| Message ID | 20230705181833.16137-4-ddrokosov@sberdevices.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | tty: serial: meson: support ttyS devname | expand |
Hi, On 05/07/2023 20:18, Dmitry Rokosov wrote: > It is worth noting that the devname ttyS is a widely recognized tty name > and is commonly used by many uart device drivers. Given the established > usage and compatibility concerns, it may not be feasible to change the > devname for older SoCs. However, for new definitions, it is acceptable > and even recommended to use a new devname to help ensure clarity and > avoid any potential conflicts on lower or upper software levels. > > For more information please refer to IRC discussion at [1]. > > Links: > [1]: https://libera.irclog.whitequark.org/linux-amlogic/2023-07-03 > > Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> > --- > drivers/tty/serial/meson_uart.c | 82 ++++++++++++++++++++++----------- > 1 file changed, 56 insertions(+), 26 deletions(-) > > diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c > index dcf994a11a21..ad0748a10db7 100644 > --- a/drivers/tty/serial/meson_uart.c > +++ b/drivers/tty/serial/meson_uart.c > @@ -72,16 +72,22 @@ > > #define AML_UART_PORT_NUM 12 > #define AML_UART_PORT_OFFSET 6 > -#define AML_UART_DEV_NAME "ttyAML" > > #define AML_UART_POLL_USEC 5 > #define AML_UART_TIMEOUT_USEC 10000 > > -static struct uart_driver meson_uart_driver; > +#define MESON_UART_DRIVER(_devname) meson_uart_driver_##_devname > + > +#define MESON_UART_DRIVER_DECLARE(_devname) \ > + static struct uart_driver MESON_UART_DRIVER(_devname) > + > +MESON_UART_DRIVER_DECLARE(ttyAML); > +MESON_UART_DRIVER_DECLARE(ttyS); Not sure those macros are useful: MESON_UART_DRIVER_DECLARE(ttyAML) vs static struct uart_driver meson_uart_driver_ttyAML I prefer the second... > > static struct uart_port *meson_ports[AML_UART_PORT_NUM]; > > struct meson_uart_data { > + struct uart_driver *uart_driver; > bool has_xtal_div2; > }; > > @@ -611,15 +617,21 @@ static int meson_serial_console_setup(struct console *co, char *options) > return uart_set_options(port, co, baud, parity, bits, flow); > } I think the uart_driver meson_uart_driver_ttyXXX should be declared here instead or.. > > -static struct console meson_serial_console = { > - .name = AML_UART_DEV_NAME, > - .write = meson_serial_console_write, > - .device = uart_console_device, > - .setup = meson_serial_console_setup, > - .flags = CON_PRINTBUFFER, > - .index = -1, > - .data = &meson_uart_driver, > -}; > +#define MESON_SERIAL_CONSOLE(_devname) meson_serial_console_##_devname > + > +#define MESON_SERIAL_CONSOLE_DEFINE(_devname) \ > + static struct console MESON_SERIAL_CONSOLE(_devname) = { \ > + .name = __stringify(_devname), \ > + .write = meson_serial_console_write, \ > + .device = uart_console_device, \ > + .setup = meson_serial_console_setup, \ > + .flags = CON_PRINTBUFFER, \ > + .index = -1, \ > + .data = &MESON_UART_DRIVER(_devname), \ > + } ... you could even declare the meson_uart_driver_ttyXXX in this macro instead. > + > +MESON_SERIAL_CONSOLE_DEFINE(ttyAML); > +MESON_SERIAL_CONSOLE_DEFINE(ttyS); > > static void meson_serial_early_console_write(struct console *co, > const char *s, > @@ -644,18 +656,22 @@ meson_serial_early_console_setup(struct earlycon_device *device, const char *opt > OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart", > meson_serial_early_console_setup); > > -#define MESON_SERIAL_CONSOLE (&meson_serial_console) > +#define MESON_SERIAL_CONSOLE_PTR(_devname) (&MESON_SERIAL_CONSOLE(_devname)) > #else > -#define MESON_SERIAL_CONSOLE NULL > +#define MESON_SERIAL_CONSOLE_PTR(_devname) (NULL) > #endif > > -static struct uart_driver meson_uart_driver = { > - .owner = THIS_MODULE, > - .driver_name = "meson_uart", > - .dev_name = AML_UART_DEV_NAME, > - .nr = AML_UART_PORT_NUM, > - .cons = MESON_SERIAL_CONSOLE, > -}; > +#define MESON_UART_DRIVER_DEFINE(_devname) \ > + static struct uart_driver MESON_UART_DRIVER(_devname) = { \ > + .owner = THIS_MODULE, \ > + .driver_name = "meson_uart", \ > + .dev_name = __stringify(_devname), \ > + .nr = AML_UART_PORT_NUM, \ > + .cons = MESON_SERIAL_CONSOLE_PTR(_devname), \ > + } > + > +MESON_UART_DRIVER_DEFINE(ttyAML); > +MESON_UART_DRIVER_DEFINE(ttyS); Those macros are fine, but drop the MESON_UART_DRIVER & MESON_SERIAL_CONSOLE macros and drop the _DEFINE in those macros. > > static int meson_uart_probe_clocks(struct platform_device *pdev, > struct uart_port *port) > @@ -681,8 +697,16 @@ static int meson_uart_probe_clocks(struct platform_device *pdev, > return 0; > } > > +static struct uart_driver *meson_uart_current(const struct meson_uart_data *pd) > +{ > + return (pd && pd->uart_driver) ? > + pd->uart_driver : &MESON_UART_DRIVER(ttyAML); I'll definitely prefer if you use the real variable name everywhere and in the 2 following patches > +} > + > static int meson_uart_probe(struct platform_device *pdev) > { > + const struct meson_uart_data *priv_data; > + struct uart_driver *uart_driver; > struct resource *res_mem; > struct uart_port *port; > u32 fifosize = 64; /* Default is 64, 128 for EE UART_0 */ > @@ -729,8 +753,12 @@ static int meson_uart_probe(struct platform_device *pdev) > if (ret) > return ret; > > - if (!meson_uart_driver.state) { > - ret = uart_register_driver(&meson_uart_driver); > + priv_data = device_get_match_data(&pdev->dev); > + > + uart_driver = meson_uart_current(priv_data); > + > + if (!uart_driver->state) { > + ret = uart_register_driver(uart_driver); > if (ret) > return dev_err_probe(&pdev->dev, ret, > "can't register uart driver\n"); > @@ -748,7 +776,7 @@ static int meson_uart_probe(struct platform_device *pdev) > port->x_char = 0; > port->ops = &meson_uart_ops; > port->fifosize = fifosize; > - port->private_data = (void *)device_get_match_data(&pdev->dev); > + port->private_data = (void *)priv_data; > > meson_ports[pdev->id] = port; > platform_set_drvdata(pdev, port); > @@ -759,7 +787,7 @@ static int meson_uart_probe(struct platform_device *pdev) > meson_uart_release_port(port); > } > > - ret = uart_add_one_port(&meson_uart_driver, port); > + ret = uart_add_one_port(uart_driver, port); > if (ret) > meson_ports[pdev->id] = NULL; > > @@ -768,10 +796,12 @@ static int meson_uart_probe(struct platform_device *pdev) > > static int meson_uart_remove(struct platform_device *pdev) > { > + struct uart_driver *uart_driver; > struct uart_port *port; > > port = platform_get_drvdata(pdev); > - uart_remove_one_port(&meson_uart_driver, port); > + uart_driver = meson_uart_current(port->private_data); > + uart_remove_one_port(uart_driver, port); > meson_ports[pdev->id] = NULL; > > for (int id = 0; id < AML_UART_PORT_NUM; id++) > @@ -779,7 +809,7 @@ static int meson_uart_remove(struct platform_device *pdev) > return 0; > > /* No more available uart ports, unregister uart driver */ > - uart_unregister_driver(&meson_uart_driver); > + uart_unregister_driver(uart_driver); > > return 0; > } Anyway this looks much better :-) Thanks, Neil
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index dcf994a11a21..ad0748a10db7 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -72,16 +72,22 @@ #define AML_UART_PORT_NUM 12 #define AML_UART_PORT_OFFSET 6 -#define AML_UART_DEV_NAME "ttyAML" #define AML_UART_POLL_USEC 5 #define AML_UART_TIMEOUT_USEC 10000 -static struct uart_driver meson_uart_driver; +#define MESON_UART_DRIVER(_devname) meson_uart_driver_##_devname + +#define MESON_UART_DRIVER_DECLARE(_devname) \ + static struct uart_driver MESON_UART_DRIVER(_devname) + +MESON_UART_DRIVER_DECLARE(ttyAML); +MESON_UART_DRIVER_DECLARE(ttyS); static struct uart_port *meson_ports[AML_UART_PORT_NUM]; struct meson_uart_data { + struct uart_driver *uart_driver; bool has_xtal_div2; }; @@ -611,15 +617,21 @@ static int meson_serial_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -static struct console meson_serial_console = { - .name = AML_UART_DEV_NAME, - .write = meson_serial_console_write, - .device = uart_console_device, - .setup = meson_serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &meson_uart_driver, -}; +#define MESON_SERIAL_CONSOLE(_devname) meson_serial_console_##_devname + +#define MESON_SERIAL_CONSOLE_DEFINE(_devname) \ + static struct console MESON_SERIAL_CONSOLE(_devname) = { \ + .name = __stringify(_devname), \ + .write = meson_serial_console_write, \ + .device = uart_console_device, \ + .setup = meson_serial_console_setup, \ + .flags = CON_PRINTBUFFER, \ + .index = -1, \ + .data = &MESON_UART_DRIVER(_devname), \ + } + +MESON_SERIAL_CONSOLE_DEFINE(ttyAML); +MESON_SERIAL_CONSOLE_DEFINE(ttyS); static void meson_serial_early_console_write(struct console *co, const char *s, @@ -644,18 +656,22 @@ meson_serial_early_console_setup(struct earlycon_device *device, const char *opt OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart", meson_serial_early_console_setup); -#define MESON_SERIAL_CONSOLE (&meson_serial_console) +#define MESON_SERIAL_CONSOLE_PTR(_devname) (&MESON_SERIAL_CONSOLE(_devname)) #else -#define MESON_SERIAL_CONSOLE NULL +#define MESON_SERIAL_CONSOLE_PTR(_devname) (NULL) #endif -static struct uart_driver meson_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "meson_uart", - .dev_name = AML_UART_DEV_NAME, - .nr = AML_UART_PORT_NUM, - .cons = MESON_SERIAL_CONSOLE, -}; +#define MESON_UART_DRIVER_DEFINE(_devname) \ + static struct uart_driver MESON_UART_DRIVER(_devname) = { \ + .owner = THIS_MODULE, \ + .driver_name = "meson_uart", \ + .dev_name = __stringify(_devname), \ + .nr = AML_UART_PORT_NUM, \ + .cons = MESON_SERIAL_CONSOLE_PTR(_devname), \ + } + +MESON_UART_DRIVER_DEFINE(ttyAML); +MESON_UART_DRIVER_DEFINE(ttyS); static int meson_uart_probe_clocks(struct platform_device *pdev, struct uart_port *port) @@ -681,8 +697,16 @@ static int meson_uart_probe_clocks(struct platform_device *pdev, return 0; } +static struct uart_driver *meson_uart_current(const struct meson_uart_data *pd) +{ + return (pd && pd->uart_driver) ? + pd->uart_driver : &MESON_UART_DRIVER(ttyAML); +} + static int meson_uart_probe(struct platform_device *pdev) { + const struct meson_uart_data *priv_data; + struct uart_driver *uart_driver; struct resource *res_mem; struct uart_port *port; u32 fifosize = 64; /* Default is 64, 128 for EE UART_0 */ @@ -729,8 +753,12 @@ static int meson_uart_probe(struct platform_device *pdev) if (ret) return ret; - if (!meson_uart_driver.state) { - ret = uart_register_driver(&meson_uart_driver); + priv_data = device_get_match_data(&pdev->dev); + + uart_driver = meson_uart_current(priv_data); + + if (!uart_driver->state) { + ret = uart_register_driver(uart_driver); if (ret) return dev_err_probe(&pdev->dev, ret, "can't register uart driver\n"); @@ -748,7 +776,7 @@ static int meson_uart_probe(struct platform_device *pdev) port->x_char = 0; port->ops = &meson_uart_ops; port->fifosize = fifosize; - port->private_data = (void *)device_get_match_data(&pdev->dev); + port->private_data = (void *)priv_data; meson_ports[pdev->id] = port; platform_set_drvdata(pdev, port); @@ -759,7 +787,7 @@ static int meson_uart_probe(struct platform_device *pdev) meson_uart_release_port(port); } - ret = uart_add_one_port(&meson_uart_driver, port); + ret = uart_add_one_port(uart_driver, port); if (ret) meson_ports[pdev->id] = NULL; @@ -768,10 +796,12 @@ static int meson_uart_probe(struct platform_device *pdev) static int meson_uart_remove(struct platform_device *pdev) { + struct uart_driver *uart_driver; struct uart_port *port; port = platform_get_drvdata(pdev); - uart_remove_one_port(&meson_uart_driver, port); + uart_driver = meson_uart_current(port->private_data); + uart_remove_one_port(uart_driver, port); meson_ports[pdev->id] = NULL; for (int id = 0; id < AML_UART_PORT_NUM; id++) @@ -779,7 +809,7 @@ static int meson_uart_remove(struct platform_device *pdev) return 0; /* No more available uart ports, unregister uart driver */ - uart_unregister_driver(&meson_uart_driver); + uart_unregister_driver(uart_driver); return 0; }
It is worth noting that the devname ttyS is a widely recognized tty name and is commonly used by many uart device drivers. Given the established usage and compatibility concerns, it may not be feasible to change the devname for older SoCs. However, for new definitions, it is acceptable and even recommended to use a new devname to help ensure clarity and avoid any potential conflicts on lower or upper software levels. For more information please refer to IRC discussion at [1]. Links: [1]: https://libera.irclog.whitequark.org/linux-amlogic/2023-07-03 Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> --- drivers/tty/serial/meson_uart.c | 82 ++++++++++++++++++++++----------- 1 file changed, 56 insertions(+), 26 deletions(-)