| Message ID | 20230809020902.1941471-1-shaojijie@huawei.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 5e3d20617b055e725e785e0058426368269949f3 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net] net: hns3: fix strscpy causing content truncation issue | expand |
On Wed, Aug 09, 2023 at 10:09:02AM +0800, Jijie Shao wrote: > From: Hao Chen <chenhao418@huawei.com> > > hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some > items to a string for content, and we add '\n' and '\0' in the last > two bytes of content. > > strscpy() will add '\0' in the last byte of destination buffer(one of > items), it result in finishing content print ahead of schedule and some > dump content truncation. > > One Error log shows as below: > cat mac_list/uc > UC MAC_LIST: > > Expected: > UC MAC_LIST: > FUNC_ID MAC_ADDR STATE > pf 00:2b:19:05:03:00 ACTIVE > > The destination buffer is length-bounded and not required to be > NUL-terminated, so just change strscpy() to memcpy() to fix it. I think that you should change to strtomem() and not use plain memcpy(). Thanks
on 2023/8/9 15:03, Leon Romanovsky wrote: > On Wed, Aug 09, 2023 at 10:09:02AM +0800, Jijie Shao wrote: >> From: Hao Chen <chenhao418@huawei.com> >> >> hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some >> items to a string for content, and we add '\n' and '\0' in the last >> two bytes of content. >> >> strscpy() will add '\0' in the last byte of destination buffer(one of >> items), it result in finishing content print ahead of schedule and some >> dump content truncation. >> >> One Error log shows as below: >> cat mac_list/uc >> UC MAC_LIST: >> >> Expected: >> UC MAC_LIST: >> FUNC_ID MAC_ADDR STATE >> pf 00:2b:19:05:03:00 ACTIVE >> >> The destination buffer is length-bounded and not required to be >> NUL-terminated, so just change strscpy() to memcpy() to fix it. > I think that you should change to strtomem() and not use plain memcpy(). > > Thanks Hi: We tried to replace memcpy with strtomem, but errors was reported during compilation: /kernel/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function ‘hclge_dbg_fill_content.part.0’: /kernel/include/linux/compiler_types.h:397:38: error: call to ‘__compiletime_assert_519’ declared with attribute error: BUILD_BUG_ON failed: !__builtin_constant_p(_dest_len) || _dest_len == (size_t)-1 397 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^ /kernel/include/linux/compiler_types.h:378:4: note: in definition of macro ‘__compiletime_assert’ 378 | prefix ## suffix(); \ | ^~~~~~ /kernel/include/linux/compiler_types.h:397:2: note: in expansion of macro ‘_compiletime_assert’ 397 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^~~~~~~~~~~~~~~~~~~ /kernel/include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’ 39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) | ^~~~~~~~~~~~~~~~~~ /kernel/include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’ 50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) | ^~~~~~~~~~~~~~~~ /kernel/include/linux/string.h:302:2: note: in expansion of macro ‘BUILD_BUG_ON’ 302 | BUILD_BUG_ON(!__builtin_constant_p(_dest_len) || \ | ^~~~~~~~~~~~ /kernel/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:115:4: note: in expansion of macro ‘strtomem’ 115 | strtomem(pos, result[i]); | ^~~~~~~~ In the strtomem macro, __builtin_object_size is used to calculate the _dest_len. We tried to print the _dest_len directly, and the result was -1. How can we solve this? Regards Jijie Shao
On Thu, 10 Aug 2023 15:45:50 +0800 Jijie Shao wrote: > on 2023/8/9 15:03, Leon Romanovsky wrote: > > On Wed, Aug 09, 2023 at 10:09:02AM +0800, Jijie Shao wrote: > >> From: Hao Chen <chenhao418@huawei.com> > >> > >> hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some > >> items to a string for content, and we add '\n' and '\0' in the last > >> two bytes of content. > >> > >> strscpy() will add '\0' in the last byte of destination buffer(one of > >> items), it result in finishing content print ahead of schedule and some > >> dump content truncation. > >> > >> One Error log shows as below: > >> cat mac_list/uc > >> UC MAC_LIST: > >> > >> Expected: > >> UC MAC_LIST: > >> FUNC_ID MAC_ADDR STATE > >> pf 00:2b:19:05:03:00 ACTIVE > >> > >> The destination buffer is length-bounded and not required to be > >> NUL-terminated, so just change strscpy() to memcpy() to fix it. > > I think that you should change to strtomem() and not use plain memcpy(). > > > > Thanks > > Hi: > > We tried to replace memcpy with strtomem, but errors was reported during > compilation: > /kernel/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In > function ‘hclge_dbg_fill_content.part.0’: > /kernel/include/linux/compiler_types.h:397:38: error: call to > ‘__compiletime_assert_519’ declared with attribute error: BUILD_BUG_ON > failed: !__builtin_constant_p(_dest_len) || _dest_len == (size_t)-1 > 397 | _compiletime_assert(condition, msg, __compiletime_assert_, > __COUNTER__) > | ^ > /kernel/include/linux/compiler_types.h:378:4: note: in definition of > macro ‘__compiletime_assert’ > 378 | prefix ## suffix(); \ > | ^~~~~~ > /kernel/include/linux/compiler_types.h:397:2: note: in expansion of > macro ‘_compiletime_assert’ > 397 | _compiletime_assert(condition, msg, __compiletime_assert_, > __COUNTER__) > | ^~~~~~~~~~~~~~~~~~~ > /kernel/include/linux/build_bug.h:39:37: note: in expansion of macro > ‘compiletime_assert’ > 39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), > msg) > | ^~~~~~~~~~~~~~~~~~ > /kernel/include/linux/build_bug.h:50:2: note: in expansion of macro > ‘BUILD_BUG_ON_MSG’ > 50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) > | ^~~~~~~~~~~~~~~~ > /kernel/include/linux/string.h:302:2: note: in expansion of macro > ‘BUILD_BUG_ON’ > 302 | BUILD_BUG_ON(!__builtin_constant_p(_dest_len) || \ > | ^~~~~~~~~~~~ > /kernel/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:115:4: > note: in expansion of macro ‘strtomem’ > 115 | strtomem(pos, result[i]); > | ^~~~~~~~ > > In the strtomem macro, __builtin_object_size is used to calculate the > _dest_len. > We tried to print the _dest_len directly, and the result was -1. > How can we solve this? Let's add Kees in case he has a immediate recommendation on use of strtomem() vs memcpy() for this case..
On Thu, Aug 10, 2023 at 10:22:47AM -0700, Jakub Kicinski wrote: > On Thu, 10 Aug 2023 15:45:50 +0800 Jijie Shao wrote: > > on 2023/8/9 15:03, Leon Romanovsky wrote: > > > On Wed, Aug 09, 2023 at 10:09:02AM +0800, Jijie Shao wrote: > > >> From: Hao Chen <chenhao418@huawei.com> > > >> > > >> hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some > > >> items to a string for content, and we add '\n' and '\0' in the last > > >> two bytes of content. > > >> > > >> strscpy() will add '\0' in the last byte of destination buffer(one of > > >> items), it result in finishing content print ahead of schedule and some > > >> dump content truncation. > > >> > > >> One Error log shows as below: > > >> cat mac_list/uc > > >> UC MAC_LIST: > > >> > > >> Expected: > > >> UC MAC_LIST: > > >> FUNC_ID MAC_ADDR STATE > > >> pf 00:2b:19:05:03:00 ACTIVE > > >> > > >> The destination buffer is length-bounded and not required to be > > >> NUL-terminated, so just change strscpy() to memcpy() to fix it. > > > I think that you should change to strtomem() and not use plain memcpy(). > > > > > > Thanks > > > > Hi: > > > > We tried to replace memcpy with strtomem, but errors was reported during > > compilation: > > /kernel/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In > > function ‘hclge_dbg_fill_content.part.0’: > > /kernel/include/linux/compiler_types.h:397:38: error: call to > > ‘__compiletime_assert_519’ declared with attribute error: BUILD_BUG_ON > > failed: !__builtin_constant_p(_dest_len) || _dest_len == (size_t)-1 > > 397 | _compiletime_assert(condition, msg, __compiletime_assert_, > > __COUNTER__) > > | ^ > > /kernel/include/linux/compiler_types.h:378:4: note: in definition of > > macro ‘__compiletime_assert’ > > 378 | prefix ## suffix(); \ > > | ^~~~~~ > > /kernel/include/linux/compiler_types.h:397:2: note: in expansion of > > macro ‘_compiletime_assert’ > > 397 | _compiletime_assert(condition, msg, __compiletime_assert_, > > __COUNTER__) > > | ^~~~~~~~~~~~~~~~~~~ > > /kernel/include/linux/build_bug.h:39:37: note: in expansion of macro > > ‘compiletime_assert’ > > 39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), > > msg) > > | ^~~~~~~~~~~~~~~~~~ > > /kernel/include/linux/build_bug.h:50:2: note: in expansion of macro > > ‘BUILD_BUG_ON_MSG’ > > 50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) > > | ^~~~~~~~~~~~~~~~ > > /kernel/include/linux/string.h:302:2: note: in expansion of macro > > ‘BUILD_BUG_ON’ > > 302 | BUILD_BUG_ON(!__builtin_constant_p(_dest_len) || \ > > | ^~~~~~~~~~~~ > > /kernel/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:115:4: > > note: in expansion of macro ‘strtomem’ > > 115 | strtomem(pos, result[i]); > > | ^~~~~~~~ > > > > In the strtomem macro, __builtin_object_size is used to calculate the > > _dest_len. > > We tried to print the _dest_len directly, and the result was -1. > > How can we solve this? > > Let's add Kees in case he has a immediate recommendation on use of > strtomem() vs memcpy() for this case.. tldr: use memcpy() instead of strscpy(). Okay, I went to go read up on the history here. For my own notes, here's the original code, prior to 1cf3d5567f27 ("net: hns3: fix strncpy() not using dest-buf length as length issue"): static void hns3_dbg_fill_content(char *content, u16 len, const struct hns3_dbg_item *items, const char **result, u16 size) { char *pos = content; u16 i; memset(content, ' ', len); for (i = 0; i < size; i++) { if (result) strncpy(pos, result[i], strlen(result[i])); else strncpy(pos, items[i].name, strlen(items[i].name)); pos += strlen(items[i].name) + items[i].interval; } *pos++ = '\n'; *pos++ = '\0'; } The warning to be fixed was: hclge_debugfs.c:90:25: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] There are a few extra checks added in 1cf3d5567f27, but I'm more curious about this original code's intent. It seems very confusing to me. Firstly, why is "pos" updated based on "strlen(items[i].name)" even when "result[i]" is used? Secondly, why is "interval" used? (These concerns are mostly addressed in 1cf3d5567f27.) I guess I'd just like to take a step back and ask, "What is this function trying to do?" It seems to be building a series of strings in a " "-padding buffer, and it intends that the buffer be newline and %NUL terminated. It looks very much like it wants to _avoid_ adding %NUL termination when doing copies, which is why it's using strncpy with a length argument of the source string length: it's _forcing_ the copy to not be terminated. This is just memcpy. strtomem() is designed for buffer sizes that can be known at compile time, so it's not useful here (as was found), since a string is being built up and uses a moving pointer. I think the correct fix is to use memcpy() instead of strscpy(). No %NUL-truncation is desired, the sizes are already determined and bounds checked. (And the latter is what likely silenced the compiler warning.) -Kees
On Thu, 10 Aug 2023 11:23:46 -0700 Kees Cook wrote: > tldr: use memcpy() instead of strscpy(). > > > Okay, I went to go read up on the history here. For my own notes, here's > the original code, prior to 1cf3d5567f27 ("net: hns3: fix strncpy() > not using dest-buf length as length issue"): > > static void hns3_dbg_fill_content(char *content, u16 len, > const struct hns3_dbg_item *items, > const char **result, u16 size) > { > char *pos = content; > u16 i; > > memset(content, ' ', len); > for (i = 0; i < size; i++) { > if (result) > strncpy(pos, result[i], strlen(result[i])); > else > strncpy(pos, items[i].name, strlen(items[i].name)); > > pos += strlen(items[i].name) + items[i].interval; > } > > *pos++ = '\n'; > *pos++ = '\0'; > } > > The warning to be fixed was: > > hclge_debugfs.c:90:25: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] > > There are a few extra checks added in 1cf3d5567f27, but I'm more curious > about this original code's intent. It seems very confusing to me. > > Firstly, why is "pos" updated based on "strlen(items[i].name)" even when > "result[i]" is used? Secondly, why is "interval" used? (These concerns > are mostly addressed in 1cf3d5567f27.) > > I guess I'd just like to take a step back and ask, "What is this > function trying to do?" It seems to be building a series of strings in a > " "-padding buffer, and it intends that the buffer be newline and %NUL > terminated. > > It looks very much like it wants to _avoid_ adding %NUL termination when > doing copies, which is why it's using strncpy with a length argument of > the source string length: it's _forcing_ the copy to not be terminated. > This is just memcpy. > > strtomem() is designed for buffer sizes that can be known at compile > time, so it's not useful here (as was found), since a string is being > built up and uses a moving pointer. > > I think the correct fix is to use memcpy() instead of strscpy(). No > %NUL-truncation is desired, the sizes are already determined and bounds > checked. (And the latter is what likely silenced the compiler warning.) Got it, thanks!
Hello: This patch was applied to netdev/net.git (main) by Jakub Kicinski <kuba@kernel.org>: On Wed, 9 Aug 2023 10:09:02 +0800 you wrote: > From: Hao Chen <chenhao418@huawei.com> > > hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some > items to a string for content, and we add '\n' and '\0' in the last > two bytes of content. > > strscpy() will add '\0' in the last byte of destination buffer(one of > items), it result in finishing content print ahead of schedule and some > dump content truncation. > > [...] Here is the summary with links: - [net] net: hns3: fix strscpy causing content truncation issue https://git.kernel.org/netdev/net/c/5e3d20617b05 You are awesome, thank you!
on 2023/8/11 2:23, Kees Cook wrote: >> Let's add Kees in case he has a immediate recommendation on use of >> strtomem() vs memcpy() for this case.. > tldr: use memcpy() instead of strscpy(). > > > Okay, I went to go read up on the history here. For my own notes, here's > the original code, prior to 1cf3d5567f27 ("net: hns3: fix strncpy() > not using dest-buf length as length issue"): > > static void hns3_dbg_fill_content(char *content, u16 len, > const struct hns3_dbg_item *items, > const char **result, u16 size) > { > char *pos = content; > u16 i; > > memset(content, ' ', len); > for (i = 0; i < size; i++) { > if (result) > strncpy(pos, result[i], strlen(result[i])); > else > strncpy(pos, items[i].name, strlen(items[i].name)); > > pos += strlen(items[i].name) + items[i].interval; > } > > *pos++ = '\n'; > *pos++ = '\0'; > } > > The warning to be fixed was: > > hclge_debugfs.c:90:25: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] > > There are a few extra checks added in 1cf3d5567f27, but I'm more curious > about this original code's intent. It seems very confusing to me. > > Firstly, why is "pos" updated based on "strlen(items[i].name)" even when > "result[i]" is used? Secondly, why is "interval" used? (These concerns > are mostly addressed in 1cf3d5567f27.) > > I guess I'd just like to take a step back and ask, "What is this > function trying to do?" It seems to be building a series of strings in a > " "-padding buffer, and it intends that the buffer be newline and %NUL > terminated. > > It looks very much like it wants to _avoid_ adding %NUL termination when > doing copies, which is why it's using strncpy with a length argument of > the source string length: it's _forcing_ the copy to not be terminated. > This is just memcpy. > > strtomem() is designed for buffer sizes that can be known at compile > time, so it's not useful here (as was found), since a string is being > built up and uses a moving pointer. > > I think the correct fix is to use memcpy() instead of strscpy(). No > %NUL-truncation is desired, the sizes are already determined and bounds > checked. (And the latter is what likely silenced the compiler warning.) > > -Kees Yes, your guess is right, we want to copy the string without termination. Thanks for your introduction, we understand why strtomem() is not userful here. Regards Jijie Shao
On Thu, Aug 10, 2023 at 11:23:46AM -0700, Kees Cook wrote: > On Thu, Aug 10, 2023 at 10:22:47AM -0700, Jakub Kicinski wrote: > > On Thu, 10 Aug 2023 15:45:50 +0800 Jijie Shao wrote: > > > on 2023/8/9 15:03, Leon Romanovsky wrote: > > > > On Wed, Aug 09, 2023 at 10:09:02AM +0800, Jijie Shao wrote: > > > >> From: Hao Chen <chenhao418@huawei.com> > > > >> > > > >> hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some > > > >> items to a string for content, and we add '\n' and '\0' in the last > > > >> two bytes of content. > > > >> > > > >> strscpy() will add '\0' in the last byte of destination buffer(one of > > > >> items), it result in finishing content print ahead of schedule and some > > > >> dump content truncation. > > > >> > > > >> One Error log shows as below: > > > >> cat mac_list/uc > > > >> UC MAC_LIST: > > > >> > > > >> Expected: > > > >> UC MAC_LIST: > > > >> FUNC_ID MAC_ADDR STATE > > > >> pf 00:2b:19:05:03:00 ACTIVE > > > >> > > > >> The destination buffer is length-bounded and not required to be > > > >> NUL-terminated, so just change strscpy() to memcpy() to fix it. > > > > I think that you should change to strtomem() and not use plain memcpy(). > > > > > > > > Thanks > > > > > > Hi: > > > > > > We tried to replace memcpy with strtomem, but errors was reported during > > > compilation: > > > /kernel/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In > > > function ‘hclge_dbg_fill_content.part.0’: > > > /kernel/include/linux/compiler_types.h:397:38: error: call to > > > ‘__compiletime_assert_519’ declared with attribute error: BUILD_BUG_ON > > > failed: !__builtin_constant_p(_dest_len) || _dest_len == (size_t)-1 > > > 397 | _compiletime_assert(condition, msg, __compiletime_assert_, > > > __COUNTER__) > > > | ^ > > > /kernel/include/linux/compiler_types.h:378:4: note: in definition of > > > macro ‘__compiletime_assert’ > > > 378 | prefix ## suffix(); \ > > > | ^~~~~~ > > > /kernel/include/linux/compiler_types.h:397:2: note: in expansion of > > > macro ‘_compiletime_assert’ > > > 397 | _compiletime_assert(condition, msg, __compiletime_assert_, > > > __COUNTER__) > > > | ^~~~~~~~~~~~~~~~~~~ > > > /kernel/include/linux/build_bug.h:39:37: note: in expansion of macro > > > ‘compiletime_assert’ > > > 39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), > > > msg) > > > | ^~~~~~~~~~~~~~~~~~ > > > /kernel/include/linux/build_bug.h:50:2: note: in expansion of macro > > > ‘BUILD_BUG_ON_MSG’ > > > 50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) > > > | ^~~~~~~~~~~~~~~~ > > > /kernel/include/linux/string.h:302:2: note: in expansion of macro > > > ‘BUILD_BUG_ON’ > > > 302 | BUILD_BUG_ON(!__builtin_constant_p(_dest_len) || \ > > > | ^~~~~~~~~~~~ > > > /kernel/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:115:4: > > > note: in expansion of macro ‘strtomem’ > > > 115 | strtomem(pos, result[i]); > > > | ^~~~~~~~ > > > > > > In the strtomem macro, __builtin_object_size is used to calculate the > > > _dest_len. > > > We tried to print the _dest_len directly, and the result was -1. > > > How can we solve this? > > > > Let's add Kees in case he has a immediate recommendation on use of > > strtomem() vs memcpy() for this case.. > > tldr: use memcpy() instead of strscpy(). > > > Okay, I went to go read up on the history here. For my own notes, here's > the original code, prior to 1cf3d5567f27 ("net: hns3: fix strncpy() > not using dest-buf length as length issue"): > > static void hns3_dbg_fill_content(char *content, u16 len, > const struct hns3_dbg_item *items, > const char **result, u16 size) > { > char *pos = content; > u16 i; > > memset(content, ' ', len); > for (i = 0; i < size; i++) { > if (result) > strncpy(pos, result[i], strlen(result[i])); > else > strncpy(pos, items[i].name, strlen(items[i].name)); > > pos += strlen(items[i].name) + items[i].interval; > } > > *pos++ = '\n'; > *pos++ = '\0'; > } > > The warning to be fixed was: > > hclge_debugfs.c:90:25: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] > > There are a few extra checks added in 1cf3d5567f27, but I'm more curious > about this original code's intent. It seems very confusing to me. > > Firstly, why is "pos" updated based on "strlen(items[i].name)" even when > "result[i]" is used? Secondly, why is "interval" used? (These concerns > are mostly addressed in 1cf3d5567f27.) > > I guess I'd just like to take a step back and ask, "What is this > function trying to do?" It seems to be building a series of strings in a > " "-padding buffer, and it intends that the buffer be newline and %NUL > terminated. > > It looks very much like it wants to _avoid_ adding %NUL termination when > doing copies, which is why it's using strncpy with a length argument of > the source string length: it's _forcing_ the copy to not be terminated. > This is just memcpy. > > strtomem() is designed for buffer sizes that can be known at compile > time, so it's not useful here (as was found), since a string is being > built up and uses a moving pointer. > > I think the correct fix is to use memcpy() instead of strscpy(). No > %NUL-truncation is desired, the sizes are already determined and bounds > checked. (And the latter is what likely silenced the compiler warning.) Thanks for an explanation. > > -Kees > > -- > Kees Cook
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c index 52546f625c8b..f276b5ecb431 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c @@ -464,9 +464,9 @@ static void hns3_dbg_fill_content(char *content, u16 len, if (result) { if (item_len < strlen(result[i])) break; - strscpy(pos, result[i], strlen(result[i])); + memcpy(pos, result[i], strlen(result[i])); } else { - strscpy(pos, items[i].name, strlen(items[i].name)); + memcpy(pos, items[i].name, strlen(items[i].name)); } pos += item_len; len -= item_len; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c index 409db2e70965..0fb2eaee3e8a 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c @@ -111,9 +111,9 @@ static void hclge_dbg_fill_content(char *content, u16 len, if (result) { if (item_len < strlen(result[i])) break; - strscpy(pos, result[i], strlen(result[i])); + memcpy(pos, result[i], strlen(result[i])); } else { - strscpy(pos, items[i].name, strlen(items[i].name)); + memcpy(pos, items[i].name, strlen(items[i].name)); } pos += item_len; len -= item_len;