| Message ID | 20230726162615.1270075-1-devarsht@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: media: Add bindings for Imagination E5010 JPEG Encoder driver | expand |
On 26/07/2023 18:26, Devarsh Thakkar wrote: > Add dt-bindings for Imagination E5010 JPEG Encoder driver which is > implemented as stateful V4L2 M2M driver. > > Co-developed-by: David Huang <d-huang@ti.com> > Signed-off-by: David Huang <d-huang@ti.com> A nit, subject: drop second/last, redundant "bindings for". The "dt-bindings" prefix is already stating that these are bindings. Drop also "driver". Bindings are for hardware, not drivers. Prefix starts with media and then dt-bindings. > Signed-off-by: Devarsh Thakkar <devarsht@ti.com> > --- > .../bindings/media/img,e5010-jpeg-enc.yaml | 79 +++++++++++++++++++ > MAINTAINERS | 5 ++ > 2 files changed, 84 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml > > diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml > new file mode 100644 > index 000000000000..0060373eace7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml > @@ -0,0 +1,79 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Imagination E5010 JPEG Encoder > + > +maintainers: > + - Devarsh Thakkar <devarsht@ti.com> > + > +description: | > + The E5010 is a JPEG encoder from Imagination Technologies implemented on > + TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422 > + inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to > + 8Kx8K resolution. > + > +properties: > + compatible: > + const: img,e5010-jpeg-enc Your description suggests that this is part of TI SoC. Pretty often licensed blocks cannot be used on their own and need some customizations. Are you sure your block does not need any customization thus no dedicated compatible is needed? > + > + reg: > + items: > + - description: The E5010 main register region > + - description: The E5010 mmu register region > + > + reg-names: > + items: > + - const: regjasper > + - const: regmmu > + Drop reg from both > + power-domains: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 2 You need to specify the items. Also, no variable number of clocks. Why would they vary if block is strictly defined? > + > + clock-names: > + minItems: 1 > + maxItems: 2 Instead list the names. > + > + interrupts: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - reg-names > + - interrupts > + - clocks > + - clock-names > + - power-domains > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + cbass_main { That's some weird name. Probably you meant soc. Anyway, underscores are not allowed. > + #address-cells = <2>; > + #size-cells = <2>; > + e5010: e5010@fd20000 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation Drop the label. > + compatible = "img,e5010-jpeg-enc"; > + reg = <0x00 0xfd20000 0x00 0x100>, > + <0x00 0xfd20200 0x00 0x200>; > + reg-names = "regjasper", "regmmu"; > + clocks = <&k3_clks 201 0>; > + clock-names = "core_clk"; > + power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>; > + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; > + }; > + }; Best regards, Krzysztof
Le mercredi 26 juillet 2023 à 18:33 +0200, Krzysztof Kozlowski a écrit : > On 26/07/2023 18:26, Devarsh Thakkar wrote: > > Add dt-bindings for Imagination E5010 JPEG Encoder driver which is > > implemented as stateful V4L2 M2M driver. > > > > Co-developed-by: David Huang <d-huang@ti.com> > > Signed-off-by: David Huang <d-huang@ti.com> > > A nit, subject: drop second/last, redundant "bindings for". The > "dt-bindings" prefix is already stating that these are bindings. > > Drop also "driver". Bindings are for hardware, not drivers. > > Prefix starts with media and then dt-bindings. That being said, I haven't seen any submission for the driver using these, is it common practice to upstream bindings for unsupported hardware ? Nicolas > > > > Signed-off-by: Devarsh Thakkar <devarsht@ti.com> > > --- > > .../bindings/media/img,e5010-jpeg-enc.yaml | 79 +++++++++++++++++++ > > MAINTAINERS | 5 ++ > > 2 files changed, 84 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml > > new file mode 100644 > > index 000000000000..0060373eace7 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml > > @@ -0,0 +1,79 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Imagination E5010 JPEG Encoder > > + > > +maintainers: > > + - Devarsh Thakkar <devarsht@ti.com> > > + > > +description: | > > + The E5010 is a JPEG encoder from Imagination Technologies implemented on > > + TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422 > > + inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to > > + 8Kx8K resolution. > > + > > +properties: > > + compatible: > > + const: img,e5010-jpeg-enc > > Your description suggests that this is part of TI SoC. Pretty often > licensed blocks cannot be used on their own and need some > customizations. Are you sure your block does not need any customization > thus no dedicated compatible is needed? > > > + > > + reg: > > + items: > > + - description: The E5010 main register region > > + - description: The E5010 mmu register region > > + > > + reg-names: > > + items: > > + - const: regjasper > > + - const: regmmu > > + > > Drop reg from both > > > + power-domains: > > + maxItems: 1 > > + > > + resets: > > + maxItems: 1 > > + > > + clocks: > > + minItems: 1 > > + maxItems: 2 > > You need to specify the items. Also, no variable number of clocks. Why > would they vary if block is strictly defined? > > > + > > + clock-names: > > + minItems: 1 > > + maxItems: 2 > > Instead list the names. > > > + > > + interrupts: > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + - reg-names > > + - interrupts > > + - clocks > > + - clock-names > > + - power-domains > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + > > + cbass_main { > > That's some weird name. Probably you meant soc. Anyway, underscores are > not allowed. > > > + #address-cells = <2>; > > + #size-cells = <2>; > > + e5010: e5010@fd20000 { > > Node names should be generic. See also an explanation and list of > examples (not exhaustive) in DT specification: > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > > Drop the label. > > > + compatible = "img,e5010-jpeg-enc"; > > + reg = <0x00 0xfd20000 0x00 0x100>, > > + <0x00 0xfd20200 0x00 0x200>; > > + reg-names = "regjasper", "regmmu"; > > + clocks = <&k3_clks 201 0>; > > + clock-names = "core_clk"; > > + power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>; > > + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + }; > > > Best regards, > Krzysztof >
On 26/07/2023 22:35, Nicolas Dufresne wrote: > Le mercredi 26 juillet 2023 à 18:33 +0200, Krzysztof Kozlowski a écrit : >> On 26/07/2023 18:26, Devarsh Thakkar wrote: >>> Add dt-bindings for Imagination E5010 JPEG Encoder driver which is >>> implemented as stateful V4L2 M2M driver. >>> >>> Co-developed-by: David Huang <d-huang@ti.com> >>> Signed-off-by: David Huang <d-huang@ti.com> >> >> A nit, subject: drop second/last, redundant "bindings for". The >> "dt-bindings" prefix is already stating that these are bindings. >> >> Drop also "driver". Bindings are for hardware, not drivers. >> >> Prefix starts with media and then dt-bindings. > > That being said, I haven't seen any submission for the driver using these, is it > common practice to upstream bindings for unsupported hardware ? I assumed I wasn't CC'ed on the user, but it seems there is no user. None, neither drivers, not DTS. Commit msg also doesn't explain it. No point op submit bindings where there are no users. Best regards, Krzysztof
Hi Krzysztof, Thanks for the quick review. On 26/07/23 22:03, Krzysztof Kozlowski wrote: > On 26/07/2023 18:26, Devarsh Thakkar wrote: >> Add dt-bindings for Imagination E5010 JPEG Encoder driver which is >> implemented as stateful V4L2 M2M driver. >> >> Co-developed-by: David Huang <d-huang@ti.com> >> Signed-off-by: David Huang <d-huang@ti.com> > > A nit, subject: drop second/last, redundant "bindings for". The > "dt-bindings" prefix is already stating that these are bindings. > > Drop also "driver". Bindings are for hardware, not drivers. > > Prefix starts with media and then dt-bindings. > Agreed. > >> Signed-off-by: Devarsh Thakkar <devarsht@ti.com> >> --- >> .../bindings/media/img,e5010-jpeg-enc.yaml | 79 +++++++++++++++++++ >> MAINTAINERS | 5 ++ >> 2 files changed, 84 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml >> >> diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml >> new file mode 100644 >> index 000000000000..0060373eace7 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml >> @@ -0,0 +1,79 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Imagination E5010 JPEG Encoder >> + >> +maintainers: >> + - Devarsh Thakkar <devarsht@ti.com> >> + >> +description: | >> + The E5010 is a JPEG encoder from Imagination Technologies implemented on >> + TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422 >> + inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to >> + 8Kx8K resolution. >> + >> +properties: >> + compatible: >> + const: img,e5010-jpeg-enc > > Your description suggests that this is part of TI SoC. Pretty often > licensed blocks cannot be used on their own and need some > customizations. Are you sure your block does not need any customization > thus no dedicated compatible is needed? > There is a wrapper for interfacing this core with TI SoC, I will recheck this interfacing but I believe nothing changes from programming perspective as there is 1-to-1 maintained between the clocks and signals w.r.t actual E5010 core. >> + >> + reg: >> + items: >> + - description: The E5010 main register region >> + - description: The E5010 mmu register region >> + >> + reg-names: >> + items: >> + - const: regjasper >> + - const: regmmu >> + > > Drop reg from both > Agreed. >> + power-domains: >> + maxItems: 1 >> + >> + resets: >> + maxItems: 1 >> + >> + clocks: >> + minItems: 1 >> + maxItems: 2 > > You need to specify the items. Also, no variable number of clocks. Why > would they vary if block is strictly defined? > Agreed, I believe this version of E5010 core only supports single clock, so we can get rid of maxItems: 2. >> + >> + clock-names: >> + minItems: 1 >> + maxItems: 2 > > Instead list the names. > Agreed. >> + >> + interrupts: >> + maxItems: 1 >> + >> +required: >> + - compatible >> + - reg >> + - reg-names >> + - interrupts >> + - clocks >> + - clock-names >> + - power-domains >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/soc/ti,sci_pm_domain.h> >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + #include <dt-bindings/interrupt-controller/irq.h> >> + >> + cbass_main { > > That's some weird name. Probably you meant soc. Anyway, underscores are > not allowed. Yes, I think I can put soc. cbass_main is specific to TI (soc interconnect bus). > >> + #address-cells = <2>; >> + #size-cells = <2>; >> + e5010: e5010@fd20000 { > > Node names should be generic. See also an explanation and list of > examples (not exhaustive) in DT specification: > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > Yes, video-codec is the nearest one, but this is not really a codec as it only supports encoding, is it fine to name node as jpeg-enc ? > > Drop the label. > Agreed. Best Regards, Devarsh >> + compatible = "img,e5010-jpeg-enc"; >> + reg = <0x00 0xfd20000 0x00 0x100>, >> + <0x00 0xfd20200 0x00 0x200>; >> + reg-names = "regjasper", "regmmu"; >> + clocks = <&k3_clks 201 0>; >> + clock-names = "core_clk"; >> + power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>; >> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> + }; > > > Best regards, > Krzysztof >
Hi Krzysztof, On 27/07/23 19:58, Devarsh Thakkar wrote: > Hi Krzysztof, > > Thanks for the quick review. > > On 26/07/23 22:03, Krzysztof Kozlowski wrote: >> On 26/07/2023 18:26, Devarsh Thakkar wrote: >>> Add dt-bindings for Imagination E5010 JPEG Encoder driver which is >>> implemented as stateful V4L2 M2M driver. >>> >>> Co-developed-by: David Huang <d-huang@ti.com> >>> Signed-off-by: David Huang <d-huang@ti.com> >> >> A nit, subject: drop second/last, redundant "bindings for". The >> "dt-bindings" prefix is already stating that these are bindings. >> >> Drop also "driver". Bindings are for hardware, not drivers. >> >> Prefix starts with media and then dt-bindings. >> > > Agreed. >> >>> Signed-off-by: Devarsh Thakkar <devarsht@ti.com> >>> --- >>> .../bindings/media/img,e5010-jpeg-enc.yaml | 79 +++++++++++++++++++ >>> MAINTAINERS | 5 ++ >>> 2 files changed, 84 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml >>> >>> diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml >>> new file mode 100644 >>> index 000000000000..0060373eace7 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml >>> @@ -0,0 +1,79 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: Imagination E5010 JPEG Encoder >>> + >>> +maintainers: >>> + - Devarsh Thakkar <devarsht@ti.com> >>> + >>> +description: | >>> + The E5010 is a JPEG encoder from Imagination Technologies implemented on >>> + TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422 >>> + inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to >>> + 8Kx8K resolution. >>> + >>> +properties: >>> + compatible: >>> + const: img,e5010-jpeg-enc >> >> Your description suggests that this is part of TI SoC. Pretty often >> licensed blocks cannot be used on their own and need some >> customizations. Are you sure your block does not need any customization >> thus no dedicated compatible is needed? >> > > There is a wrapper for interfacing this core with TI SoC, I will recheck this > interfacing but I believe nothing changes from programming perspective as > there is 1-to-1 maintained between the clocks and signals w.r.t actual E5010 > core. > Just to add to above, on a second thought we think it would be better to still have a separate compatible for TI as you suggested (since we have a wrapper) so that it allows any customization needed for future. So compatible enum would look like : oneOf: - items: - const: ti,e5010-jpeg-enc - const: img,e5010-jpeg-enc - const: img,e5010-jpeg-enc Thanks for the suggestion. Regards Devarsh >>> + >>> + reg: >>> + items: >>> + - description: The E5010 main register region >>> + - description: The E5010 mmu register region >>> + >>> + reg-names: >>> + items: >>> + - const: regjasper >>> + - const: regmmu >>> + >> >> Drop reg from both >> > > Agreed. > >>> + power-domains: >>> + maxItems: 1 >>> + >>> + resets: >>> + maxItems: 1 >>> + >>> + clocks: >>> + minItems: 1 >>> + maxItems: 2 >> >> You need to specify the items. Also, no variable number of clocks. Why >> would they vary if block is strictly defined? >> > > Agreed, I believe this version of E5010 core only supports single clock, so we > can get rid of maxItems: 2. > >>> + >>> + clock-names: >>> + minItems: 1 >>> + maxItems: 2 >> >> Instead list the names. >> > > Agreed. > >>> + >>> + interrupts: >>> + maxItems: 1 >>> + >>> +required: >>> + - compatible >>> + - reg >>> + - reg-names >>> + - interrupts >>> + - clocks >>> + - clock-names >>> + - power-domains >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + #include <dt-bindings/soc/ti,sci_pm_domain.h> >>> + #include <dt-bindings/interrupt-controller/arm-gic.h> >>> + #include <dt-bindings/interrupt-controller/irq.h> >>> + >>> + cbass_main { >> >> That's some weird name. Probably you meant soc. Anyway, underscores are >> not allowed. > > Yes, I think I can put soc. cbass_main is specific to TI (soc interconnect bus). > >> >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + e5010: e5010@fd20000 { >> >> Node names should be generic. See also an explanation and list of >> examples (not exhaustive) in DT specification: >> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation >> > > Yes, video-codec is the nearest one, but this is not really a codec as it only > supports encoding, is it fine to name node as jpeg-enc ? > >> >> Drop the label. >> > > Agreed. > > Best Regards, > Devarsh > >>> + compatible = "img,e5010-jpeg-enc"; >>> + reg = <0x00 0xfd20000 0x00 0x100>, >>> + <0x00 0xfd20200 0x00 0x200>; >>> + reg-names = "regjasper", "regmmu"; >>> + clocks = <&k3_clks 201 0>; >>> + clock-names = "core_clk"; >>> + power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>; >>> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + }; >> >> >> Best regards, >> Krzysztof >>
On 08/08/2023 12:20, Devarsh Thakkar wrote: >>>> +properties: >>>> + compatible: >>>> + const: img,e5010-jpeg-enc >>> >>> Your description suggests that this is part of TI SoC. Pretty often >>> licensed blocks cannot be used on their own and need some >>> customizations. Are you sure your block does not need any customization >>> thus no dedicated compatible is needed? >>> >> >> There is a wrapper for interfacing this core with TI SoC, I will recheck this >> interfacing but I believe nothing changes from programming perspective as >> there is 1-to-1 maintained between the clocks and signals w.r.t actual E5010 >> core. >> > > Just to add to above, on a second thought we think it would be better to > still have a separate compatible for TI as you suggested (since we have a > wrapper) so that it allows any customization needed for future. So compatible > enum would look like : > > oneOf: > - items: > - const: ti,e5010-jpeg-enc > - const: img,e5010-jpeg-enc > - const: img,e5010-jpeg-enc > > Thanks for the suggestion. Yeah, it's fine, assuming block can be used as img,e5010-jpeg-enc on its own. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml new file mode 100644 index 000000000000..0060373eace7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagination E5010 JPEG Encoder + +maintainers: + - Devarsh Thakkar <devarsht@ti.com> + +description: | + The E5010 is a JPEG encoder from Imagination Technologies implemented on + TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422 + inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to + 8Kx8K resolution. + +properties: + compatible: + const: img,e5010-jpeg-enc + + reg: + items: + - description: The E5010 main register region + - description: The E5010 mmu register region + + reg-names: + items: + - const: regjasper + - const: regmmu + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + cbass_main { + #address-cells = <2>; + #size-cells = <2>; + e5010: e5010@fd20000 { + compatible = "img,e5010-jpeg-enc"; + reg = <0x00 0xfd20000 0x00 0x100>, + <0x00 0xfd20200 0x00 0x200>; + reg-names = "regjasper", "regmmu"; + clocks = <&k3_clks 201 0>; + clock-names = "core_clk"; + power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index a5c16bb92fe2..aab11219810f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10170,6 +10170,11 @@ S: Maintained F: Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml F: drivers/auxdisplay/img-ascii-lcd.c +IMGTEC JPEG ENCODER DRIVER +M: Devarsh Thakkar <devarsht@ti.com> +S: Supported +F: Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml + IMGTEC IR DECODER DRIVER S: Orphan F: drivers/media/rc/img-ir/