diff mbox series

[3/3] arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile

Message ID 20230705065744.25848-4-jason-ch.chen@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add basic node support for MediaTek MT8188 SoC | expand

Commit Message

Jason Chen July 5, 2023, 6:57 a.m. UTC
From: jason-ch chen <Jason-ch.Chen@mediatek.com>

MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.

We add basic chip support for MediaTek MT8188 on evaluation board.

Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 402 +++++++++
 arch/arm64/boot/dts/mediatek/mt8188.dtsi    | 926 ++++++++++++++++++++
 3 files changed, 1329 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi

Comments

AngeloGioacchino Del Regno July 5, 2023, 8:25 a.m. UTC | #1
Il 05/07/23 08:57, Jason-ch Chen ha scritto:
> From: jason-ch chen <Jason-ch.Chen@mediatek.com>
> 
> MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
> and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
> 
> We add basic chip support for MediaTek MT8188 on evaluation board.
> 
> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/Makefile       |   1 +
>   arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 402 +++++++++
>   arch/arm64/boot/dts/mediatek/mt8188.dtsi    | 926 ++++++++++++++++++++
>   3 files changed, 1329 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index c99c3372a4b5..9bd2324259a3 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> new file mode 100644
> index 000000000000..d3872196200a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> @@ -0,0 +1,402 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2023 MediaTek Inc.
> + */
> +/dts-v1/;
> +#include "mt8188.dtsi"
> +#include "mt6359.dtsi"
> +
> +/ {
> +	model = "MediaTek MT8188 evaluation board";
> +	compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
> +
> +	aliases {
> +		serial0 = &uart0;
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +		i2c2 = &i2c2;
> +		i2c3 = &i2c3;
> +		i2c4 = &i2c4;
> +		i2c5 = &i2c5;
> +		i2c6 = &i2c6;
> +		mmc0 = &mmc0;
> +	};
> +
> +	chosen: chosen {
> +		stdout-path = "serial0:115200n8";
> +		kaslr-seed = <0 0>;
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0x80000000>;
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		scp_mem_reserved: scp_mem_region {
> +			compatible = "shared-dma-pool";
> +			reg = <0 0x50000000 0 0x2900000>;
> +			no-map;
> +		};
> +	};
> +};
> +
> +&auxadc {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pins>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c3_pins>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c4_pins>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c5 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c5_pins>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c6_pins>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	status = "okay";
> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&mmc0_default_pins>;
> +	pinctrl-1 = <&mmc0_uhs_pins>;
> +	bus-width = <8>;
> +	max-frequency = <200000000>;
> +	cap-mmc-highspeed;
> +	mmc-hs200-1_8v;
> +	mmc-hs400-1_8v;
> +	supports-cqe;
> +	cap-mmc-hw-reset;
> +	no-sdio;
> +	no-sd;
> +	hs400-ds-delay = <0x1481b>;
> +	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
> +	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
> +	non-removable;
> +};
> +
> +&mt6359_vbbck_ldo_reg {
> +	regulator-always-on;
> +};
> +
> +&mt6359_vcn33_2_bt_ldo_reg {
> +	regulator-always-on;
> +};
> +
> +&mt6359_vcore_buck_reg {
> +	regulator-always-on;
> +};
> +
> +&mt6359_vgpu11_buck_reg {
> +	regulator-always-on;
> +};
> +
> +&mt6359_vpu_buck_reg {
> +	regulator-always-on;
> +};
> +
> +&mt6359_vrf12_ldo_reg {
> +	regulator-always-on;
> +};
> +
> +&mt6359_vufs_ldo_reg {
> +	regulator-always-on;
> +};
> +
> +&nor_flash {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&nor_pins_default>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-max-frequency = <52000000>;
> +	};
> +};
> +
> +&pio {
> +	adsp_uart_pins: adsp-uart-pins {
> +		pins_adsp_uart {

Please, no underscores. This should be `pins-adsp-uart`

> +			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
> +				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
> +		};
> +	};
> +
> +	i2c0_pins: i2c0-pins {
> +		pins_bus {

pins-bus

> +			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
> +				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
> +			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
> +		};
> +	};
> +

..snip..

> +
> +	mmc0_default_pins: mmc0-default-pins {
> +		pins_cmd_dat {

pins-cmd-dat

> +			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
> +				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
> +				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
> +				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
> +				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
> +				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
> +				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
> +				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
> +				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
> +			input-enable;
> +			drive-strength = <MTK_DRIVE_6mA>;

You don't need the MTK_DRIVE_(x)mA definitions here because:
1. The drive-strength property expresses values in milliamperes,
    for more information, check its description at pincfg-node.yaml;
2. Those definitions are mapping to mA values anyway, so, for example,
    MTK_DRIVE_6mA == 6, MTK_DRIVE_28mA == 28, etc.

This means that you can write this as:

			drive-strength = <6>;

please fix.

> +			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> +		};
> +

..snip..

> +
> +&pmic {
> +	interrupt-parent = <&pio>;
> +	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;

You can do that in one line instead:

	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;

> +};
> +
> +&scp {
> +	memory-region = <&scp_mem_reserved>;
> +	status = "okay";
> +};
> +

..snip..

> diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> new file mode 100644
> index 000000000000..8f042ffe0938
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> @@ -0,0 +1,926 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2023 MediaTek Inc.
> + *
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/mediatek,mt8188-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
> +#include <dt-bindings/power/mediatek,mt8188-power.h>
> +
> +/ {
> +	compatible = "mediatek,mt8188";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x000>;
> +			enable-method = "psci";
> +			clock-frequency = <2000000000>;
> +			capacity-dmips-mhz = <282>;
> +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;

Can you please populate the cache properties?

i-cache-size, i-cache-line-size, i-cache-sets,
d-cache-size, d-cache-line-size, d-cache-sets are missing for all CPUs.

> +			next-level-cache = <&l2_0>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x100>;
> +			enable-method = "psci";
> +			clock-frequency = <2000000000>;
> +			capacity-dmips-mhz = <282>;
> +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> +			next-level-cache = <&l2_0>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x200>;
> +			enable-method = "psci";
> +			clock-frequency = <2000000000>;
> +			capacity-dmips-mhz = <282>;
> +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> +			next-level-cache = <&l2_0>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x300>;
> +			enable-method = "psci";
> +			clock-frequency = <2000000000>;
> +			capacity-dmips-mhz = <282>;
> +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> +			next-level-cache = <&l2_0>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu4: cpu@400 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x400>;
> +			enable-method = "psci";
> +			clock-frequency = <2000000000>;
> +			capacity-dmips-mhz = <282>;
> +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> +			next-level-cache = <&l2_0>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu5: cpu@500 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x500>;
> +			enable-method = "psci";
> +			clock-frequency = <2000000000>;
> +			capacity-dmips-mhz = <282>;
> +			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> +			next-level-cache = <&l2_0>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu6: cpu@600 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a78";
> +			reg = <0x600>;
> +			enable-method = "psci";
> +			clock-frequency = <2600000000>;
> +			capacity-dmips-mhz = <1024>;
> +			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> +			next-level-cache = <&l2_1>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu7: cpu@700 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a78";
> +			reg = <0x700>;
> +			enable-method = "psci";
> +			clock-frequency = <2600000000>;
> +			capacity-dmips-mhz = <1024>;
> +			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> +			next-level-cache = <&l2_1>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +
> +				core2 {
> +					cpu = <&cpu2>;
> +				};
> +
> +				core3 {
> +					cpu = <&cpu3>;
> +				};
> +
> +				core4 {
> +					cpu = <&cpu4>;
> +				};
> +
> +				core5 {
> +					cpu = <&cpu5>;
> +				};
> +			};
> +
> +			cluster1 {

This is wrong. This SoC uses ARM DynamIQ and combines both the big and LITTLE
CPUs in *one* single cluster.
Please fix.

> +				core0 {
> +					cpu = <&cpu6>;
> +				};
> +
> +				core1 {
> +					cpu = <&cpu7>;
> +				};
> +			};
> +		};
> +

..snip..


> +
> +		pwrap: pwrap@10024000 {
> +			compatible = "mediatek,mt8195-pwrap", "syscon";

Please:

compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon";

> +			reg = <0 0x10024000 0 0x1000>;
> +			reg-names = "pwrap";
> +			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
> +				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
> +			clock-names = "spi", "wrap";
> +		};
> +

..snip..

> +		uart0: serial@11001100 {
> +			compatible = "mediatek,mt8188-uart",
> +				     "mediatek,mt6577-uart";

Those compatible strings fit in one line. 85 columns is ok.

> +			reg = <0 0x11001100 0 0x100>;
> +			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +

..snip..

> +
> +		auxadc: adc@11002000 {
> +			compatible = "mediatek,mt8188-auxadc",
> +				     "mediatek,mt8173-auxadc";

89 columns is ok, fits in one line.

> +			reg = <0 0x11002000 0 0x1000>;
> +			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
> +			clock-names = "main";
> +			#io-channel-cells = <1>;
> +			status = "disabled";
> +		};
> +
> +		pericfg_ao: syscon@11003000 {
> +			compatible = "mediatek,mt8188-pericfg-ao", "syscon";
> +			reg = <0 0x11003000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		spi0: spi@1100a000 {
> +			compatible = "mediatek,mt8188-spi-ipm",
> +				     "mediatek,spi-ipm";

Fits in one line.

> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0 0x1100a000 0 0x1000>;
> +			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
> +				 <&topckgen CLK_TOP_SPI>,
> +				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
> +			clock-names = "parent-clk", "sel-clk", "spi-clk";
> +			status = "disabled";
> +		};
> +

..snip..

> +
> +		xhci1: usb@11200000 {
> +			compatible = "mediatek,mt8188-xhci",
> +				     "mediatek,mtk-xhci";

Fits in one line again.

> +			reg = <0 0x11200000 0 0x1000>,
> +			      <0 0x11203e00 0 0x0100>;
> +			reg-names = "mac", "ippc";
> +			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
> +			phys = <&u2port1 PHY_TYPE_USB2>,
> +			       <&u3port1 PHY_TYPE_USB3>;
> +			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
> +					  <&topckgen CLK_TOP_SSUSB_XHCI>;
> +			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
> +						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> +			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
> +				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
> +				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
> +			clock-names = "sys_ck", "ref_ck", "mcu_ck";
> +			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
> +			wakeup-source;
> +			status = "disabled";
> +		};
> +
> +		mmc0: mmc@11230000 {
> +			compatible = "mediatek,mt8188-mmc",
> +				     "mediatek,mt8183-mmc";

same here.

> +			reg = <0 0x11230000 0 0x10000>,
> +			      <0 0x11f50000 0 0x1000>;
> +			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&topckgen CLK_TOP_MSDC50_0>,
> +				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
> +				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
> +				 <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
> +			clock-names = "source", "hclk", "source_cg", "crypto_clk";
> +			status = "disabled";
> +		};
> +

..snip..

> +
> +		xhci2: usb@112a0000 {
> +			compatible = "mediatek,mt8188-xhci",
> +				     "mediatek,mtk-xhci";

and here, and somewhere else as well.

Regards,
Angelo
Jason Chen July 6, 2023, 3 a.m. UTC | #2
Hi Angelo,

Thanks. I will fix in the next version.

Regards,
Jason

On Wed, 2023-07-05 at 10:25 +0200, AngeloGioacchino Del Regno wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  Il 05/07/23 08:57, Jason-ch Chen ha scritto:
> > From: jason-ch chen <Jason-ch.Chen@mediatek.com>
> > 
> > MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6
> CA55
> > and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
> > 
> > We add basic chip support for MediaTek MT8188 on evaluation board.
> > 
> > Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/Makefile       |   1 +
> >   arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 402 +++++++++
> >   arch/arm64/boot/dts/mediatek/mt8188.dtsi    | 926
> ++++++++++++++++++++
> >   3 files changed, 1329 insertions(+)
> >   create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> >   create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile
> b/arch/arm64/boot/dts/mediatek/Makefile
> > index c99c3372a4b5..9bd2324259a3 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-
> krane-sku0.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
> >   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> > new file mode 100644
> > index 000000000000..d3872196200a
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> > @@ -0,0 +1,402 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Copyright (C) 2023 MediaTek Inc.
> > + */
> > +/dts-v1/;
> > +#include "mt8188.dtsi"
> > +#include "mt6359.dtsi"
> > +
> > +/ {
> > +model = "MediaTek MT8188 evaluation board";
> > +compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
> > +
> > +aliases {
> > +serial0 = &uart0;
> > +i2c0 = &i2c0;
> > +i2c1 = &i2c1;
> > +i2c2 = &i2c2;
> > +i2c3 = &i2c3;
> > +i2c4 = &i2c4;
> > +i2c5 = &i2c5;
> > +i2c6 = &i2c6;
> > +mmc0 = &mmc0;
> > +};
> > +
> > +chosen: chosen {
> > +stdout-path = "serial0:115200n8";
> > +kaslr-seed = <0 0>;
> > +};
> > +
> > +memory@40000000 {
> > +device_type = "memory";
> > +reg = <0 0x40000000 0 0x80000000>;
> > +};
> > +
> > +reserved_memory: reserved-memory {
> > +#address-cells = <2>;
> > +#size-cells = <2>;
> > +ranges;
> > +
> > +scp_mem_reserved: scp_mem_region {
> > +compatible = "shared-dma-pool";
> > +reg = <0 0x50000000 0 0x2900000>;
> > +no-map;
> > +};
> > +};
> > +};
> > +
> > +&auxadc {
> > +status = "okay";
> > +};
> > +
> > +&i2c0 {
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&i2c0_pins>;
> > +clock-frequency = <400000>;
> > +status = "okay";
> > +};
> > +
> > +&i2c1 {
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&i2c1_pins>;
> > +clock-frequency = <400000>;
> > +status = "okay";
> > +};
> > +
> > +&i2c2 {
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&i2c2_pins>;
> > +clock-frequency = <400000>;
> > +status = "okay";
> > +};
> > +
> > +&i2c3 {
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&i2c3_pins>;
> > +clock-frequency = <400000>;
> > +status = "okay";
> > +};
> > +
> > +&i2c4 {
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&i2c4_pins>;
> > +clock-frequency = <400000>;
> > +status = "okay";
> > +};
> > +
> > +&i2c5 {
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&i2c5_pins>;
> > +clock-frequency = <400000>;
> > +status = "okay";
> > +};
> > +
> > +&i2c6 {
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&i2c6_pins>;
> > +clock-frequency = <400000>;
> > +status = "okay";
> > +};
> > +
> > +&mmc0 {
> > +status = "okay";
> > +pinctrl-names = "default", "state_uhs";
> > +pinctrl-0 = <&mmc0_default_pins>;
> > +pinctrl-1 = <&mmc0_uhs_pins>;
> > +bus-width = <8>;
> > +max-frequency = <200000000>;
> > +cap-mmc-highspeed;
> > +mmc-hs200-1_8v;
> > +mmc-hs400-1_8v;
> > +supports-cqe;
> > +cap-mmc-hw-reset;
> > +no-sdio;
> > +no-sd;
> > +hs400-ds-delay = <0x1481b>;
> > +vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
> > +vqmmc-supply = <&mt6359_vufs_ldo_reg>;
> > +non-removable;
> > +};
> > +
> > +&mt6359_vbbck_ldo_reg {
> > +regulator-always-on;
> > +};
> > +
> > +&mt6359_vcn33_2_bt_ldo_reg {
> > +regulator-always-on;
> > +};
> > +
> > +&mt6359_vcore_buck_reg {
> > +regulator-always-on;
> > +};
> > +
> > +&mt6359_vgpu11_buck_reg {
> > +regulator-always-on;
> > +};
> > +
> > +&mt6359_vpu_buck_reg {
> > +regulator-always-on;
> > +};
> > +
> > +&mt6359_vrf12_ldo_reg {
> > +regulator-always-on;
> > +};
> > +
> > +&mt6359_vufs_ldo_reg {
> > +regulator-always-on;
> > +};
> > +
> > +&nor_flash {
> > +status = "okay";
> > +pinctrl-names = "default";
> > +pinctrl-0 = <&nor_pins_default>;
> > +#address-cells = <1>;
> > +#size-cells = <0>;
> > +
> > +flash@0 {
> > +compatible = "jedec,spi-nor";
> > +reg = <0>;
> > +spi-max-frequency = <52000000>;
> > +};
> > +};
> > +
> > +&pio {
> > +adsp_uart_pins: adsp-uart-pins {
> > +pins_adsp_uart {
> 
> Please, no underscores. This should be `pins-adsp-uart`
> 
> > +pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
> > + <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
> > +};
> > +};
> > +
> > +i2c0_pins: i2c0-pins {
> > +pins_bus {
> 
> pins-bus
> 
> > +pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
> > + <PINMUX_GPIO55__FUNC_B1_SCL0>;
> > +bias-pull-up = <MTK_PULL_SET_RSEL_011>;
> > +};
> > +};
> > +
> 
> ..snip..
> 
> > +
> > +mmc0_default_pins: mmc0-default-pins {
> > +pins_cmd_dat {
> 
> pins-cmd-dat
> 
> > +pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
> > + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
> > + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
> > + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
> > + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
> > + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
> > + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
> > + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
> > + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
> > +input-enable;
> > +drive-strength = <MTK_DRIVE_6mA>;
> 
> You don't need the MTK_DRIVE_(x)mA definitions here because:
> 1. The drive-strength property expresses values in milliamperes,
>     for more information, check its description at pincfg-node.yaml;
> 2. Those definitions are mapping to mA values anyway, so, for
> example,
>     MTK_DRIVE_6mA == 6, MTK_DRIVE_28mA == 28, etc.
> 
> This means that you can write this as:
> 
> drive-strength = <6>;
> 
> please fix.
> 
> > +bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> > +};
> > +
> 
> ..snip..
> 
> > +
> > +&pmic {
> > +interrupt-parent = <&pio>;
> > +interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
> 
> You can do that in one line instead:
> 
> interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
> 
> > +};
> > +
> > +&scp {
> > +memory-region = <&scp_mem_reserved>;
> > +status = "okay";
> > +};
> > +
> 
> ..snip..
> 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > new file mode 100644
> > index 000000000000..8f042ffe0938
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > @@ -0,0 +1,926 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (c) 2023 MediaTek Inc.
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/clock/mediatek,mt8188-clk.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/phy/phy.h>
> > +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
> > +#include <dt-bindings/power/mediatek,mt8188-power.h>
> > +
> > +/ {
> > +compatible = "mediatek,mt8188";
> > +interrupt-parent = <&gic>;
> > +#address-cells = <2>;
> > +#size-cells = <2>;
> > +
> > +cpus {
> > +#address-cells = <1>;
> > +#size-cells = <0>;
> > +
> > +cpu0: cpu@0 {
> > +device_type = "cpu";
> > +compatible = "arm,cortex-a55";
> > +reg = <0x000>;
> > +enable-method = "psci";
> > +clock-frequency = <2000000000>;
> > +capacity-dmips-mhz = <282>;
> > +cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> 
> Can you please populate the cache properties?
> 
> i-cache-size, i-cache-line-size, i-cache-sets,
> d-cache-size, d-cache-line-size, d-cache-sets are missing for all
> CPUs.
> 
> > +next-level-cache = <&l2_0>;
> > +#cooling-cells = <2>;
> > +};
> > +
> > +cpu1: cpu@100 {
> > +device_type = "cpu";
> > +compatible = "arm,cortex-a55";
> > +reg = <0x100>;
> > +enable-method = "psci";
> > +clock-frequency = <2000000000>;
> > +capacity-dmips-mhz = <282>;
> > +cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +next-level-cache = <&l2_0>;
> > +#cooling-cells = <2>;
> > +};
> > +
> > +cpu2: cpu@200 {
> > +device_type = "cpu";
> > +compatible = "arm,cortex-a55";
> > +reg = <0x200>;
> > +enable-method = "psci";
> > +clock-frequency = <2000000000>;
> > +capacity-dmips-mhz = <282>;
> > +cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +next-level-cache = <&l2_0>;
> > +#cooling-cells = <2>;
> > +};
> > +
> > +cpu3: cpu@300 {
> > +device_type = "cpu";
> > +compatible = "arm,cortex-a55";
> > +reg = <0x300>;
> > +enable-method = "psci";
> > +clock-frequency = <2000000000>;
> > +capacity-dmips-mhz = <282>;
> > +cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +next-level-cache = <&l2_0>;
> > +#cooling-cells = <2>;
> > +};
> > +
> > +cpu4: cpu@400 {
> > +device_type = "cpu";
> > +compatible = "arm,cortex-a55";
> > +reg = <0x400>;
> > +enable-method = "psci";
> > +clock-frequency = <2000000000>;
> > +capacity-dmips-mhz = <282>;
> > +cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +next-level-cache = <&l2_0>;
> > +#cooling-cells = <2>;
> > +};
> > +
> > +cpu5: cpu@500 {
> > +device_type = "cpu";
> > +compatible = "arm,cortex-a55";
> > +reg = <0x500>;
> > +enable-method = "psci";
> > +clock-frequency = <2000000000>;
> > +capacity-dmips-mhz = <282>;
> > +cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > +next-level-cache = <&l2_0>;
> > +#cooling-cells = <2>;
> > +};
> > +
> > +cpu6: cpu@600 {
> > +device_type = "cpu";
> > +compatible = "arm,cortex-a78";
> > +reg = <0x600>;
> > +enable-method = "psci";
> > +clock-frequency = <2600000000>;
> > +capacity-dmips-mhz = <1024>;
> > +cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> > +next-level-cache = <&l2_1>;
> > +#cooling-cells = <2>;
> > +};
> > +
> > +cpu7: cpu@700 {
> > +device_type = "cpu";
> > +compatible = "arm,cortex-a78";
> > +reg = <0x700>;
> > +enable-method = "psci";
> > +clock-frequency = <2600000000>;
> > +capacity-dmips-mhz = <1024>;
> > +cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> > +next-level-cache = <&l2_1>;
> > +#cooling-cells = <2>;
> > +};
> > +
> > +cpu-map {
> > +cluster0 {
> > +core0 {
> > +cpu = <&cpu0>;
> > +};
> > +
> > +core1 {
> > +cpu = <&cpu1>;
> > +};
> > +
> > +core2 {
> > +cpu = <&cpu2>;
> > +};
> > +
> > +core3 {
> > +cpu = <&cpu3>;
> > +};
> > +
> > +core4 {
> > +cpu = <&cpu4>;
> > +};
> > +
> > +core5 {
> > +cpu = <&cpu5>;
> > +};
> > +};
> > +
> > +cluster1 {
> 
> This is wrong. This SoC uses ARM DynamIQ and combines both the big
> and LITTLE
> CPUs in *one* single cluster.
> Please fix.
> 
> > +core0 {
> > +cpu = <&cpu6>;
> > +};
> > +
> > +core1 {
> > +cpu = <&cpu7>;
> > +};
> > +};
> > +};
> > +
> 
> ..snip..
> 
> 
> > +
> > +pwrap: pwrap@10024000 {
> > +compatible = "mediatek,mt8195-pwrap", "syscon";
> 
> Please:
> 
> compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap",
> "syscon";
> 
> > +reg = <0 0x10024000 0 0x1000>;
> > +reg-names = "pwrap";
> > +interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
> > +clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
> > + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
> > +clock-names = "spi", "wrap";
> > +};
> > +
> 
> ..snip..
> 
> > +uart0: serial@11001100 {
> > +compatible = "mediatek,mt8188-uart",
> > +     "mediatek,mt6577-uart";
> 
> Those compatible strings fit in one line. 85 columns is ok.
> 
> > +reg = <0 0x11001100 0 0x100>;
> > +interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
> > +clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
> > +clock-names = "baud", "bus";
> > +status = "disabled";
> > +};
> > +
> 
> ..snip..
> 
> > +
> > +auxadc: adc@11002000 {
> > +compatible = "mediatek,mt8188-auxadc",
> > +     "mediatek,mt8173-auxadc";
> 
> 89 columns is ok, fits in one line.
> 
> > +reg = <0 0x11002000 0 0x1000>;
> > +clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
> > +clock-names = "main";
> > +#io-channel-cells = <1>;
> > +status = "disabled";
> > +};
> > +
> > +pericfg_ao: syscon@11003000 {
> > +compatible = "mediatek,mt8188-pericfg-ao", "syscon";
> > +reg = <0 0x11003000 0 0x1000>;
> > +#clock-cells = <1>;
> > +};
> > +
> > +spi0: spi@1100a000 {
> > +compatible = "mediatek,mt8188-spi-ipm",
> > +     "mediatek,spi-ipm";
> 
> Fits in one line.
> 
> > +#address-cells = <1>;
> > +#size-cells = <0>;
> > +reg = <0 0x1100a000 0 0x1000>;
> > +interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
> > +clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
> > + <&topckgen CLK_TOP_SPI>,
> > + <&infracfg_ao CLK_INFRA_AO_SPI0>;
> > +clock-names = "parent-clk", "sel-clk", "spi-clk";
> > +status = "disabled";
> > +};
> > +
> 
> ..snip..
> 
> > +
> > +xhci1: usb@11200000 {
> > +compatible = "mediatek,mt8188-xhci",
> > +     "mediatek,mtk-xhci";
> 
> Fits in one line again.
> 
> > +reg = <0 0x11200000 0 0x1000>,
> > +      <0 0x11203e00 0 0x0100>;
> > +reg-names = "mac", "ippc";
> > +interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
> > +phys = <&u2port1 PHY_TYPE_USB2>,
> > +       <&u3port1 PHY_TYPE_USB3>;
> > +assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
> > +  <&topckgen CLK_TOP_SSUSB_XHCI>;
> > +assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
> > + <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> > +clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
> > + <&topckgen CLK_TOP_SSUSB_TOP_REF>,
> > + <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
> > +clock-names = "sys_ck", "ref_ck", "mcu_ck";
> > +mediatek,syscon-wakeup = <&pericfg 0x468 2>;
> > +wakeup-source;
> > +status = "disabled";
> > +};
> > +
> > +mmc0: mmc@11230000 {
> > +compatible = "mediatek,mt8188-mmc",
> > +     "mediatek,mt8183-mmc";
> 
> same here.
> 
> > +reg = <0 0x11230000 0 0x10000>,
> > +      <0 0x11f50000 0 0x1000>;
> > +interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
> > +clocks = <&topckgen CLK_TOP_MSDC50_0>,
> > + <&infracfg_ao CLK_INFRA_AO_MSDC0>,
> > + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
> > + <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
> > +clock-names = "source", "hclk", "source_cg", "crypto_clk";
> > +status = "disabled";
> > +};
> > +
> 
> ..snip..
> 
> > +
> > +xhci2: usb@112a0000 {
> > +compatible = "mediatek,mt8188-xhci",
> > +     "mediatek,mtk-xhci";
> 
> and here, and somewhere else as well.
> 
> Regards,
> Angelo
> 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index c99c3372a4b5..9bd2324259a3 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -44,6 +44,7 @@  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
new file mode 100644
index 000000000000..d3872196200a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
@@ -0,0 +1,402 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	model = "MediaTek MT8188 evaluation board";
+	compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial0:115200n8";
+		kaslr-seed = <0 0>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: scp_mem_region {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x1481b>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&pio {
+	adsp_uart_pins: adsp-uart-pins {
+		pins_adsp_uart {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins_bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins_bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins_bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins_bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins_bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins_bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins_bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-pins {
+		pins0 {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins1 {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
+				 <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
+				 <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
+			bias-pull-up;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins_spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins_spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins_spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins_uart0 {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pmic {
+	interrupt-parent = <&pio>;
+	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status="okay";
+};
+
+&u3phy1 {
+	status="okay";
+};
+
+&u3phy2 {
+	status="okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
new file mode 100644
index 000000000000..8f042ffe0938
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -0,0 +1,926 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mediatek,mt8188-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+
+/ {
+	compatible = "mediatek,mt8188";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <95>;
+				min-residency-us = <580>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <45>;
+				exit-latency-us = <140>;
+				min-residency-us = <740>;
+			};
+
+			cluster_off_l: cluster-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <155>;
+				min-residency-us = <840>;
+			};
+
+			cluster_off_b: cluster-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	clk13m: oscillator-13m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <13000000>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clock-frequency = <13000000>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8188-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8188-infracfg-ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8188-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8188-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11e10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_rm",
+				    "iocfg_lt", "iocfg_lm", "iocfg_rt",
+				    "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 176>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8188-wdt";
+			mediatek,disable-extrst;
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8188-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8188-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			reg-names = "sys_timer_base";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10024000 {
+			compatible = "mediatek,mt8195-pwrap", "syscon";
+			reg = <0 0x10024000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8188-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_audio26m: clock-controller@10b91100 {
+			compatible = "mediatek,mt8188-adsp-audio26m";
+			reg = <0 0x10b91100 0 0x100>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8188-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001100 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11001200 {
+			compatible = "mediatek,mt8188-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001200 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11001300 {
+			compatible = "mediatek,mt8188-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001300 0 0x100>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11001400 {
+			compatible = "mediatek,mt8188-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001400 0 0x100>;
+			interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		auxadc: adc@11002000 {
+			compatible = "mediatek,mt8188-auxadc",
+				     "mediatek,mt8173-auxadc";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pericfg_ao: syscon@11003000 {
+			compatible = "mediatek,mt8188-pericfg-ao", "syscon";
+			reg = <0 0x11003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8188-spi-ipm",
+				     "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8188-spi-ipm",
+				     "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8188-spi-ipm",
+				     "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8188-spi-ipm",
+				     "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8188-spi-ipm",
+				     "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8188-spi-ipm",
+				     "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		xhci1: usb@11200000 {
+			compatible = "mediatek,mt8188-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>,
+			       <&u3port1 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8188-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
+			clock-names = "source", "hclk", "source_cg", "crypto_clk";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8188-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11eb0000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11280000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11280000 0 0x1000>,
+			      <0 0x10220080 0 0x80>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11281000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11281000 0 0x1000>,
+			      <0 0x10220180 0 0x80>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11282000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11282000 0 0x1000>,
+			      <0 0x10220280 0 0x80>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_c: clock-controller@11283000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-c";
+			reg = <0 0x11283000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8188-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>,
+					  <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			status = "disabled";
+		};
+
+		xhci0: usb@112b0000 {
+			compatible = "mediatek,mt8188-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>,
+					  <&topckgen CLK_TOP_USB_TOP_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x460 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		nor_flash: spi@1132c000 {
+			compatible = "mediatek,mt8188-nor",
+				     "mediatek,mt8186-nor";
+			reg = <0 0x1132c000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11e00000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10220100 0 0x80>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11e01000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e01000 0 0x1000>,
+			      <0 0x10220380 0 0x80>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e02000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-w";
+			reg = <0 0x11e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy0: t-phy@11e30000 {
+			compatible = "mediatek,mt8188-tphy",
+				     "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e30000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11e40000 {
+			compatible = "mediatek,mt8188-tphy",
+				     "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e40000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		u3phy2: t-phy@11e80000 {
+			compatible = "mediatek,mt8188-tphy",
+				     "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e80000 0x1000>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		i2c5: i2c@11ec0000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec0000 0 0x1000>,
+			      <0 0x10220480 0 0x80>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11ec1000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec1000 0 0x1000>,
+			      <0 0x10220600 0 0x80>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_en: clock-controller@11ec2000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-en";
+			reg = <0 0x11ec2000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8188-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys0: clock-controller@14000000 {
+			compatible = "mediatek,mt8188-vppsys0";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys: clock-controller@14e00000 {
+			compatible = "mediatek,mt8188-wpesys";
+			reg = <0 0x14e00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp0: clock-controller@14e02000 {
+			compatible = "mediatek,mt8188-wpesys-vpp0";
+			reg = <0 0x14e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys1: clock-controller@14f00000 {
+			compatible = "mediatek,mt8188-vppsys1";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8188-imgsys";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_top: clock-controller@15110000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-top";
+			reg = <0 0x15110000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_nr: clock-controller@15130000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-nr";
+			reg = <0 0x15130000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe1: clock-controller@15220000 {
+			compatible = "mediatek,mt8188-imgsys-wpe1";
+			reg = <0 0x15220000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@15330000 {
+			compatible = "mediatek,mt8188-ipesys";
+			reg = <0 0x15330000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe2: clock-controller@15520000 {
+			compatible = "mediatek,mt8188-imgsys-wpe2";
+			reg = <0 0x15520000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe3: clock-controller@15620000 {
+			compatible = "mediatek,mt8188-imgsys-wpe3";
+			reg = <0 0x15620000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8188-camsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawa: clock-controller@1604f000 {
+			compatible = "mediatek,mt8188-camsys-rawa";
+			reg = <0 0x1604f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuva: clock-controller@1606f000 {
+			compatible = "mediatek,mt8188-camsys-yuva";
+			reg = <0 0x1606f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1608f000 {
+			compatible = "mediatek,mt8188-camsys-rawb";
+			reg = <0 0x1608f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuvb: clock-controller@160af000 {
+			compatible = "mediatek,mt8188-camsys-yuvb";
+			reg = <0 0x160af000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ccusys: clock-controller@17200000 {
+			compatible = "mediatek,mt8188-ccusys";
+			reg = <0 0x17200000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys_soc: clock-controller@1800f000 {
+			compatible = "mediatek,mt8188-vdecsys-soc";
+			reg = <0 0x1800f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: clock-controller@1802f000 {
+			compatible = "mediatek,mt8188-vdecsys";
+			reg = <0 0x1802f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8188-vencsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+	};
+};