diff mbox series

[net] net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()

Message ID 20230712110657.1282499-1-s-vadapalli@ti.com (mailing list archive)
State New, archived
Headers show
Series [net] net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field() | expand

Commit Message

Siddharth Vadapalli July 12, 2023, 11:06 a.m. UTC
From: Tanmay Patil <t-patil@ti.com>

CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.

Fix the methods to handle getting/setting fields spanning up to two words.

Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support")
Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag]
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 drivers/net/ethernet/ti/cpsw_ale.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

Comments

Roger Quadros July 12, 2023, 1:50 p.m. UTC | #1
On 12/07/2023 14:06, Siddharth Vadapalli wrote:
> From: Tanmay Patil <t-patil@ti.com>
> 
> CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
> The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
> field will be strictly contained within one word. However, this is not
> guaranteed to be the case and it is possible for ALE field entries to span
> across up to two words at the most.
> 
> Fix the methods to handle getting/setting fields spanning up to two words.
> 
> Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support")
> Signed-off-by: Tanmay Patil <t-patil@ti.com>
> [s-vadapalli@ti.com: rephrased commit message and added Fixes tag]
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
>  drivers/net/ethernet/ti/cpsw_ale.c | 24 +++++++++++++++++++-----
>  1 file changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
> index 0c5e783e574c..64bf22cd860c 100644
> --- a/drivers/net/ethernet/ti/cpsw_ale.c
> +++ b/drivers/net/ethernet/ti/cpsw_ale.c
> @@ -106,23 +106,37 @@ struct cpsw_ale_dev_id {
>  
>  static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits)
>  {
> -	int idx;
> +	int idx, idx2;
> +	u32 hi_val = 0;
>  
>  	idx    = start / 32;
> +	idx2 = (start + bits - 1) / 32;
> +	/* Check if bits to be fetched exceed a word */
> +	if (idx != idx2) {
> +		idx2 = 2 - idx2; /* flip */
> +		hi_val = ale_entry[idx2] << ((idx2 * 32) - start);
> +	}
>  	start -= idx * 32;
>  	idx    = 2 - idx; /* flip */
> -	return (ale_entry[idx] >> start) & BITMASK(bits);
> +	return (hi_val + (ale_entry[idx] >> start)) & BITMASK(bits);

Should this be bit-wise OR instead of ADD?

>  }
>  
>  static inline void cpsw_ale_set_field(u32 *ale_entry, u32 start, u32 bits,
>  				      u32 value)
>  {
> -	int idx;
> +	int idx, idx2;
>  
>  	value &= BITMASK(bits);
> -	idx    = start / 32;
> +	idx = start / 32;
> +	idx2 = (start + bits - 1) / 32;
> +	/* Check if bits to be set exceed a word */
> +	if (idx != idx2) {
> +		idx2 = 2 - idx2; /* flip */
> +		ale_entry[idx2] &= ~(BITMASK(bits + start - (idx2 * 32)));
> +		ale_entry[idx2] |= (value >> ((idx2 * 32) - start));
> +	}
>  	start -= idx * 32;
> -	idx    = 2 - idx; /* flip */
> +	idx = 2 - idx; /* flip */
>  	ale_entry[idx] &= ~(BITMASK(bits) << start);
>  	ale_entry[idx] |=  (value << start);
>  }
Patil, Tanmay July 13, 2023, 6:30 a.m. UTC | #2
On 7/12/2023 7:20 PM, Roger Quadros wrote:
> 
> 
> On 12/07/2023 14:06, Siddharth Vadapalli wrote:
>> From: Tanmay Patil <t-patil@ti.com>
>>
>> CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
>> The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
>> field will be strictly contained within one word. However, this is not
>> guaranteed to be the case and it is possible for ALE field entries to span
>> across up to two words at the most.
>>
>> Fix the methods to handle getting/setting fields spanning up to two words.
>>
>> Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support")
>> Signed-off-by: Tanmay Patil <t-patil@ti.com>
>> [s-vadapalli@ti.com: rephrased commit message and added Fixes tag]
>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
>> ---
>>   drivers/net/ethernet/ti/cpsw_ale.c | 24 +++++++++++++++++++-----
>>   1 file changed, 19 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
>> index 0c5e783e574c..64bf22cd860c 100644
>> --- a/drivers/net/ethernet/ti/cpsw_ale.c
>> +++ b/drivers/net/ethernet/ti/cpsw_ale.c
>> @@ -106,23 +106,37 @@ struct cpsw_ale_dev_id {
>>   
>>   static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits)
>>   {
>> -	int idx;
>> +	int idx, idx2;
>> +	u32 hi_val = 0;
>>   
>>   	idx    = start / 32;
>> +	idx2 = (start + bits - 1) / 32;
>> +	/* Check if bits to be fetched exceed a word */
>> +	if (idx != idx2) {
>> +		idx2 = 2 - idx2; /* flip */
>> +		hi_val = ale_entry[idx2] << ((idx2 * 32) - start);
>> +	}
>>   	start -= idx * 32;
>>   	idx    = 2 - idx; /* flip */
>> -	return (ale_entry[idx] >> start) & BITMASK(bits);
>> +	return (hi_val + (ale_entry[idx] >> start)) & BITMASK(bits);
> 
> Should this be bit-wise OR instead of ADD?
> 

As the hi_val has been declared and left shifted in this function, we 
are sure that the trailing bits are all '0'. Hence we can directly add them.

>>   }
>>   
>>   static inline void cpsw_ale_set_field(u32 *ale_entry, u32 start, u32 bits,
>>   				      u32 value)
>>   {
>> -	int idx;
>> +	int idx, idx2;
>>   
>>   	value &= BITMASK(bits);
>> -	idx    = start / 32;
>> +	idx = start / 32;
>> +	idx2 = (start + bits - 1) / 32;
>> +	/* Check if bits to be set exceed a word */
>> +	if (idx != idx2) {
>> +		idx2 = 2 - idx2; /* flip */
>> +		ale_entry[idx2] &= ~(BITMASK(bits + start - (idx2 * 32)));
>> +		ale_entry[idx2] |= (value >> ((idx2 * 32) - start));
>> +	}
>>   	start -= idx * 32;
>> -	idx    = 2 - idx; /* flip */
>> +	idx = 2 - idx; /* flip */
>>   	ale_entry[idx] &= ~(BITMASK(bits) << start);
>>   	ale_entry[idx] |=  (value << start);
>>   }
>
patchwork-bot+netdevbpf@kernel.org July 14, 2023, 7:40 a.m. UTC | #3
Hello:

This patch was applied to netdev/net.git (main)
by David S. Miller <davem@davemloft.net>:

On Wed, 12 Jul 2023 16:36:57 +0530 you wrote:
> From: Tanmay Patil <t-patil@ti.com>
> 
> CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
> The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
> field will be strictly contained within one word. However, this is not
> guaranteed to be the case and it is possible for ALE field entries to span
> across up to two words at the most.
> 
> [...]

Here is the summary with links:
  - [net] net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()
    https://git.kernel.org/netdev/net/c/b685f1a58956

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 0c5e783e574c..64bf22cd860c 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -106,23 +106,37 @@  struct cpsw_ale_dev_id {
 
 static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits)
 {
-	int idx;
+	int idx, idx2;
+	u32 hi_val = 0;
 
 	idx    = start / 32;
+	idx2 = (start + bits - 1) / 32;
+	/* Check if bits to be fetched exceed a word */
+	if (idx != idx2) {
+		idx2 = 2 - idx2; /* flip */
+		hi_val = ale_entry[idx2] << ((idx2 * 32) - start);
+	}
 	start -= idx * 32;
 	idx    = 2 - idx; /* flip */
-	return (ale_entry[idx] >> start) & BITMASK(bits);
+	return (hi_val + (ale_entry[idx] >> start)) & BITMASK(bits);
 }
 
 static inline void cpsw_ale_set_field(u32 *ale_entry, u32 start, u32 bits,
 				      u32 value)
 {
-	int idx;
+	int idx, idx2;
 
 	value &= BITMASK(bits);
-	idx    = start / 32;
+	idx = start / 32;
+	idx2 = (start + bits - 1) / 32;
+	/* Check if bits to be set exceed a word */
+	if (idx != idx2) {
+		idx2 = 2 - idx2; /* flip */
+		ale_entry[idx2] &= ~(BITMASK(bits + start - (idx2 * 32)));
+		ale_entry[idx2] |= (value >> ((idx2 * 32) - start));
+	}
 	start -= idx * 32;
-	idx    = 2 - idx; /* flip */
+	idx = 2 - idx; /* flip */
 	ale_entry[idx] &= ~(BITMASK(bits) << start);
 	ale_entry[idx] |=  (value << start);
 }