diff mbox series

[v5,06/11] wifi: ath12k: prepare EHT peer assoc parameters

Message ID 20230725224034.14045-7-quic_alokad@quicinc.com (mailing list archive)
State Accepted
Commit 17bbb8aa74fded03527427c25f43a29590c6a9ab
Delegated to: Kalle Valo
Headers show
Series wifi: ath12k: (v5) EHT support | expand

Commit Message

Aloka Dixit July 25, 2023, 10:40 p.m. UTC
Add new parameters and prepare the association data for an EHT peer.
MCS data uses the format described in IEEE P802.11be/D2.0, May 2022,
9.4.2.313.4, convert it into the format expected by the firmware.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
---
v5: Cleaned up bit shifting of val in ath12k_mac_set_eht_ppe_threshold().
Used hweight16() instead of hweight8() for
IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK.
Instead of using peer_phymode to decide between a 20 MHz-only peer and
a peer supporting bandwidths <= 80 MHz, ath12k_peer_assoc_h_eht() uses
HE capabilities.
v4: No change from v3.
v3: Incremented peer_eht_mcs_count for IEEE80211_STA_RX_BW_160 in
ath12k_peer_assoc_h_eht().
v2: No change from v1.

 drivers/net/wireless/ath/ath12k/mac.c | 144 ++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath12k/wmi.h |  17 +++
 2 files changed, 161 insertions(+)

Comments

Wen Gong July 26, 2023, 3:43 a.m. UTC | #1
On 7/26/2023 6:40 AM, Aloka Dixit wrote:
[...]
> +
> +static void ath12k_peer_assoc_h_eht(struct ath12k *ar,
> +				    struct ieee80211_vif *vif,
> +				    struct ieee80211_sta *sta,
> +				    struct ath12k_wmi_peer_assoc_arg *arg)
> +{
> +	const struct ieee80211_sta_eht_cap *eht_cap = &sta->deflink.eht_cap;
> +	const struct ieee80211_sta_he_cap *he_cap = &sta->deflink.he_cap;
[...]
> +	default:
> +		if ((he_cap->he_cap_elem.phy_cap_info[0] &
> +		     (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G |
> +		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
> +		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
> +		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)) == 0) {
> +			const struct ieee80211_eht_mcs_nss_supp_20mhz_only *bw_20 =
> +					&eht_cap->eht_mcs_nss_supp.only_20mhz;
> +
This is the IEs of my AP below, then it will still entered into this 
branch for my ath12k station mode.
sta->deflink.eht_cap and sta->deflink.he_cap is copied from peer remote, 
for ath12k station mode, peer
remote is the AP. The field only_20mhz is only valid when the IEs is 
from a station which only support
20 MHz.

I think the flag from_ap should be added here as well as function 
ieee80211_eht_mcs_nss_size().

Please correct me if wrong.

Ext Tag: HE Capabilities (IEEE Std 802.11ax/D3.0)
     Tag Number: Element ID Extension (255)
     Ext Tag length: 29
     Ext Tag Number: HE Capabilities (IEEE Std 802.11ax/D3.0) (35)
     HE MAC Capabilities Information: 0x10401a08010d
     HE Phy Capabilities Information
         .... ...0 = Reserved: 0x0
         0000 000. = Channel Width Set: 0x00
             .... ..0. = 40MHz in 2.4GHz band: Not supported
             .... .0.. = 40 & 80MHz in the 5GHz or 6GHz band: Not supported
             .... 0... = 160MHz in the 5GHz or 6GHz band: Not supported
             ...0 .... = 160/80+80MHz in the 5GHz or 6GHz band: Not 
supported
             ..0. .... = 242 tone RUs in the 2.4GHz band: Not supported
             .0.. .... = 242 tone RUs in the 5GHz or 6GHz band: Not 
supported
             0... .... = Reserved: 0x0
         Bits 8 to 23: 0x4063
         Bits 24 to 39: 0x1f88
         Bits 40 to 55: 0x8141
         Bits 56 to 71: 0x111c
         Bits 72 to 87: 0x0008
     Supported HE-MCS and NSS Set
     PPE Thresholds

Ext Tag: EHT Capabilities (IEEE Std 802.11be/D2.0)
     Tag Number: Element ID Extension (255)
     Ext Tag length: 15
     Ext Tag Number: EHT Capabilities (IEEE Std 802.11be/D2.0) (108)
     EHT MAC Capabilities Information: 0x0000
     EHT PHY Capabilities Information
     Supported EHT-MCS and NSS Set
         EHT-MCS Map (BW <= 80MHz): 0x222222
             .... .... .... .... .... 0010 = Rx Max Nss That Supports 
EHT-MCS 0-9: 2
             .... .... .... .... 0010 .... = Tx Max Nss That Supports 
EHT-MCS 0-9: 2
             .... .... .... 0010 .... .... = Rx Max Nss That Supports 
EHT-MCS 10-11: 2
             .... .... 0010 .... .... .... = Tx Max Nss That Supports 
EHT-MCS 10-11: 2
             .... 0010 .... .... .... .... = Rx Max Nss That Supports 
EHT-MCS 12-13: 2
             0010 .... .... .... .... .... = Tx Max Nss That Supports 
EHT-MCS 12-13: 2
     EHT PPE Thresholds: <MISSING>

> +			ath12k_mac_set_eht_mcs(bw_20->rx_tx_mcs7_max_nss,
> +					       bw_20->rx_tx_mcs9_max_nss,
> +					       bw_20->rx_tx_mcs11_max_nss,
> +					       bw_20->rx_tx_mcs13_max_nss,
> +					       &rx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80],
> +					       &tx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80]);
> +		} else {
> +			bw = &eht_cap->eht_mcs_nss_supp.bw._80;
> +			ath12k_mac_set_eht_mcs(bw->rx_tx_mcs9_max_nss,
> +					       bw->rx_tx_mcs9_max_nss,
> +					       bw->rx_tx_mcs11_max_nss,
> +					       bw->rx_tx_mcs13_max_nss,
> +					       &rx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80],
> +					       &tx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80]);
> +		}
> +
> +		arg->peer_eht_mcs_count++;
> +		break;
> +	}
> +}
> +
[...]
Aloka Dixit July 26, 2023, 4:38 p.m. UTC | #2
On 7/25/2023 8:43 PM, Wen Gong wrote:
> On 7/26/2023 6:40 AM, Aloka Dixit wrote:
> [...]
>> +
>> +static void ath12k_peer_assoc_h_eht(struct ath12k *ar,
>> +                    struct ieee80211_vif *vif,
>> +                    struct ieee80211_sta *sta,
>> +                    struct ath12k_wmi_peer_assoc_arg *arg)
>> +{
>> +    const struct ieee80211_sta_eht_cap *eht_cap = &sta->deflink.eht_cap;
>> +    const struct ieee80211_sta_he_cap *he_cap = &sta->deflink.he_cap;
> [...]
>> +    default:
>> +        if ((he_cap->he_cap_elem.phy_cap_info[0] &
>> +             (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G |
>> +              
>> IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
>> +              IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
>> +              
>> IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)) == 0) {
>> +            const struct ieee80211_eht_mcs_nss_supp_20mhz_only *bw_20 =
>> +                    &eht_cap->eht_mcs_nss_supp.only_20mhz;
>> +
> This is the IEs of my AP below, then it will still entered into this 
> branch for my ath12k station mode.
> sta->deflink.eht_cap and sta->deflink.he_cap is copied from peer remote, 
> for ath12k station mode, peer
> remote is the AP. The field only_20mhz is only valid when the IEs is 
> from a station which only support
> 20 MHz.
> 
> I think the flag from_ap should be added here as well as function 
> ieee80211_eht_mcs_nss_size().
> 
> Please correct me if wrong.
> 

Okay, can you fix this in a follow-up patch?
I don't have a device to test the station mode to verify a fix.
Thanks.
Wen Gong July 27, 2023, 5:48 a.m. UTC | #3
On 7/27/2023 12:38 AM, Aloka Dixit wrote:
> On 7/25/2023 8:43 PM, Wen Gong wrote:
>> On 7/26/2023 6:40 AM, Aloka Dixit wrote:
>> [...]
>>> +
>>> +static void ath12k_peer_assoc_h_eht(struct ath12k *ar,
>>> +                    struct ieee80211_vif *vif,
>>> +                    struct ieee80211_sta *sta,
>>> +                    struct ath12k_wmi_peer_assoc_arg *arg)
>>> +{
>>> +    const struct ieee80211_sta_eht_cap *eht_cap = 
>>> &sta->deflink.eht_cap;
>>> +    const struct ieee80211_sta_he_cap *he_cap = &sta->deflink.he_cap;
>> [...]
>>> +    default:
>>> +        if ((he_cap->he_cap_elem.phy_cap_info[0] &
>>> + (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G |
>>> + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
>>> + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
>>> + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)) == 0) {
>>> +            const struct ieee80211_eht_mcs_nss_supp_20mhz_only 
>>> *bw_20 =
>>> + &eht_cap->eht_mcs_nss_supp.only_20mhz;
>>> +
>> This is the IEs of my AP below, then it will still entered into this 
>> branch for my ath12k station mode.
>> sta->deflink.eht_cap and sta->deflink.he_cap is copied from peer 
>> remote, for ath12k station mode, peer
>> remote is the AP. The field only_20mhz is only valid when the IEs is 
>> from a station which only support
>> 20 MHz.
>>
>> I think the flag from_ap should be added here as well as function 
>> ieee80211_eht_mcs_nss_size().
>>
>> Please correct me if wrong.
>>
>
> Okay, can you fix this in a follow-up patch?
> I don't have a device to test the station mode to verify a fix.
> Thanks.
The fix patch is simple like this (I have verified OK), you can merge it 
to your patch.
Aloka Dixit July 27, 2023, 4:59 p.m. UTC | #4
On 7/26/2023 10:48 PM, Wen Gong wrote:
> On 7/27/2023 12:38 AM, Aloka Dixit wrote:
>> On 7/25/2023 8:43 PM, Wen Gong wrote:
>>> On 7/26/2023 6:40 AM, Aloka Dixit wrote:
>>> [...]
>>>> +
>>>> +static void ath12k_peer_assoc_h_eht(struct ath12k *ar,
>>>> +                    struct ieee80211_vif *vif,
>>>> +                    struct ieee80211_sta *sta,
>>>> +                    struct ath12k_wmi_peer_assoc_arg *arg)
>>>> +{
>>>> +
>>> This is the IEs of my AP below, then it will still entered into this 
>>> branch for my ath12k station mode.
>>> sta->deflink.eht_cap and sta->deflink.he_cap is copied from peer 
>>> remote, for ath12k station mode, peer
>>> remote is the AP. The field only_20mhz is only valid when the IEs is 
>>> from a station which only support
>>> 20 MHz.
>>>
>>> I think the flag from_ap should be added here as well as function 
>>> ieee80211_eht_mcs_nss_size().
>>>
>>> Please correct me if wrong.
>>>
>>
>> Okay, can you fix this in a follow-up patch?
>> I don't have a device to test the station mode to verify a fix.
>> Thanks.
> The fix patch is simple like this (I have verified OK), you can merge it 
> to your patch.
Wen Gong July 28, 2023, 2:50 a.m. UTC | #5
On 7/28/2023 12:59 AM, Aloka Dixit wrote:
> On 7/26/2023 10:48 PM, Wen Gong wrote:
>> On 7/27/2023 12:38 AM, Aloka Dixit wrote:
>>> On 7/25/2023 8:43 PM, Wen Gong wrote:
>>>> On 7/26/2023 6:40 AM, Aloka Dixit wrote:
>>>> [...]
>>>>> +
>>>>> +static void ath12k_peer_assoc_h_eht(struct ath12k *ar,
>>>>> +                    struct ieee80211_vif *vif,
>>>>> +                    struct ieee80211_sta *sta,
>>>>> +                    struct ath12k_wmi_peer_assoc_arg *arg)
>>>>> +{
>>>>> +
>>>> This is the IEs of my AP below, then it will still entered into 
>>>> this branch for my ath12k station mode.
>>>> sta->deflink.eht_cap and sta->deflink.he_cap is copied from peer 
>>>> remote, for ath12k station mode, peer
>>>> remote is the AP. The field only_20mhz is only valid when the IEs 
>>>> is from a station which only support
>>>> 20 MHz.
>>>>
>>>> I think the flag from_ap should be added here as well as function 
>>>> ieee80211_eht_mcs_nss_size().
>>>>
>>>> Please correct me if wrong.
>>>>
>>>
>>> Okay, can you fix this in a follow-up patch?
>>> I don't have a device to test the station mode to verify a fix.
>>> Thanks.
>> The fix patch is simple like this (I have verified OK), you can merge 
>> it to your patch.
Kalle Valo Aug. 3, 2023, 8:59 a.m. UTC | #6
Aloka Dixit <quic_alokad@quicinc.com> writes:

> On 7/26/2023 10:48 PM, Wen Gong wrote:
>
>> On 7/27/2023 12:38 AM, Aloka Dixit wrote:
>>> On 7/25/2023 8:43 PM, Wen Gong wrote:
>>>> On 7/26/2023 6:40 AM, Aloka Dixit wrote:
>>>> [...]
>>>>> +
>>>>> +static void ath12k_peer_assoc_h_eht(struct ath12k *ar,
>>>>> +                    struct ieee80211_vif *vif,
>>>>> +                    struct ieee80211_sta *sta,
>>>>> +                    struct ath12k_wmi_peer_assoc_arg *arg)
>>>>> +{
>>>>> +
>>>> This is the IEs of my AP below, then it will still entered into
>>>> this branch for my ath12k station mode.
>>>> sta->deflink.eht_cap and sta->deflink.he_cap is copied from peer
>>>> remote, for ath12k station mode, peer
>>>> remote is the AP. The field only_20mhz is only valid when the IEs
>>>> is from a station which only support
>>>> 20 MHz.
>>>>
>>>> I think the flag from_ap should be added here as well as function
>>>> ieee80211_eht_mcs_nss_size().
>>>>
>>>> Please correct me if wrong.
>>>>
>>>
>>> Okay, can you fix this in a follow-up patch?
>>> I don't have a device to test the station mode to verify a fix.
>>> Thanks.
>> The fix patch is simple like this (I have verified OK), you can
>> merge it to your patch.
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 379090ba107f..6fc645dfa96f 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -2067,6 +2067,149 @@  static void ath12k_peer_assoc_h_phymode(struct ath12k *ar,
 	WARN_ON(phymode == MODE_UNKNOWN);
 }
 
+static void ath12k_mac_set_eht_mcs(u8 rx_tx_mcs7, u8 rx_tx_mcs9,
+				   u8 rx_tx_mcs11, u8 rx_tx_mcs13,
+				   u32 *rx_mcs, u32 *tx_mcs)
+{
+	*rx_mcs = 0;
+	u32p_replace_bits(rx_mcs,
+			  u8_get_bits(rx_tx_mcs7, IEEE80211_EHT_MCS_NSS_RX),
+			  WMI_EHT_MCS_NSS_0_7);
+	u32p_replace_bits(rx_mcs,
+			  u8_get_bits(rx_tx_mcs9, IEEE80211_EHT_MCS_NSS_RX),
+			  WMI_EHT_MCS_NSS_8_9);
+	u32p_replace_bits(rx_mcs,
+			  u8_get_bits(rx_tx_mcs11, IEEE80211_EHT_MCS_NSS_RX),
+			  WMI_EHT_MCS_NSS_10_11);
+	u32p_replace_bits(rx_mcs,
+			  u8_get_bits(rx_tx_mcs13, IEEE80211_EHT_MCS_NSS_RX),
+			  WMI_EHT_MCS_NSS_12_13);
+
+	*tx_mcs = 0;
+	u32p_replace_bits(tx_mcs,
+			  u8_get_bits(rx_tx_mcs7, IEEE80211_EHT_MCS_NSS_TX),
+			  WMI_EHT_MCS_NSS_0_7);
+	u32p_replace_bits(tx_mcs,
+			  u8_get_bits(rx_tx_mcs9, IEEE80211_EHT_MCS_NSS_TX),
+			  WMI_EHT_MCS_NSS_8_9);
+	u32p_replace_bits(tx_mcs,
+			  u8_get_bits(rx_tx_mcs11, IEEE80211_EHT_MCS_NSS_TX),
+			  WMI_EHT_MCS_NSS_10_11);
+	u32p_replace_bits(tx_mcs,
+			  u8_get_bits(rx_tx_mcs13, IEEE80211_EHT_MCS_NSS_TX),
+			  WMI_EHT_MCS_NSS_12_13);
+}
+
+static void ath12k_mac_set_eht_ppe_threshold(const u8 *ppe_thres,
+					     struct ath12k_wmi_ppe_threshold_arg *ppet)
+{
+	u32 bit_pos = IEEE80211_EHT_PPE_THRES_INFO_HEADER_SIZE, val;
+	u8 nss, ru, i;
+	u8 ppet_bit_len_per_ru = IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE * 2;
+
+	ppet->numss_m1 = u8_get_bits(ppe_thres[0], IEEE80211_EHT_PPE_THRES_NSS_MASK);
+	ppet->ru_bit_mask = u16_get_bits(get_unaligned_le16(ppe_thres),
+					 IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK);
+
+	for (nss = 0; nss <= ppet->numss_m1; nss++) {
+		for (ru = 0;
+		     ru < hweight16(IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK);
+		     ru++) {
+			if ((ppet->ru_bit_mask & BIT(ru)) == 0)
+				continue;
+
+			val = 0;
+			for (i = 0; i < ppet_bit_len_per_ru; i++) {
+				val |= (((ppe_thres[bit_pos / 8] >>
+					  (bit_pos % 8)) & 0x1) << i);
+				bit_pos++;
+			}
+			ppet->ppet16_ppet8_ru3_ru0[nss] |=
+					(val << (ru * ppet_bit_len_per_ru));
+		}
+	}
+}
+
+static void ath12k_peer_assoc_h_eht(struct ath12k *ar,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_sta *sta,
+				    struct ath12k_wmi_peer_assoc_arg *arg)
+{
+	const struct ieee80211_sta_eht_cap *eht_cap = &sta->deflink.eht_cap;
+	const struct ieee80211_sta_he_cap *he_cap = &sta->deflink.he_cap;
+	const struct ieee80211_eht_mcs_nss_supp_bw *bw;
+	u32 *rx_mcs, *tx_mcs;
+
+	if (!sta->deflink.he_cap.has_he || !eht_cap->has_eht)
+		return;
+
+	arg->eht_flag = true;
+
+	if ((eht_cap->eht_cap_elem.phy_cap_info[5] &
+	     IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT) &&
+	    eht_cap->eht_ppe_thres[0] != 0)
+		ath12k_mac_set_eht_ppe_threshold(eht_cap->eht_ppe_thres,
+						 &arg->peer_eht_ppet);
+
+	memcpy(arg->peer_eht_cap_mac, eht_cap->eht_cap_elem.mac_cap_info,
+	       sizeof(eht_cap->eht_cap_elem.mac_cap_info));
+	memcpy(arg->peer_eht_cap_phy, eht_cap->eht_cap_elem.phy_cap_info,
+	       sizeof(eht_cap->eht_cap_elem.phy_cap_info));
+
+	rx_mcs = arg->peer_eht_rx_mcs_set;
+	tx_mcs = arg->peer_eht_tx_mcs_set;
+
+	switch (sta->deflink.bandwidth) {
+	case IEEE80211_STA_RX_BW_320:
+		bw = &eht_cap->eht_mcs_nss_supp.bw._320;
+		ath12k_mac_set_eht_mcs(bw->rx_tx_mcs9_max_nss,
+				       bw->rx_tx_mcs9_max_nss,
+				       bw->rx_tx_mcs11_max_nss,
+				       bw->rx_tx_mcs13_max_nss,
+				       &rx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_320],
+				       &tx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_320]);
+		arg->peer_eht_mcs_count++;
+		fallthrough;
+	case IEEE80211_STA_RX_BW_160:
+		bw = &eht_cap->eht_mcs_nss_supp.bw._160;
+		ath12k_mac_set_eht_mcs(bw->rx_tx_mcs9_max_nss,
+				       bw->rx_tx_mcs9_max_nss,
+				       bw->rx_tx_mcs11_max_nss,
+				       bw->rx_tx_mcs13_max_nss,
+				       &rx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_160],
+				       &tx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_160]);
+		arg->peer_eht_mcs_count++;
+		fallthrough;
+	default:
+		if ((he_cap->he_cap_elem.phy_cap_info[0] &
+		     (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G |
+		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)) == 0) {
+			const struct ieee80211_eht_mcs_nss_supp_20mhz_only *bw_20 =
+					&eht_cap->eht_mcs_nss_supp.only_20mhz;
+
+			ath12k_mac_set_eht_mcs(bw_20->rx_tx_mcs7_max_nss,
+					       bw_20->rx_tx_mcs9_max_nss,
+					       bw_20->rx_tx_mcs11_max_nss,
+					       bw_20->rx_tx_mcs13_max_nss,
+					       &rx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80],
+					       &tx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80]);
+		} else {
+			bw = &eht_cap->eht_mcs_nss_supp.bw._80;
+			ath12k_mac_set_eht_mcs(bw->rx_tx_mcs9_max_nss,
+					       bw->rx_tx_mcs9_max_nss,
+					       bw->rx_tx_mcs11_max_nss,
+					       bw->rx_tx_mcs13_max_nss,
+					       &rx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80],
+					       &tx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80]);
+		}
+
+		arg->peer_eht_mcs_count++;
+		break;
+	}
+}
+
 static void ath12k_peer_assoc_prepare(struct ath12k *ar,
 				      struct ieee80211_vif *vif,
 				      struct ieee80211_sta *sta,
@@ -2086,6 +2229,7 @@  static void ath12k_peer_assoc_prepare(struct ath12k *ar,
 	ath12k_peer_assoc_h_ht(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_vht(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_he(ar, vif, sta, arg);
+	ath12k_peer_assoc_h_eht(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_qos(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_phymode(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_smps(sta, arg);
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 67604224046b..23cdb3543fc2 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -2583,6 +2583,7 @@  struct ath12k_wmi_soc_hal_reg_caps_params {
 
 #define WMI_MAX_EHTCAP_MAC_SIZE  2
 #define WMI_MAX_EHTCAP_PHY_SIZE  3
+#define WMI_MAX_EHTCAP_RATE_SET  3
 
 /* Used for EHT MCS-NSS array. Data at each array index follows the format given
  * in IEEE P802.11be/D2.0, May 20229.4.2.313.4.
@@ -2596,6 +2597,15 @@  struct ath12k_wmi_soc_hal_reg_caps_params {
 #define WMI_MAX_EHT_SUPP_MCS_2G_SIZE  2
 #define WMI_MAX_EHT_SUPP_MCS_5G_SIZE  4
 
+#define WMI_EHTCAP_TXRX_MCS_NSS_IDX_80    0
+#define WMI_EHTCAP_TXRX_MCS_NSS_IDX_160   1
+#define WMI_EHTCAP_TXRX_MCS_NSS_IDX_320   2
+
+#define WMI_EHT_MCS_NSS_0_7    GENMASK(3, 0)
+#define WMI_EHT_MCS_NSS_8_9    GENMASK(7, 4)
+#define WMI_EHT_MCS_NSS_10_11  GENMASK(11, 8)
+#define WMI_EHT_MCS_NSS_12_13  GENMASK(15, 12)
+
 struct ath12k_wmi_caps_ext_params {
 	__le32 hw_mode_id;
 	union {
@@ -3565,6 +3575,13 @@  struct ath12k_wmi_peer_assoc_arg {
 	bool twt_responder;
 	bool twt_requester;
 	struct ath12k_wmi_ppe_threshold_arg peer_ppet;
+	bool eht_flag;
+	u32 peer_eht_cap_mac[WMI_MAX_EHTCAP_MAC_SIZE];
+	u32 peer_eht_cap_phy[WMI_MAX_EHTCAP_PHY_SIZE];
+	u32 peer_eht_mcs_count;
+	u32 peer_eht_rx_mcs_set[WMI_MAX_EHTCAP_RATE_SET];
+	u32 peer_eht_tx_mcs_set[WMI_MAX_EHTCAP_RATE_SET];
+	struct ath12k_wmi_ppe_threshold_arg peer_eht_ppet;
 };
 
 struct wmi_peer_assoc_complete_cmd {