmds_div_b));
+
+	if (hdmi->pre_cfg->fracdiv) {
+		hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_L,
+			    STARFIVE_PRE_PLL_FRAC_DIV_7_0(hdmi->pre_cfg->fracdiv));
+		hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_M,
+			    STARFIVE_PRE_PLL_FRAC_DIV_15_8(hdmi->pre_cfg->fracdiv));
+		hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_H,
+			    STARFIVE_PRE_PLL_FRAC_DIV_23_16(hdmi->pre_cfg->fracdiv));
+	}
+
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_5,
+		    STARFIVE_PRE_PLL_PCLK_DIV_A(hdmi->pre_cfg->pclk_div_a) |
+		    STARFIVE_PRE_PLL_PCLK_DIV_B(hdmi->pre_cfg->pclk_div_b));
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_6,
+		    STARFIVE_PRE_PLL_PCLK_DIV_C(hdmi->pre_cfg->pclk_div_c) |
+		    STARFIVE_PRE_PLL_PCLK_DIV_D(hdmi->pre_cfg->pclk_div_d));
+
+	/*pre-pll power down*/
+	hdmi_modb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN, 0);
+
+	hdmi_modb(hdmi, STARFIVE_POST_PLL_DIV_2, STARFIVE_POST_PLL_Pre_DIV_MASK,
+		  STARFIVE_POST_PLL_PRE_DIV(hdmi->post_cfg->prediv));
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_3, hdmi->post_cfg->fbdiv & 0xff);
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_4, reg_1ad_value);
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1, reg_1aa_value);
+}
+
+static void starfive_hdmi_tmds_driver_on(struct starfive_hdmi *hdmi)
+{
+	hdmi_modb(hdmi, STARFIVE_TMDS_CONTROL,
+		  STARFIVE_TMDS_DRIVER_ENABLE, STARFIVE_TMDS_DRIVER_ENABLE);
+}
+
+static void starfive_hdmi_sync_tmds(struct starfive_hdmi *hdmi)
+{
+	/*first send 0 to this bit, then send 1 and keep 1 into this bit*/
+	hdmi_writeb(hdmi, HDMI_SYNC, 0x0);
+	hdmi_writeb(hdmi, HDMI_SYNC, 0x1);
+}
+
+static void starfive_hdmi_i2c_init(struct starfive_hdmi *hdmi)
+{
+	int ddc_bus_freq;
+
+	ddc_bus_freq = (hdmi->tmds_rate >> 2) / HDMI_SCL_RATE;
+
+	hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
+	hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
+
+	/* Clear the EDID interrupt flag and mute the interrupt */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+}
+
+static const
+struct pre_pll_config *starfive_hdmi_phy_get_pre_pll_cfg(struct starfive_hdmi *hdmi,
+							 unsigned long rate)
+{
+	const struct pre_pll_config *cfg = pre_pll_cfg_table;
+
+	rate = (rate / 1000) * 1000;
+	for (; cfg->pixclock != 0; cfg++)
+		if (cfg->tmdsclock == rate && cfg->pixclock == rate)
+			break;
+
+	if (cfg->pixclock == 0)
+		return ERR_PTR(-EINVAL);
+
+	return cfg;
+}
+
+static int starfive_hdmi_phy_clk_set_rate(struct starfive_hdmi *hdmi)
+{
+	hdmi->post_cfg = post_pll_cfg_table;
+
+	hdmi->pre_cfg = starfive_hdmi_phy_get_pre_pll_cfg(hdmi, hdmi->tmds_rate);
+	if (IS_ERR(hdmi->pre_cfg))
+		return PTR_ERR(hdmi->pre_cfg);
+
+	for (; hdmi->post_cfg->tmdsclock != 0; hdmi->post_cfg++)
+		if (hdmi->tmds_rate <= hdmi->post_cfg->tmdsclock)
+			break;
+
+	starfive_hdmi_config_pll(hdmi);
+
+	return 0;
+}
+
+static int starfive_hdmi_config_video_timing(struct starfive_hdmi *hdmi,
+					     struct drm_display_mode *mode)
+{
+	int value;
+	/* Set detail external video timing */
+	value = mode->htotal;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HTOTAL_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HTOTAL_H, (value >> 8) & 0xFF);
+
+	value = mode->htotal - mode->hdisplay;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_H, (value >> 8) & 0xFF);
+
+	value = mode->htotal - mode->hsync_start;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_H, (value >> 8) & 0xFF);
+
+	value = mode->hsync_end - mode->hsync_start;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDURATION_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDURATION_H, (value >> 8) & 0xFF);
+
+	value = mode->vtotal;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VTOTAL_L, value & 0xFF);
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VTOTAL_H, (value >> 8) & 0xFF);
+
+	value = mode->vtotal - mode->vdisplay;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
+
+	value = mode->vtotal - mode->vsync_start;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
+
+	value = mode->vsync_end - mode->vsync_start;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDURATION, value & 0xFF);
+
+	/* Set detail external video timing polarity and interlace mode */
+	value = v_EXTERANL_VIDEO(1);
+	value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
+		v_HSYNC_POLARITY(1) : v_HSYNC_POLARITY(0);
+	value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
+		v_VSYNC_POLARITY(1) : v_VSYNC_POLARITY(0);
+	value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
+		v_INETLACE(1) : v_INETLACE(0);
+
+	hdmi_writeb(hdmi, HDMI_VIDEO_TIMING_CTL, value);
+	return 0;
+}
+
+static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
+			       struct drm_display_mode *mode)
+{
+	hdmi_modb(hdmi, STARFIVE_BIAS_CONTROL, STARFIVE_BIAS_ENABLE, STARFIVE_BIAS_ENABLE);
+	hdmi_writeb(hdmi, STARFIVE_RX_CONTROL, STARFIVE_RX_ENABLE);
+	hdmi->hdmi_data.vic = drm_match_cea_mode(mode);
+
+	hdmi->tmds_rate = mode->clock * 1000;
+	starfive_hdmi_phy_clk_set_rate(hdmi);
+
+	while (!(hdmi_readb(hdmi, STARFIVE_PRE_PLL_LOCK_STATUS) & 0x1))
+		continue;
+	while (!(hdmi_readb(hdmi, STARFIVE_POST_PLL_LOCK_STATUS) & 0x1))
+		continue;
+
+	/*turn on LDO*/
+	hdmi_writeb(hdmi, STARFIVE_LDO_CONTROL, STARFIVE_LDO_ENABLE);
+	/*turn on serializer*/
+	hdmi_writeb(hdmi, STARFIVE_SERIALIER_CONTROL, STARFIVE_SERIALIER_ENABLE);
+
+	starfive_hdmi_tx_phy_power_down(hdmi);
+	starfive_hdmi_config_video_timing(hdmi, mode);
+	starfive_hdmi_tx_phy_power_on(hdmi);
+
+	starfive_hdmi_tmds_driver_on(hdmi);
+	starfive_hdmi_sync_tmds(hdmi);
+
+	return 0;
+}
+
+static void starfive_hdmi_encoder_mode_set(struct drm_encoder *encoder,
+					   struct drm_display_mode *mode,
+					   struct drm_display_mode *adj_mode)
+{
+	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
+
+	starfive_hdmi_setup(hdmi, adj_mode);
+
+	memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi->previous_mode));
+}
+
+static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
+
+	pm_runtime_get_sync(hdmi->dev);
+}
+
+static void starfive_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+	struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
+
+	pm_runtime_put(hdmi->dev);
+}
+
+static bool starfive_hdmi_encoder_mode_fixup(struct drm_encoder *encoder,
+					     const struct drm_display_mode *mode,
+					     struct drm_display_mode *adj_mode)
+{
+	return true;
+}
+
+static int
+starfive_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
+				   struct drm_crtc_state *crtc_state,
+				   struct drm_connector_state *conn_state)
+{
+	return 0;
+}
+
+static const struct drm_encoder_helper_funcs starfive_hdmi_encoder_helper_funcs = {
+	.enable     = starfive_hdmi_encoder_enable,
+	.disable    = starfive_hdmi_encoder_disable,
+	.mode_fixup = starfive_hdmi_encoder_mode_fixup,
+	.mode_set   = starfive_hdmi_encoder_mode_set,
+	.atomic_check = starfive_hdmi_encoder_atomic_check,
+};
+
+static enum drm_connector_status
+starfive_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
+	int ret;
+
+	ret = pm_runtime_get_sync(hdmi->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = (hdmi_readb(hdmi, HDMI_STATUS) & m_HOTPLUG) ?
+		connector_status_connected : connector_status_disconnected;
+
+	pm_runtime_put(hdmi->dev);
+
+	return ret;
+}
+
+static int starfive_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+	struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
+	struct edid *edid;
+	int ret = 0;
+
+	if (!hdmi->ddc)
+		return 0;
+
+	edid = drm_get_edid(connector, hdmi->ddc);
+	if (edid) {
+		hdmi->hdmi_data.sink_is_hdmi = drm_detect_hdmi_monitor(edid);
+		hdmi->hdmi_data.sink_has_audio = drm_detect_monitor_audio(edid);
+		drm_connector_update_edid_property(connector, edid);
+		ret = drm_add_edid_modes(connector, edid);
+		kfree(edid);
+	}
+
+	return ret;
+}
+
+static enum drm_mode_status
+starfive_hdmi_connector_mode_valid(struct drm_connector *connector,
+				   struct drm_display_mode *mode)
+{
+	const struct pre_pll_config *cfg = pre_pll_cfg_table;
+	int pclk = mode->clock * 1000;
+	bool valid = false;
+	int i;
+
+	for (i = 0; cfg[i].pixclock != (~0UL); i++) {
+		if (pclk == cfg[i].pixclock) {
+			if (pclk > 297000000)
+				continue;
+
+			valid = true;
+			break;
+		}
+	}
+
+	return (valid) ? MODE_OK : MODE_BAD;
+}
+
+static int
+starfive_hdmi_probe_single_connector_modes(struct drm_connector *connector,
+					   u32 maxX, u32 maxY)
+{
+	struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
+	int ret;
+
+	pm_runtime_get_sync(hdmi->dev);
+
+	ret = drm_helper_probe_single_connector_modes(connector, 3840, 2160);
+
+	pm_runtime_put(hdmi->dev);
+
+	return ret;
+}
+
+static void starfive_hdmi_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs starfive_hdmi_connector_funcs = {
+	.fill_modes = starfive_hdmi_probe_single_connector_modes,
+	.detect = starfive_hdmi_connector_detect,
+	.destroy = starfive_hdmi_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static struct drm_connector_helper_funcs starfive_hdmi_connector_helper_funcs = {
+	.get_modes = starfive_hdmi_connector_get_modes,
+	.mode_valid = starfive_hdmi_connector_mode_valid,
+};
+
+static int starfive_hdmi_register(struct drm_device *drm, struct starfive_hdmi *hdmi)
+{
+	struct drm_encoder *encoder = &hdmi->encoder;
+	struct device *dev = hdmi->dev;
+
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+
+	/*
+	 * If we failed to find the CRTC(s) which this encoder is
+	 * supposed to be connected to, it's because the CRTC has
+	 * not been registered yet.  Defer probing, and hope that
+	 * the required CRTC is added later.
+	 */
+	if (encoder->possible_crtcs == 0)
+		return -EPROBE_DEFER;
+
+	drm_encoder_helper_add(encoder, &starfive_hdmi_encoder_helper_funcs);
+	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
+
+	hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_helper_add(&hdmi->connector,
+				 &starfive_hdmi_connector_helper_funcs);
+	drm_connector_init_with_ddc(drm, &hdmi->connector,
+				    &starfive_hdmi_connector_funcs,
+				    DRM_MODE_CONNECTOR_HDMIA,
+				    hdmi->ddc);
+
+	drm_connector_attach_encoder(&hdmi->connector, encoder);
+
+	return 0;
+}
+
+static irqreturn_t starfive_hdmi_i2c_irq(struct starfive_hdmi *hdmi)
+{
+	struct starfive_hdmi_i2c *i2c = hdmi->i2c;
+	u8 stat;
+
+	stat = hdmi_readb(hdmi, HDMI_INTERRUPT_STATUS1);
+	if (!(stat & m_INT_EDID_READY))
+		return IRQ_NONE;
+
+	/* Clear HDMI EDID interrupt flag */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+
+	complete(&i2c->cmp);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t starfive_hdmi_hardirq(int irq, void *dev_id)
+{
+	struct starfive_hdmi *hdmi = dev_id;
+	irqreturn_t ret = IRQ_NONE;
+	u8 interrupt;
+
+	if (hdmi->i2c)
+		ret = starfive_hdmi_i2c_irq(hdmi);
+
+	interrupt = hdmi_readb(hdmi, HDMI_STATUS);
+	if (interrupt & m_INT_HOTPLUG) {
+		hdmi_modb(hdmi, HDMI_STATUS, m_INT_HOTPLUG, m_INT_HOTPLUG);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+static irqreturn_t starfive_hdmi_irq(int irq, void *dev_id)
+{
+	struct starfive_hdmi *hdmi = dev_id;
+
+	drm_helper_hpd_irq_event(hdmi->connector.dev);
+
+	return IRQ_HANDLED;
+}
+
+static int starfive_hdmi_i2c_read(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
+{
+	int length = msgs->len;
+	u8 *buf = msgs->buf;
+	int ret;
+
+	ret = wait_for_completion_timeout(&hdmi->i2c->cmp, HZ / 10);
+	if (!ret)
+		return -EAGAIN;
+
+	while (length--)
+		*buf++ = hdmi_readb(hdmi, HDMI_EDID_FIFO_ADDR);
+
+	return 0;
+}
+
+static int starfive_hdmi_i2c_write(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
+{
+	/*
+	 * The DDC module only support read EDID message, so
+	 * we assume that each word write to this i2c adapter
+	 * should be the offset of EDID word address.
+	 */
+	if (msgs->len != 1 ||
+	    (msgs->addr != DDC_ADDR && msgs->addr != DDC_SEGMENT_ADDR))
+		return -EINVAL;
+
+	reinit_completion(&hdmi->i2c->cmp);
+
+	if (msgs->addr == DDC_SEGMENT_ADDR)
+		hdmi->i2c->segment_addr = msgs->buf[0];
+	if (msgs->addr == DDC_ADDR)
+		hdmi->i2c->ddc_addr = msgs->buf[0];
+
+	/* Set edid fifo first addr */
+	hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
+
+	/* Set edid word address 0x00/0x80 */
+	hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
+
+	/* Set edid segment pointer */
+	hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
+
+	return 0;
+}
+
+static int starfive_hdmi_i2c_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs, int num)
+{
+	struct starfive_hdmi *hdmi = i2c_get_adapdata(adap);
+	struct starfive_hdmi_i2c *i2c = hdmi->i2c;
+	int i, ret = 0;
+
+	mutex_lock(&i2c->lock);
+
+	/* Clear the EDID interrupt flag and unmute the interrupt */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, m_INT_EDID_READY);
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+
+	for (i = 0; i < num; i++) {
+		DRM_DEV_DEBUG(hdmi->dev,
+			      "xfer: num: %d/%d, len: %d, flags: %#x\n",
+			      i + 1, num, msgs[i].len, msgs[i].flags);
+
+		if (msgs[i].flags & I2C_M_RD)
+			ret = starfive_hdmi_i2c_read(hdmi, &msgs[i]);
+		else
+			ret = starfive_hdmi_i2c_write(hdmi, &msgs[i]);
+
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+	/* Mute HDMI EDID interrupt */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
+
+	mutex_unlock(&i2c->lock);
+
+	return ret;
+}
+
+static u32 starfive_hdmi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm starfive_hdmi_algorithm = {
+	.master_xfer	= starfive_hdmi_i2c_xfer,
+	.functionality	= starfive_hdmi_i2c_func,
+};
+
+static struct i2c_adapter *starfive_hdmi_i2c_adapter(struct starfive_hdmi *hdmi)
+{
+	struct i2c_adapter *adap;
+	struct starfive_hdmi_i2c *i2c;
+	int ret;
+
+	i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&i2c->lock);
+	init_completion(&i2c->cmp);
+
+	adap = &i2c->adap;
+	adap->class = I2C_CLASS_DDC;
+	adap->owner = THIS_MODULE;
+	adap->dev.parent = hdmi->dev;
+	adap->algo = &starfive_hdmi_algorithm;
+	strscpy(adap->name, "Starfive HDMI", sizeof(adap->name));
+	i2c_set_adapdata(adap, hdmi);
+
+	ret = i2c_add_adapter(adap);
+	if (ret) {
+		dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name);
+		devm_kfree(hdmi->dev, i2c);
+		return ERR_PTR(ret);
+	}
+
+	hdmi->i2c = i2c;
+
+	DRM_DEV_INFO(hdmi->dev, "registered %s I2C bus driver success\n", adap->name);
+
+	return adap;
+}
+
+static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+	hdmi->sys_clk = devm_clk_get(dev, "sysclk");
+	if (IS_ERR(hdmi->sys_clk)) {
+		DRM_DEV_ERROR(dev, "Unable to get HDMI sysclk clk\n");
+		return PTR_ERR(hdmi->sys_clk);
+	}
+	hdmi->mclk = devm_clk_get(dev, "mclk");
+	if (IS_ERR(hdmi->mclk)) {
+		DRM_DEV_ERROR(dev, "Unable to get HDMI mclk clk\n");
+		return PTR_ERR(hdmi->mclk);
+	}
+	hdmi->bclk = devm_clk_get(dev, "bclk");
+	if (IS_ERR(hdmi->bclk)) {
+		DRM_DEV_ERROR(dev, "Unable to get HDMI bclk clk\n");
+		return PTR_ERR(hdmi->bclk);
+	}
+	hdmi->tx_rst = reset_control_get_shared(dev, "hdmi_tx");
+	if (IS_ERR(hdmi->tx_rst)) {
+		DRM_DEV_ERROR(dev, "Unable to get HDMI tx rst\n");
+		return PTR_ERR(hdmi->tx_rst);
+	}
+	return 0;
+}
+
+static int starfive_hdmi_bind(struct device *dev, struct device *master,
+			      void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = data;
+	struct starfive_hdmi *hdmi;
+	struct resource *iores;
+	int irq;
+	int ret;
+
+	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+
+	hdmi->dev = dev;
+	hdmi->drm_dev = drm;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdmi->regs = devm_ioremap_resource(dev, iores);
+	if (IS_ERR(hdmi->regs))
+		return PTR_ERR(hdmi->regs);
+
+	ret = starfive_hdmi_get_clk_rst(dev, hdmi);
+	ret = starfive_hdmi_enable_clk_deassert_rst(dev, hdmi);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err_disable_clk;
+	}
+
+	hdmi->ddc = starfive_hdmi_i2c_adapter(hdmi);
+	if (IS_ERR(hdmi->ddc)) {
+		ret = PTR_ERR(hdmi->ddc);
+		hdmi->ddc = NULL;
+		goto err_disable_clk;
+	}
+
+	hdmi->tmds_rate = clk_get_rate(hdmi->sys_clk);
+
+	starfive_hdmi_i2c_init(hdmi);
+
+	ret = starfive_hdmi_register(drm, hdmi);
+	if (ret)
+		goto err_put_adapter;
+
+	dev_set_drvdata(dev, hdmi);
+
+	/* Unmute hotplug interrupt */
+	hdmi_modb(hdmi, HDMI_STATUS, m_MASK_INT_HOTPLUG, v_MASK_INT_HOTPLUG(1));
+
+	ret = devm_request_threaded_irq(dev, irq, starfive_hdmi_hardirq,
+					starfive_hdmi_irq, IRQF_SHARED,
+					dev_name(dev), hdmi);
+	if (ret < 0)
+		goto err_cleanup_hdmi;
+
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 500);
+	pm_runtime_enable(&pdev->dev);
+
+	starfive_hdmi_disable_clk_assert_rst(dev, hdmi);
+
+	return 0;
+err_cleanup_hdmi:
+	hdmi->connector.funcs->destroy(&hdmi->connector);
+	hdmi->encoder.funcs->destroy(&hdmi->encoder);
+err_put_adapter:
+	i2c_put_adapter(hdmi->ddc);
+err_disable_clk:
+	clk_disable_unprepare(hdmi->sys_clk);
+	clk_disable_unprepare(hdmi->mclk);
+	clk_disable_unprepare(hdmi->bclk);
+
+	return ret;
+}
+
+static void starfive_hdmi_unbind(struct device *dev, struct device *master,
+				 void *data)
+{
+	struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
+
+	hdmi->connector.funcs->destroy(&hdmi->connector);
+	hdmi->encoder.funcs->destroy(&hdmi->encoder);
+
+	i2c_put_adapter(hdmi->ddc);
+
+	starfive_hdmi_disable_clk_assert_rst(dev, hdmi);
+}
+
+static const struct component_ops starfive_hdmi_ops = {
+	.bind	= starfive_hdmi_bind,
+	.unbind	= starfive_hdmi_unbind,
+};
+
+static int starfive_hdmi_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &starfive_hdmi_ops);
+}
+
+static int starfive_hdmi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &starfive_hdmi_ops);
+
+	return 0;
+}
+
+static const struct dev_pm_ops hdmi_pm_ops = {
+	SET_RUNTIME_PM_OPS(hdmi_runtime_suspend, hdmi_runtime_resume, NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(hdmi_system_pm_suspend, hdmi_system_pm_resume)
+};
+
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,hdmi",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, starfive_hdmi_dt_ids);
+
+struct platform_driver starfive_hdmi_driver = {
+	.probe  = starfive_hdmi_probe,
+	.remove = starfive_hdmi_remove,
+	.driver = {
+		.name = "starfive-hdmi",
+		.of_match_table = starfive_hdmi_dt_ids,
+		.pm = &hdmi_pm_ops,
+	},
+};
+
+MODULE_AUTHOR("StarFive Corporation");
+MODULE_DESCRIPTION("Starfive HDMI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.h b/drivers/gpu/drm/verisilicon/starfive_hdmi.h
new file mode 100644
index 000000000000..d151c61f9a3e
--- /dev/null
+++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.h
@@ -0,0 +1,296 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#ifndef __STARFIVE_HDMI_H__
+#define __STARFIVE_HDMI_H__
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#define DDC_SEGMENT_ADDR		0x30
+
+#define HDMI_SCL_RATE			(100 * 1000)
+#define DDC_BUS_FREQ_L			0x4b
+#define DDC_BUS_FREQ_H			0x4c
+
+#define HDMI_SYS_CTRL			0x00
+#define m_RST_ANALOG			BIT(6)
+#define v_RST_ANALOG			0
+#define v_NOT_RST_ANALOG		BIT(6)
+#define m_RST_DIGITAL			BIT(5)
+#define v_RST_DIGITAL			0
+#define v_NOT_RST_DIGITAL		BIT(5)
+#define m_REG_CLK_INV			BIT(4)
+#define v_REG_CLK_NOT_INV		0
+#define v_REG_CLK_INV			BIT(4)
+#define m_VCLK_INV			BIT(3)
+#define v_VCLK_NOT_INV			0
+#define v_VCLK_INV			BIT(3)
+#define m_REG_CLK_SOURCE		BIT(2)
+#define v_REG_CLK_SOURCE_TMDS		0
+#define v_REG_CLK_SOURCE_SYS		BIT(2)
+#define m_POWER				BIT(1)
+#define v_PWR_ON			0
+#define v_PWR_OFF			BIT(1)
+#define m_INT_POL			BIT(0)
+#define v_INT_POL_HIGH			1
+#define v_INT_POL_LOW			0
+
+#define HDMI_AV_MUTE			0x05
+#define m_AVMUTE_CLEAR			BIT(7)
+#define m_AVMUTE_ENABLE			BIT(6)
+#define m_AUDIO_MUTE			BIT(1)
+#define m_VIDEO_BLACK			BIT(0)
+#define v_AVMUTE_CLEAR(n)		((n) << 7)
+#define v_AVMUTE_ENABLE(n)		((n) << 6)
+#define v_AUDIO_MUTE(n)			((n) << 1)
+#define v_VIDEO_MUTE(n)			((n) << 0)
+
+#define HDMI_VIDEO_TIMING_CTL		0x08
+#define v_VSYNC_POLARITY(n)		((n) << 3)
+#define v_HSYNC_POLARITY(n)		((n) << 2)
+#define v_INETLACE(n)			((n) << 1)
+#define v_EXTERANL_VIDEO(n)		((n) << 0)
+
+#define HDMI_VIDEO_EXT_HTOTAL_L		0x09
+#define HDMI_VIDEO_EXT_HTOTAL_H		0x0a
+#define HDMI_VIDEO_EXT_HBLANK_L		0x0b
+#define HDMI_VIDEO_EXT_HBLANK_H		0x0c
+#define HDMI_VIDEO_EXT_HDELAY_L		0x0d
+#define HDMI_VIDEO_EXT_HDELAY_H		0x0e
+#define HDMI_VIDEO_EXT_HDURATION_L	0x0f
+#define HDMI_VIDEO_EXT_HDURATION_H	0x10
+#define HDMI_VIDEO_EXT_VTOTAL_L		0x11
+#define HDMI_VIDEO_EXT_VTOTAL_H		0x12
+#define HDMI_VIDEO_EXT_VBLANK		0x13
+#define HDMI_VIDEO_EXT_VDELAY		0x14
+#define HDMI_VIDEO_EXT_VDURATION	0x15
+
+#define HDMI_EDID_SEGMENT_POINTER	0x4d
+#define HDMI_EDID_WORD_ADDR			0x4e
+#define HDMI_EDID_FIFO_OFFSET		0x4f
+#define HDMI_EDID_FIFO_ADDR			0x50
+
+#define HDMI_INTERRUPT_MASK1		0xc0
+#define HDMI_INTERRUPT_STATUS1		0xc1
+#define	m_INT_ACTIVE_VSYNC			BIT(5)
+#define m_INT_EDID_READY			BIT(2)
+
+#define HDMI_STATUS					0xc8
+#define m_HOTPLUG					BIT(7)
+#define m_MASK_INT_HOTPLUG			BIT(5)
+#define m_INT_HOTPLUG				BIT(1)
+#define v_MASK_INT_HOTPLUG(n)		(((n) & 0x1) << 5)
+
+#define HDMI_SYNC					0xce
+
+#define UPDATE(x, h, l)\
+({\
+	typeof(x) x_ = (x);\
+	typeof(h) h_ = (h);\
+	typeof(l) l_ = (l);\
+	(((x_) << (l_)) & GENMASK((h_), (l_)));\
+})
+
+/* REG: 0x1a0 */
+#define STARFIVE_PRE_PLL_CONTROL			0x1a0
+#define STARFIVE_PCLK_VCO_DIV_5_MASK			BIT(1)
+#define STARFIVE_PCLK_VCO_DIV_5(x)			UPDATE(x, 1, 1)
+#define STARFIVE_PRE_PLL_POWER_DOWN			BIT(0)
+
+/* REG: 0x1a1 */
+#define STARFIVE_PRE_PLL_DIV_1				0x1a1
+#define STARFIVE_PRE_PLL_PRE_DIV_MASK			GENMASK(5, 0)
+#define STARFIVE_PRE_PLL_PRE_DIV(x)			UPDATE(x, 5, 0)
+
+/* REG: 0x1a2 */
+#define STARFIVE_PRE_PLL_DIV_2				0x1a2
+#define STARFIVE_SPREAD_SPECTRUM_MOD_DOWN		BIT(7)
+#define STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE		BIT(6)
+#define STARFIVE_PRE_PLL_FRAC_DIV_DISABLE		UPDATE(3, 5, 4)
+#define STARFIVE_PRE_PLL_FB_DIV_11_8_MASK		GENMASK(3, 0)
+#define STARFIVE_PRE_PLL_FB_DIV_11_8(x)			UPDATE((x) >> 8, 3, 0)
+
+/* REG: 0x1a3 */
+#define STARFIVE_PRE_PLL_DIV_3				0x1a3
+#define STARFIVE_PRE_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
+
+/* REG: 0x1a4*/
+#define STARFIVE_PRE_PLL_DIV_4				0x1a4
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_C_MASK		GENMASK(1, 0)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_C(x)		UPDATE(x, 1, 0)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_B_MASK		GENMASK(3, 2)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_B(x)		UPDATE(x, 3, 2)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_A_MASK		GENMASK(5, 4)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_A(x)		UPDATE(x, 5, 4)
+
+/* REG: 0x1a5 */
+#define STARFIVE_PRE_PLL_DIV_5				0x1a5
+#define STARFIVE_PRE_PLL_PCLK_DIV_B_SHIFT		5
+#define STARFIVE_PRE_PLL_PCLK_DIV_B_MASK		GENMASK(6, 5)
+#define STARFIVE_PRE_PLL_PCLK_DIV_B(x)			UPDATE(x, 6, 5)
+#define STARFIVE_PRE_PLL_PCLK_DIV_A_MASK		GENMASK(4, 0)
+#define STARFIVE_PRE_PLL_PCLK_DIV_A(x)			UPDATE(x, 4, 0)
+
+/* REG: 0x1a6 */
+#define STARFIVE_PRE_PLL_DIV_6				0x1a6
+#define STARFIVE_PRE_PLL_PCLK_DIV_C_SHIFT		5
+#define STARFIVE_PRE_PLL_PCLK_DIV_C_MASK		GENMASK(6, 5)
+#define STARFIVE_PRE_PLL_PCLK_DIV_C(x)			UPDATE(x, 6, 5)
+#define STARFIVE_PRE_PLL_PCLK_DIV_D_MASK		GENMASK(4, 0)
+#define STARFIVE_PRE_PLL_PCLK_DIV_D(x)			UPDATE(x, 4, 0)
+
+/* REG: 0x1a9 */
+#define STARFIVE_PRE_PLL_LOCK_STATUS			0x1a9
+
+/* REG: 0x1aa */
+#define STARFIVE_POST_PLL_DIV_1				0x1aa
+#define STARFIVE_POST_PLL_POST_DIV_ENABLE		GENMASK(3, 2)
+#define STARFIVE_POST_PLL_REFCLK_SEL_TMDS		BIT(1)
+#define STARFIVE_POST_PLL_POWER_DOWN			BIT(0)
+#define STARFIVE_POST_PLL_FB_DIV_8(x)			UPDATE(((x) >> 8) << 4, 4, 4)
+
+/* REG:0x1ab */
+#define STARFIVE_POST_PLL_DIV_2				0x1ab
+#define STARFIVE_POST_PLL_Pre_DIV_MASK			GENMASK(5, 0)
+#define STARFIVE_POST_PLL_PRE_DIV(x)			UPDATE(x, 5, 0)
+
+/* REG: 0x1ac */
+#define STARFIVE_POST_PLL_DIV_3				0x1ac
+#define STARFIVE_POST_PLL_FB_DIV_7_0(x)			UPDATE(x, 7, 0)
+
+/* REG: 0x1ad */
+#define STARFIVE_POST_PLL_DIV_4				0x1ad
+#define STARFIVE_POST_PLL_POST_DIV_MASK			GENMASK(2, 0)
+#define STARFIVE_POST_PLL_POST_DIV_2			0x0
+#define STARFIVE_POST_PLL_POST_DIV_4			0x1
+#define STARFIVE_POST_PLL_POST_DIV_8			0x3
+
+/* REG: 0x1af */
+#define STARFIVE_POST_PLL_LOCK_STATUS			0x1af
+
+/* REG: 0x1b0 */
+#define STARFIVE_BIAS_CONTROL				0x1b0
+#define STARFIVE_BIAS_ENABLE				BIT(2)
+
+/* REG: 0x1b2 */
+#define STARFIVE_TMDS_CONTROL				0x1b2
+#define STARFIVE_TMDS_CLK_DRIVER_EN			BIT(3)
+#define STARFIVE_TMDS_D2_DRIVER_EN			BIT(2)
+#define STARFIVE_TMDS_D1_DRIVER_EN			BIT(1)
+#define STARFIVE_TMDS_D0_DRIVER_EN			BIT(0)
+#define STARFIVE_TMDS_DRIVER_ENABLE			(STARFIVE_TMDS_CLK_DRIVER_EN | \
+							 STARFIVE_TMDS_D2_DRIVER_EN | \
+							 STARFIVE_TMDS_D1_DRIVER_EN | \
+							 STARFIVE_TMDS_D0_DRIVER_EN)
+
+/* REG: 0x1b4 */
+#define STARFIVE_LDO_CONTROL				0x1b4
+#define STARFIVE_LDO_D2_EN				BIT(2)
+#define STARFIVE_LDO_D1_EN				BIT(1)
+#define STARFIVE_LDO_D0_EN				BIT(0)
+#define STARFIVE_LDO_ENABLE				(STARFIVE_LDO_D2_EN | \
+							 STARFIVE_LDO_D1_EN | \
+							 STARFIVE_LDO_D0_EN)
+
+/* REG: 0x1be */
+#define STARFIVE_SERIALIER_CONTROL			0x1be
+#define STARFIVE_SERIALIER_D2_EN			BIT(6)
+#define STARFIVE_SERIALIER_D1_EN			BIT(5)
+#define STARFIVE_SERIALIER_D0_EN			BIT(4)
+#define STARFIVE_SERIALIER_ENABLE			(STARFIVE_SERIALIER_D2_EN | \
+							 STARFIVE_SERIALIER_D1_EN | \
+							  STARFIVE_SERIALIER_D0_EN)
+
+/* REG: 0x1cc */
+#define STARFIVE_RX_CONTROL				0x1cc
+#define STARFIVE_RX_EN					BIT(3)
+#define STARFIVE_RX_CHANNEL_2_EN			BIT(2)
+#define STARFIVE_RX_CHANNEL_1_EN			BIT(1)
+#define STARFIVE_RX_CHANNEL_0_EN			BIT(0)
+#define STARFIVE_RX_ENABLE				(STARFIVE_RX_EN | \
+							 STARFIVE_RX_CHANNEL_2_EN | \
+							 STARFIVE_RX_CHANNEL_1_EN | \
+							 STARFIVE_RX_CHANNEL_0_EN)
+
+/* REG: 0x1d1 */
+#define STARFIVE_PRE_PLL_FRAC_DIV_H			0x1d1
+#define STARFIVE_PRE_PLL_FRAC_DIV_23_16(x)		UPDATE((x) >> 16, 7, 0)
+/* REG: 0x1d2 */
+#define STARFIVE_PRE_PLL_FRAC_DIV_M			0x1d2
+#define STARFIVE_PRE_PLL_FRAC_DIV_15_8(x)		UPDATE((x) >> 8, 7, 0)
+/* REG: 0x1d3 */
+#define STARFIVE_PRE_PLL_FRAC_DIV_L			0x1d3
+#define STARFIVE_PRE_PLL_FRAC_DIV_7_0(x)		UPDATE(x, 7, 0)
+
+struct pre_pll_config {
+	unsigned long pixclock;
+	unsigned long tmdsclock;
+	u8 prediv;
+	u16 fbdiv;
+	u8 tmds_div_a;
+	u8 tmds_div_b;
+	u8 tmds_div_c;
+	u8 pclk_div_a;
+	u8 pclk_div_b;
+	u8 pclk_div_c;
+	u8 pclk_div_d;
+	u8 vco_div_5_en;
+	u32 fracdiv;
+};
+
+struct post_pll_config {
+	unsigned long tmdsclock;
+	u8 prediv;
+	u16 fbdiv;
+	u8 postdiv;
+	u8 post_div_en;
+	u8 version;
+};
+
+struct phy_config {
+	unsigned long	tmdsclock;
+	u8		regs[14];
+};
+
+struct hdmi_data_info {
+	int vic;
+	bool sink_is_hdmi;
+	bool sink_has_audio;
+	unsigned int enc_in_format;
+	unsigned int enc_out_format;
+	unsigned int colorimetry;
+};
+
+struct starfive_hdmi {
+	struct device *dev;
+	struct drm_device *drm_dev;
+
+	int irq;
+	struct clk *sys_clk;
+	struct clk *mclk;
+	struct clk *bclk;
+	struct reset_control *tx_rst;
+	void __iomem *regs;
+
+	struct drm_connector	connector;
+	struct drm_encoder	encoder;
+
+	struct starfive_hdmi_i2c *i2c;
+	struct i2c_adapter *ddc;
+
+	unsigned long tmds_rate;
+
+	struct hdmi_data_info	hdmi_data;
+	struct drm_display_mode previous_mode;
+	const struct pre_pll_config	*pre_cfg;
+	const struct post_pll_config	*post_cfg;
+};
+
+#endif /* __STARFIVE_HDMI_H__ */
diff --git a/drivers/gpu/drm/verisilicon/vs_drv.c b/drivers/gpu/drm/verisilicon/vs_drv.c
index c28bfd74ffc9..b740fe934035 100644
--- a/drivers/gpu/drm/verisilicon/vs_drv.c
+++ b/drivers/gpu/drm/verisilicon/vs_drv.c
@@ -183,6 +183,12 @@  static const struct component_master_ops vs_drm_ops = {
 
 static struct platform_driver *drm_sub_drivers[] = {
 	&dc_platform_driver,
+
+	/* connector + encoder*/
+#ifdef CONFIG_STARFIVE_HDMI
+	&starfive_hdmi_driver,
+#endif
+
 };
 
 #define NUM_DRM_DRIVERS \
diff --git a/drivers/gpu/drm/verisilicon/vs_drv.h b/drivers/gpu/drm/verisilicon/vs_drv.h
index 0382b44e3bf0..3668e1d65b3f 100644
--- a/drivers/gpu/drm/verisilicon/vs_drv.h
+++ b/drivers/gpu/drm/verisilicon/vs_drv.h
@@ -45,4 +45,8 @@  static inline bool is_iommu_enabled(struct drm_device *dev)
 	return priv->domain ? true : false;
 }
 
+#ifdef CONFIG_STARFIVE_HDMI
+extern struct platform_driver starfive_hdmi_driver;
+#endif
+
 #endif /* __VS_DRV_H__ */