diff mbox series

[v7,2/2] ARM: dts: aspeed: yosemitev4: add Facebook Yosemite 4 BMC

Message ID 20230808084248.1415678-3-Delphine_CC_Chiu@wiwynn.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: Facebook Yosemite 4 platform | expand

Commit Message

Delphine CC Chiu Aug. 8, 2023, 8:42 a.m. UTC
Add linux device tree entry related to
Yosemite 4 specific devices connected to BMC SoC.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
Changelog:
v7 - Revise changelog format
v6 - Change project name from yosemitev4 to yosemite4
v5 - Revise rtc setting
   - Remove duplicated multi-master setting
v3 - Revise the bootargs to stdout-path
   - Revise i2c devices
v2 - Revise the DTS node name
---
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 633 ++++++++++++++++++
 2 files changed, 634 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

Comments

Krzysztof Kozlowski Aug. 8, 2023, 8:53 a.m. UTC | #1
On 08/08/2023 10:42, Delphine CC Chiu wrote:
> Add linux device tree entry related to
> Yosemite 4 specific devices connected to BMC SoC.
> 
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Joel Stanley Aug. 9, 2023, 8:05 a.m. UTC | #2
On Tue, 8 Aug 2023 at 08:43, Delphine CC Chiu
<Delphine_CC_Chiu@wiwynn.com> wrote:
>
> Add linux device tree entry related to
> Yosemite 4 specific devices connected to BMC SoC.

Convention is to mention what kind of machine this is, to give us some
context for review. "This is an x86 server" or similar. Take a look at
existing aspeed device tree commits for inspiration.

> +&mac2 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_rmii3_default>;
> +       no-hw-checksum;
> +       use-ncsi;
> +       mlx,multi-host;
> +       ncsi-ctrl,start-redo-probe;
> +       ncsi-ctrl,no-channel-monitor;
> +       ncsi-package = <1>;
> +       ncsi-channel = <1>;
> +       ncsi-rexmit = <1>;
> +       ncsi-timeout = <2>;

None of these are properties that mainline Linux supports. Do you plan
on sending patches for these?

> +};
> +
> +&mac3 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_rmii4_default>;
> +       no-hw-checksum;
> +       use-ncsi;
> +       mlx,multi-host;
> +       ncsi-ctrl,start-redo-probe;
> +       ncsi-ctrl,no-channel-monitor;
> +       ncsi-package = <1>;
> +       ncsi-channel = <1>;
> +       ncsi-rexmit = <1>;
> +       ncsi-timeout = <2>;
> +};
Joel Stanley Aug. 9, 2023, 8:12 a.m. UTC | #3
On Wed, 9 Aug 2023 at 08:05, Joel Stanley <joel@jms.id.au> wrote:
>
> On Tue, 8 Aug 2023 at 08:43, Delphine CC Chiu
> <Delphine_CC_Chiu@wiwynn.com> wrote:
> >
> > Add linux device tree entry related to
> > Yosemite 4 specific devices connected to BMC SoC.

There were also some of these annoying warnings. Please try to fix
them up in your next version:

../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:460.4-14:
Warning (reg_format):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@71/i2c@0:reg: property has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:510.4-14:
Warning (reg_format):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@71/i2c@1:reg: property has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:567.4-14:
Warning (reg_format):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@73/i2c@0:reg: property has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:578.4-14:
Warning (reg_format):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@73/i2c@1:reg: property has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: Warning
(pci_device_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: Warning
(pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: Warning
(i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: Warning
(spi_bus_reg): Failed prerequisite 'reg_format'
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:457.9-505.5:
Warning (avoid_default_addr_size):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@71/i2c@0: Relying on default
#address-cells value
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:457.9-505.5:
Warning (avoid_default_addr_size):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@71/i2c@0: Relying on default
#size-cells value
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:507.9-555.5:
Warning (avoid_default_addr_size):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@71/i2c@1: Relying on default
#address-cells value
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:507.9-555.5:
Warning (avoid_default_addr_size):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@71/i2c@1: Relying on default
#size-cells value
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:564.9-573.5:
Warning (avoid_default_addr_size):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@73/i2c@0: Relying on default
#address-cells value
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:564.9-573.5:
Warning (avoid_default_addr_size):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@73/i2c@0: Relying on default
#size-cells value
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:575.9-584.5:
Warning (avoid_default_addr_size):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@73/i2c@1: Relying on default
#address-cells value
../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:575.9-584.5:
Warning (avoid_default_addr_size):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@73/i2c@1: Relying on default
#size-cells value
Joel Stanley Aug. 9, 2023, 8:15 a.m. UTC | #4
On Wed, 9 Aug 2023 at 08:12, Joel Stanley <joel@jms.id.au> wrote:
>
> On Wed, 9 Aug 2023 at 08:05, Joel Stanley <joel@jms.id.au> wrote:
> >
> > On Tue, 8 Aug 2023 at 08:43, Delphine CC Chiu
> > <Delphine_CC_Chiu@wiwynn.com> wrote:
> > >
> > > Add linux device tree entry related to
> > > Yosemite 4 specific devices connected to BMC SoC.
>
> There were also some of these annoying warnings. Please try to fix
> them up in your next version:
>
> ../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:460.4-14:
> Warning (reg_format):
> /ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@71/i2c@0:reg: property has
> invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)@@ -450,6 +450,9 @@ eeprom@51 {

This silenced most of them:

        i2c-mux@71 {
                compatible = "nxp,pca9846";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
                idle-state = <0>;
                i2c-mux-idle-disconnect;
                reg = <0x71>;
@@ -557,6 +560,9 @@ gpio@61 {

        i2c-mux@73 {
                compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
                idle-state = <0>;
                i2c-mux-idle-disconnect;
                reg = <0x73>;

And then this fixed the remaining one:

@@ -423,7 +423,7 @@ power-sensor@42 {
                reg = <0x42>;
        };

-       power-sensor@41 {
+       power-sensor@43 {
                compatible = "ti,ina230";
                reg = <0x43>;
        };


Please fold in these changes in your next version.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index c68984322a86..5b9264b823f3 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -26,6 +26,7 @@  dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-wedge400.dtb \
 	aspeed-bmc-facebook-yamp.dtb \
 	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-facebook-yosemite4.dtb \
 	aspeed-bmc-ibm-bonnell.dtb \
 	aspeed-bmc-ibm-everest.dtb \
 	aspeed-bmc-ibm-rainier.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
new file mode 100644
index 000000000000..0791dea588b2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -0,0 +1,633 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 4 BMC";
+	compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mlx,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mlx,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x70>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x71>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	bus-frequency = <400000>;
+};
+
+&i2c11 {
+	status = "okay";
+	bus-frequency = <400000>;
+	power-sensor@10 {
+		compatible = "adi, adm1272";
+		reg = <0x10>;
+	};
+
+	power-sensor@12 {
+		compatible = "adi, adm1272";
+		reg = <0x12>;
+	};
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c256";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	bus-frequency = <400000>;
+};
+
+&i2c14 {
+	status = "okay";
+	bus-frequency = <400000>;
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <2>;
+	};
+
+	adc@35 {
+		compatible = "ti,adc128d818";
+		reg = <0x35>;
+		ti,mode = /bits/ 8 <2>;
+	};
+
+	adc@37 {
+		compatible = "ti,adc128d818";
+		reg = <0x37>;
+		ti,mode = /bits/ 8 <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+	};
+
+	temperature-sensor@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9846";
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x71>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <2>;
+			};
+
+			pwm@20{
+				compatible = "max31790";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			gpio@22{
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+			};
+
+			pwm@23{
+				compatible = "max31790";
+				reg = <0x23>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <2>;
+			};
+
+			pwm@20{
+				compatible = "max31790";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			gpio@22{
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+			};
+
+			pwm@23{
+				compatible = "max31790";
+				reg = <0x23>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x73>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	mctp-controller;
+	multi-master;
+	bus-frequency = <400000>;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		idle-state = <0>;
+		i2c-mux-idle-disconnect;
+		reg = <0x72>;
+	};
+};
+
+&adc0 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};