diff mbox series

[RFC,XEN] x86/mwait-idle: Use ACPI for CPUs without hardcoded C-state table

Message ID aef138a50aaa769fceb2002dd56de437f1b8c456.1689674757.git.simon@invisiblethingslab.com (mailing list archive)
State New, archived
Headers show
Series [RFC,XEN] x86/mwait-idle: Use ACPI for CPUs without hardcoded C-state table | expand

Commit Message

Simon Gaiser July 18, 2023, 11:04 a.m. UTC
mwait-idle includes a hardcoded config for many CPUs. But some are
missing, for example Tiger Lake. Linux' driver reads the config from
ACPI in those cases. This adds this to Xen's implementation.

The Linux driver also has a feature to combine the internal table with
the infos from ACPI. This is not implemented here, for CPUs with
internal config nothing is changed.

Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
---

Sending this as RFC to get feedback on implementing it this way. I tried
to keep this change small and to avoid changing the existing code path
for CPUs with a config included in the driver. On the other hand this
makes it look a bit hacky.

I'm not quite sure if initializing mwait-idle in set_cx_pminfo this way
is correct. For example set_cx has some smp_wmb call I'm not sure when
it's needed, so might be very well missing something.

What also surprised me is that the existing code in mwait-idle first
calls cpuidle_current_governor->enable(processor_powers[cpu]) and later
setup the C-state config in processor_powers[cpu]. This seems the be the
wrong order (but, I think, current not important since
menu_enable_device doesn't use that part of the struct).

When I brought up the topic of this patch the first time Jan had an
interesting questions [1]:

> It hasn't become clear to me why Linux now has two CPU idle drivers
> consuming ACPI data (intel_idle and the purely ACPI-based one).

I'm not quite sure either. Linux' intel_idle.c states:

    intel_idle is a cpuidle driver that loads on all Intel CPUs with
    MWAIT in lieu of the legacy ACPI processor_idle driver.  The intent
    is to make Linux more efficient on these processors, as intel_idle
    knows more than ACPI, as well as make Linux more immune to ACPI BIOS
    bugs.

The commit that first added ACPI support to the Linux driver [2] says:

    The main functional difference between intel_idle with this change
    and the ACPI processor driver is that the former sets the target
    residency to be equal to the exit latency (provided by _CST) for
    C1-type C-states and to 3 times the exit latency value for the other
    C-state types, whereas the latter obtains the target residency by
    multiplying the exit latency by the same number (2 by default) for
    all C-state types.  Therefore it is expected that in general using
    the former instead of the latter on the same system will lead to
    improved energy-efficiency.

This sounds less impressive and doesn't explain why not to just change
the standard ACPI driver to use the better latency settings. On the
Linux what might play also a role is that the mwait driver also gained
the option to combine the internal settings with what it reads from
ACPI. That would be probably harder to include in the generic ACPI
driver.

This also raises the option to change the latency setting in Xen's
generic ACPI driver for the affected CPUs instead of touching
mwait-idle.

Currently I'm interested in this driver mainly for S0ix support. I did
nearly all my testing while using the mwait-idle driver to keep
differences to Linux as small as possible. (At first by hacking in some
config for the Tiger Lake CPU of my test system. Now with this patch.).
At some point I observed worse S0ix residency with Xen's generic ACPI
idle driver than with mwait-idle. But when I tried to reproduce this for
writing this e-mail I wasn't able to reproduce this measurement and got
the same residency for both idle drivers. So either I did messed up my
previous measurements or I have some unaccounted changes in my test
setup.

[1]: https://lore.kernel.org/xen-devel/f6c27788-bdd9-e5b1-a874-7f48a27c66a9@suse.com
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18734958e9bfbc055805d110a38dc76307eba742

 xen/arch/x86/acpi/cpu_idle.c       |  58 +++++++++++-----
 xen/arch/x86/cpu/mwait-idle.c      | 108 ++++++++++++++++++++++++-----
 xen/arch/x86/include/asm/cpuidle.h |   2 +-
 3 files changed, 134 insertions(+), 34 deletions(-)

Comments

Jan Beulich July 18, 2023, 3:21 p.m. UTC | #1
On 18.07.2023 13:04, Simon Gaiser wrote:
> mwait-idle includes a hardcoded config for many CPUs. But some are
> missing, for example Tiger Lake. Linux' driver reads the config from
> ACPI in those cases. This adds this to Xen's implementation.
> 
> The Linux driver also has a feature to combine the internal table with
> the infos from ACPI. This is not implemented here, for CPUs with
> internal config nothing is changed.
> 
> Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
> ---
> 
> Sending this as RFC to get feedback on implementing it this way. I tried
> to keep this change small and to avoid changing the existing code path
> for CPUs with a config included in the driver. On the other hand this
> makes it look a bit hacky.
> 
> I'm not quite sure if initializing mwait-idle in set_cx_pminfo this way
> is correct. For example set_cx has some smp_wmb call I'm not sure when
> it's needed, so might be very well missing something.
> 
> What also surprised me is that the existing code in mwait-idle first
> calls cpuidle_current_governor->enable(processor_powers[cpu]) and later
> setup the C-state config in processor_powers[cpu]. This seems the be the
> wrong order (but, I think, current not important since
> menu_enable_device doesn't use that part of the struct).
> 
> When I brought up the topic of this patch the first time Jan had an
> interesting questions [1]:
> 
>> It hasn't become clear to me why Linux now has two CPU idle drivers
>> consuming ACPI data (intel_idle and the purely ACPI-based one).
> 
> I'm not quite sure either. Linux' intel_idle.c states:
> 
>     intel_idle is a cpuidle driver that loads on all Intel CPUs with
>     MWAIT in lieu of the legacy ACPI processor_idle driver.  The intent
>     is to make Linux more efficient on these processors, as intel_idle
>     knows more than ACPI, as well as make Linux more immune to ACPI BIOS
>     bugs.
> 
> The commit that first added ACPI support to the Linux driver [2] says:
> 
>     The main functional difference between intel_idle with this change
>     and the ACPI processor driver is that the former sets the target
>     residency to be equal to the exit latency (provided by _CST) for
>     C1-type C-states and to 3 times the exit latency value for the other
>     C-state types, whereas the latter obtains the target residency by
>     multiplying the exit latency by the same number (2 by default) for
>     all C-state types.  Therefore it is expected that in general using
>     the former instead of the latter on the same system will lead to
>     improved energy-efficiency.
> 
> This sounds less impressive and doesn't explain why not to just change
> the standard ACPI driver to use the better latency settings. On the
> Linux what might play also a role is that the mwait driver also gained
> the option to combine the internal settings with what it reads from
> ACPI. That would be probably harder to include in the generic ACPI
> driver.
> 
> This also raises the option to change the latency setting in Xen's
> generic ACPI driver for the affected CPUs instead of touching
> mwait-idle.
> 
> Currently I'm interested in this driver mainly for S0ix support. I did
> nearly all my testing while using the mwait-idle driver to keep
> differences to Linux as small as possible. (At first by hacking in some
> config for the Tiger Lake CPU of my test system. Now with this patch.).
> At some point I observed worse S0ix residency with Xen's generic ACPI
> idle driver than with mwait-idle. But when I tried to reproduce this for
> writing this e-mail I wasn't able to reproduce this measurement and got
> the same residency for both idle drivers. So either I did messed up my
> previous measurements or I have some unaccounted changes in my test
> setup.

Taking all together perhaps more of an argument to see about making
the ACPI driver better. If with the same ACPI data the mwait-idle
one can (maybe) achieve better results, surely there's a way for the
ACPI driver to achieve the same, likely with less of a change?

Therefore only a few basic comments.

> @@ -1360,24 +1381,27 @@ long set_cx_pminfo(uint32_t acpi_id, struct xen_processor_power *power)
>          set_cx(acpi_power, &xen_cx);
>      }
>  
> -    if ( !cpu_online(cpu_id) )
> -    {
> -        uint32_t apic_id = x86_cpu_to_apicid[cpu_id];
> -
> -        /*
> -         * If we've just learned of more available C states, wake the CPU if
> -         * it's parked, so it can go back to sleep in perhaps a deeper state.
> -         */
> -        if ( park_offline_cpus && apic_id != BAD_APICID )
> -        {
> -            unsigned long flags;
> -
> -            local_irq_save(flags);
> -            apic_wait_icr_idle();
> -            apic_icr_write(APIC_DM_NMI | APIC_DEST_PHYSICAL, apic_id);
> -            local_irq_restore(flags);
> +    if ( cpu_id == 0 && pm_idle_save == NULL ) {
> +        /* Now that we have the ACPI info from dom0, try again to setup
> +         * mwait-idle*/
> +        ret = mwait_idle_init(&cpu_nfb, true);
> +        if (ret >= 0) {
> +            unsigned int cpu;
> +            /* mwait-idle took over, call it's initializer for all CPUs*/
> +            for_each_present_cpu ( cpu )
> +            {
> +                cpu_nfb.notifier_call(&cpu_nfb, CPU_UP_PREPARE, (void *)(long)cpu);
> +                cpu_nfb.notifier_call(&cpu_nfb, CPU_ONLINE, (void *)(long)cpu);
> +                if ( !cpu_online(cpu) ) {
> +                    repark_cpu(cpu);
> +                }
> +            }

Is this safe against a CPU coming online or going offline?

> --- a/xen/arch/x86/cpu/mwait-idle.c
> +++ b/xen/arch/x86/cpu/mwait-idle.c
> @@ -71,13 +71,15 @@
>  #undef PREFIX
>  #define PREFIX "mwait-idle: "
>  
> +#define pr_err(fmt...) printk(KERN_ERR fmt)
> +
>  #ifdef DEBUG
>  # define pr_debug(fmt...) printk(KERN_DEBUG fmt)
>  #else
>  # define pr_debug(fmt...)
>  #endif
>  
> -static __initdata bool opt_mwait_idle = true;
> +static bool opt_mwait_idle = true;
>  boolean_param("mwait-idle", opt_mwait_idle);

The variable still isn't written post-boot, is it? If so, you
want to use __ro_after_init rather than dropping the placement
attribute altogether.

> @@ -92,7 +94,7 @@ static unsigned int mwait_substates;
>   * exclusive C-states, this parameter has no effect.
>   */
>  static unsigned int __ro_after_init preferred_states_mask;
> -static char __initdata preferred_states[64];
> +static char preferred_states[64];
>  string_param("preferred-cstates", preferred_states);

Same here, I suppose.

> @@ -1151,6 +1153,9 @@ static const struct idle_cpu idle_cpu_snr = {
>  	.c1e_promotion = C1E_PROMOTION_DISABLE,
>  };
>  
> +static struct idle_cpu __read_mostly idle_cpu_acpi = {
> +};

No need for an (empty) initializer.

There are also numerous style issues throughout the patch, which would
want correcting in case there's a convincing argument towards going
this route.

Jan
diff mbox series

Patch

diff --git a/xen/arch/x86/acpi/cpu_idle.c b/xen/arch/x86/acpi/cpu_idle.c
index 427c8c89c5..0a357acc58 100644
--- a/xen/arch/x86/acpi/cpu_idle.c
+++ b/xen/arch/x86/acpi/cpu_idle.c
@@ -78,6 +78,7 @@ 
 static void cf_check lapic_timer_nop(void) { }
 void (*__read_mostly lapic_timer_off)(void);
 void (*__read_mostly lapic_timer_on)(void);
+static struct notifier_block cpu_nfb;
 
 bool lapic_timer_init(void)
 {
@@ -1313,6 +1314,26 @@  static void print_cx_pminfo(uint32_t cpu, struct xen_processor_power *power)
 #define print_cx_pminfo(c, p)
 #endif
 
+
+static void repark_cpu(int cpu_id)
+{
+    uint32_t apic_id = x86_cpu_to_apicid[cpu_id];
+
+    /*
+     * If we've just learned of more available C states, wake the CPU if
+     * it's parked, so it can go back to sleep in perhaps a deeper state.
+     */
+    if ( park_offline_cpus && apic_id != BAD_APICID )
+    {
+        unsigned long flags;
+
+        local_irq_save(flags);
+        apic_wait_icr_idle();
+        apic_icr_write(APIC_DM_NMI | APIC_DEST_PHYSICAL, apic_id);
+        local_irq_restore(flags);
+    }
+}
+
 long set_cx_pminfo(uint32_t acpi_id, struct xen_processor_power *power)
 {
     XEN_GUEST_HANDLE(xen_processor_cx_t) states;
@@ -1360,24 +1381,27 @@  long set_cx_pminfo(uint32_t acpi_id, struct xen_processor_power *power)
         set_cx(acpi_power, &xen_cx);
     }
 
-    if ( !cpu_online(cpu_id) )
-    {
-        uint32_t apic_id = x86_cpu_to_apicid[cpu_id];
-
-        /*
-         * If we've just learned of more available C states, wake the CPU if
-         * it's parked, so it can go back to sleep in perhaps a deeper state.
-         */
-        if ( park_offline_cpus && apic_id != BAD_APICID )
-        {
-            unsigned long flags;
-
-            local_irq_save(flags);
-            apic_wait_icr_idle();
-            apic_icr_write(APIC_DM_NMI | APIC_DEST_PHYSICAL, apic_id);
-            local_irq_restore(flags);
+    if ( cpu_id == 0 && pm_idle_save == NULL ) {
+        /* Now that we have the ACPI info from dom0, try again to setup
+         * mwait-idle*/
+        ret = mwait_idle_init(&cpu_nfb, true);
+        if (ret >= 0) {
+            unsigned int cpu;
+            /* mwait-idle took over, call it's initializer for all CPUs*/
+            for_each_present_cpu ( cpu )
+            {
+                cpu_nfb.notifier_call(&cpu_nfb, CPU_UP_PREPARE, (void *)(long)cpu);
+                cpu_nfb.notifier_call(&cpu_nfb, CPU_ONLINE, (void *)(long)cpu);
+                if ( !cpu_online(cpu) ) {
+                    repark_cpu(cpu);
+                }
+            }
+            return 0;
         }
     }
+
+    if ( !cpu_online(cpu_id) )
+        repark_cpu(cpu_id);
     else if ( cpuidle_current_governor->enable )
     {
         ret = cpuidle_current_governor->enable(acpi_power);
@@ -1677,7 +1701,7 @@  static int __init cf_check cpuidle_presmp_init(void)
     if ( !xen_cpuidle )
         return 0;
 
-    mwait_idle_init(&cpu_nfb);
+    mwait_idle_init(&cpu_nfb, false);
     cpu_nfb.notifier_call(&cpu_nfb, CPU_UP_PREPARE, cpu);
     cpu_nfb.notifier_call(&cpu_nfb, CPU_ONLINE, cpu);
     register_cpu_notifier(&cpu_nfb);
diff --git a/xen/arch/x86/cpu/mwait-idle.c b/xen/arch/x86/cpu/mwait-idle.c
index 9e981e7e26..df37224fd9 100644
--- a/xen/arch/x86/cpu/mwait-idle.c
+++ b/xen/arch/x86/cpu/mwait-idle.c
@@ -71,13 +71,15 @@ 
 #undef PREFIX
 #define PREFIX "mwait-idle: "
 
+#define pr_err(fmt...) printk(KERN_ERR fmt)
+
 #ifdef DEBUG
 # define pr_debug(fmt...) printk(KERN_DEBUG fmt)
 #else
 # define pr_debug(fmt...)
 #endif
 
-static __initdata bool opt_mwait_idle = true;
+static bool opt_mwait_idle = true;
 boolean_param("mwait-idle", opt_mwait_idle);
 
 static unsigned int mwait_substates;
@@ -92,7 +94,7 @@  static unsigned int mwait_substates;
  * exclusive C-states, this parameter has no effect.
  */
 static unsigned int __ro_after_init preferred_states_mask;
-static char __initdata preferred_states[64];
+static char preferred_states[64];
 string_param("preferred-cstates", preferred_states);
 
 #define LAPIC_TIMER_ALWAYS_RELIABLE 0xFFFFFFFF
@@ -1151,6 +1153,9 @@  static const struct idle_cpu idle_cpu_snr = {
 	.c1e_promotion = C1E_PROMOTION_DISABLE,
 };
 
+static struct idle_cpu __read_mostly idle_cpu_acpi = {
+};
+
 #define ICPU(model, cpu) \
 	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ ## model, X86_FEATURE_ALWAYS, \
 	  &idle_cpu_ ## cpu}
@@ -1436,21 +1441,92 @@  static void __init mwait_idle_state_table_update(void)
 	}
 }
 
-static int __init mwait_idle_probe(void)
+static int mwait_idle_state_table_from_acpi(void) {
+	// Linux tries every CPU until it finds one that declares FFH as entry
+	// method for all C-states in it's ACPI table. It assumes that the
+	// config is identical for all CPUs. So let's just check the first CPU.
+
+	int rc = -EINVAL;
+	struct acpi_processor_power *acpi_power = processor_powers[0];
+	struct cpuidle_state *state_table = xzalloc_array(
+			struct cpuidle_state,
+			acpi_power->count + 1 /* NULL at end */ - 1 /* no C0 */
+			);
+
+	if (state_table == NULL) {
+		pr_err(PREFIX "failed to allocate state table\n");
+		rc = -ENOMEM;
+		goto ret;
+	}
+
+	for (unsigned int cstate = 1; cstate < acpi_power->count; ++cstate) {
+		struct acpi_processor_cx *acpi_cx = &acpi_power->states[cstate];
+		struct cpuidle_state *idle_cx = &state_table[cstate - 1];
+		if (acpi_cx->entry_method != ACPI_CSTATE_EM_FFH) {
+			pr_debug(PREFIX "ACPI based config not usable: Entry method for C-state %u isn't FFH\n", cstate);
+			rc = -ENODEV;
+			goto ret;
+		}
+
+		snprintf(idle_cx->name, sizeof(idle_cx->name), "C%u", cstate);
+
+		idle_cx->flags = MWAIT2flg(acpi_cx->address);
+		if (acpi_cx->type > ACPI_STATE_C2)
+			idle_cx->flags |= CPUIDLE_FLAG_TLB_FLUSHED;
+		// Like Linux we don't set CPUIDLE_FLAG_IBRS
+
+		idle_cx->exit_latency = acpi_cx->latency;
+
+		idle_cx->target_residency = acpi_cx->latency;
+		if (acpi_cx->type > ACPI_STATE_C1)
+			idle_cx->target_residency *= 3;
+	}
+
+	idle_cpu_acpi.state_table = state_table;
+	rc = 0;
+	pr_debug(PREFIX "config read from ACPI\n");
+
+ret:
+	if (rc < 0 && state_table != NULL) {
+		xfree(state_table);
+	}
+	return rc;
+}
+
+static int mwait_idle_probe(bool from_acpi)
 {
 	unsigned int eax, ebx, ecx;
-	const struct x86_cpu_id *id = x86_match_cpu(intel_idle_ids);
 	const char *str;
 
-	if (!id) {
-		pr_debug(PREFIX "does not run on family %d model %d\n",
-			 boot_cpu_data.x86, boot_cpu_data.x86_model);
-		return -ENODEV;
-	}
+	if (from_acpi) {
+		int rc;
 
-	if (!boot_cpu_has(X86_FEATURE_MONITOR)) {
-		pr_debug(PREFIX "Please enable MWAIT in BIOS SETUP\n");
-		return -ENODEV;
+		if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
+		    boot_cpu_data.x86 != 6 ||
+		    !boot_cpu_has(X86_FEATURE_MONITOR)) {
+			pr_debug(PREFIX "skipping ACPI check on unsupported CPU\n");
+			return -ENODEV;
+		}
+
+		rc = mwait_idle_state_table_from_acpi();
+		if (rc < 0)
+			return rc;
+
+		icpu = &idle_cpu_acpi;
+	} else {
+		const struct x86_cpu_id *id = x86_match_cpu(intel_idle_ids);
+		if (!id) {
+			pr_debug(PREFIX "no interal config for family %d model %d\n",
+				 boot_cpu_data.x86, boot_cpu_data.x86_model);
+			return -ENODEV;
+		}
+
+		if (!boot_cpu_has(X86_FEATURE_MONITOR)) {
+			pr_debug(PREFIX "Please enable MWAIT in BIOS SETUP\n");
+			return -ENODEV;
+		}
+
+		icpu = id->driver_data;
 	}
 
 	if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
@@ -1470,7 +1546,6 @@  static int __init mwait_idle_probe(void)
 
 	pr_debug(PREFIX "MWAIT substates: %#x\n", mwait_substates);
 
-	icpu = id->driver_data;
 	cpuidle_state_table = icpu->state_table;
 
 	if (boot_cpu_has(X86_FEATURE_ARAT))
@@ -1515,7 +1590,8 @@  static int __init mwait_idle_probe(void)
 	if (str[0])
 		printk("unrecognized \"preferred-cstates=%s\"\n", str);
 
-	mwait_idle_state_table_update();
+	if (!from_acpi)
+		mwait_idle_state_table_update();
 
 	return 0;
 }
@@ -1624,14 +1700,14 @@  static int cf_check mwait_idle_cpu_init(
 	return NOTIFY_DONE;
 }
 
-int __init mwait_idle_init(struct notifier_block *nfb)
+int mwait_idle_init(struct notifier_block *nfb, bool from_acpi)
 {
 	int err;
 
 	if (pm_idle_save)
 		return -ENODEV;
 
-	err = mwait_idle_probe();
+	err = mwait_idle_probe(from_acpi);
 	if (!err && !boot_cpu_has(X86_FEATURE_ARAT)) {
 		hpet_broadcast_init();
 		if (xen_cpuidle < 0 && !hpet_broadcast_is_available())
diff --git a/xen/arch/x86/include/asm/cpuidle.h b/xen/arch/x86/include/asm/cpuidle.h
index 3edd7a75d2..f8913c7304 100644
--- a/xen/arch/x86/include/asm/cpuidle.h
+++ b/xen/arch/x86/include/asm/cpuidle.h
@@ -15,7 +15,7 @@  extern void (*lapic_timer_on)(void);
 
 extern uint64_t (*cpuidle_get_tick)(void);
 
-int mwait_idle_init(struct notifier_block *);
+int mwait_idle_init(struct notifier_block *, bool);
 int cpuidle_init_cpu(unsigned int cpu);
 void cf_check default_dead_idle(void);
 void cf_check acpi_dead_idle(void);