| Message ID | 20230720052054.3909902-1-huqiang.qin@amlogic.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs | expand |
Hello Huqiang! Thank you for the patchset! On Thu, Jul 20, 2023 at 01:20:54PM +0800, Huqiang Qin wrote: > Add gpio interrupt controller device and pinctrl device. > > Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com> > --- > arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 25 +++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > index 60ad4f3eef9d..4ad9c042f85c 100644 > --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > @@ -82,6 +82,31 @@ uart_b: serial@7a000 { > clock-names = "xtal", "pclk", "baud"; > }; > > + gpio_intc: interrupt-controller@4080 { > + compatible = "amlogic,meson-gpio-intc", > + "amlogic,c3-gpio-intc"; > + reg = <0x0 0x4080 0x0 0x0020>; > + interrupt-controller; > + #interrupt-cells = <2>; > + amlogic,channel-interrupts = > + <10 11 12 13 14 15 16 17 18 19 20 21>; > + }; > + > + periphs_pinctrl: pinctrl@4000 { Please sort dts nodes by reg offset in the one bus declaration. > + compatible = "amlogic,c3-periphs-pinctrl"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + gpio: bank@4000 { > + reg = <0x0 0x4000 0x0 0x004c>, > + <0x0 0x4100 0x0 0x01de>; > + reg-names = "mux", "gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&periphs_pinctrl 0 0 55>; > + }; > + }; > }; > }; > }; > -- > 2.37.1 > > > _______________________________________________ > linux-amlogic mailing list > linux-amlogic@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-amlogic
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 60ad4f3eef9d..4ad9c042f85c 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -82,6 +82,31 @@ uart_b: serial@7a000 { clock-names = "xtal", "pclk", "baud"; }; + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,meson-gpio-intc", + "amlogic,c3-gpio-intc"; + reg = <0x0 0x4080 0x0 0x0020>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,c3-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4000 { + reg = <0x0 0x4000 0x0 0x004c>, + <0x0 0x4100 0x0 0x01de>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 55>; + }; + }; }; }; };
Add gpio interrupt controller device and pinctrl device. Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com> --- arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 25 +++++++++++++++++++++ 1 file changed, 25 insertions(+)