diff mbox series

[v3,02/15] arm64: dts: qcom: sm6125: Sort spmi_bus node numerically by reg

Message ID 20230718-sm6125-dpu-v3-2-6c5a56e99820@somainline.org (mailing list archive)
State Superseded
Headers show
Series drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel | expand

Commit Message

Marijn Suijten July 18, 2023, 9:24 p.m. UTC 
This node has always resided in the wrong spot, making it somewhat
harder to contribute new node entries while maintaining proper sorting
around it.  Move the node up to sit after hsusb_phy1 where it maintains
proper numerical sorting on the (first of its many) reg address
property.

Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 38 ++++++++++++++++++------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

Comments

Dmitry Baryshkov July 18, 2023, 10:02 p.m. UTC | #1 
On 19/07/2023 00:24, Marijn Suijten wrote:
> This node has always resided in the wrong spot, making it somewhat
> harder to contribute new node entries while maintaining proper sorting
> around it.  Move the node up to sit after hsusb_phy1 where it maintains
> proper numerical sorting on the (first of its many) reg address
> property.
> 
> Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>   arch/arm64/boot/dts/qcom/sm6125.dtsi | 38 ++++++++++++++++++------------------
>   1 file changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index 6937c7ebdb81..cfd0901d4555 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -684,6 +684,24 @@ hsusb_phy1: phy@1613000 {
>   			status = "disabled";
>   		};
>   
> +		spmi_bus: spmi@1c40000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x01c40000 0x1100>,
> +			      <0x01e00000 0x2000000>,
> +			      <0x03e00000 0x100000>,
> +			      <0x03f00000 0xa0000>,
> +			      <0x01c0a000 0x26000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
>   		rpm_msg_ram: sram@45f0000 {
>   			compatible = "qcom,rpm-msg-ram";
>   			reg = <0x045f0000 0x7000>;
> @@ -1189,27 +1207,9 @@ sram@4690000 {
>   			reg = <0x04690000 0x10000>;
>   		};
>   
> -		spmi_bus: spmi@1c40000 {
> -			compatible = "qcom,spmi-pmic-arb";
> -			reg = <0x01c40000 0x1100>,
> -			      <0x01e00000 0x2000000>,
> -			      <0x03e00000 0x100000>,
> -			      <0x03f00000 0xa0000>,
> -			      <0x01c0a000 0x26000>;
> -			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> -			interrupt-names = "periph_irq";
> -			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> -			qcom,ee = <0>;
> -			qcom,channel = <0>;
> -			#address-cells = <2>;
> -			#size-cells = <0>;
> -			interrupt-controller;
> -			#interrupt-cells = <4>;
> -		};
> -
>   		apps_smmu: iommu@c600000 {
>   			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> -			reg = <0xc600000 0x80000>;
> +			reg = <0x0c600000 0x80000>;

Irrelevant, please split.

>   			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
>   				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
>   				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
>
Marijn Suijten July 19, 2023, 9:54 p.m. UTC | #2 
On 2023-07-19 01:02:56, Dmitry Baryshkov wrote:
> On 19/07/2023 00:24, Marijn Suijten wrote:
> > This node has always resided in the wrong spot, making it somewhat
> > harder to contribute new node entries while maintaining proper sorting
> > around it.  Move the node up to sit after hsusb_phy1 where it maintains
> > proper numerical sorting on the (first of its many) reg address
> > property.
> > 
> > Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
> > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> > ---
> >   arch/arm64/boot/dts/qcom/sm6125.dtsi | 38 ++++++++++++++++++------------------
> >   1 file changed, 19 insertions(+), 19 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > index 6937c7ebdb81..cfd0901d4555 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > @@ -684,6 +684,24 @@ hsusb_phy1: phy@1613000 {
> >   			status = "disabled";
> >   		};
> >   
> > +		spmi_bus: spmi@1c40000 {
> > +			compatible = "qcom,spmi-pmic-arb";
> > +			reg = <0x01c40000 0x1100>,
> > +			      <0x01e00000 0x2000000>,
> > +			      <0x03e00000 0x100000>,
> > +			      <0x03f00000 0xa0000>,
> > +			      <0x01c0a000 0x26000>;
> > +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> > +			interrupt-names = "periph_irq";
> > +			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> > +			qcom,ee = <0>;
> > +			qcom,channel = <0>;
> > +			#address-cells = <2>;
> > +			#size-cells = <0>;
> > +			interrupt-controller;
> > +			#interrupt-cells = <4>;
> > +		};
> > +
> >   		rpm_msg_ram: sram@45f0000 {
> >   			compatible = "qcom,rpm-msg-ram";
> >   			reg = <0x045f0000 0x7000>;
> > @@ -1189,27 +1207,9 @@ sram@4690000 {
> >   			reg = <0x04690000 0x10000>;
> >   		};
> >   
> > -		spmi_bus: spmi@1c40000 {
> > -			compatible = "qcom,spmi-pmic-arb";
> > -			reg = <0x01c40000 0x1100>,
> > -			      <0x01e00000 0x2000000>,
> > -			      <0x03e00000 0x100000>,
> > -			      <0x03f00000 0xa0000>,
> > -			      <0x01c0a000 0x26000>;
> > -			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> > -			interrupt-names = "periph_irq";
> > -			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> > -			qcom,ee = <0>;
> > -			qcom,channel = <0>;
> > -			#address-cells = <2>;
> > -			#size-cells = <0>;
> > -			interrupt-controller;
> > -			#interrupt-cells = <4>;
> > -		};
> > -
> >   		apps_smmu: iommu@c600000 {
> >   			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> > -			reg = <0xc600000 0x80000>;
> > +			reg = <0x0c600000 0x80000>;
> 
> Irrelevant, please split.

This was already here in v1, and it is what likely contributed to the
sorting mismatch in the first place.

But will split it and send a v4 for just this...

- Marijn
AngeloGioacchino Del Regno July 20, 2023, 7:42 a.m. UTC | #3 
Il 19/07/23 23:54, Marijn Suijten ha scritto:
> On 2023-07-19 01:02:56, Dmitry Baryshkov wrote:
>> On 19/07/2023 00:24, Marijn Suijten wrote:
>>> This node has always resided in the wrong spot, making it somewhat
>>> harder to contribute new node entries while maintaining proper sorting
>>> around it.  Move the node up to sit after hsusb_phy1 where it maintains
>>> proper numerical sorting on the (first of its many) reg address
>>> property.
>>>
>>> Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
>>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
>>> ---
>>>    arch/arm64/boot/dts/qcom/sm6125.dtsi | 38 ++++++++++++++++++------------------
>>>    1 file changed, 19 insertions(+), 19 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
>>> index 6937c7ebdb81..cfd0901d4555 100644
>>> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
>>> @@ -684,6 +684,24 @@ hsusb_phy1: phy@1613000 {
>>>    			status = "disabled";
>>>    		};
>>>    
>>> +		spmi_bus: spmi@1c40000 {
>>> +			compatible = "qcom,spmi-pmic-arb";
>>> +			reg = <0x01c40000 0x1100>,
>>> +			      <0x01e00000 0x2000000>,
>>> +			      <0x03e00000 0x100000>,
>>> +			      <0x03f00000 0xa0000>,
>>> +			      <0x01c0a000 0x26000>;
>>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>> +			interrupt-names = "periph_irq";
>>> +			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
>>> +			qcom,ee = <0>;
>>> +			qcom,channel = <0>;
>>> +			#address-cells = <2>;
>>> +			#size-cells = <0>;
>>> +			interrupt-controller;
>>> +			#interrupt-cells = <4>;
>>> +		};
>>> +
>>>    		rpm_msg_ram: sram@45f0000 {
>>>    			compatible = "qcom,rpm-msg-ram";
>>>    			reg = <0x045f0000 0x7000>;
>>> @@ -1189,27 +1207,9 @@ sram@4690000 {
>>>    			reg = <0x04690000 0x10000>;
>>>    		};
>>>    
>>> -		spmi_bus: spmi@1c40000 {
>>> -			compatible = "qcom,spmi-pmic-arb";
>>> -			reg = <0x01c40000 0x1100>,
>>> -			      <0x01e00000 0x2000000>,
>>> -			      <0x03e00000 0x100000>,
>>> -			      <0x03f00000 0xa0000>,
>>> -			      <0x01c0a000 0x26000>;
>>> -			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>> -			interrupt-names = "periph_irq";
>>> -			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
>>> -			qcom,ee = <0>;
>>> -			qcom,channel = <0>;
>>> -			#address-cells = <2>;
>>> -			#size-cells = <0>;
>>> -			interrupt-controller;
>>> -			#interrupt-cells = <4>;
>>> -		};
>>> -
>>>    		apps_smmu: iommu@c600000 {
>>>    			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
>>> -			reg = <0xc600000 0x80000>;
>>> +			reg = <0x0c600000 0x80000>;
>>
>> Irrelevant, please split.
> 
> This was already here in v1, and it is what likely contributed to the
> sorting mismatch in the first place.
> 
> But will split it and send a v4 for just this...
> 

I agree in that it is irrelevant, but anyway, for the next time: you should at
least mention "the other change" in your commit message ;-)

Also, remember that this commit has a Fixes tag........ :-)

Cheers,
Angelo
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 6937c7ebdb81..cfd0901d4555 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -684,6 +684,24 @@  hsusb_phy1: phy@1613000 {
 			status = "disabled";
 		};
 
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x01c40000 0x1100>,
+			      <0x01e00000 0x2000000>,
+			      <0x03e00000 0x100000>,
+			      <0x03f00000 0xa0000>,
+			      <0x01c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x045f0000 0x7000>;
@@ -1189,27 +1207,9 @@  sram@4690000 {
 			reg = <0x04690000 0x10000>;
 		};
 
-		spmi_bus: spmi@1c40000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x01c40000 0x1100>,
-			      <0x01e00000 0x2000000>,
-			      <0x03e00000 0x100000>,
-			      <0x03f00000 0xa0000>,
-			      <0x01c0a000 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
-			reg = <0xc600000 0x80000>;
+			reg = <0x0c600000 0x80000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,