| Message ID | 20230731194010.73016-2-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v6,1/2] PCI: dwc: Implement general suspend/resume functionality for L2/L3 transitions | expand |
On Mon, Jul 31, 2023 at 03:40:10PM -0400, Frank Li wrote: > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > > Add PME_Turn_Off/PME_TO_Ack handshake sequence, and finally > put the PCIe controller into D3 state after the L2/L3 ready > state transition process completion. > This commit message is wrong/outdated. Please describe what _this_ patch does. > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > - Change from v5 to v6 > change to NOIRQ_SYSTEM_SLEEP_PM_OPS to remove #ifdef PM_CONFIG > > - Change from v3 to v5 > none > > - change at v3 > Basic rewrite whole patch according rob herry suggestion. > put common function into dwc, so more soc can share the same logic. > > drivers/pci/controller/dwc/pci-layerscape.c | 146 ++++++++++++++++++-- > 1 file changed, 137 insertions(+), 9 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c > index ed5fb492fe084..f235c79600277 100644 > --- a/drivers/pci/controller/dwc/pci-layerscape.c > +++ b/drivers/pci/controller/dwc/pci-layerscape.c > @@ -8,9 +8,11 @@ > * Author: Minghuan Lian <Minghuan.Lian@freescale.com> > */ > > +#include <linux/delay.h> > #include <linux/kernel.h> > #include <linux/interrupt.h> > #include <linux/init.h> > +#include <linux/iopoll.h> > #include <linux/of_pci.h> > #include <linux/of_platform.h> > #include <linux/of_address.h> > @@ -27,12 +29,33 @@ > #define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response Register */ > #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted request */ > > +/* PF Message Command Register */ > +#define LS_PCIE_PF_MCR 0x2c > +#define PF_MCR_PTOMR BIT(0) > +#define PF_MCR_EXL2S BIT(1) > + > #define PCIE_IATU_NUM 6 > > +struct ls_pcie; > + Why do you need foward declaration? > +struct ls_pcie_drvdata { > + const u32 pf_off; > + const u32 lut_off; > + bool pm_support; > +}; > + > struct ls_pcie { > struct dw_pcie *pci; > + const struct ls_pcie_drvdata *drvdata; > + void __iomem *pf_base; > + void __iomem *lut_base; > + bool big_endian; > + bool ep_presence; Where is this variable used? > + struct regmap *scfg; > + int index; > }; > > +#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr) > #define to_ls_pcie(x) dev_get_drvdata((x)->dev) > > static bool ls_pcie_is_bridge(struct ls_pcie *pcie) > @@ -73,6 +96,57 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie) > iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR); > } > > +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off) > +{ > + if (pcie->big_endian) > + return ioread32be(pcie->pf_base + off); > + > + return ioread32(pcie->pf_base + off); > +} > + > +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val) > +{ > + if (pcie->big_endian) > + return iowrite32be(val, pcie->pf_base + off); Return value of this function is marked as void. So you should not return anything. > + > + return iowrite32(val, pcie->pf_base + off); > + > +} > + > +static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp) > +{ > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > + struct ls_pcie *pcie = to_ls_pcie(pci); > + u32 val; > + int ret; > + > + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR); > + val |= PF_MCR_PTOMR; > + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val); > + > + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR, > + val, !(val & PF_MCR_PTOMR), 100, 10000); As I mentioned in previous patch, if you intend to use 1ms, please change the value to 1000. > + if (ret) > + dev_info(pcie->pci->dev, "poll turn off message timeout\n"); dev_err? Same below. > +} > + > +static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp) > +{ > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > + struct ls_pcie *pcie = to_ls_pcie(pci); > + u32 val; > + int ret; > + > + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR); > + val |= PF_MCR_EXL2S; > + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val); > + > + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR, > + val, !(val & PF_MCR_EXL2S), 100, 10000); > + if (ret) > + dev_info(pcie->pci->dev, "poll exit L2 state timeout\n"); Same as above. > +} > + > static int ls_pcie_host_init(struct dw_pcie_rp *pp) > { > struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > @@ -91,18 +165,33 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp) > > static const struct dw_pcie_host_ops ls_pcie_host_ops = { > .host_init = ls_pcie_host_init, > + .pme_turn_off = ls_pcie_send_turnoff_msg, > + .exit_from_l2 = ls_pcie_exit_from_l2, > +}; > + > +static const struct ls_pcie_drvdata ls1021a_drvdata = { > +}; > + > +static const struct ls_pcie_drvdata ls1043a_drvdata = { > + .lut_off = 0x10000, > +}; > + > +static const struct ls_pcie_drvdata layerscape_drvdata = { > + .lut_off = 0x80000, > + .pf_off = 0xc0000, > + .pm_support = true, > }; > > static const struct of_device_id ls_pcie_of_match[] = { > - { .compatible = "fsl,ls1012a-pcie", }, > - { .compatible = "fsl,ls1021a-pcie", }, > - { .compatible = "fsl,ls1028a-pcie", }, > - { .compatible = "fsl,ls1043a-pcie", }, > - { .compatible = "fsl,ls1046a-pcie", }, > - { .compatible = "fsl,ls2080a-pcie", }, > - { .compatible = "fsl,ls2085a-pcie", }, > - { .compatible = "fsl,ls2088a-pcie", }, > - { .compatible = "fsl,ls1088a-pcie", }, > + { .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata }, > + { .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata }, > + { .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata }, > + { .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata }, > + { .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata }, > + { .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata }, > + { .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata }, > + { .compatible = "fsl,ls2088a-pcie", .data = &layerscape_drvdata }, > + { .compatible = "fsl,ls1088a-pcie", .data = &layerscape_drvdata }, > { }, > }; > > @@ -121,6 +210,8 @@ static int ls_pcie_probe(struct platform_device *pdev) > if (!pci) > return -ENOMEM; > > + pcie->drvdata = of_device_get_match_data(dev); > + > pci->dev = dev; > pci->pp.ops = &ls_pcie_host_ops; > > @@ -131,6 +222,14 @@ static int ls_pcie_probe(struct platform_device *pdev) > if (IS_ERR(pci->dbi_base)) > return PTR_ERR(pci->dbi_base); > > + pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian"); > + > + if (pcie->drvdata->lut_off) > + pcie->lut_base = pci->dbi_base + pcie->drvdata->lut_off; Where is lut_base being used? > + > + if (pcie->drvdata->pf_off) No need of this check. In the absence of "pf_off", pf_base is going to be 0 which is anyway wrong if used. So just use "pf_off" directly. If you really need the check, then you should use "pm_support" as below: if (pcie->drvdata->pm_support) pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off; This makes it clear that "pf_base" is only used if pm_support is enabled. > + pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off; > + > if (!ls_pcie_is_bridge(pcie)) > return -ENODEV; > > @@ -139,12 +238,41 @@ static int ls_pcie_probe(struct platform_device *pdev) > return dw_pcie_host_init(&pci->pp); > } > > +static int ls_pcie_suspend_noirq(struct device *dev) > +{ > + struct ls_pcie *pcie = dev_get_drvdata(dev); > + struct dw_pcie *pci = pcie->pci; > + > + if (!pcie->drvdata->pm_support) > + return 0; > + > + return dw_pcie_suspend_noirq(pci); > +} > + > +static int ls_pcie_resume_noirq(struct device *dev) > +{ > + Remove newline. - Mani > + struct ls_pcie *pcie = dev_get_drvdata(dev); > + struct dw_pcie *pci = pcie->pci; > + > + if (!pcie->drvdata->pm_support) > + return 0; > + > + return dw_pcie_resume_noirq(pci); > +} > + > +static const struct dev_pm_ops ls_pcie_pm_ops = { > + NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq, > + ls_pcie_resume_noirq) > +}; > + > static struct platform_driver ls_pcie_driver = { > .probe = ls_pcie_probe, > .driver = { > .name = "layerscape-pcie", > .of_match_table = ls_pcie_of_match, > .suppress_bind_attrs = true, > + .pm = &ls_pcie_pm_ops, > }, > }; > builtin_platform_driver(ls_pcie_driver); > -- > 2.34.1 >
diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c index ed5fb492fe084..f235c79600277 100644 --- a/drivers/pci/controller/dwc/pci-layerscape.c +++ b/drivers/pci/controller/dwc/pci-layerscape.c @@ -8,9 +8,11 @@ * Author: Minghuan Lian <Minghuan.Lian@freescale.com> */ +#include <linux/delay.h> #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/init.h> +#include <linux/iopoll.h> #include <linux/of_pci.h> #include <linux/of_platform.h> #include <linux/of_address.h> @@ -27,12 +29,33 @@ #define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response Register */ #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted request */ +/* PF Message Command Register */ +#define LS_PCIE_PF_MCR 0x2c +#define PF_MCR_PTOMR BIT(0) +#define PF_MCR_EXL2S BIT(1) + #define PCIE_IATU_NUM 6 +struct ls_pcie; + +struct ls_pcie_drvdata { + const u32 pf_off; + const u32 lut_off; + bool pm_support; +}; + struct ls_pcie { struct dw_pcie *pci; + const struct ls_pcie_drvdata *drvdata; + void __iomem *pf_base; + void __iomem *lut_base; + bool big_endian; + bool ep_presence; + struct regmap *scfg; + int index; }; +#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr) #define to_ls_pcie(x) dev_get_drvdata((x)->dev) static bool ls_pcie_is_bridge(struct ls_pcie *pcie) @@ -73,6 +96,57 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie) iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR); } +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off) +{ + if (pcie->big_endian) + return ioread32be(pcie->pf_base + off); + + return ioread32(pcie->pf_base + off); +} + +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val) +{ + if (pcie->big_endian) + return iowrite32be(val, pcie->pf_base + off); + + return iowrite32(val, pcie->pf_base + off); + +} + +static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct ls_pcie *pcie = to_ls_pcie(pci); + u32 val; + int ret; + + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR); + val |= PF_MCR_PTOMR; + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val); + + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR, + val, !(val & PF_MCR_PTOMR), 100, 10000); + if (ret) + dev_info(pcie->pci->dev, "poll turn off message timeout\n"); +} + +static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct ls_pcie *pcie = to_ls_pcie(pci); + u32 val; + int ret; + + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR); + val |= PF_MCR_EXL2S; + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val); + + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR, + val, !(val & PF_MCR_EXL2S), 100, 10000); + if (ret) + dev_info(pcie->pci->dev, "poll exit L2 state timeout\n"); +} + static int ls_pcie_host_init(struct dw_pcie_rp *pp) { struct dw_pcie *pci = to_dw_pcie_from_pp(pp); @@ -91,18 +165,33 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp) static const struct dw_pcie_host_ops ls_pcie_host_ops = { .host_init = ls_pcie_host_init, + .pme_turn_off = ls_pcie_send_turnoff_msg, + .exit_from_l2 = ls_pcie_exit_from_l2, +}; + +static const struct ls_pcie_drvdata ls1021a_drvdata = { +}; + +static const struct ls_pcie_drvdata ls1043a_drvdata = { + .lut_off = 0x10000, +}; + +static const struct ls_pcie_drvdata layerscape_drvdata = { + .lut_off = 0x80000, + .pf_off = 0xc0000, + .pm_support = true, }; static const struct of_device_id ls_pcie_of_match[] = { - { .compatible = "fsl,ls1012a-pcie", }, - { .compatible = "fsl,ls1021a-pcie", }, - { .compatible = "fsl,ls1028a-pcie", }, - { .compatible = "fsl,ls1043a-pcie", }, - { .compatible = "fsl,ls1046a-pcie", }, - { .compatible = "fsl,ls2080a-pcie", }, - { .compatible = "fsl,ls2085a-pcie", }, - { .compatible = "fsl,ls2088a-pcie", }, - { .compatible = "fsl,ls1088a-pcie", }, + { .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata }, + { .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata }, + { .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata }, + { .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata }, + { .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata }, + { .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata }, + { .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata }, + { .compatible = "fsl,ls2088a-pcie", .data = &layerscape_drvdata }, + { .compatible = "fsl,ls1088a-pcie", .data = &layerscape_drvdata }, { }, }; @@ -121,6 +210,8 @@ static int ls_pcie_probe(struct platform_device *pdev) if (!pci) return -ENOMEM; + pcie->drvdata = of_device_get_match_data(dev); + pci->dev = dev; pci->pp.ops = &ls_pcie_host_ops; @@ -131,6 +222,14 @@ static int ls_pcie_probe(struct platform_device *pdev) if (IS_ERR(pci->dbi_base)) return PTR_ERR(pci->dbi_base); + pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian"); + + if (pcie->drvdata->lut_off) + pcie->lut_base = pci->dbi_base + pcie->drvdata->lut_off; + + if (pcie->drvdata->pf_off) + pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off; + if (!ls_pcie_is_bridge(pcie)) return -ENODEV; @@ -139,12 +238,41 @@ static int ls_pcie_probe(struct platform_device *pdev) return dw_pcie_host_init(&pci->pp); } +static int ls_pcie_suspend_noirq(struct device *dev) +{ + struct ls_pcie *pcie = dev_get_drvdata(dev); + struct dw_pcie *pci = pcie->pci; + + if (!pcie->drvdata->pm_support) + return 0; + + return dw_pcie_suspend_noirq(pci); +} + +static int ls_pcie_resume_noirq(struct device *dev) +{ + + struct ls_pcie *pcie = dev_get_drvdata(dev); + struct dw_pcie *pci = pcie->pci; + + if (!pcie->drvdata->pm_support) + return 0; + + return dw_pcie_resume_noirq(pci); +} + +static const struct dev_pm_ops ls_pcie_pm_ops = { + NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq, + ls_pcie_resume_noirq) +}; + static struct platform_driver ls_pcie_driver = { .probe = ls_pcie_probe, .driver = { .name = "layerscape-pcie", .of_match_table = ls_pcie_of_match, .suppress_bind_attrs = true, + .pm = &ls_pcie_pm_ops, }, }; builtin_platform_driver(ls_pcie_driver);