@@ -500,3 +500,14 @@ Description:
console drivers from the device. Raw users of pci-sysfs
resourceN attributes must be terminated prior to resizing.
Success of the resizing operation is not guaranteed.
+
+What: /sys/bus/pci/devices/.../doe_protocols
+Date: August 2023
+Contact: Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+ This directory contains a list of the supported
+ Data Object Exchange (DOE) features. The feature values are in the
+ file name. The contents of each file is the same as the name.
+ The value comes from the device and specifies the vendor and
+ data object type supported. The lower byte is the data object
+ type and the next two bytes are the vendor ID.
@@ -56,6 +56,8 @@ struct pci_doe_mb {
wait_queue_head_t wq;
struct workqueue_struct *work_queue;
unsigned long flags;
+
+ struct device_attribute *sysfs_attrs;
};
struct pci_doe_protocol {
@@ -92,6 +94,114 @@ struct pci_doe_task {
struct pci_doe_mb *doe_mb;
};
+#ifdef CONFIG_SYSFS
+static struct attribute *pci_dev_doe_proto_attrs[] = {
+ NULL,
+};
+
+static const struct attribute_group pci_dev_doe_proto_group = {
+ .name = "doe_protocols",
+ .attrs = pci_dev_doe_proto_attrs,
+};
+
+static ssize_t pci_doe_sysfs_proto_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sysfs_emit(buf, "%s\n", attr->attr.name);
+}
+
+static int pci_doe_sysfs_proto_supports(struct pci_dev *pdev,
+ struct pci_doe_mb *doe_mb)
+{
+ struct device *dev = &pdev->dev;
+ struct device_attribute *attrs;
+ unsigned long num_protos = 0;
+ unsigned long vid, type;
+ unsigned long i;
+ void *entry;
+ int ret;
+
+ xa_for_each(&doe_mb->prots, i, entry)
+ num_protos++;
+
+ attrs = kcalloc(num_protos, sizeof(*attrs), GFP_KERNEL);
+ if (!attrs)
+ return -ENOMEM;
+
+ doe_mb->sysfs_attrs = attrs;
+ xa_for_each(&doe_mb->prots, i, entry) {
+ sysfs_attr_init(&attrs[i].attr);
+ vid = xa_to_value(entry) >> 8;
+ type = xa_to_value(entry) & 0xFF;
+ attrs[i].attr.name = kasprintf(GFP_KERNEL,
+ "0x%04lX:%02lX", vid, type);
+ if (!attrs[i].attr.name) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ attrs[i].attr.mode = 0444;
+ attrs[i].show = pci_doe_sysfs_proto_show;
+
+ ret = sysfs_add_file_to_group(&dev->kobj, &attrs[i].attr,
+ pci_dev_doe_proto_group.name);
+ if (ret)
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ doe_mb->sysfs_attrs = NULL;
+ xa_for_each(&doe_mb->prots, i, entry) {
+ if (attrs[i].show)
+ sysfs_remove_file_from_group(&dev->kobj, &attrs[i].attr,
+ pci_dev_doe_proto_group.name);
+ kfree(attrs[i].attr.name);
+ }
+
+ kfree(attrs);
+
+ return ret;
+}
+
+int doe_sysfs_init(struct pci_dev *pdev)
+{
+ bool add_doe_group = false;
+ struct pci_doe_mb *doe_mb;
+ unsigned long index, j;
+ void *entry;
+ int ret;
+
+ xa_for_each(&pdev->doe_mbs, index, doe_mb) {
+ xa_for_each(&doe_mb->prots, j, entry) {
+ add_doe_group = true;
+ goto add_doe_group;
+ }
+ }
+
+ if (!add_doe_group)
+ return 0;
+
+add_doe_group:
+ ret = devm_device_add_group(&pdev->dev, &pci_dev_doe_proto_group);
+ if (ret) {
+ pci_err(pdev, "can't create DOE goup: %d\n", ret);
+ return ret;
+ }
+
+ xa_for_each(&pdev->doe_mbs, index, doe_mb) {
+ ret = pci_doe_sysfs_proto_supports(pdev, doe_mb);
+
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
static int pci_doe_wait(struct pci_doe_mb *doe_mb, unsigned long timeout)
{
if (wait_event_timeout(doe_mb->wq,
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/pci.h>
+#include <linux/pci-doe.h>
#include <linux/stat.h>
#include <linux/export.h>
#include <linux/topology.h>
@@ -1226,6 +1227,12 @@ static int pci_create_resource_files(struct pci_dev *pdev)
int i;
int retval;
+ if (IS_ENABLED(CONFIG_PCI_DOE)) {
+ retval = doe_sysfs_init(pdev);
+ if (retval)
+ return retval;
+ }
+
/* Expose the PCI resources from this device as files */
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
@@ -22,4 +22,5 @@ int pci_doe(struct pci_doe_mb *doe_mb, u16 vendor, u8 type,
const void *request, size_t request_sz,
void *response, size_t response_sz);
+int doe_sysfs_init(struct pci_dev *pci_dev);
#endif
The PCIe 6 specification added support for the Data Object Exchange (DOE). When DOE is supported the Discovery Data Object Protocol must be implemented. The protocol allows a requester to obtain information about the other DOE protocols supported by the device. The kernel is already querying the DOE protocols supported and cacheing the values. This patch exposes the values via sysfs. This will allow userspace to determine which DOE protocols are supported by the PCIe device. By exposing the information to userspace tools like lspci can relay the information to users. By listing all of the supported protocols we can allow userspace to parse and support the list, which might include vendor specific protocols as well as yet to be supported protocols. Each DOE protocol is exposed as a single file. The files are empty and the information is contained in the file name. This uses pci_sysfs_init() instead of the ->is_visible() function as is_visible only applies to the attributes under the group. Which means that every PCIe device will see a `doe_protos` directory, no matter if DOE is supported at all on the device. On top of that ->is_visible() is only called (fs/sysfs/group.c:create_files()) if there are sub attrs, which we don't necessary have. There are no static attrs, instead they are all generated dynamically. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> --- v5: - Return the file name as the file contents - Code cleanups and simplifications v4: - Fixup typos in the documentation - Make it clear that the file names contain the information - Small code cleanups - Remove most #ifdefs - Remove extra NULL assignment v3: - Expose each DOE feature as a separate file v2: - Add documentation - Code cleanups Documentation/ABI/testing/sysfs-bus-pci | 11 +++ drivers/pci/doe.c | 110 ++++++++++++++++++++++++ drivers/pci/pci-sysfs.c | 7 ++ include/linux/pci-doe.h | 1 + 4 files changed, 129 insertions(+)