| Message ID | 20230725142616.157405-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] arm64: dts: rockchip: rk3399: switch to enable-gpios | expand |
On Tue, 25 Jul 2023 16:26:15 +0200, Krzysztof Kozlowski wrote: > The recommended name for enable GPIOs property in regulator-gpio is > enable-gpios. This is also required by bindings: > > rk3399-gru-bob.dtb: ppvar-sd-card-io: Unevaluated properties are not allowed ('enable-gpio' was unexpected) > > Applied, thanks! [1/2] arm64: dts: rockchip: rk3399: switch to enable-gpios commit: fcedb69be2700d5d07634bcdf06ca98e20a19677 [2/2] arm64: dts: rockchip: px30-engicam: switch to enable-gpios commit: a02913e886351f039b9d5346be7926c1b05a3eef Best regards,
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 23bfba86daab..c9bf1d5c3a42 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -250,7 +250,7 @@ ppvar_sd_card_io: ppvar-sd-card-io { pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>; enable-active-high; - enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; states = <1800000 0x1>, <3000000 0x0>;
The recommended name for enable GPIOs property in regulator-gpio is enable-gpios. This is also required by bindings: rk3399-gru-bob.dtb: ppvar-sd-card-io: Unevaluated properties are not allowed ('enable-gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)