| Message ID | 20230730184120.94984-1-david@ixit.cz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: mxsfb: Exclude i.MX8MQ from power-domains requirement | expand |
Hi, On Sun, Jul 30, 2023 at 09:41:20PM +0300, David Heidelberg wrote: > i.MX8MQ uses as secondary compatible fsl,imx6sx-lcdif, which triggers > requirement of power-domains, thou it's not required. > > Fixes: f62678a77d58 ("dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property") > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > .../devicetree/bindings/display/fsl,lcdif.yaml | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > index fc11ab5fc465..2d868276b0f9 100644 > --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > @@ -129,8 +129,15 @@ allOf: > - fsl,imx8mp-lcdif > - fsl,imx93-lcdif > then: > - required: > - - power-domains > + if: > + properties: > + compatible: > + not: > + contains: > + const: fsl,imx8mq-lcdif > + then: > + required: > + - power-domains We currently enable the mipi power domain for the mipi dphy and nwl bridge only but not for LCDIF itself assuming it's not needed (as there's other outputs LCDIF can drive). I *think* this is correct but maybe Marek or Liu can confirm? Cheers, -- Guido > > examples: > - | > -- > 2.40.1 >
On Wed, Aug 02, 2023 at 11:51:17AM +0200, Guido Günther wrote: > Hi, > On Sun, Jul 30, 2023 at 09:41:20PM +0300, David Heidelberg wrote: > > i.MX8MQ uses as secondary compatible fsl,imx6sx-lcdif, which triggers > > requirement of power-domains, thou it's not required. > > > > Fixes: f62678a77d58 ("dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property") > > > > Signed-off-by: David Heidelberg <david@ixit.cz> > > --- > > .../devicetree/bindings/display/fsl,lcdif.yaml | 11 +++++++++-- > > 1 file changed, 9 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > > index fc11ab5fc465..2d868276b0f9 100644 > > --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > > +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > > @@ -129,8 +129,15 @@ allOf: > > - fsl,imx8mp-lcdif > > - fsl,imx93-lcdif > > then: > > - required: > > - - power-domains > > + if: > > + properties: > > + compatible: > > + not: > > + contains: > > + const: fsl,imx8mq-lcdif > > + then: > > + required: > > + - power-domains > > We currently enable the mipi power domain for the mipi dphy and nwl > bridge only but not for LCDIF itself assuming it's not needed (as there's > other outputs LCDIF can drive). I *think* this is correct but maybe > Marek or Liu can confirm? I'm happy to Ack this, but I've been sitting on it waiting to see if Marek or Liu popped up..
On 8/10/23 21:30, Conor Dooley wrote: > On Wed, Aug 02, 2023 at 11:51:17AM +0200, Guido Günther wrote: >> Hi, >> On Sun, Jul 30, 2023 at 09:41:20PM +0300, David Heidelberg wrote: >>> i.MX8MQ uses as secondary compatible fsl,imx6sx-lcdif, which triggers >>> requirement of power-domains, thou it's not required. >>> >>> Fixes: f62678a77d58 ("dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property") >>> >>> Signed-off-by: David Heidelberg <david@ixit.cz> >>> --- >>> .../devicetree/bindings/display/fsl,lcdif.yaml | 11 +++++++++-- >>> 1 file changed, 9 insertions(+), 2 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml >>> index fc11ab5fc465..2d868276b0f9 100644 >>> --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml >>> +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml >>> @@ -129,8 +129,15 @@ allOf: >>> - fsl,imx8mp-lcdif >>> - fsl,imx93-lcdif >>> then: >>> - required: >>> - - power-domains >>> + if: >>> + properties: >>> + compatible: >>> + not: >>> + contains: >>> + const: fsl,imx8mq-lcdif >>> + then: >>> + required: >>> + - power-domains >> >> We currently enable the mipi power domain for the mipi dphy and nwl >> bridge only but not for LCDIF itself assuming it's not needed (as there's >> other outputs LCDIF can drive). I *think* this is correct but maybe >> Marek or Liu can confirm? > > I'm happy to Ack this, but I've been sitting on it waiting to see if > Marek or Liu popped up.. I don't see anything which would resemble power domains like on MX8MM/N/P on the MQ MXSFB, there are such domains for the VPU and DCSS, but not MXSFB. So Reviewed-by: Marek Vasut <marex@denx.de>
On Friday, August 11, 2023 3:30 AM Conor Dooley <conor@kernel.org> wrote: > > On Wed, Aug 02, 2023 at 11:51:17AM +0200, Guido Günther wrote: > > Hi, > > On Sun, Jul 30, 2023 at 09:41:20PM +0300, David Heidelberg wrote: > > > i.MX8MQ uses as secondary compatible fsl,imx6sx-lcdif, which triggers > > > requirement of power-domains, thou it's not required. > > > > > > Fixes: f62678a77d58 ("dt-bindings: mxsfb: Document > i.MX8M/i.MX6SX/i.MX6SL power-domains property") > > > > > > Signed-off-by: David Heidelberg <david@ixit.cz> > > > --- > > > .../devicetree/bindings/display/fsl,lcdif.yaml | 11 +++++++++-- > > > 1 file changed, 9 insertions(+), 2 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > > > index fc11ab5fc465..2d868276b0f9 100644 > > > --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > > > +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > > > @@ -129,8 +129,15 @@ allOf: > > > - fsl,imx8mp-lcdif > > > - fsl,imx93-lcdif > > > then: > > > - required: > > > - - power-domains > > > + if: > > > + properties: > > > + compatible: > > > + not: > > > + contains: > > > + const: fsl,imx8mq-lcdif > > > + then: > > > + required: > > > + - power-domains > > > > We currently enable the mipi power domain for the mipi dphy and nwl > > bridge only but not for LCDIF itself assuming it's not needed (as there's > > other outputs LCDIF can drive). I *think* this is correct but maybe > > Marek or Liu can confirm? > > I'm happy to Ack this, but I've been sitting on it waiting to see if > Marek or Liu popped up.. I see DCSS and HDMI controller/PHY sit in displaymix in a system bus diagram(internal only), but LCDIF and MIPI DSI controller/PHY are not in that mix. So, it seems that the "gpc_disp" power domain defined in imx8mq.dtsi supplies power for DCSS and HDMI controller/PHY only, though nxp,imx8mq-dcss.yaml doesn't even allow a "power-domains" property... Assuming that system bus diagram is correct and "gpc_disp" power domain does supply power for everything in displaymix only: Reviewed-by: Liu Ying <victor.liu@nxp.com> P.s., there are still a few warnings from dtbs-check, see build log[1]. Hope they can be addressed... [1] https://gitlab.com/robherring/dt-review-ci/-/jobs/4767324570/artifacts/raw/build-dtbs-1814673.log Liu Ying
On Thu, Aug 10, 2023 at 08:30:21PM +0100, Conor Dooley wrote: > On Wed, Aug 02, 2023 at 11:51:17AM +0200, Guido Günther wrote: > > Hi, > > On Sun, Jul 30, 2023 at 09:41:20PM +0300, David Heidelberg wrote: > > > i.MX8MQ uses as secondary compatible fsl,imx6sx-lcdif, which triggers > > > requirement of power-domains, thou it's not required. > > > > > > Fixes: f62678a77d58 ("dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property") > > > > > > Signed-off-by: David Heidelberg <david@ixit.cz> > > > --- > > > .../devicetree/bindings/display/fsl,lcdif.yaml | 11 +++++++++-- > > > 1 file changed, 9 insertions(+), 2 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > > > index fc11ab5fc465..2d868276b0f9 100644 > > > --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > > > +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > > > @@ -129,8 +129,15 @@ allOf: > > > - fsl,imx8mp-lcdif > > > - fsl,imx93-lcdif > > > then: > > > - required: > > > - - power-domains > > > + if: > > > + properties: > > > + compatible: > > > + not: > > > + contains: > > > + const: fsl,imx8mq-lcdif > > > + then: > > > + required: > > > + - power-domains > > > > We currently enable the mipi power domain for the mipi dphy and nwl > > bridge only but not for LCDIF itself assuming it's not needed (as there's > > other outputs LCDIF can drive). I *think* this is correct but maybe > > Marek or Liu can confirm? > > I'm happy to Ack this, but I've been sitting on it waiting to see if > Marek or Liu popped up.. Well, I got two positive responses, so Acked-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor.
Hi, On Sun, Jul 30, 2023 at 09:41:20PM +0300, David Heidelberg wrote: > i.MX8MQ uses as secondary compatible fsl,imx6sx-lcdif, which triggers > requirement of power-domains, thou it's not required. > > Fixes: f62678a77d58 ("dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property") > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > .../devicetree/bindings/display/fsl,lcdif.yaml | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > index fc11ab5fc465..2d868276b0f9 100644 > --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml > @@ -129,8 +129,15 @@ allOf: > - fsl,imx8mp-lcdif > - fsl,imx93-lcdif > then: > - required: > - - power-domains > + if: > + properties: > + compatible: > + not: > + contains: > + const: fsl,imx8mq-lcdif > + then: > + required: > + - power-domains > > examples: > - | > -- > 2.40.1 > Thanks a lot to Marek and Liu for confirming! Acked-by: Guido Günther <agx@sigxcpu.org> Cheers, -- Guido
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index fc11ab5fc465..2d868276b0f9 100644 --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -129,8 +129,15 @@ allOf: - fsl,imx8mp-lcdif - fsl,imx93-lcdif then: - required: - - power-domains + if: + properties: + compatible: + not: + contains: + const: fsl,imx8mq-lcdif + then: + required: + - power-domains examples: - |
i.MX8MQ uses as secondary compatible fsl,imx6sx-lcdif, which triggers requirement of power-domains, thou it's not required. Fixes: f62678a77d58 ("dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property") Signed-off-by: David Heidelberg <david@ixit.cz> --- .../devicetree/bindings/display/fsl,lcdif.yaml | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)