| Message ID | 20230725142703.157547-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios | expand |
On 25/07/2023 16:27, Krzysztof Kozlowski wrote: > The recommended name for enable GPIOs property in regulator-gpio is > enable-gpios. This is also required by bindings: > > meson-g12b-bananapi-cm4-cm4io.dtb: regulator-vddio-c: Unevaluated properties are not allowed ('enable-gpio' was unexpected) > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi > index 97e522921b06..86adc1423385 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi > @@ -56,7 +56,7 @@ vddio_c: regulator-vddio-c { > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <3300000>; > > - enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; > + enable-gpios = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; > enable-active-high; > regulator-always-on; > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Hi, On Tue, 25 Jul 2023 16:27:03 +0200, Krzysztof Kozlowski wrote: > The recommended name for enable GPIOs property in regulator-gpio is > enable-gpios. This is also required by bindings: > > meson-g12b-bananapi-cm4-cm4io.dtb: regulator-vddio-c: Unevaluated properties are not allowed ('enable-gpio' was unexpected) > > Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.6/arm64-dt) [1/1] arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios https://git.kernel.org/amlogic/c/01457f6fd40b45b6dd394c75317da812bf585a97 These changes has been applied on the intermediate git tree [1]. The v6.6/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers for inclusion in their intermediate git branches in order to be sent to Linus during the next merge window, or sooner if it's a set of fixes. In the cases of fixes, those will be merged in the current release candidate kernel and as soon they appear on the Linux master branch they will be backported to the previous Stable and Long-Stable kernels [2]. The intermediate git branches are merged daily in the linux-next tree [3], people are encouraged testing these pre-release kernels and report issues on the relevant mailing-lists. If problems are discovered on those changes, please submit a signed-off-by revert patch followed by a corrective changeset. [1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git [3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi index 97e522921b06..86adc1423385 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi @@ -56,7 +56,7 @@ vddio_c: regulator-vddio-c { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; + enable-gpios = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on;
The recommended name for enable GPIOs property in regulator-gpio is enable-gpios. This is also required by bindings: meson-g12b-bananapi-cm4-cm4io.dtb: regulator-vddio-c: Unevaluated properties are not allowed ('enable-gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)