Message ID | 20230809114906.21866-4-danishanwar@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Introduce IEP driver and packet timestamping support | expand |
On 8/9/23 6:49 AM, MD Danish Anwar wrote: > From: Roger Quadros <rogerq@ti.com> > > Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to > support timestamping of ethernet packets and thus support PTP and PPS > for PRU ethernet ports. > > Signed-off-by: Roger Quadros <rogerq@ti.com> > Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> > Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> > Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> > Signed-off-by: MD Danish Anwar <danishanwar@ti.com> > --- > drivers/net/ethernet/ti/Kconfig | 12 + > drivers/net/ethernet/ti/Makefile | 1 + > drivers/net/ethernet/ti/icssg/icss_iep.c | 935 +++++++++++++++++++++++ > drivers/net/ethernet/ti/icssg/icss_iep.h | 38 + > 4 files changed, 986 insertions(+) > create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.c > create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.h > > diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig > index 63e510b6860f..88b5b1b47779 100644 > --- a/drivers/net/ethernet/ti/Kconfig > +++ b/drivers/net/ethernet/ti/Kconfig > @@ -186,6 +186,7 @@ config CPMAC > config TI_ICSSG_PRUETH > tristate "TI Gigabit PRU Ethernet driver" > select PHYLIB > + select TI_ICSS_IEP Why not save selecting this until you add its use in the ICSSG_PRUETH driver in the next patch. [...] > + > +static u32 icss_iep_readl(struct icss_iep *iep, int reg) > +{ > + return readl(iep->base + iep->plat_data->reg_offs[reg]); > +} Do these one line functions really add anything? Actually why not use the regmap you have here. [...] > +static void icss_iep_enable(struct icss_iep *iep) > +{ > + regmap_update_bits(iep->map, ICSS_IEP_GLOBAL_CFG_REG, > + IEP_GLOBAL_CFG_CNT_ENABLE, > + IEP_GLOBAL_CFG_CNT_ENABLE); Have you looked into regmap_fields? [...] > + > + if (!!(iep->latch_enable & BIT(index)) == !!on) > + goto exit; > + There has to be a better way to write this logic.. [...] > + > +static const struct of_device_id icss_iep_of_match[]; > + Why the forward declaration? > +static int icss_iep_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct icss_iep *iep; > + struct clk *iep_clk; > + > + iep = devm_kzalloc(dev, sizeof(*iep), GFP_KERNEL); > + if (!iep) > + return -ENOMEM; > + > + iep->dev = dev; > + iep->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(iep->base)) > + return -ENODEV; > + > + iep_clk = devm_clk_get(dev, NULL); > + if (IS_ERR(iep_clk)) > + return PTR_ERR(iep_clk); > + > + iep->refclk_freq = clk_get_rate(iep_clk); > + > + iep->def_inc = NSEC_PER_SEC / iep->refclk_freq; /* ns per clock tick */ > + if (iep->def_inc > IEP_MAX_DEF_INC) { > + dev_err(dev, "Failed to set def_inc %d. IEP_clock is too slow to be supported\n", > + iep->def_inc); > + return -EINVAL; > + } > + > + iep->plat_data = of_device_get_match_data(dev); Directly using of_*() functions is often wrong, try just device_get_match_data(). [...] > +static struct platform_driver icss_iep_driver = { > + .driver = { > + .name = "icss-iep", > + .of_match_table = of_match_ptr(icss_iep_of_match), This driver cannot work without OF, using of_match_ptr() is not needed. Andrew
Hi Andrew, On 09/08/23 8:30 pm, Andrew Davis wrote: > On 8/9/23 6:49 AM, MD Danish Anwar wrote: >> From: Roger Quadros <rogerq@ti.com> >> >> Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to >> support timestamping of ethernet packets and thus support PTP and PPS >> for PRU ethernet ports. >> >> Signed-off-by: Roger Quadros <rogerq@ti.com> >> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> >> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> >> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> >> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> >> --- >> drivers/net/ethernet/ti/Kconfig | 12 + >> drivers/net/ethernet/ti/Makefile | 1 + >> drivers/net/ethernet/ti/icssg/icss_iep.c | 935 +++++++++++++++++++++++ >> drivers/net/ethernet/ti/icssg/icss_iep.h | 38 + >> 4 files changed, 986 insertions(+) >> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.c >> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.h >> >> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig >> index 63e510b6860f..88b5b1b47779 100644 >> --- a/drivers/net/ethernet/ti/Kconfig >> +++ b/drivers/net/ethernet/ti/Kconfig >> @@ -186,6 +186,7 @@ config CPMAC >> config TI_ICSSG_PRUETH >> tristate "TI Gigabit PRU Ethernet driver" >> select PHYLIB >> + select TI_ICSS_IEP > > Why not save selecting this until you add its use in the ICSSG_PRUETH driver in > the next patch. > The next patch is only adding changes to icssg-prueth .c /.h files. This patch is adding changes to Kconfig and the Makefile. To keep it that way selecting this is added in this patch. No worries, I will move this to next patch. > [...] > >> + >> +static u32 icss_iep_readl(struct icss_iep *iep, int reg) >> +{ >> + return readl(iep->base + iep->plat_data->reg_offs[reg]); >> +} > > Do these one line functions really add anything? Actually why > not use the regmap you have here. These one line functions are not really adding anything but they are acting as a wrapper around readl /writel and providing some sort of encapsulation as directly calling readl will result in a little complicated code. /* WIth One line function */ ts_lo = icss_iep_readl(iep, ICSS_IEP_COUNT_REG0); /* Without one line function */ ts_lo = readl(iep->base, iep->plat_data->reg_offs[ICSS_IEP_COUNT_REG0]); Previously regmap was used in this driver. But in older commit [1] in 5.10-ti-linux-kernel (Before I picked the driver for upstream) it got changed to readl / writel stating that regmap_read / write is too slow. IEP is time sensitive and needs faster read and write, probably because of this they changed it. > > [...] > >> +static void icss_iep_enable(struct icss_iep *iep) >> +{ >> + regmap_update_bits(iep->map, ICSS_IEP_GLOBAL_CFG_REG, >> + IEP_GLOBAL_CFG_CNT_ENABLE, >> + IEP_GLOBAL_CFG_CNT_ENABLE); > > Have you looked into regmap_fields? > No I hadn't. But now I looked into regmap_fields, seems to be another way to update the bits, instead of passing mask and value, regmap_filed_read / write only takes the value. But for that we will need to create a regmap field. If you want me to switch to regmap_fields instead of regmap_update_bits I can make the changes. But I am fine with regmap_update_bits(). > [...] > >> + >> + if (!!(iep->latch_enable & BIT(index)) == !!on) >> + goto exit; >> + > > There has to be a better way to write this logic.. > > [...] > >> + >> +static const struct of_device_id icss_iep_of_match[]; >> + > > Why the forward declaration? I will remove this, I don't see any reason for this. > >> +static int icss_iep_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct icss_iep *iep; >> + struct clk *iep_clk; >> + >> + iep = devm_kzalloc(dev, sizeof(*iep), GFP_KERNEL); >> + if (!iep) >> + return -ENOMEM; >> + >> + iep->dev = dev; >> + iep->base = devm_platform_ioremap_resource(pdev, 0); >> + if (IS_ERR(iep->base)) >> + return -ENODEV; >> + >> + iep_clk = devm_clk_get(dev, NULL); >> + if (IS_ERR(iep_clk)) >> + return PTR_ERR(iep_clk); >> + >> + iep->refclk_freq = clk_get_rate(iep_clk); >> + >> + iep->def_inc = NSEC_PER_SEC / iep->refclk_freq; /* ns per clock tick */ >> + if (iep->def_inc > IEP_MAX_DEF_INC) { >> + dev_err(dev, "Failed to set def_inc %d. IEP_clock is too slow to be >> supported\n", >> + iep->def_inc); >> + return -EINVAL; >> + } >> + >> + iep->plat_data = of_device_get_match_data(dev); > > Directly using of_*() functions is often wrong, try just device_get_match_data(). > Sure. I will change to device_get_match_data(). > [...] > >> +static struct platform_driver icss_iep_driver = { >> + .driver = { >> + .name = "icss-iep", >> + .of_match_table = of_match_ptr(icss_iep_of_match), > > This driver cannot work without OF, using of_match_ptr() is not needed. > Sure, I will drop of_match_ptr(). > Andrew For reading and updating registers, we can have 1. icss_iep_readl / writel and regmap_update_bits() OR 2. regmap_read / write and regmap_update_bits() OR 3. icss_iep_readl / writel and regmap_fields OR 4. regmap_read / write and regmap_fields Currently we are using 1. Please let me know if you are fine with this and I can continue using 1. If not, please let me know your recommendation out of this 4. [1] https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?h=linux-5.10.y&id=f4f45bf71cad5be232536d63a0557d13a7eed162
On 10/08/2023 14:50, Md Danish Anwar wrote: > Hi Andrew, > > On 09/08/23 8:30 pm, Andrew Davis wrote: >> On 8/9/23 6:49 AM, MD Danish Anwar wrote: >>> From: Roger Quadros <rogerq@ti.com> >>> >>> Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to >>> support timestamping of ethernet packets and thus support PTP and PPS >>> for PRU ethernet ports. >>> >>> Signed-off-by: Roger Quadros <rogerq@ti.com> >>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> >>> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> >>> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> >>> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> >>> --- >>> drivers/net/ethernet/ti/Kconfig | 12 + >>> drivers/net/ethernet/ti/Makefile | 1 + >>> drivers/net/ethernet/ti/icssg/icss_iep.c | 935 +++++++++++++++++++++++ >>> drivers/net/ethernet/ti/icssg/icss_iep.h | 38 + >>> 4 files changed, 986 insertions(+) >>> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.c >>> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.h >>> >>> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig >>> index 63e510b6860f..88b5b1b47779 100644 >>> --- a/drivers/net/ethernet/ti/Kconfig >>> +++ b/drivers/net/ethernet/ti/Kconfig >>> @@ -186,6 +186,7 @@ config CPMAC >>> config TI_ICSSG_PRUETH >>> tristate "TI Gigabit PRU Ethernet driver" >>> select PHYLIB >>> + select TI_ICSS_IEP >> >> Why not save selecting this until you add its use in the ICSSG_PRUETH driver in >> the next patch. >> > > The next patch is only adding changes to icssg-prueth .c /.h files. This patch > is adding changes to Kconfig and the Makefile. To keep it that way selecting > this is added in this patch. No worries, I will move this to next patch. > >> [...] >> >>> + >>> +static u32 icss_iep_readl(struct icss_iep *iep, int reg) >>> +{ >>> + return readl(iep->base + iep->plat_data->reg_offs[reg]); >>> +} >> >> Do these one line functions really add anything? Actually why >> not use the regmap you have here. > > These one line functions are not really adding anything but they are acting as > a wrapper around readl /writel and providing some sort of encapsulation as > directly calling readl will result in a little complicated code. > > /* WIth One line function */ > ts_lo = icss_iep_readl(iep, ICSS_IEP_COUNT_REG0); > > /* Without one line function */ > ts_lo = readl(iep->base, iep->plat_data->reg_offs[ICSS_IEP_COUNT_REG0]); > > Previously regmap was used in this driver. But in older commit [1] in > 5.10-ti-linux-kernel (Before I picked the driver for upstream) it got changed > to readl / writel stating that regmap_read / write is too slow. IEP is time > sensitive and needs faster read and write, probably because of this they > changed it. This is true. Can you please pick the exact reasoning mentioned there and put it as a comment where you use read/writel() instead of regmap() so we don't forget this and accidentally switch it back to regmap() in the future. I think this is only required for read/write to the IEP count register and SYNC_CTRL_REG when doing gettime/settime.
On 10/08/23 5:35 pm, Roger Quadros wrote: > > > On 10/08/2023 14:50, Md Danish Anwar wrote: >> Hi Andrew, >> >> On 09/08/23 8:30 pm, Andrew Davis wrote: >>> On 8/9/23 6:49 AM, MD Danish Anwar wrote: >>>> From: Roger Quadros <rogerq@ti.com> >>>> >>>> Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to >>>> support timestamping of ethernet packets and thus support PTP and PPS >>>> for PRU ethernet ports. >>>> >>>> Signed-off-by: Roger Quadros <rogerq@ti.com> >>>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> >>>> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> >>>> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> >>>> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> >>>> --- >>>> drivers/net/ethernet/ti/Kconfig | 12 + >>>> drivers/net/ethernet/ti/Makefile | 1 + >>>> drivers/net/ethernet/ti/icssg/icss_iep.c | 935 +++++++++++++++++++++++ >>>> drivers/net/ethernet/ti/icssg/icss_iep.h | 38 + >>>> 4 files changed, 986 insertions(+) >>>> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.c >>>> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.h >>>> >>>> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig >>>> index 63e510b6860f..88b5b1b47779 100644 >>>> --- a/drivers/net/ethernet/ti/Kconfig >>>> +++ b/drivers/net/ethernet/ti/Kconfig >>>> @@ -186,6 +186,7 @@ config CPMAC >>>> config TI_ICSSG_PRUETH >>>> tristate "TI Gigabit PRU Ethernet driver" >>>> select PHYLIB >>>> + select TI_ICSS_IEP >>> >>> Why not save selecting this until you add its use in the ICSSG_PRUETH driver in >>> the next patch. >>> >> >> The next patch is only adding changes to icssg-prueth .c /.h files. This patch >> is adding changes to Kconfig and the Makefile. To keep it that way selecting >> this is added in this patch. No worries, I will move this to next patch. >> >>> [...] >>> >>>> + >>>> +static u32 icss_iep_readl(struct icss_iep *iep, int reg) >>>> +{ >>>> + return readl(iep->base + iep->plat_data->reg_offs[reg]); >>>> +} >>> >>> Do these one line functions really add anything? Actually why >>> not use the regmap you have here. >> >> These one line functions are not really adding anything but they are acting as >> a wrapper around readl /writel and providing some sort of encapsulation as >> directly calling readl will result in a little complicated code. >> >> /* WIth One line function */ >> ts_lo = icss_iep_readl(iep, ICSS_IEP_COUNT_REG0); >> >> /* Without one line function */ >> ts_lo = readl(iep->base, iep->plat_data->reg_offs[ICSS_IEP_COUNT_REG0]); >> >> Previously regmap was used in this driver. But in older commit [1] in >> 5.10-ti-linux-kernel (Before I picked the driver for upstream) it got changed >> to readl / writel stating that regmap_read / write is too slow. IEP is time >> sensitive and needs faster read and write, probably because of this they >> changed it. > > This is true. Can you please pick the exact reasoning mentioned there > and put it as a comment where you use read/writel() instead of regmap() > so we don't forget this and accidentally switch it back to regmap() > in the future. > Sure I can add this comment wherever we use readl / writel(). > I think this is only required for read/write to the IEP count register and > SYNC_CTRL_REG when doing gettime/settime. > Yes. This is only used in SYNC_CTRL_REG and IEP counters.
On 8/10/23 6:50 AM, Md Danish Anwar wrote: > Hi Andrew, > > On 09/08/23 8:30 pm, Andrew Davis wrote: >> On 8/9/23 6:49 AM, MD Danish Anwar wrote: >>> From: Roger Quadros <rogerq@ti.com> >>> >>> Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to >>> support timestamping of ethernet packets and thus support PTP and PPS >>> for PRU ethernet ports. >>> >>> Signed-off-by: Roger Quadros <rogerq@ti.com> >>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> >>> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> >>> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> >>> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> >>> --- >>> drivers/net/ethernet/ti/Kconfig | 12 + >>> drivers/net/ethernet/ti/Makefile | 1 + >>> drivers/net/ethernet/ti/icssg/icss_iep.c | 935 +++++++++++++++++++++++ >>> drivers/net/ethernet/ti/icssg/icss_iep.h | 38 + >>> 4 files changed, 986 insertions(+) >>> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.c >>> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.h >>> >>> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig >>> index 63e510b6860f..88b5b1b47779 100644 >>> --- a/drivers/net/ethernet/ti/Kconfig >>> +++ b/drivers/net/ethernet/ti/Kconfig >>> @@ -186,6 +186,7 @@ config CPMAC >>> config TI_ICSSG_PRUETH >>> tristate "TI Gigabit PRU Ethernet driver" >>> select PHYLIB >>> + select TI_ICSS_IEP >> >> Why not save selecting this until you add its use in the ICSSG_PRUETH driver in >> the next patch. >> > > The next patch is only adding changes to icssg-prueth .c /.h files. This patch > is adding changes to Kconfig and the Makefile. To keep it that way selecting > this is added in this patch. No worries, I will move this to next patch. > >> [...] >> >>> + >>> +static u32 icss_iep_readl(struct icss_iep *iep, int reg) >>> +{ >>> + return readl(iep->base + iep->plat_data->reg_offs[reg]); >>> +} >> >> Do these one line functions really add anything? Actually why >> not use the regmap you have here. > > These one line functions are not really adding anything but they are acting as > a wrapper around readl /writel and providing some sort of encapsulation as > directly calling readl will result in a little complicated code. > > /* WIth One line function */ > ts_lo = icss_iep_readl(iep, ICSS_IEP_COUNT_REG0); > > /* Without one line function */ > ts_lo = readl(iep->base, iep->plat_data->reg_offs[ICSS_IEP_COUNT_REG0]); > > Previously regmap was used in this driver. But in older commit [1] in > 5.10-ti-linux-kernel (Before I picked the driver for upstream) it got changed > to readl / writel stating that regmap_read / write is too slow. IEP is time > sensitive and needs faster read and write, probably because of this they > changed it. > Sounds like you only need direct register access for time sensitive gettime/settime functions, if that is the only place writel()/readl() is needed just drop the helper and use directly in that one spot. >> >> [...] >> >>> +static void icss_iep_enable(struct icss_iep *iep) >>> +{ >>> + regmap_update_bits(iep->map, ICSS_IEP_GLOBAL_CFG_REG, >>> + IEP_GLOBAL_CFG_CNT_ENABLE, >>> + IEP_GLOBAL_CFG_CNT_ENABLE); >> >> Have you looked into regmap_fields? >> > > No I hadn't. But now I looked into regmap_fields, seems to be another way to > update the bits, instead of passing mask and value, regmap_filed_read / write > only takes the value. But for that we will need to create a regmap field. If > you want me to switch to regmap_fields instead of regmap_update_bits I can make > the changes. But I am fine with regmap_update_bits(). > I'm suggesting regmap fields as I have used it several times and it resulted in greatly improved readability. Yes you will need a regmap field table, but that is the best part, it lets you put all your bit definitions in one spot that can match 1:1 with the datasheet, much easier to check for correctness than if the bit usages are all spread out in the driver. I won't insist on you converting this driver to use it today, but I do recommend you at least give it a shot for your own learning. Andrew >> [...] >> >>> + >>> + if (!!(iep->latch_enable & BIT(index)) == !!on) >>> + goto exit; >>> + >> >> There has to be a better way to write this logic.. >> >> [...] >> >>> + >>> +static const struct of_device_id icss_iep_of_match[]; >>> + >> >> Why the forward declaration? > > I will remove this, I don't see any reason for this. > >> >>> +static int icss_iep_probe(struct platform_device *pdev) >>> +{ >>> + struct device *dev = &pdev->dev; >>> + struct icss_iep *iep; >>> + struct clk *iep_clk; >>> + >>> + iep = devm_kzalloc(dev, sizeof(*iep), GFP_KERNEL); >>> + if (!iep) >>> + return -ENOMEM; >>> + >>> + iep->dev = dev; >>> + iep->base = devm_platform_ioremap_resource(pdev, 0); >>> + if (IS_ERR(iep->base)) >>> + return -ENODEV; >>> + >>> + iep_clk = devm_clk_get(dev, NULL); >>> + if (IS_ERR(iep_clk)) >>> + return PTR_ERR(iep_clk); >>> + >>> + iep->refclk_freq = clk_get_rate(iep_clk); >>> + >>> + iep->def_inc = NSEC_PER_SEC / iep->refclk_freq; /* ns per clock tick */ >>> + if (iep->def_inc > IEP_MAX_DEF_INC) { >>> + dev_err(dev, "Failed to set def_inc %d. IEP_clock is too slow to be >>> supported\n", >>> + iep->def_inc); >>> + return -EINVAL; >>> + } >>> + >>> + iep->plat_data = of_device_get_match_data(dev); >> >> Directly using of_*() functions is often wrong, try just device_get_match_data(). >> > > Sure. I will change to device_get_match_data(). > >> [...] >> >>> +static struct platform_driver icss_iep_driver = { >>> + .driver = { >>> + .name = "icss-iep", >>> + .of_match_table = of_match_ptr(icss_iep_of_match), >> >> This driver cannot work without OF, using of_match_ptr() is not needed. >> > > Sure, I will drop of_match_ptr(). > >> Andrew > > > For reading and updating registers, we can have > 1. icss_iep_readl / writel and regmap_update_bits() OR > 2. regmap_read / write and regmap_update_bits() OR > 3. icss_iep_readl / writel and regmap_fields OR > 4. regmap_read / write and regmap_fields > > > Currently we are using 1. Please let me know if you are fine with this and I > can continue using 1. If not, please let me know your recommendation out of this 4. > > [1] > https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?h=linux-5.10.y&id=f4f45bf71cad5be232536d63a0557d13a7eed162 >
On 11/08/23 8:54 pm, Andrew Davis wrote: > On 8/10/23 6:50 AM, Md Danish Anwar wrote: >> Hi Andrew, >> >> On 09/08/23 8:30 pm, Andrew Davis wrote: >>> On 8/9/23 6:49 AM, MD Danish Anwar wrote: >>>> From: Roger Quadros <rogerq@ti.com> >>>> >>>> Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to >>>> support timestamping of ethernet packets and thus support PTP and PPS >>>> for PRU ethernet ports. >>>> >>>> Signed-off-by: Roger Quadros <rogerq@ti.com> >>>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> >>>> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> >>>> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> >>>> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> >>>> --- >>>> drivers/net/ethernet/ti/Kconfig | 12 + >>>> drivers/net/ethernet/ti/Makefile | 1 + >>>> drivers/net/ethernet/ti/icssg/icss_iep.c | 935 +++++++++++++++++++++++ >>>> drivers/net/ethernet/ti/icssg/icss_iep.h | 38 + >>>> 4 files changed, 986 insertions(+) >>>> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.c >>>> create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.h >>>> >>>> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig >>>> index 63e510b6860f..88b5b1b47779 100644 >>>> --- a/drivers/net/ethernet/ti/Kconfig >>>> +++ b/drivers/net/ethernet/ti/Kconfig >>>> @@ -186,6 +186,7 @@ config CPMAC >>>> config TI_ICSSG_PRUETH >>>> tristate "TI Gigabit PRU Ethernet driver" >>>> select PHYLIB >>>> + select TI_ICSS_IEP >>> >>> Why not save selecting this until you add its use in the ICSSG_PRUETH driver in >>> the next patch. >>> >> >> The next patch is only adding changes to icssg-prueth .c /.h files. This patch >> is adding changes to Kconfig and the Makefile. To keep it that way selecting >> this is added in this patch. No worries, I will move this to next patch. >> >>> [...] >>> >>>> + >>>> +static u32 icss_iep_readl(struct icss_iep *iep, int reg) >>>> +{ >>>> + return readl(iep->base + iep->plat_data->reg_offs[reg]); >>>> +} >>> >>> Do these one line functions really add anything? Actually why >>> not use the regmap you have here. >> >> These one line functions are not really adding anything but they are acting as >> a wrapper around readl /writel and providing some sort of encapsulation as >> directly calling readl will result in a little complicated code. >> >> /* WIth One line function */ >> ts_lo = icss_iep_readl(iep, ICSS_IEP_COUNT_REG0); >> >> /* Without one line function */ >> ts_lo = readl(iep->base, iep->plat_data->reg_offs[ICSS_IEP_COUNT_REG0]); >> >> Previously regmap was used in this driver. But in older commit [1] in >> 5.10-ti-linux-kernel (Before I picked the driver for upstream) it got changed >> to readl / writel stating that regmap_read / write is too slow. IEP is time >> sensitive and needs faster read and write, probably because of this they >> changed it. >> > > Sounds like you only need direct register access for time sensitive > gettime/settime functions, if that is the only place writel()/readl() is > needed just drop the helper and use directly in that one spot. > In total both icss_iep_readl() and writel() are used 4 time each. All related to gettime / settime. This is the only place where these helper APIs are used. I will drop these helper apis and used readl / writel directly. >>> >>> [...] >>> >>>> +static void icss_iep_enable(struct icss_iep *iep) >>>> +{ >>>> + regmap_update_bits(iep->map, ICSS_IEP_GLOBAL_CFG_REG, >>>> + IEP_GLOBAL_CFG_CNT_ENABLE, >>>> + IEP_GLOBAL_CFG_CNT_ENABLE); >>> >>> Have you looked into regmap_fields? >>> >> >> No I hadn't. But now I looked into regmap_fields, seems to be another way to >> update the bits, instead of passing mask and value, regmap_filed_read / write >> only takes the value. But for that we will need to create a regmap field. If >> you want me to switch to regmap_fields instead of regmap_update_bits I can make >> the changes. But I am fine with regmap_update_bits(). >> > > I'm suggesting regmap fields as I have used it several times and it resulted > in greatly improved readability. Yes you will need a regmap field table, but > that is the best part, it lets you put all your bit definitions in one spot > that can match 1:1 with the datasheet, much easier to check for correctness > than if the bit usages are all spread out in the driver. > > I won't insist on you converting this driver to use it today, but I do recommend > you at least give it a shot for your own learning. > Sure Andrew. For now I will keep it as regmap_update_bits(). I will look into regmap_fields for my own learning. > Andrew > >>> [...] >>> >>>> + >>>> + if (!!(iep->latch_enable & BIT(index)) == !!on) >>>> + goto exit; >>>> + >>> >>> There has to be a better way to write this logic.. >>> >>> [...] >>> >>>> + >>>> +static const struct of_device_id icss_iep_of_match[]; >>>> + >>> >>> Why the forward declaration? >> >> I will remove this, I don't see any reason for this. >> >>> >>>> +static int icss_iep_probe(struct platform_device *pdev) >>>> +{ >>>> + struct device *dev = &pdev->dev; >>>> + struct icss_iep *iep; >>>> + struct clk *iep_clk; >>>> + >>>> + iep = devm_kzalloc(dev, sizeof(*iep), GFP_KERNEL); >>>> + if (!iep) >>>> + return -ENOMEM; >>>> + >>>> + iep->dev = dev; >>>> + iep->base = devm_platform_ioremap_resource(pdev, 0); >>>> + if (IS_ERR(iep->base)) >>>> + return -ENODEV; >>>> + >>>> + iep_clk = devm_clk_get(dev, NULL); >>>> + if (IS_ERR(iep_clk)) >>>> + return PTR_ERR(iep_clk); >>>> + >>>> + iep->refclk_freq = clk_get_rate(iep_clk); >>>> + >>>> + iep->def_inc = NSEC_PER_SEC / iep->refclk_freq; /* ns per clock >>>> tick */ >>>> + if (iep->def_inc > IEP_MAX_DEF_INC) { >>>> + dev_err(dev, "Failed to set def_inc %d. IEP_clock is too slow to be >>>> supported\n", >>>> + iep->def_inc); >>>> + return -EINVAL; >>>> + } >>>> + >>>> + iep->plat_data = of_device_get_match_data(dev); >>> >>> Directly using of_*() functions is often wrong, try just >>> device_get_match_data(). >>> >> >> Sure. I will change to device_get_match_data(). >> >>> [...] >>> >>>> +static struct platform_driver icss_iep_driver = { >>>> + .driver = { >>>> + .name = "icss-iep", >>>> + .of_match_table = of_match_ptr(icss_iep_of_match), >>> >>> This driver cannot work without OF, using of_match_ptr() is not needed. >>> >> >> Sure, I will drop of_match_ptr(). >> >>> Andrew >> >> >> For reading and updating registers, we can have >> 1. icss_iep_readl / writel and regmap_update_bits() OR >> 2. regmap_read / write and regmap_update_bits() OR >> 3. icss_iep_readl / writel and regmap_fields OR >> 4. regmap_read / write and regmap_fields >> >> >> Currently we are using 1. Please let me know if you are fine with this and I >> can continue using 1. If not, please let me know your recommendation out of >> this 4. >> >> [1] >> https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?h=linux-5.10.y&id=f4f45bf71cad5be232536d63a0557d13a7eed162 >>
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index 63e510b6860f..88b5b1b47779 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -186,6 +186,7 @@ config CPMAC config TI_ICSSG_PRUETH tristate "TI Gigabit PRU Ethernet driver" select PHYLIB + select TI_ICSS_IEP depends on PRU_REMOTEPROC depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER help @@ -196,4 +197,15 @@ config TI_ICSSG_PRUETH to support the Ethernet operation. Currently, it supports Ethernet with 1G and 100M link speed. +config TI_ICSS_IEP + tristate "TI PRU ICSS IEP driver" + depends on TI_PRUSS + default TI_PRUSS + help + This driver enables support for the PRU-ICSS Industrial Ethernet + Peripheral within a PRU-ICSS subsystem present on various TI SoCs. + + To compile this driver as a module, choose M here. The module + will be called icss_iep. + endif # NET_VENDOR_TI diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile index 9176d79c36e1..34fd7a716ba6 100644 --- a/drivers/net/ethernet/ti/Makefile +++ b/drivers/net/ethernet/ti/Makefile @@ -38,3 +38,4 @@ icssg-prueth-y := k3-cppi-desc-pool.o \ icssg/icssg_mii_cfg.o \ icssg/icssg_stats.o \ icssg/icssg_ethtool.o +obj-$(CONFIG_TI_ICSS_IEP) += icssg/icss_iep.o diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.c b/drivers/net/ethernet/ti/icssg/icss_iep.c new file mode 100644 index 000000000000..455c803dea36 --- /dev/null +++ b/drivers/net/ethernet/ti/icssg/icss_iep.c @@ -0,0 +1,935 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* Texas Instruments ICSSG Industrial Ethernet Peripheral (IEP) Driver + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com + * + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/timekeeping.h> +#include <linux/interrupt.h> +#include <linux/of_irq.h> + +#include "icss_iep.h" + +#define IEP_MAX_DEF_INC 0xf +#define IEP_MAX_COMPEN_INC 0xfff +#define IEP_MAX_COMPEN_COUNT 0xffffff + +#define IEP_GLOBAL_CFG_CNT_ENABLE BIT(0) +#define IEP_GLOBAL_CFG_DEFAULT_INC_MASK GENMASK(7, 4) +#define IEP_GLOBAL_CFG_DEFAULT_INC_SHIFT 4 +#define IEP_GLOBAL_CFG_COMPEN_INC_MASK GENMASK(19, 8) +#define IEP_GLOBAL_CFG_COMPEN_INC_SHIFT 8 + +#define IEP_GLOBAL_STATUS_CNT_OVF BIT(0) + +#define CMP_INDEX(sync) ((sync) + 1) +#define IEP_CMP_CFG_SHADOW_EN BIT(17) +#define IEP_CMP_CFG_CMP0_RST_CNT_EN BIT(0) +#define IEP_CMP_CFG_CMP_EN(cmp) (GENMASK(16, 1) & (1 << ((cmp) + 1))) + +#define IEP_CMP_STATUS(cmp) (1 << (cmp)) + +#define IEP_SYNC_CTRL_SYNC_EN BIT(0) +#define IEP_SYNC_CTRL_SYNC_N_EN(n) (GENMASK(2, 1) & (BIT(1) << (n))) + +#define IEP_MIN_CMP 0 +#define IEP_MAX_CMP 15 + +#define ICSS_IEP_64BIT_COUNTER_SUPPORT BIT(0) +#define ICSS_IEP_SLOW_COMPEN_REG_SUPPORT BIT(1) +#define ICSS_IEP_SHADOW_MODE_SUPPORT BIT(2) + +#define LATCH_INDEX(ts_index) ((ts_index) + 6) +#define IEP_CAP_CFG_CAPNR_1ST_EVENT_EN(n) BIT(LATCH_INDEX(n)) +#define IEP_CAP_CFG_CAPNF_1ST_EVENT_EN(n) BIT(LATCH_INDEX(n) + 1) +#define IEP_CAP_CFG_CAP_ASYNC_EN(n) BIT(LATCH_INDEX(n) + 10) + +enum { + ICSS_IEP_GLOBAL_CFG_REG, + ICSS_IEP_GLOBAL_STATUS_REG, + ICSS_IEP_COMPEN_REG, + ICSS_IEP_SLOW_COMPEN_REG, + ICSS_IEP_COUNT_REG0, + ICSS_IEP_COUNT_REG1, + ICSS_IEP_CAPTURE_CFG_REG, + ICSS_IEP_CAPTURE_STAT_REG, + + ICSS_IEP_CAP6_RISE_REG0, + ICSS_IEP_CAP6_RISE_REG1, + + ICSS_IEP_CAP7_RISE_REG0, + ICSS_IEP_CAP7_RISE_REG1, + + ICSS_IEP_CMP_CFG_REG, + ICSS_IEP_CMP_STAT_REG, + ICSS_IEP_CMP0_REG0, + ICSS_IEP_CMP0_REG1, + ICSS_IEP_CMP1_REG0, + ICSS_IEP_CMP1_REG1, + + ICSS_IEP_CMP8_REG0, + ICSS_IEP_CMP8_REG1, + ICSS_IEP_SYNC_CTRL_REG, + ICSS_IEP_SYNC0_STAT_REG, + ICSS_IEP_SYNC1_STAT_REG, + ICSS_IEP_SYNC_PWIDTH_REG, + ICSS_IEP_SYNC0_PERIOD_REG, + ICSS_IEP_SYNC1_DELAY_REG, + ICSS_IEP_SYNC_START_REG, + ICSS_IEP_MAX_REGS, +}; + +/** + * struct icss_iep_plat_data - Plat data to handle SoC variants + * @config: Regmap configuration data + * @reg_offs: register offsets to capture offset differences across SoCs + * @flags: Flags to represent IEP properties + */ +struct icss_iep_plat_data { + struct regmap_config *config; + u32 reg_offs[ICSS_IEP_MAX_REGS]; + u32 flags; +}; + +struct icss_iep { + struct device *dev; + void __iomem *base; + const struct icss_iep_plat_data *plat_data; + struct regmap *map; + struct device_node *client_np; + unsigned long refclk_freq; + int clk_tick_time; /* one refclk tick time in ns */ + struct ptp_clock_info ptp_info; + struct ptp_clock *ptp_clock; + struct mutex ptp_clk_mutex; /* PHC access serializer */ + spinlock_t irq_lock; /* CMP IRQ vs icss_iep_ptp_enable access */ + u32 def_inc; + s16 slow_cmp_inc; + u32 slow_cmp_count; + const struct icss_iep_clockops *ops; + void *clockops_data; + u32 cycle_time_ns; + u32 perout_enabled; + bool pps_enabled; + int cap_cmp_irq; + u64 period; + u32 latch_enable; +}; + +static u32 icss_iep_readl(struct icss_iep *iep, int reg) +{ + return readl(iep->base + iep->plat_data->reg_offs[reg]); +} + +static void icss_iep_writel(struct icss_iep *iep, int reg, u32 val) +{ + return writel(val, iep->base + iep->plat_data->reg_offs[reg]); +} + +/** + * icss_iep_get_count_hi() - Get the upper 32 bit IEP counter + * @iep: Pointer to structure representing IEP. + * + * Return: upper 32 bit IEP counter + */ +int icss_iep_get_count_hi(struct icss_iep *iep) +{ + u32 val = 0; + + if (iep && (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT)) + val = icss_iep_readl(iep, ICSS_IEP_COUNT_REG1); + + return val; +} +EXPORT_SYMBOL_GPL(icss_iep_get_count_hi); + +/** + * icss_iep_get_count_low() - Get the lower 32 bit IEP counter + * @iep: Pointer to structure representing IEP. + * + * Return: lower 32 bit IEP counter + */ +int icss_iep_get_count_low(struct icss_iep *iep) +{ + u32 val = 0; + + if (iep) + val = icss_iep_readl(iep, ICSS_IEP_COUNT_REG0); + + return val; +} +EXPORT_SYMBOL_GPL(icss_iep_get_count_low); + +/** + * icss_iep_get_ptp_clock_idx() - Get PTP clock index using IEP driver + * @iep: Pointer to structure representing IEP. + * + * Return: PTP clock index, -1 if not registered + */ +int icss_iep_get_ptp_clock_idx(struct icss_iep *iep) +{ + if (!iep || !iep->ptp_clock) + return -1; + return ptp_clock_index(iep->ptp_clock); +} +EXPORT_SYMBOL_GPL(icss_iep_get_ptp_clock_idx); + +static void icss_iep_set_counter(struct icss_iep *iep, u64 ns) +{ + if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) + icss_iep_writel(iep, ICSS_IEP_COUNT_REG1, upper_32_bits(ns)); + icss_iep_writel(iep, ICSS_IEP_COUNT_REG0, lower_32_bits(ns)); +} + +static void icss_iep_update_to_next_boundary(struct icss_iep *iep, u64 start_ns); + +static void icss_iep_settime(struct icss_iep *iep, u64 ns) +{ + unsigned long flags; + + if (iep->ops && iep->ops->settime) { + iep->ops->settime(iep->clockops_data, ns); + return; + } + + spin_lock_irqsave(&iep->irq_lock, flags); + if (iep->pps_enabled || iep->perout_enabled) + icss_iep_writel(iep, ICSS_IEP_SYNC_CTRL_REG, 0); + + icss_iep_set_counter(iep, ns); + + if (iep->pps_enabled || iep->perout_enabled) { + icss_iep_update_to_next_boundary(iep, ns); + icss_iep_writel(iep, ICSS_IEP_SYNC_CTRL_REG, + IEP_SYNC_CTRL_SYNC_N_EN(0) | + IEP_SYNC_CTRL_SYNC_EN); + } + spin_unlock_irqrestore(&iep->irq_lock, flags); +} + +static u64 icss_iep_gettime(struct icss_iep *iep, + struct ptp_system_timestamp *sts) +{ + u32 ts_hi = 0, ts_lo; + unsigned long flags; + + if (iep->ops && iep->ops->gettime) + return iep->ops->gettime(iep->clockops_data, sts); + + /* use local_irq_x() to make it work for both RT/non-RT */ + local_irq_save(flags); + + /* no need to play with hi-lo, hi is latched when lo is read */ + ptp_read_system_prets(sts); + ts_lo = icss_iep_readl(iep, ICSS_IEP_COUNT_REG0); + ptp_read_system_postts(sts); + if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) + ts_hi = icss_iep_readl(iep, ICSS_IEP_COUNT_REG1); + + local_irq_restore(flags); + + return (u64)ts_lo | (u64)ts_hi << 32; +} + +static void icss_iep_enable(struct icss_iep *iep) +{ + regmap_update_bits(iep->map, ICSS_IEP_GLOBAL_CFG_REG, + IEP_GLOBAL_CFG_CNT_ENABLE, + IEP_GLOBAL_CFG_CNT_ENABLE); +} + +static void icss_iep_disable(struct icss_iep *iep) +{ + regmap_update_bits(iep->map, ICSS_IEP_GLOBAL_CFG_REG, + IEP_GLOBAL_CFG_CNT_ENABLE, + 0); +} + +static void icss_iep_enable_shadow_mode(struct icss_iep *iep) +{ + u32 cycle_time; + int cmp; + + cycle_time = iep->cycle_time_ns - iep->def_inc; + + icss_iep_disable(iep); + + /* disable shadow mode */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_SHADOW_EN, 0); + + /* enable shadow mode */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_SHADOW_EN, IEP_CMP_CFG_SHADOW_EN); + + /* clear counters */ + icss_iep_set_counter(iep, 0); + + /* clear overflow status */ + regmap_update_bits(iep->map, ICSS_IEP_GLOBAL_STATUS_REG, + IEP_GLOBAL_STATUS_CNT_OVF, + IEP_GLOBAL_STATUS_CNT_OVF); + + /* clear compare status */ + for (cmp = IEP_MIN_CMP; cmp < IEP_MAX_CMP; cmp++) { + regmap_update_bits(iep->map, ICSS_IEP_CMP_STAT_REG, + IEP_CMP_STATUS(cmp), IEP_CMP_STATUS(cmp)); + } + + /* enable reset counter on CMP0 event */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_CMP0_RST_CNT_EN, + IEP_CMP_CFG_CMP0_RST_CNT_EN); + /* enable compare */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_CMP_EN(0), + IEP_CMP_CFG_CMP_EN(0)); + + /* set CMP0 value to cycle time */ + regmap_write(iep->map, ICSS_IEP_CMP0_REG0, cycle_time); + if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) + regmap_write(iep->map, ICSS_IEP_CMP0_REG1, cycle_time); + + icss_iep_set_counter(iep, 0); + icss_iep_enable(iep); +} + +static void icss_iep_set_default_inc(struct icss_iep *iep, u8 def_inc) +{ + regmap_update_bits(iep->map, ICSS_IEP_GLOBAL_CFG_REG, + IEP_GLOBAL_CFG_DEFAULT_INC_MASK, + def_inc << IEP_GLOBAL_CFG_DEFAULT_INC_SHIFT); +} + +static void icss_iep_set_compensation_inc(struct icss_iep *iep, u16 compen_inc) +{ + struct device *dev = regmap_get_device(iep->map); + + if (compen_inc > IEP_MAX_COMPEN_INC) { + dev_err(dev, "%s: too high compensation inc %d\n", + __func__, compen_inc); + compen_inc = IEP_MAX_COMPEN_INC; + } + + regmap_update_bits(iep->map, ICSS_IEP_GLOBAL_CFG_REG, + IEP_GLOBAL_CFG_COMPEN_INC_MASK, + compen_inc << IEP_GLOBAL_CFG_COMPEN_INC_SHIFT); +} + +static void icss_iep_set_compensation_count(struct icss_iep *iep, + u32 compen_count) +{ + struct device *dev = regmap_get_device(iep->map); + + if (compen_count > IEP_MAX_COMPEN_COUNT) { + dev_err(dev, "%s: too high compensation count %d\n", + __func__, compen_count); + compen_count = IEP_MAX_COMPEN_COUNT; + } + + regmap_write(iep->map, ICSS_IEP_COMPEN_REG, compen_count); +} + +static void icss_iep_set_slow_compensation_count(struct icss_iep *iep, + u32 compen_count) +{ + regmap_write(iep->map, ICSS_IEP_SLOW_COMPEN_REG, compen_count); +} + +/* PTP PHC operations */ +static int icss_iep_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) +{ + struct icss_iep *iep = container_of(ptp, struct icss_iep, ptp_info); + s32 ppb = scaled_ppm_to_ppb(scaled_ppm); + u32 cyc_count; + u16 cmp_inc; + + mutex_lock(&iep->ptp_clk_mutex); + + /* ppb is amount of frequency we want to adjust in 1GHz (billion) + * e.g. 100ppb means we need to speed up clock by 100Hz + * i.e. at end of 1 second (1 billion ns) clock time, we should be + * counting 100 more ns. + * We use IEP slow compensation to achieve continuous freq. adjustment. + * There are 2 parts. Cycle time and adjustment per cycle. + * Simplest case would be 1 sec Cycle time. Then adjustment + * pre cycle would be (def_inc + ppb) value. + * Cycle time will have to be chosen based on how worse the ppb is. + * e.g. smaller the ppb, cycle time has to be large. + * The minimum adjustment we can do is +-1ns per cycle so let's + * reduce the cycle time to get 1ns per cycle adjustment. + * 1ppb = 1sec cycle time & 1ns adjust + * 1000ppb = 1/1000 cycle time & 1ns adjust per cycle + */ + + if (iep->cycle_time_ns) + iep->slow_cmp_inc = iep->clk_tick_time; /* 4ns adj per cycle */ + else + iep->slow_cmp_inc = 1; /* 1ns adjust per cycle */ + + if (ppb < 0) { + iep->slow_cmp_inc = -iep->slow_cmp_inc; + ppb = -ppb; + } + + cyc_count = NSEC_PER_SEC; /* 1s cycle time @1GHz */ + cyc_count /= ppb; /* cycle time per ppb */ + + /* slow_cmp_count is decremented every clock cycle, e.g. @250MHz */ + if (!iep->cycle_time_ns) + cyc_count /= iep->clk_tick_time; + iep->slow_cmp_count = cyc_count; + + /* iep->clk_tick_time is def_inc */ + cmp_inc = iep->clk_tick_time + iep->slow_cmp_inc; + icss_iep_set_compensation_inc(iep, cmp_inc); + icss_iep_set_slow_compensation_count(iep, iep->slow_cmp_count); + + mutex_unlock(&iep->ptp_clk_mutex); + + return 0; +} + +static int icss_iep_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct icss_iep *iep = container_of(ptp, struct icss_iep, ptp_info); + s64 ns; + + mutex_lock(&iep->ptp_clk_mutex); + if (iep->ops && iep->ops->adjtime) { + iep->ops->adjtime(iep->clockops_data, delta); + } else { + ns = icss_iep_gettime(iep, NULL); + ns += delta; + icss_iep_settime(iep, ns); + } + mutex_unlock(&iep->ptp_clk_mutex); + + return 0; +} + +static int icss_iep_ptp_gettimeex(struct ptp_clock_info *ptp, + struct timespec64 *ts, + struct ptp_system_timestamp *sts) +{ + struct icss_iep *iep = container_of(ptp, struct icss_iep, ptp_info); + u64 ns; + + mutex_lock(&iep->ptp_clk_mutex); + ns = icss_iep_gettime(iep, sts); + *ts = ns_to_timespec64(ns); + mutex_unlock(&iep->ptp_clk_mutex); + + return 0; +} + +static int icss_iep_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct icss_iep *iep = container_of(ptp, struct icss_iep, ptp_info); + u64 ns; + + mutex_lock(&iep->ptp_clk_mutex); + ns = timespec64_to_ns(ts); + icss_iep_settime(iep, ns); + mutex_unlock(&iep->ptp_clk_mutex); + + return 0; +} + +static void icss_iep_update_to_next_boundary(struct icss_iep *iep, u64 start_ns) +{ + u64 ns, p_ns; + u32 offset; + + ns = icss_iep_gettime(iep, NULL); + if (start_ns < ns) + start_ns = ns; + p_ns = iep->period; + /* Round up to next period boundary */ + start_ns += p_ns - 1; + offset = do_div(start_ns, p_ns); + start_ns = start_ns * p_ns; + /* If it is too close to update, shift to next boundary */ + if (p_ns - offset < 10) + start_ns += p_ns; + + regmap_write(iep->map, ICSS_IEP_CMP1_REG0, lower_32_bits(start_ns)); + if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) + regmap_write(iep->map, ICSS_IEP_CMP1_REG1, upper_32_bits(start_ns)); +} + +static int icss_iep_perout_enable_hw(struct icss_iep *iep, + struct ptp_perout_request *req, int on) +{ + int ret; + u64 cmp; + + if (iep->ops && iep->ops->perout_enable) { + ret = iep->ops->perout_enable(iep->clockops_data, req, on, &cmp); + if (ret) + return ret; + + if (on) { + /* Configure CMP */ + regmap_write(iep->map, ICSS_IEP_CMP1_REG0, lower_32_bits(cmp)); + if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) + regmap_write(iep->map, ICSS_IEP_CMP1_REG1, upper_32_bits(cmp)); + /* Configure SYNC, 1ms pulse width */ + regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, 1000000); + regmap_write(iep->map, ICSS_IEP_SYNC0_PERIOD_REG, 0); + regmap_write(iep->map, ICSS_IEP_SYNC_START_REG, 0); + regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, 0); /* one-shot mode */ + /* Enable CMP 1 */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_CMP_EN(1), IEP_CMP_CFG_CMP_EN(1)); + } else { + /* Disable CMP 1 */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_CMP_EN(1), 0); + + /* clear regs */ + regmap_write(iep->map, ICSS_IEP_CMP1_REG0, 0); + if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) + regmap_write(iep->map, ICSS_IEP_CMP1_REG1, 0); + } + } else { + if (on) { + u64 start_ns; + + iep->period = ((u64)req->period.sec * NSEC_PER_SEC) + + req->period.nsec; + start_ns = ((u64)req->period.sec * NSEC_PER_SEC) + + req->period.nsec; + icss_iep_update_to_next_boundary(iep, start_ns); + + /* Enable Sync in single shot mode */ + regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, + IEP_SYNC_CTRL_SYNC_N_EN(0) | IEP_SYNC_CTRL_SYNC_EN); + /* Enable CMP 1 */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_CMP_EN(1), IEP_CMP_CFG_CMP_EN(1)); + } else { + /* Disable CMP 1 */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_CMP_EN(1), 0); + + /* clear CMP regs */ + regmap_write(iep->map, ICSS_IEP_CMP1_REG0, 0); + if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) + regmap_write(iep->map, ICSS_IEP_CMP1_REG1, 0); + + /* Disable sync */ + regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, 0); + } + } + + return 0; +} + +static int icss_iep_perout_enable(struct icss_iep *iep, + struct ptp_perout_request *req, int on) +{ + unsigned long flags; + int ret = 0; + + mutex_lock(&iep->ptp_clk_mutex); + + if (iep->pps_enabled) { + ret = -EBUSY; + goto exit; + } + + if (iep->perout_enabled == !!on) + goto exit; + + spin_lock_irqsave(&iep->irq_lock, flags); + ret = icss_iep_perout_enable_hw(iep, req, on); + if (!ret) + iep->perout_enabled = !!on; + spin_unlock_irqrestore(&iep->irq_lock, flags); + +exit: + mutex_unlock(&iep->ptp_clk_mutex); + + return ret; +} + +static int icss_iep_pps_enable(struct icss_iep *iep, int on) +{ + struct ptp_clock_request rq; + struct timespec64 ts; + unsigned long flags; + int ret = 0; + u64 ns; + + mutex_lock(&iep->ptp_clk_mutex); + + if (iep->perout_enabled) { + ret = -EBUSY; + goto exit; + } + + if (iep->pps_enabled == !!on) + goto exit; + + spin_lock_irqsave(&iep->irq_lock, flags); + + rq.perout.index = 0; + if (on) { + ns = icss_iep_gettime(iep, NULL); + ts = ns_to_timespec64(ns); + rq.perout.period.sec = 1; + rq.perout.period.nsec = 0; + rq.perout.start.sec = ts.tv_sec + 2; + rq.perout.start.nsec = 0; + ret = icss_iep_perout_enable_hw(iep, &rq.perout, on); + } else { + ret = icss_iep_perout_enable_hw(iep, &rq.perout, on); + } + + if (!ret) + iep->pps_enabled = !!on; + + spin_unlock_irqrestore(&iep->irq_lock, flags); + +exit: + mutex_unlock(&iep->ptp_clk_mutex); + + return ret; +} + +static int icss_iep_extts_enable(struct icss_iep *iep, u32 index, int on) +{ + u32 val, cap, ret = 0; + + mutex_lock(&iep->ptp_clk_mutex); + + if (iep->ops && iep->ops->extts_enable) { + ret = iep->ops->extts_enable(iep->clockops_data, index, on); + goto exit; + } + + if (!!(iep->latch_enable & BIT(index)) == !!on) + goto exit; + + regmap_read(iep->map, ICSS_IEP_CAPTURE_CFG_REG, &val); + cap = IEP_CAP_CFG_CAP_ASYNC_EN(index) | IEP_CAP_CFG_CAPNR_1ST_EVENT_EN(index); + if (on) { + val |= cap; + iep->latch_enable |= BIT(index); + } else { + val &= ~cap; + iep->latch_enable &= ~BIT(index); + } + regmap_write(iep->map, ICSS_IEP_CAPTURE_CFG_REG, val); + +exit: + mutex_unlock(&iep->ptp_clk_mutex); + + return ret; +} + +static int icss_iep_ptp_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) +{ + struct icss_iep *iep = container_of(ptp, struct icss_iep, ptp_info); + + switch (rq->type) { + case PTP_CLK_REQ_PEROUT: + return icss_iep_perout_enable(iep, &rq->perout, on); + case PTP_CLK_REQ_PPS: + return icss_iep_pps_enable(iep, on); + case PTP_CLK_REQ_EXTTS: + return icss_iep_extts_enable(iep, rq->extts.index, on); + default: + break; + } + + return -EOPNOTSUPP; +} + +static struct ptp_clock_info icss_iep_ptp_info = { + .owner = THIS_MODULE, + .name = "ICSS IEP timer", + .max_adj = 10000000, + .adjfine = icss_iep_ptp_adjfine, + .adjtime = icss_iep_ptp_adjtime, + .gettimex64 = icss_iep_ptp_gettimeex, + .settime64 = icss_iep_ptp_settime, + .enable = icss_iep_ptp_enable, +}; + +struct icss_iep *icss_iep_get_idx(struct device_node *np, int idx) +{ + struct platform_device *pdev; + struct device_node *iep_np; + struct icss_iep *iep; + + iep_np = of_parse_phandle(np, "ti,iep", idx); + if (!iep_np || !of_device_is_available(iep_np)) + return ERR_PTR(-ENODEV); + + pdev = of_find_device_by_node(iep_np); + of_node_put(iep_np); + + if (!pdev) + /* probably IEP not yet probed */ + return ERR_PTR(-EPROBE_DEFER); + + iep = platform_get_drvdata(pdev); + if (!iep) + return ERR_PTR(-EPROBE_DEFER); + + device_lock(iep->dev); + if (iep->client_np) { + device_unlock(iep->dev); + dev_err(iep->dev, "IEP is already acquired by %s", + iep->client_np->name); + return ERR_PTR(-EBUSY); + } + iep->client_np = np; + device_unlock(iep->dev); + get_device(iep->dev); + + return iep; +} +EXPORT_SYMBOL_GPL(icss_iep_get_idx); + +struct icss_iep *icss_iep_get(struct device_node *np) +{ + return icss_iep_get_idx(np, 0); +} +EXPORT_SYMBOL_GPL(icss_iep_get); + +void icss_iep_put(struct icss_iep *iep) +{ + device_lock(iep->dev); + iep->client_np = NULL; + device_unlock(iep->dev); + put_device(iep->dev); +} +EXPORT_SYMBOL_GPL(icss_iep_put); + +int icss_iep_init(struct icss_iep *iep, const struct icss_iep_clockops *clkops, + void *clockops_data, u32 cycle_time_ns) +{ + int ret = 0; + + iep->cycle_time_ns = cycle_time_ns; + iep->clk_tick_time = iep->def_inc; + iep->ops = clkops; + iep->clockops_data = clockops_data; + icss_iep_set_default_inc(iep, iep->def_inc); + icss_iep_set_compensation_inc(iep, iep->def_inc); + icss_iep_set_compensation_count(iep, 0); + regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, iep->refclk_freq / 10); /* 100 ms pulse */ + regmap_write(iep->map, ICSS_IEP_SYNC0_PERIOD_REG, 0); + if (iep->plat_data->flags & ICSS_IEP_SLOW_COMPEN_REG_SUPPORT) + icss_iep_set_slow_compensation_count(iep, 0); + + if (!(iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) || + !(iep->plat_data->flags & ICSS_IEP_SLOW_COMPEN_REG_SUPPORT)) + goto skip_perout; + + if (iep->ops && iep->ops->perout_enable) { + iep->ptp_info.n_per_out = 1; + iep->ptp_info.pps = 1; + } + + if (iep->ops && iep->ops->extts_enable) + iep->ptp_info.n_ext_ts = 2; + +skip_perout: + if (cycle_time_ns) + icss_iep_enable_shadow_mode(iep); + else + icss_iep_enable(iep); + icss_iep_settime(iep, ktime_get_real_ns()); + + iep->ptp_clock = ptp_clock_register(&iep->ptp_info, iep->dev); + if (IS_ERR(iep->ptp_clock)) { + ret = PTR_ERR(iep->ptp_clock); + iep->ptp_clock = NULL; + dev_err(iep->dev, "Failed to register ptp clk %d\n", ret); + } + + return ret; +} +EXPORT_SYMBOL_GPL(icss_iep_init); + +int icss_iep_exit(struct icss_iep *iep) +{ + if (iep->ptp_clock) { + ptp_clock_unregister(iep->ptp_clock); + iep->ptp_clock = NULL; + } + icss_iep_disable(iep); + + return 0; +} +EXPORT_SYMBOL_GPL(icss_iep_exit); + +static const struct of_device_id icss_iep_of_match[]; + +static int icss_iep_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct icss_iep *iep; + struct clk *iep_clk; + + iep = devm_kzalloc(dev, sizeof(*iep), GFP_KERNEL); + if (!iep) + return -ENOMEM; + + iep->dev = dev; + iep->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(iep->base)) + return -ENODEV; + + iep_clk = devm_clk_get(dev, NULL); + if (IS_ERR(iep_clk)) + return PTR_ERR(iep_clk); + + iep->refclk_freq = clk_get_rate(iep_clk); + + iep->def_inc = NSEC_PER_SEC / iep->refclk_freq; /* ns per clock tick */ + if (iep->def_inc > IEP_MAX_DEF_INC) { + dev_err(dev, "Failed to set def_inc %d. IEP_clock is too slow to be supported\n", + iep->def_inc); + return -EINVAL; + } + + iep->plat_data = of_device_get_match_data(dev); + if (!iep->plat_data) + return -EINVAL; + + iep->map = devm_regmap_init(dev, NULL, iep, iep->plat_data->config); + if (IS_ERR(iep->map)) { + dev_err(dev, "Failed to create regmap for IEP %ld\n", + PTR_ERR(iep->map)); + return PTR_ERR(iep->map); + } + + iep->ptp_info = icss_iep_ptp_info; + mutex_init(&iep->ptp_clk_mutex); + spin_lock_init(&iep->irq_lock); + dev_set_drvdata(dev, iep); + icss_iep_disable(iep); + + return 0; +} + +static bool am654_icss_iep_valid_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ICSS_IEP_GLOBAL_CFG_REG ... ICSS_IEP_SYNC_START_REG: + return true; + default: + return false; + } + + return false; +} + +static int icss_iep_regmap_write(void *context, unsigned int reg, + unsigned int val) +{ + struct icss_iep *iep = context; + + writel(val, iep->base + iep->plat_data->reg_offs[reg]); + + return 0; +} + +static int icss_iep_regmap_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct icss_iep *iep = context; + + *val = readl(iep->base + iep->plat_data->reg_offs[reg]); + + return 0; +} + +static struct regmap_config am654_icss_iep_regmap_config = { + .name = "icss iep", + .reg_stride = 1, + .reg_write = icss_iep_regmap_write, + .reg_read = icss_iep_regmap_read, + .writeable_reg = am654_icss_iep_valid_reg, + .readable_reg = am654_icss_iep_valid_reg, + .fast_io = 1, +}; + +static const struct icss_iep_plat_data am654_icss_iep_plat_data = { + .flags = ICSS_IEP_64BIT_COUNTER_SUPPORT | + ICSS_IEP_SLOW_COMPEN_REG_SUPPORT | + ICSS_IEP_SHADOW_MODE_SUPPORT, + .reg_offs = { + [ICSS_IEP_GLOBAL_CFG_REG] = 0x00, + [ICSS_IEP_COMPEN_REG] = 0x08, + [ICSS_IEP_SLOW_COMPEN_REG] = 0x0C, + [ICSS_IEP_COUNT_REG0] = 0x10, + [ICSS_IEP_COUNT_REG1] = 0x14, + [ICSS_IEP_CAPTURE_CFG_REG] = 0x18, + [ICSS_IEP_CAPTURE_STAT_REG] = 0x1c, + + [ICSS_IEP_CAP6_RISE_REG0] = 0x50, + [ICSS_IEP_CAP6_RISE_REG1] = 0x54, + + [ICSS_IEP_CAP7_RISE_REG0] = 0x60, + [ICSS_IEP_CAP7_RISE_REG1] = 0x64, + + [ICSS_IEP_CMP_CFG_REG] = 0x70, + [ICSS_IEP_CMP_STAT_REG] = 0x74, + [ICSS_IEP_CMP0_REG0] = 0x78, + [ICSS_IEP_CMP0_REG1] = 0x7c, + [ICSS_IEP_CMP1_REG0] = 0x80, + [ICSS_IEP_CMP1_REG1] = 0x84, + + [ICSS_IEP_CMP8_REG0] = 0xc0, + [ICSS_IEP_CMP8_REG1] = 0xc4, + [ICSS_IEP_SYNC_CTRL_REG] = 0x180, + [ICSS_IEP_SYNC0_STAT_REG] = 0x188, + [ICSS_IEP_SYNC1_STAT_REG] = 0x18c, + [ICSS_IEP_SYNC_PWIDTH_REG] = 0x190, + [ICSS_IEP_SYNC0_PERIOD_REG] = 0x194, + [ICSS_IEP_SYNC1_DELAY_REG] = 0x198, + [ICSS_IEP_SYNC_START_REG] = 0x19c, + }, + .config = &am654_icss_iep_regmap_config, +}; + +static const struct of_device_id icss_iep_of_match[] = { + { + .compatible = "ti,am654-icss-iep", + .data = &am654_icss_iep_plat_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, icss_iep_of_match); + +static struct platform_driver icss_iep_driver = { + .driver = { + .name = "icss-iep", + .of_match_table = of_match_ptr(icss_iep_of_match), + }, + .probe = icss_iep_probe, +}; +module_platform_driver(icss_iep_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TI ICSS IEP driver"); +MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); +MODULE_AUTHOR("Md Danish Anwar <danishanwar@ti.com>"); diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.h b/drivers/net/ethernet/ti/icssg/icss_iep.h new file mode 100644 index 000000000000..9eee44ae4990 --- /dev/null +++ b/drivers/net/ethernet/ti/icssg/icss_iep.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Texas Instruments ICSSG Industrial Ethernet Peripheral (IEP) Driver + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * + */ + +#ifndef __NET_TI_ICSS_IEP_H +#define __NET_TI_ICSS_IEP_H + +#include <linux/mutex.h> +#include <linux/ptp_clock_kernel.h> +#include <linux/regmap.h> + +struct icss_iep; + +/* Firmware specific clock operations */ +struct icss_iep_clockops { + void (*settime)(void *clockops_data, u64 ns); + void (*adjtime)(void *clockops_data, s64 delta); + u64 (*gettime)(void *clockops_data, struct ptp_system_timestamp *sts); + int (*perout_enable)(void *clockops_data, + struct ptp_perout_request *req, int on, + u64 *cmp); + int (*extts_enable)(void *clockops_data, u32 index, int on); +}; + +struct icss_iep *icss_iep_get(struct device_node *np); +struct icss_iep *icss_iep_get_idx(struct device_node *np, int idx); +void icss_iep_put(struct icss_iep *iep); +int icss_iep_init(struct icss_iep *iep, const struct icss_iep_clockops *clkops, + void *clockops_data, u32 cycle_time_ns); +int icss_iep_exit(struct icss_iep *iep); +int icss_iep_get_count_low(struct icss_iep *iep); +int icss_iep_get_count_hi(struct icss_iep *iep); +int icss_iep_get_ptp_clock_idx(struct icss_iep *iep); + +#endif /* __NET_TI_ICSS_IEP_H */