| Message ID | 20230704135936.14697-6-ddrokosov@sberdevices.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | tty: serial: meson: support ttyS devname | expand |
On Tue, Jul 04, 2023 at 04:59:36PM +0300, Dmitry Rokosov wrote: > In the current implementation, the meson-a1 configuration incorporates a > unique compatibility tag "amlogic,meson-a1-uart' within the meson-uart > driver due to its usage of the new console device name "ttyS". > Consequently, the previous compatibility tag designated for the > 'amlogic,meson-gx-uart' configuration has become obsolete and is no > longer relevant to the current setup. I don't really see why you would remove the gx-uart to be honest, and not use it as a fallback. Neil's platform though, so his call :) > > Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> > --- > arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi > index c5567031ba12..6273b9c862b3 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi > @@ -344,7 +344,7 @@ mux { > }; > > uart_AO: serial@1c00 { > - compatible = "amlogic,meson-gx-uart", > + compatible = "amlogic,meson-a1-uart", > "amlogic,meson-ao-uart"; > reg = <0x0 0x1c00 0x0 0x18>; > interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; > @@ -354,7 +354,7 @@ uart_AO: serial@1c00 { > }; > > uart_AO_B: serial@2000 { > - compatible = "amlogic,meson-gx-uart", > + compatible = "amlogic,meson-a1-uart", > "amlogic,meson-ao-uart"; > reg = <0x0 0x2000 0x0 0x18>; > interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; > -- > 2.36.0 >
On Tue, Jul 04, 2023 at 06:02:58PM +0100, Conor Dooley wrote: > On Tue, Jul 04, 2023 at 04:59:36PM +0300, Dmitry Rokosov wrote: > > In the current implementation, the meson-a1 configuration incorporates a > > unique compatibility tag "amlogic,meson-a1-uart' within the meson-uart > > driver due to its usage of the new console device name "ttyS". > > Consequently, the previous compatibility tag designated for the > > 'amlogic,meson-gx-uart' configuration has become obsolete and is no > > longer relevant to the current setup. > > I don't really see why you would remove the gx-uart to be honest, and > not use it as a fallback. Neil's platform though, so his call :) > Because of amlogic,meson-gx-uart has legacy devname, we do not want to use it in the A1. > > > > Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> > > --- > > arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi > > index c5567031ba12..6273b9c862b3 100644 > > --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi > > +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi > > @@ -344,7 +344,7 @@ mux { > > }; > > > > uart_AO: serial@1c00 { > > - compatible = "amlogic,meson-gx-uart", > > + compatible = "amlogic,meson-a1-uart", > > "amlogic,meson-ao-uart"; > > reg = <0x0 0x1c00 0x0 0x18>; > > interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; > > @@ -354,7 +354,7 @@ uart_AO: serial@1c00 { > > }; > > > > uart_AO_B: serial@2000 { > > - compatible = "amlogic,meson-gx-uart", > > + compatible = "amlogic,meson-a1-uart", > > "amlogic,meson-ao-uart"; > > reg = <0x0 0x2000 0x0 0x18>; > > interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; > > -- > > 2.36.0 > >
On Tue, Jul 04, 2023 at 08:08:43PM +0300, Dmitry Rokosov wrote: > On Tue, Jul 04, 2023 at 06:02:58PM +0100, Conor Dooley wrote: > > On Tue, Jul 04, 2023 at 04:59:36PM +0300, Dmitry Rokosov wrote: > > > In the current implementation, the meson-a1 configuration incorporates a > > > unique compatibility tag "amlogic,meson-a1-uart' within the meson-uart > > > driver due to its usage of the new console device name "ttyS". > > > Consequently, the previous compatibility tag designated for the > > > 'amlogic,meson-gx-uart' configuration has become obsolete and is no > > > longer relevant to the current setup. > > > > I don't really see why you would remove the gx-uart to be honest, and > > not use it as a fallback. Neil's platform though, so his call :) > > > > Because of amlogic,meson-gx-uart has legacy devname, we do not want to > use it in the A1. Which I did read in your commit message, fallback being the operative word here.
On Tue, Jul 04, 2023 at 06:10:46PM +0100, Conor Dooley wrote: > On Tue, Jul 04, 2023 at 08:08:43PM +0300, Dmitry Rokosov wrote: > > On Tue, Jul 04, 2023 at 06:02:58PM +0100, Conor Dooley wrote: > > > On Tue, Jul 04, 2023 at 04:59:36PM +0300, Dmitry Rokosov wrote: > > > > In the current implementation, the meson-a1 configuration incorporates a > > > > unique compatibility tag "amlogic,meson-a1-uart' within the meson-uart > > > > driver due to its usage of the new console device name "ttyS". > > > > Consequently, the previous compatibility tag designated for the > > > > 'amlogic,meson-gx-uart' configuration has become obsolete and is no > > > > longer relevant to the current setup. > > > > > > I don't really see why you would remove the gx-uart to be honest, and > > > not use it as a fallback. Neil's platform though, so his call :) > > > > > > > Because of amlogic,meson-gx-uart has legacy devname, we do not want to > > use it in the A1. > > Which I did read in your commit message, fallback being the operative > word here. Although it is difficult for me to envision a situation where we would require this fallback, but gx-uart fallback will function from a kernel perspective (without taking into account bootloader setup or userspace daemon script). I don't have any objections to stay gx-uart as a fallback, will do it in the v2.
Conor, On Tue, Jul 04, 2023 at 08:19:00PM +0300, Dmitry Rokosov wrote: > On Tue, Jul 04, 2023 at 06:10:46PM +0100, Conor Dooley wrote: > > On Tue, Jul 04, 2023 at 08:08:43PM +0300, Dmitry Rokosov wrote: > > > On Tue, Jul 04, 2023 at 06:02:58PM +0100, Conor Dooley wrote: > > > > On Tue, Jul 04, 2023 at 04:59:36PM +0300, Dmitry Rokosov wrote: > > > > > In the current implementation, the meson-a1 configuration incorporates a > > > > > unique compatibility tag "amlogic,meson-a1-uart' within the meson-uart > > > > > driver due to its usage of the new console device name "ttyS". > > > > > Consequently, the previous compatibility tag designated for the > > > > > 'amlogic,meson-gx-uart' configuration has become obsolete and is no > > > > > longer relevant to the current setup. > > > > > > > > I don't really see why you would remove the gx-uart to be honest, and > > > > not use it as a fallback. Neil's platform though, so his call :) > > > > > > > > > > Because of amlogic,meson-gx-uart has legacy devname, we do not want to > > > use it in the A1. > > > > Which I did read in your commit message, fallback being the operative > > word here. > > Although it is difficult for me to envision a situation where we would > require this fallback, but gx-uart fallback will function from a kernel > perspective (without taking into account bootloader setup or userspace > daemon script). I don't have any objections to stay gx-uart as a > fallback, will do it in the v2. Unfortunately, it's not possible based on schema rules. During dtbs check I've got the such error: arch/arm64/boot/dts/amlogic/meson-a1-ad401.dtb: serial@1c00: compatible: 'oneOf' conditional failed, one must be fixed: ['amlogic,meson-a1-uart', 'amlogic,meson-ao-uart', 'amlogic,meson-gx-uart'] is too long 'amlogic,meson-g12a-uart' was expected 'amlogic,meson-gx-uart' was expected 'amlogic,meson-ao-uart' was expected From schema: Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml Of course, we can change dt bindings schema, but is it really needed? As I said before, it's difficult to imagine the situation, when gx-uart fallback will be helpful.
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index c5567031ba12..6273b9c862b3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -344,7 +344,7 @@ mux { }; uart_AO: serial@1c00 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-a1-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x1c00 0x0 0x18>; interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; @@ -354,7 +354,7 @@ uart_AO: serial@1c00 { }; uart_AO_B: serial@2000 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-a1-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x2000 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
In the current implementation, the meson-a1 configuration incorporates a unique compatibility tag "amlogic,meson-a1-uart' within the meson-uart driver due to its usage of the new console device name "ttyS". Consequently, the previous compatibility tag designated for the 'amlogic,meson-gx-uart' configuration has become obsolete and is no longer relevant to the current setup. Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> --- arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)