| Message ID | 20230718234512.1690985-9-seanjc@google.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | KVM: guest_memfd() and per-page attributes | expand |
On Tue, Jul 18, 2023 at 04:44:51PM -0700, Sean Christopherson wrote: > From: Chao Peng <chao.p.peng@linux.intel.com> > > In confidential computing usages, whether a page is private or shared is > necessary information for KVM to perform operations like page fault > handling, page zapping etc. There are other potential use cases for > per-page memory attributes, e.g. to make memory read-only (or no-exec, > or exec-only, etc.) without having to modify memslots. > > Introduce two ioctls (advertised by KVM_CAP_MEMORY_ATTRIBUTES) to allow > userspace to operate on the per-page memory attributes. > - KVM_SET_MEMORY_ATTRIBUTES to set the per-page memory attributes to > a guest memory range. > - KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES to return the KVM supported > memory attributes. > > Use an xarray to store the per-page attributes internally, with a naive, > not fully optimized implementation, i.e. prioritize correctness over > performance for the initial implementation. > > Because setting memory attributes is roughly analogous to mprotect() on > memory that is mapped into the guest, zap existing mappings prior to > updating the memory attributes. Opportunistically provide an arch hook > for the post-set path (needed to complete invalidation anyways) in > anticipation of x86 needing the hook to update metadata related to > determining whether or not a given gfn can be backed with various sizes > of hugepages. > > It's possible that future usages may not require an invalidation, e.g. > if KVM ends up supporting RWX protections and userspace grants _more_ > protections, but again opt for simplicity and punt optimizations to > if/when they are needed. > > Suggested-by: Sean Christopherson <seanjc@google.com> > Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com > Cc: Fuad Tabba <tabba@google.com> > Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> > Co-developed-by: Sean Christopherson <seanjc@google.com> > Signed-off-by: Sean Christopherson <seanjc@google.com> > --- > Documentation/virt/kvm/api.rst | 60 ++++++++++++ > include/linux/kvm_host.h | 14 +++ > include/uapi/linux/kvm.h | 14 +++ > virt/kvm/Kconfig | 4 + > virt/kvm/kvm_main.c | 170 +++++++++++++++++++++++++++++++++ > 5 files changed, 262 insertions(+) > > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst > index 34d4ce66e0c8..0ca8561775ac 100644 > --- a/Documentation/virt/kvm/api.rst > +++ b/Documentation/virt/kvm/api.rst > @@ -6068,6 +6068,56 @@ writes to the CNTVCT_EL0 and CNTPCT_EL0 registers using the SET_ONE_REG > interface. No error will be returned, but the resulting offset will not be > applied. > > +4.139 KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES > +----------------------------------------- > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm ioctl > +:Parameters: u64 memory attributes bitmask(out) > +:Returns: 0 on success, <0 on error > + > +Returns supported memory attributes bitmask. Supported memory attributes will > +have the corresponding bits set in u64 memory attributes bitmask. > + > +The following memory attributes are defined:: > + > + #define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) > + > +4.140 KVM_SET_MEMORY_ATTRIBUTES > +----------------------------------------- > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm ioctl > +:Parameters: struct kvm_memory_attributes(in/out) > +:Returns: 0 on success, <0 on error > + > +Sets memory attributes for pages in a guest memory range. Parameters are > +specified via the following structure:: > + > + struct kvm_memory_attributes { > + __u64 address; > + __u64 size; > + __u64 attributes; > + __u64 flags; > + }; > + > +The user sets the per-page memory attributes to a guest memory range indicated > +by address/size, and in return KVM adjusts address and size to reflect the > +actual pages of the memory range have been successfully set to the attributes. > +If the call returns 0, "address" is updated to the last successful address + 1 > +and "size" is updated to the remaining address size that has not been set > +successfully. The user should check the return value as well as the size to > +decide if the operation succeeded for the whole range or not. The user may want > +to retry the operation with the returned address/size if the previous range was > +partially successful. > + > +Both address and size should be page aligned and the supported attributes can be > +retrieved with KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES. > + > +The "flags" field may be used for future extensions and should be set to 0s. > + > 5. The kvm_run structure > ======================== > > @@ -8494,6 +8544,16 @@ block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a > 64-bit bitmap (each bit describing a block size). The default value is > 0, to disable the eager page splitting. > > +8.41 KVM_CAP_MEMORY_ATTRIBUTES > +------------------------------ > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm > + > +This capability indicates KVM supports per-page memory attributes and ioctls > +KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES/KVM_SET_MEMORY_ATTRIBUTES are available. > + > 9. Known KVM API problems > ========================= > > diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h > index e9ca49d451f3..97db63da6227 100644 > --- a/include/linux/kvm_host.h > +++ b/include/linux/kvm_host.h > @@ -264,6 +264,7 @@ struct kvm_gfn_range { > gfn_t end; > union { > pte_t pte; > + unsigned long attributes; > u64 raw; > } arg; > bool may_block; > @@ -809,6 +810,9 @@ struct kvm { > > #ifdef CONFIG_HAVE_KVM_PM_NOTIFIER > struct notifier_block pm_notifier; > +#endif > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + struct xarray mem_attr_array; > #endif > char stats_id[KVM_STATS_NAME_SIZE]; > }; > @@ -2301,4 +2305,14 @@ static inline void kvm_account_pgtable_pages(void *virt, int nr) > /* Max number of entries allowed for each kvm dirty ring */ > #define KVM_DIRTY_RING_MAX_ENTRIES 65536 > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > +static inline unsigned long kvm_get_memory_attributes(struct kvm *kvm, gfn_t gfn) > +{ > + return xa_to_value(xa_load(&kvm->mem_attr_array, gfn)); > +} > + > +bool kvm_arch_post_set_memory_attributes(struct kvm *kvm, > + struct kvm_gfn_range *range); Used but no definition in this patch, it's defined in next patch 09. How about add weak version in this patch and let ARCHs to overide it ? > +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ > + > #endif > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h > index 6c6ed214b6ac..f065c57db327 100644 > --- a/include/uapi/linux/kvm.h > +++ b/include/uapi/linux/kvm.h > @@ -1211,6 +1211,7 @@ struct kvm_ppc_resize_hpt { > #define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228 > #define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229 > #define KVM_CAP_USER_MEMORY2 230 > +#define KVM_CAP_MEMORY_ATTRIBUTES 231 > > #ifdef KVM_CAP_IRQ_ROUTING > > @@ -2270,4 +2271,17 @@ struct kvm_s390_zpci_op { > /* flags for kvm_s390_zpci_op->u.reg_aen.flags */ > #define KVM_S390_ZPCIOP_REGAEN_HOST (1 << 0) > > +/* Available with KVM_CAP_MEMORY_ATTRIBUTES */ > +#define KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES _IOR(KVMIO, 0xd2, __u64) > +#define KVM_SET_MEMORY_ATTRIBUTES _IOW(KVMIO, 0xd3, struct kvm_memory_attributes) > + > +struct kvm_memory_attributes { > + __u64 address; > + __u64 size; > + __u64 attributes; > + __u64 flags; > +}; > + > +#define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) > + > #endif /* __LINUX_KVM_H */ > diff --git a/virt/kvm/Kconfig b/virt/kvm/Kconfig > index 2fa11bd26cfc..8375bc49f97d 100644 > --- a/virt/kvm/Kconfig > +++ b/virt/kvm/Kconfig > @@ -99,3 +99,7 @@ config KVM_GENERIC_HARDWARE_ENABLING > config KVM_GENERIC_MMU_NOTIFIER > select MMU_NOTIFIER > bool > + > +config KVM_GENERIC_MEMORY_ATTRIBUTES > + select KVM_GENERIC_MMU_NOTIFIER > + bool > diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c > index c14adf93daec..1a31bfa025b0 100644 > --- a/virt/kvm/kvm_main.c > +++ b/virt/kvm/kvm_main.c > @@ -530,6 +530,7 @@ struct kvm_mmu_notifier_range { > u64 end; > union { > pte_t pte; > + unsigned long attributes; > u64 raw; > } arg; > gfn_handler_t handler; > @@ -1175,6 +1176,9 @@ static struct kvm *kvm_create_vm(unsigned long type, const char *fdname) > spin_lock_init(&kvm->mn_invalidate_lock); > rcuwait_init(&kvm->mn_memslots_update_rcuwait); > xa_init(&kvm->vcpu_array); > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + xa_init(&kvm->mem_attr_array); > +#endif > > INIT_LIST_HEAD(&kvm->gpc_list); > spin_lock_init(&kvm->gpc_lock); > @@ -1346,6 +1350,9 @@ static void kvm_destroy_vm(struct kvm *kvm) > kvm_free_memslots(kvm, &kvm->__memslots[i][0]); > kvm_free_memslots(kvm, &kvm->__memslots[i][1]); > } > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + xa_destroy(&kvm->mem_attr_array); > +#endif > cleanup_srcu_struct(&kvm->irq_srcu); > cleanup_srcu_struct(&kvm->srcu); > kvm_arch_free_vm(kvm); > @@ -2346,6 +2353,145 @@ static int kvm_vm_ioctl_clear_dirty_log(struct kvm *kvm, > } > #endif /* CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT */ > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > +static u64 kvm_supported_mem_attributes(struct kvm *kvm) > +{ > + return 0; > +} > + > +static __always_inline void kvm_handle_gfn_range(struct kvm *kvm, > + struct kvm_mmu_notifier_range *range) > +{ > + struct kvm_gfn_range gfn_range; > + struct kvm_memory_slot *slot; > + struct kvm_memslots *slots; > + struct kvm_memslot_iter iter; > + bool locked = false; > + bool ret = false; > + int i; > + > + gfn_range.arg.raw = range->arg.raw; > + gfn_range.may_block = range->may_block; > + > + for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) { > + slots = __kvm_memslots(kvm, i); > + > + kvm_for_each_memslot_in_gfn_range(&iter, slots, range->start, range->end) { > + slot = iter.slot; > + gfn_range.slot = slot; > + > + gfn_range.start = max(range->start, slot->base_gfn); > + gfn_range.end = min(range->end, slot->base_gfn + slot->npages); > + if (gfn_range.start >= gfn_range.end) > + continue; > + > + if (!locked) { > + locked = true; > + KVM_MMU_LOCK(kvm); > + if (!IS_KVM_NULL_FN(range->on_lock)) > + range->on_lock(kvm); > + } > + > + ret |= range->handler(kvm, &gfn_range); > + } > + } > + > + if (range->flush_on_ret && ret) > + kvm_flush_remote_tlbs(kvm); > + > + if (locked) { > + KVM_MMU_UNLOCK(kvm); > + if (!IS_KVM_NULL_FN(range->on_unlock)) > + range->on_unlock(kvm); > + } > +} > + > +static int kvm_vm_set_mem_attributes(struct kvm *kvm, unsigned long attributes, > + gfn_t start, gfn_t end) > +{ > + struct kvm_mmu_notifier_range unmap_range = { > + .start = start, > + .end = end, > + .handler = kvm_mmu_unmap_gfn_range, > + .on_lock = kvm_mmu_invalidate_begin, > + .on_unlock = (void *)kvm_null_fn, > + .flush_on_ret = true, > + .may_block = true, > + }; > + struct kvm_mmu_notifier_range post_set_range = { > + .start = start, > + .end = end, > + .arg.attributes = attributes, > + .handler = kvm_arch_post_set_memory_attributes, > + .on_lock = (void *)kvm_null_fn, > + .on_unlock = kvm_mmu_invalidate_end, > + .may_block = true, > + }; > + unsigned long i; > + void *entry; > + int r; > + > + entry = attributes ? xa_mk_value(attributes) : NULL; > + > + mutex_lock(&kvm->slots_lock); > + > + /* > + * Reserve memory ahead of time to avoid having to deal with failures > + * partway through setting the new attributes. > + */ > + for (i = start; i < end; i++) { > + r = xa_reserve(&kvm->mem_attr_array, i, GFP_KERNEL_ACCOUNT); > + if (r) > + goto out_unlock; > + } > + > + kvm_handle_gfn_range(kvm, &unmap_range); > + > + for (i = start; i < end; i++) { > + r = xa_err(xa_store(&kvm->mem_attr_array, i, entry, > + GFP_KERNEL_ACCOUNT)); > + KVM_BUG_ON(r, kvm); > + } > + > + kvm_handle_gfn_range(kvm, &post_set_range); > + > +out_unlock: > + mutex_unlock(&kvm->slots_lock); > + > + return r; > +} > +static int kvm_vm_ioctl_set_mem_attributes(struct kvm *kvm, > + struct kvm_memory_attributes *attrs) > +{ > + gfn_t start, end; > + > + /* flags is currently not used. */ > + if (attrs->flags) > + return -EINVAL; > + if (attrs->attributes & ~kvm_supported_mem_attributes(kvm)) > + return -EINVAL; > + if (attrs->size == 0 || attrs->address + attrs->size < attrs->address) > + return -EINVAL; > + if (!PAGE_ALIGNED(attrs->address) || !PAGE_ALIGNED(attrs->size)) > + return -EINVAL; > + > + start = attrs->address >> PAGE_SHIFT; > + end = (attrs->address + attrs->size - 1 + PAGE_SIZE) >> PAGE_SHIFT; > + > + if (WARN_ON_ONCE(start == end)) > + return -EINVAL; > + > + /* > + * xarray tracks data using "unsigned long", and as a result so does > + * KVM. For simplicity, supports generic attributes only on 64-bit > + * architectures. > + */ > + BUILD_BUG_ON(sizeof(attrs->attributes) != sizeof(unsigned long)); > + > + return kvm_vm_set_mem_attributes(kvm, attrs->attributes, start, end); > +} > +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ > + > struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn) > { > return __gfn_to_memslot(kvm_memslots(kvm), gfn); > @@ -4521,6 +4667,9 @@ static int kvm_vm_ioctl_check_extension_generic(struct kvm *kvm, long arg) > #ifdef CONFIG_HAVE_KVM_MSI > case KVM_CAP_SIGNAL_MSI: > #endif > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + case KVM_CAP_MEMORY_ATTRIBUTES: > +#endif > #ifdef CONFIG_HAVE_KVM_IRQFD > case KVM_CAP_IRQFD: > #endif > @@ -4937,6 +5086,27 @@ static long kvm_vm_ioctl(struct file *filp, > break; > } > #endif /* CONFIG_HAVE_KVM_IRQ_ROUTING */ > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + case KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES: { > + u64 attrs = kvm_supported_mem_attributes(kvm); > + > + r = -EFAULT; > + if (copy_to_user(argp, &attrs, sizeof(attrs))) > + goto out; > + r = 0; > + break; > + } > + case KVM_SET_MEMORY_ATTRIBUTES: { > + struct kvm_memory_attributes attrs; > + > + r = -EFAULT; > + if (copy_from_user(&attrs, argp, sizeof(attrs))) > + goto out; > + > + r = kvm_vm_ioctl_set_mem_attributes(kvm, &attrs); > + break; > + } > +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ > case KVM_CREATE_DEVICE: { > struct kvm_create_device cd; > > -- > 2.41.0.255.g8b1d071c50-goog >
On Thu, Jul 20, 2023 at 04:09:12PM +0800, Yuan Yao <yuan.yao@linux.intel.com> wrote: > On Tue, Jul 18, 2023 at 04:44:51PM -0700, Sean Christopherson wrote: > > From: Chao Peng <chao.p.peng@linux.intel.com> > > > > In confidential computing usages, whether a page is private or shared is > > necessary information for KVM to perform operations like page fault > > handling, page zapping etc. There are other potential use cases for > > per-page memory attributes, e.g. to make memory read-only (or no-exec, > > or exec-only, etc.) without having to modify memslots. > > > > Introduce two ioctls (advertised by KVM_CAP_MEMORY_ATTRIBUTES) to allow > > userspace to operate on the per-page memory attributes. > > - KVM_SET_MEMORY_ATTRIBUTES to set the per-page memory attributes to > > a guest memory range. > > - KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES to return the KVM supported > > memory attributes. > > > > Use an xarray to store the per-page attributes internally, with a naive, > > not fully optimized implementation, i.e. prioritize correctness over > > performance for the initial implementation. > > > > Because setting memory attributes is roughly analogous to mprotect() on > > memory that is mapped into the guest, zap existing mappings prior to > > updating the memory attributes. Opportunistically provide an arch hook > > for the post-set path (needed to complete invalidation anyways) in > > anticipation of x86 needing the hook to update metadata related to > > determining whether or not a given gfn can be backed with various sizes > > of hugepages. > > > > It's possible that future usages may not require an invalidation, e.g. > > if KVM ends up supporting RWX protections and userspace grants _more_ > > protections, but again opt for simplicity and punt optimizations to > > if/when they are needed. > > > > Suggested-by: Sean Christopherson <seanjc@google.com> > > Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com > > Cc: Fuad Tabba <tabba@google.com> > > Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> > > Co-developed-by: Sean Christopherson <seanjc@google.com> > > Signed-off-by: Sean Christopherson <seanjc@google.com> > > --- > > Documentation/virt/kvm/api.rst | 60 ++++++++++++ > > include/linux/kvm_host.h | 14 +++ > > include/uapi/linux/kvm.h | 14 +++ > > virt/kvm/Kconfig | 4 + > > virt/kvm/kvm_main.c | 170 +++++++++++++++++++++++++++++++++ > > 5 files changed, 262 insertions(+) > > > > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst > > index 34d4ce66e0c8..0ca8561775ac 100644 > > --- a/Documentation/virt/kvm/api.rst > > +++ b/Documentation/virt/kvm/api.rst > > @@ -6068,6 +6068,56 @@ writes to the CNTVCT_EL0 and CNTPCT_EL0 registers using the SET_ONE_REG > > interface. No error will be returned, but the resulting offset will not be > > applied. > > > > +4.139 KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES > > +----------------------------------------- > > + > > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > > +:Architectures: x86 > > +:Type: vm ioctl > > +:Parameters: u64 memory attributes bitmask(out) > > +:Returns: 0 on success, <0 on error > > + > > +Returns supported memory attributes bitmask. Supported memory attributes will > > +have the corresponding bits set in u64 memory attributes bitmask. > > + > > +The following memory attributes are defined:: > > + > > + #define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) > > + > > +4.140 KVM_SET_MEMORY_ATTRIBUTES > > +----------------------------------------- > > + > > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > > +:Architectures: x86 > > +:Type: vm ioctl > > +:Parameters: struct kvm_memory_attributes(in/out) > > +:Returns: 0 on success, <0 on error > > + > > +Sets memory attributes for pages in a guest memory range. Parameters are > > +specified via the following structure:: > > + > > + struct kvm_memory_attributes { > > + __u64 address; > > + __u64 size; > > + __u64 attributes; > > + __u64 flags; > > + }; > > + > > +The user sets the per-page memory attributes to a guest memory range indicated > > +by address/size, and in return KVM adjusts address and size to reflect the > > +actual pages of the memory range have been successfully set to the attributes. > > +If the call returns 0, "address" is updated to the last successful address + 1 > > +and "size" is updated to the remaining address size that has not been set > > +successfully. The user should check the return value as well as the size to > > +decide if the operation succeeded for the whole range or not. The user may want > > +to retry the operation with the returned address/size if the previous range was > > +partially successful. > > + > > +Both address and size should be page aligned and the supported attributes can be > > +retrieved with KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES. > > + > > +The "flags" field may be used for future extensions and should be set to 0s. > > + > > 5. The kvm_run structure > > ======================== > > > > @@ -8494,6 +8544,16 @@ block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a > > 64-bit bitmap (each bit describing a block size). The default value is > > 0, to disable the eager page splitting. > > > > +8.41 KVM_CAP_MEMORY_ATTRIBUTES > > +------------------------------ > > + > > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > > +:Architectures: x86 > > +:Type: vm > > + > > +This capability indicates KVM supports per-page memory attributes and ioctls > > +KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES/KVM_SET_MEMORY_ATTRIBUTES are available. > > + > > 9. Known KVM API problems > > ========================= > > > > diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h > > index e9ca49d451f3..97db63da6227 100644 > > --- a/include/linux/kvm_host.h > > +++ b/include/linux/kvm_host.h > > @@ -264,6 +264,7 @@ struct kvm_gfn_range { > > gfn_t end; > > union { > > pte_t pte; > > + unsigned long attributes; > > u64 raw; > > } arg; > > bool may_block; > > @@ -809,6 +810,9 @@ struct kvm { > > > > #ifdef CONFIG_HAVE_KVM_PM_NOTIFIER > > struct notifier_block pm_notifier; > > +#endif > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > > + struct xarray mem_attr_array; > > #endif > > char stats_id[KVM_STATS_NAME_SIZE]; > > }; > > @@ -2301,4 +2305,14 @@ static inline void kvm_account_pgtable_pages(void *virt, int nr) > > /* Max number of entries allowed for each kvm dirty ring */ > > #define KVM_DIRTY_RING_MAX_ENTRIES 65536 > > > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > > +static inline unsigned long kvm_get_memory_attributes(struct kvm *kvm, gfn_t gfn) > > +{ > > + return xa_to_value(xa_load(&kvm->mem_attr_array, gfn)); > > +} > > + > > +bool kvm_arch_post_set_memory_attributes(struct kvm *kvm, > > + struct kvm_gfn_range *range); > > Used but no definition in this patch, it's defined in next patch 09. > How about add weak version in this patch and let ARCHs to overide it ? It is guarded by CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES.
On Thu, Jul 20, 2023, Isaku Yamahata wrote: > On Thu, Jul 20, 2023 at 04:09:12PM +0800, > Yuan Yao <yuan.yao@linux.intel.com> wrote: > > > On Tue, Jul 18, 2023 at 04:44:51PM -0700, Sean Christopherson wrote: > > > @@ -2301,4 +2305,14 @@ static inline void kvm_account_pgtable_pages(void *virt, int nr) > > > /* Max number of entries allowed for each kvm dirty ring */ > > > #define KVM_DIRTY_RING_MAX_ENTRIES 65536 > > > > > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > > > +static inline unsigned long kvm_get_memory_attributes(struct kvm *kvm, gfn_t gfn) > > > +{ > > > + return xa_to_value(xa_load(&kvm->mem_attr_array, gfn)); > > > +} > > > + > > > +bool kvm_arch_post_set_memory_attributes(struct kvm *kvm, > > > + struct kvm_gfn_range *range); > > > > Used but no definition in this patch, it's defined in next patch 09. > > How about add weak version in this patch and let ARCHs to overide it ? > > It is guarded by CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES. Yep. I don't love the ordering, e.g. this patch can't even be compile tested until later in the series, but I wanted to separate x86 usage from the generic support code.
On 7/19/23 01:44, Sean Christopherson wrote: > From: Chao Peng <chao.p.peng@linux.intel.com> > > In confidential computing usages, whether a page is private or shared is > necessary information for KVM to perform operations like page fault > handling, page zapping etc. There are other potential use cases for > per-page memory attributes, e.g. to make memory read-only (or no-exec, > or exec-only, etc.) without having to modify memslots. > > Introduce two ioctls (advertised by KVM_CAP_MEMORY_ATTRIBUTES) to allow > userspace to operate on the per-page memory attributes. > - KVM_SET_MEMORY_ATTRIBUTES to set the per-page memory attributes to > a guest memory range. > - KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES to return the KVM supported > memory attributes. > > Use an xarray to store the per-page attributes internally, with a naive, > not fully optimized implementation, i.e. prioritize correctness over > performance for the initial implementation. > > Because setting memory attributes is roughly analogous to mprotect() on > memory that is mapped into the guest, zap existing mappings prior to > updating the memory attributes. Opportunistically provide an arch hook > for the post-set path (needed to complete invalidation anyways) in > anticipation of x86 needing the hook to update metadata related to > determining whether or not a given gfn can be backed with various sizes > of hugepages. > > It's possible that future usages may not require an invalidation, e.g. > if KVM ends up supporting RWX protections and userspace grants _more_ > protections, but again opt for simplicity and punt optimizations to > if/when they are needed. > > Suggested-by: Sean Christopherson <seanjc@google.com> > Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com > Cc: Fuad Tabba <tabba@google.com> > Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> > Co-developed-by: Sean Christopherson <seanjc@google.com> > Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
On 7/19/2023 7:44 AM, Sean Christopherson wrote: > +4.140 KVM_SET_MEMORY_ATTRIBUTES > +----------------------------------------- > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm ioctl > +:Parameters: struct kvm_memory_attributes(in/out) > +:Returns: 0 on success, <0 on error > + > +Sets memory attributes for pages in a guest memory range. Parameters are > +specified via the following structure:: > + > + struct kvm_memory_attributes { > + __u64 address; > + __u64 size; > + __u64 attributes; > + __u64 flags; > + }; > + > +The user sets the per-page memory attributes to a guest memory range indicated > +by address/size, and in return KVM adjusts address and size to reflect the > +actual pages of the memory range have been successfully set to the attributes. > +If the call returns 0, "address" is updated to the last successful address + 1 > +and "size" is updated to the remaining address size that has not been set > +successfully. The user should check the return value as well as the size to > +decide if the operation succeeded for the whole range or not. The user may want > +to retry the operation with the returned address/size if the previous range was > +partially successful. This does not match with the implementation. Please fix either one to make them consistent.
On 2023-07-18 at 16:44:51 -0700, Sean Christopherson wrote: > From: Chao Peng <chao.p.peng@linux.intel.com> > > In confidential computing usages, whether a page is private or shared is > necessary information for KVM to perform operations like page fault > handling, page zapping etc. There are other potential use cases for > per-page memory attributes, e.g. to make memory read-only (or no-exec, > or exec-only, etc.) without having to modify memslots. > > Introduce two ioctls (advertised by KVM_CAP_MEMORY_ATTRIBUTES) to allow > userspace to operate on the per-page memory attributes. > - KVM_SET_MEMORY_ATTRIBUTES to set the per-page memory attributes to > a guest memory range. > - KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES to return the KVM supported > memory attributes. > > Use an xarray to store the per-page attributes internally, with a naive, > not fully optimized implementation, i.e. prioritize correctness over > performance for the initial implementation. > > Because setting memory attributes is roughly analogous to mprotect() on > memory that is mapped into the guest, zap existing mappings prior to > updating the memory attributes. Opportunistically provide an arch hook > for the post-set path (needed to complete invalidation anyways) in > anticipation of x86 needing the hook to update metadata related to > determining whether or not a given gfn can be backed with various sizes > of hugepages. > > It's possible that future usages may not require an invalidation, e.g. > if KVM ends up supporting RWX protections and userspace grants _more_ > protections, but again opt for simplicity and punt optimizations to > if/when they are needed. > > Suggested-by: Sean Christopherson <seanjc@google.com> > Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com > Cc: Fuad Tabba <tabba@google.com> > Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> > Co-developed-by: Sean Christopherson <seanjc@google.com> > Signed-off-by: Sean Christopherson <seanjc@google.com> > --- > Documentation/virt/kvm/api.rst | 60 ++++++++++++ > include/linux/kvm_host.h | 14 +++ > include/uapi/linux/kvm.h | 14 +++ > virt/kvm/Kconfig | 4 + > virt/kvm/kvm_main.c | 170 +++++++++++++++++++++++++++++++++ > 5 files changed, 262 insertions(+) > Only some trivial concerns below. [...] > @@ -1175,6 +1176,9 @@ static struct kvm *kvm_create_vm(unsigned long type, const char *fdname) > spin_lock_init(&kvm->mn_invalidate_lock); > rcuwait_init(&kvm->mn_memslots_update_rcuwait); > xa_init(&kvm->vcpu_array); > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + xa_init(&kvm->mem_attr_array); > +#endif > > INIT_LIST_HEAD(&kvm->gpc_list); > spin_lock_init(&kvm->gpc_lock); > @@ -1346,6 +1350,9 @@ static void kvm_destroy_vm(struct kvm *kvm) > kvm_free_memslots(kvm, &kvm->__memslots[i][0]); > kvm_free_memslots(kvm, &kvm->__memslots[i][1]); > } > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + xa_destroy(&kvm->mem_attr_array); > +#endif Is it better to make the destruction in reverse order from the creation? To put xa_destroy(&kvm->mem_attr_array) after cleanup_srcu_struct(&kvm->srcu), or put xa_init(&kvm->mem_attr_array) after init_srcu_struct(&kvm->irq_srcu). > cleanup_srcu_struct(&kvm->irq_srcu); > cleanup_srcu_struct(&kvm->srcu); > kvm_arch_free_vm(kvm); > @@ -2346,6 +2353,145 @@ static int kvm_vm_ioctl_clear_dirty_log(struct kvm *kvm, > } > #endif /* CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT */ [...] > +static int kvm_vm_ioctl_set_mem_attributes(struct kvm *kvm, > + struct kvm_memory_attributes *attrs) > +{ > + gfn_t start, end; > + > + /* flags is currently not used. */ > + if (attrs->flags) > + return -EINVAL; > + if (attrs->attributes & ~kvm_supported_mem_attributes(kvm)) > + return -EINVAL; > + if (attrs->size == 0 || attrs->address + attrs->size < attrs->address) > + return -EINVAL; > + if (!PAGE_ALIGNED(attrs->address) || !PAGE_ALIGNED(attrs->size)) > + return -EINVAL; > + > + start = attrs->address >> PAGE_SHIFT; > + end = (attrs->address + attrs->size - 1 + PAGE_SIZE) >> PAGE_SHIFT; As the attrs->address/size are both garanteed to be non-zero, non-wrap and page aligned in prevous check. Is it OK to simplify the calculation, like: end = (attrs->address + attrs->size) >> PAGE_SHIFT; > + > + if (WARN_ON_ONCE(start == end)) > + return -EINVAL; Also, is this check possible to be hit? Maybe remove it? Thanks, Yilun > + > + /* > + * xarray tracks data using "unsigned long", and as a result so does > + * KVM. For simplicity, supports generic attributes only on 64-bit > + * architectures. > + */ > + BUILD_BUG_ON(sizeof(attrs->attributes) != sizeof(unsigned long)); > + > + return kvm_vm_set_mem_attributes(kvm, attrs->attributes, start, end); > +} > +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */
On Mon, Jul 24, 2023, Xu Yilun wrote: > On 2023-07-18 at 16:44:51 -0700, Sean Christopherson wrote: > > @@ -1346,6 +1350,9 @@ static void kvm_destroy_vm(struct kvm *kvm) > > kvm_free_memslots(kvm, &kvm->__memslots[i][0]); > > kvm_free_memslots(kvm, &kvm->__memslots[i][1]); > > } > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > > + xa_destroy(&kvm->mem_attr_array); > > +#endif > > Is it better to make the destruction in reverse order from the creation? Yeah. It _shoudn't_ matter, but there's no reason not keep things tidy and consistent. > To put xa_destroy(&kvm->mem_attr_array) after cleanup_srcu_struct(&kvm->srcu), > or put xa_init(&kvm->mem_attr_array) after init_srcu_struct(&kvm->irq_srcu). The former, because init_srcu_struct() can fail (allocates memory), whereas xa_init() is a "pure" initialization routine. > > cleanup_srcu_struct(&kvm->irq_srcu); > > cleanup_srcu_struct(&kvm->srcu); > > kvm_arch_free_vm(kvm); > > @@ -2346,6 +2353,145 @@ static int kvm_vm_ioctl_clear_dirty_log(struct kvm *kvm, > > } > > #endif /* CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT */ > > [...] > > > +static int kvm_vm_ioctl_set_mem_attributes(struct kvm *kvm, > > + struct kvm_memory_attributes *attrs) > > +{ > > + gfn_t start, end; > > + > > + /* flags is currently not used. */ > > + if (attrs->flags) > > + return -EINVAL; > > + if (attrs->attributes & ~kvm_supported_mem_attributes(kvm)) > > + return -EINVAL; > > + if (attrs->size == 0 || attrs->address + attrs->size < attrs->address) > > + return -EINVAL; > > + if (!PAGE_ALIGNED(attrs->address) || !PAGE_ALIGNED(attrs->size)) > > + return -EINVAL; > > + > > + start = attrs->address >> PAGE_SHIFT; > > + end = (attrs->address + attrs->size - 1 + PAGE_SIZE) >> PAGE_SHIFT; > > As the attrs->address/size are both garanteed to be non-zero, non-wrap > and page aligned in prevous check. Is it OK to simplify the calculation, > like: > > end = (attrs->address + attrs->size) >> PAGE_SHIFT; Yes, that should work. Chao, am I missing something? Or did we just end up with unnecessarly convoluted code as things evolved? > > + > > + if (WARN_ON_ONCE(start == end)) > > + return -EINVAL; > > Also, is this check possible to be hit? Maybe remove it? It should be impossible to, hence the WARN. I added the check for two reasons: (1) to help document that end is exclusive, and (2) to guard against future bugs.
On 2023-07-26 at 08:59:53 -0700, Sean Christopherson wrote: > On Mon, Jul 24, 2023, Xu Yilun wrote: > > On 2023-07-18 at 16:44:51 -0700, Sean Christopherson wrote: > > > + if (WARN_ON_ONCE(start == end)) > > > + return -EINVAL; > > > > Also, is this check possible to be hit? Maybe remove it? > > It should be impossible to, hence the WARN. I added the check for two reasons: > (1) to help document that end is exclusive, and (2) to guard against future bugs. Understood. I'm good to it.
On Tue, Jul 18, 2023 at 04:44:51PM -0700, Sean Christopherson <seanjc@google.com> wrote: > From: Chao Peng <chao.p.peng@linux.intel.com> > > In confidential computing usages, whether a page is private or shared is > necessary information for KVM to perform operations like page fault > handling, page zapping etc. There are other potential use cases for > per-page memory attributes, e.g. to make memory read-only (or no-exec, > or exec-only, etc.) without having to modify memslots. > > Introduce two ioctls (advertised by KVM_CAP_MEMORY_ATTRIBUTES) to allow > userspace to operate on the per-page memory attributes. > - KVM_SET_MEMORY_ATTRIBUTES to set the per-page memory attributes to > a guest memory range. > - KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES to return the KVM supported > memory attributes. > > Use an xarray to store the per-page attributes internally, with a naive, > not fully optimized implementation, i.e. prioritize correctness over > performance for the initial implementation. > > Because setting memory attributes is roughly analogous to mprotect() on > memory that is mapped into the guest, zap existing mappings prior to > updating the memory attributes. Opportunistically provide an arch hook > for the post-set path (needed to complete invalidation anyways) in > anticipation of x86 needing the hook to update metadata related to > determining whether or not a given gfn can be backed with various sizes > of hugepages. > > It's possible that future usages may not require an invalidation, e.g. > if KVM ends up supporting RWX protections and userspace grants _more_ > protections, but again opt for simplicity and punt optimizations to > if/when they are needed. > > Suggested-by: Sean Christopherson <seanjc@google.com> > Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com > Cc: Fuad Tabba <tabba@google.com> > Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> > Co-developed-by: Sean Christopherson <seanjc@google.com> > Signed-off-by: Sean Christopherson <seanjc@google.com> > --- > Documentation/virt/kvm/api.rst | 60 ++++++++++++ > include/linux/kvm_host.h | 14 +++ > include/uapi/linux/kvm.h | 14 +++ > virt/kvm/Kconfig | 4 + > virt/kvm/kvm_main.c | 170 +++++++++++++++++++++++++++++++++ > 5 files changed, 262 insertions(+) > > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst > index 34d4ce66e0c8..0ca8561775ac 100644 > --- a/Documentation/virt/kvm/api.rst > +++ b/Documentation/virt/kvm/api.rst > @@ -6068,6 +6068,56 @@ writes to the CNTVCT_EL0 and CNTPCT_EL0 registers using the SET_ONE_REG > interface. No error will be returned, but the resulting offset will not be > applied. > > +4.139 KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES > +----------------------------------------- > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm ioctl > +:Parameters: u64 memory attributes bitmask(out) > +:Returns: 0 on success, <0 on error > + > +Returns supported memory attributes bitmask. Supported memory attributes will > +have the corresponding bits set in u64 memory attributes bitmask. > + > +The following memory attributes are defined:: > + > + #define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) > + > +4.140 KVM_SET_MEMORY_ATTRIBUTES > +----------------------------------------- > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm ioctl > +:Parameters: struct kvm_memory_attributes(in/out) > +:Returns: 0 on success, <0 on error > + > +Sets memory attributes for pages in a guest memory range. Parameters are > +specified via the following structure:: > + > + struct kvm_memory_attributes { > + __u64 address; > + __u64 size; > + __u64 attributes; > + __u64 flags; > + }; > + > +The user sets the per-page memory attributes to a guest memory range indicated > +by address/size, and in return KVM adjusts address and size to reflect the > +actual pages of the memory range have been successfully set to the attributes. > +If the call returns 0, "address" is updated to the last successful address + 1 > +and "size" is updated to the remaining address size that has not been set > +successfully. The user should check the return value as well as the size to > +decide if the operation succeeded for the whole range or not. The user may want > +to retry the operation with the returned address/size if the previous range was > +partially successful. > + > +Both address and size should be page aligned and the supported attributes can be > +retrieved with KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES. > + > +The "flags" field may be used for future extensions and should be set to 0s. > + > 5. The kvm_run structure > ======================== > > @@ -8494,6 +8544,16 @@ block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a > 64-bit bitmap (each bit describing a block size). The default value is > 0, to disable the eager page splitting. > > +8.41 KVM_CAP_MEMORY_ATTRIBUTES > +------------------------------ > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm > + > +This capability indicates KVM supports per-page memory attributes and ioctls > +KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES/KVM_SET_MEMORY_ATTRIBUTES are available. > + > 9. Known KVM API problems > ========================= > > diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h > index e9ca49d451f3..97db63da6227 100644 > --- a/include/linux/kvm_host.h > +++ b/include/linux/kvm_host.h > @@ -264,6 +264,7 @@ struct kvm_gfn_range { > gfn_t end; > union { > pte_t pte; > + unsigned long attributes; > u64 raw; > } arg; > bool may_block; > @@ -809,6 +810,9 @@ struct kvm { > > #ifdef CONFIG_HAVE_KVM_PM_NOTIFIER > struct notifier_block pm_notifier; > +#endif > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + struct xarray mem_attr_array; > #endif > char stats_id[KVM_STATS_NAME_SIZE]; > }; > @@ -2301,4 +2305,14 @@ static inline void kvm_account_pgtable_pages(void *virt, int nr) > /* Max number of entries allowed for each kvm dirty ring */ > #define KVM_DIRTY_RING_MAX_ENTRIES 65536 > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > +static inline unsigned long kvm_get_memory_attributes(struct kvm *kvm, gfn_t gfn) > +{ > + return xa_to_value(xa_load(&kvm->mem_attr_array, gfn)); > +} > + > +bool kvm_arch_post_set_memory_attributes(struct kvm *kvm, > + struct kvm_gfn_range *range); > +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ > + > #endif > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h > index 6c6ed214b6ac..f065c57db327 100644 > --- a/include/uapi/linux/kvm.h > +++ b/include/uapi/linux/kvm.h > @@ -1211,6 +1211,7 @@ struct kvm_ppc_resize_hpt { > #define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228 > #define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229 > #define KVM_CAP_USER_MEMORY2 230 > +#define KVM_CAP_MEMORY_ATTRIBUTES 231 > > #ifdef KVM_CAP_IRQ_ROUTING > > @@ -2270,4 +2271,17 @@ struct kvm_s390_zpci_op { > /* flags for kvm_s390_zpci_op->u.reg_aen.flags */ > #define KVM_S390_ZPCIOP_REGAEN_HOST (1 << 0) > > +/* Available with KVM_CAP_MEMORY_ATTRIBUTES */ > +#define KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES _IOR(KVMIO, 0xd2, __u64) > +#define KVM_SET_MEMORY_ATTRIBUTES _IOW(KVMIO, 0xd3, struct kvm_memory_attributes) > + > +struct kvm_memory_attributes { > + __u64 address; > + __u64 size; > + __u64 attributes; > + __u64 flags; > +}; > + > +#define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) > + > #endif /* __LINUX_KVM_H */ > diff --git a/virt/kvm/Kconfig b/virt/kvm/Kconfig > index 2fa11bd26cfc..8375bc49f97d 100644 > --- a/virt/kvm/Kconfig > +++ b/virt/kvm/Kconfig > @@ -99,3 +99,7 @@ config KVM_GENERIC_HARDWARE_ENABLING > config KVM_GENERIC_MMU_NOTIFIER > select MMU_NOTIFIER > bool > + > +config KVM_GENERIC_MEMORY_ATTRIBUTES > + select KVM_GENERIC_MMU_NOTIFIER > + bool > diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c > index c14adf93daec..1a31bfa025b0 100644 > --- a/virt/kvm/kvm_main.c > +++ b/virt/kvm/kvm_main.c > @@ -530,6 +530,7 @@ struct kvm_mmu_notifier_range { > u64 end; > union { > pte_t pte; > + unsigned long attributes; > u64 raw; > } arg; > gfn_handler_t handler; > @@ -1175,6 +1176,9 @@ static struct kvm *kvm_create_vm(unsigned long type, const char *fdname) > spin_lock_init(&kvm->mn_invalidate_lock); > rcuwait_init(&kvm->mn_memslots_update_rcuwait); > xa_init(&kvm->vcpu_array); > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + xa_init(&kvm->mem_attr_array); > +#endif > > INIT_LIST_HEAD(&kvm->gpc_list); > spin_lock_init(&kvm->gpc_lock); > @@ -1346,6 +1350,9 @@ static void kvm_destroy_vm(struct kvm *kvm) > kvm_free_memslots(kvm, &kvm->__memslots[i][0]); > kvm_free_memslots(kvm, &kvm->__memslots[i][1]); > } > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + xa_destroy(&kvm->mem_attr_array); > +#endif > cleanup_srcu_struct(&kvm->irq_srcu); > cleanup_srcu_struct(&kvm->srcu); > kvm_arch_free_vm(kvm); > @@ -2346,6 +2353,145 @@ static int kvm_vm_ioctl_clear_dirty_log(struct kvm *kvm, > } > #endif /* CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT */ > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > +static u64 kvm_supported_mem_attributes(struct kvm *kvm) > +{ > + return 0; > +} > + > +static __always_inline void kvm_handle_gfn_range(struct kvm *kvm, > + struct kvm_mmu_notifier_range *range) > +{ > + struct kvm_gfn_range gfn_range; > + struct kvm_memory_slot *slot; > + struct kvm_memslots *slots; > + struct kvm_memslot_iter iter; > + bool locked = false; > + bool ret = false; > + int i; > + > + gfn_range.arg.raw = range->arg.raw; > + gfn_range.may_block = range->may_block; > + > + for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) { > + slots = __kvm_memslots(kvm, i); > + > + kvm_for_each_memslot_in_gfn_range(&iter, slots, range->start, range->end) { > + slot = iter.slot; > + gfn_range.slot = slot; > + > + gfn_range.start = max(range->start, slot->base_gfn); > + gfn_range.end = min(range->end, slot->base_gfn + slot->npages); > + if (gfn_range.start >= gfn_range.end) > + continue; > + > + if (!locked) { > + locked = true; > + KVM_MMU_LOCK(kvm); > + if (!IS_KVM_NULL_FN(range->on_lock)) > + range->on_lock(kvm); > + } > + > + ret |= range->handler(kvm, &gfn_range); > + } > + } > + > + if (range->flush_on_ret && ret) > + kvm_flush_remote_tlbs(kvm); > + > + if (locked) { > + KVM_MMU_UNLOCK(kvm); > + if (!IS_KVM_NULL_FN(range->on_unlock)) > + range->on_unlock(kvm); > + } > +} > + > +static int kvm_vm_set_mem_attributes(struct kvm *kvm, unsigned long attributes, > + gfn_t start, gfn_t end) > +{ > + struct kvm_mmu_notifier_range unmap_range = { > + .start = start, > + .end = end, > + .handler = kvm_mmu_unmap_gfn_range, > + .on_lock = kvm_mmu_invalidate_begin, > + .on_unlock = (void *)kvm_null_fn, > + .flush_on_ret = true, > + .may_block = true, > + }; > + struct kvm_mmu_notifier_range post_set_range = { > + .start = start, > + .end = end, > + .arg.attributes = attributes, > + .handler = kvm_arch_post_set_memory_attributes, > + .on_lock = (void *)kvm_null_fn, > + .on_unlock = kvm_mmu_invalidate_end, on_unlock is called after unlocking mmu_lock. So kvm::mmu_invalidate_in_progress is touched out side of it. Here is a quick fix. WARNING: CPU: 108 PID: 62218 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:757 kvm_mmu_unmap_gfn_range+0x32/0x70 [kvm] ... RIP: 0010:kvm_mmu_unmap_gfn_range+0x32/0x70 [kvm] ... Call Trace: <TASK> kvm_gmem_invalidate_begin+0xd0/0x130 [kvm] kvm_gmem_fallocate+0x134/0x290 [kvm] vfs_fallocate+0x151/0x380 __x64_sys_fallocate+0x3c/0x70 do_syscall_64+0x40/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 From c06084048271278d3508f534479b356f49f619ce Mon Sep 17 00:00:00 2001 Message-Id: <c06084048271278d3508f534479b356f49f619ce.1690873712.git.isaku.yamahata@intel.com> From: Isaku Yamahata <isaku.yamahata@intel.com> Date: Mon, 31 Jul 2023 22:58:15 -0700 Subject: [PATCH] KVM: guest_memfd(): protect kvm_mmu_invalidate_end() kvm_mmu_invalidate_end() updates struct kvm::mmu_invalidate_in_progress and it's protected by kvm::mmu_lock. call kvm_mmu_invalidate_end() before unlocking it. Not after the unlock. Fixes: edd048ffeaf6 ("KVM: Introduce per-page memory attributes") Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> --- virt/kvm/kvm_main.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 9b4759b6dd87..6947f776851b 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -548,6 +548,7 @@ struct kvm_mmu_notifier_range { } arg; gfn_handler_t handler; on_lock_fn_t on_lock; + on_unlock_fn_t before_unlock; on_unlock_fn_t on_unlock; bool flush_on_ret; bool may_block; @@ -644,6 +645,8 @@ static __always_inline int __kvm_handle_hva_range(struct kvm *kvm, kvm_flush_remote_tlbs(kvm); if (locked) { + if (!IS_KVM_NULL_FN(range->before_unlock)) + range->before_unlock(kvm); KVM_MMU_UNLOCK(kvm); if (!IS_KVM_NULL_FN(range->on_unlock)) range->on_unlock(kvm); @@ -668,6 +671,7 @@ static __always_inline int kvm_handle_hva_range(struct mmu_notifier *mn, .arg.pte = pte, .handler = handler, .on_lock = (void *)kvm_null_fn, + .before_unlock = (void *)kvm_null_fn, .on_unlock = (void *)kvm_null_fn, .flush_on_ret = true, .may_block = false, @@ -687,6 +691,7 @@ static __always_inline int kvm_handle_hva_range_no_flush(struct mmu_notifier *mn .end = end, .handler = handler, .on_lock = (void *)kvm_null_fn, + .before_unlock = (void *)kvm_null_fn, .on_unlock = (void *)kvm_null_fn, .flush_on_ret = false, .may_block = false, @@ -791,6 +796,7 @@ static int kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn, .end = range->end, .handler = kvm_mmu_unmap_gfn_range, .on_lock = kvm_mmu_invalidate_begin, + .before_unlock = (void *)kvm_null_fn, .on_unlock = kvm_arch_guest_memory_reclaimed, .flush_on_ret = true, .may_block = mmu_notifier_range_blockable(range), @@ -830,6 +836,8 @@ static int kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn, void kvm_mmu_invalidate_end(struct kvm *kvm) { + lockdep_assert_held_write(&kvm->mmu_lock); + /* * This sequence increase will notify the kvm page fault that * the page that is going to be mapped in the spte could have @@ -861,6 +869,7 @@ static void kvm_mmu_notifier_invalidate_range_end(struct mmu_notifier *mn, .end = range->end, .handler = (void *)kvm_null_fn, .on_lock = kvm_mmu_invalidate_end, + .before_unlock = (void *)kvm_null_fn, .on_unlock = (void *)kvm_null_fn, .flush_on_ret = false, .may_block = mmu_notifier_range_blockable(range), @@ -2466,6 +2475,8 @@ static __always_inline void kvm_handle_gfn_range(struct kvm *kvm, kvm_flush_remote_tlbs(kvm); if (locked) { + if (!IS_KVM_NULL_FN(range->before_unlock)) + range->before_unlock(kvm); KVM_MMU_UNLOCK(kvm); if (!IS_KVM_NULL_FN(range->on_unlock)) range->on_unlock(kvm); @@ -2480,6 +2491,7 @@ static int kvm_vm_set_mem_attributes(struct kvm *kvm, unsigned long attributes, .end = end, .handler = kvm_mmu_unmap_gfn_range, .on_lock = kvm_mmu_invalidate_begin, + .before_unlock = (void *)kvm_null_fn, .on_unlock = (void *)kvm_null_fn, .flush_on_ret = true, .may_block = true, @@ -2490,7 +2502,8 @@ static int kvm_vm_set_mem_attributes(struct kvm *kvm, unsigned long attributes, .arg.attributes = attributes, .handler = kvm_arch_post_set_memory_attributes, .on_lock = (void *)kvm_null_fn, - .on_unlock = kvm_mmu_invalidate_end, + .before_unlock = kvm_mmu_invalidate_end, + .on_unlock = (void *)kvm_null_fn, .may_block = true, }; unsigned long i;
On 7/19/2023 7:44 AM, Sean Christopherson wrote: > From: Chao Peng <chao.p.peng@linux.intel.com> > > In confidential computing usages, whether a page is private or shared is > necessary information for KVM to perform operations like page fault > handling, page zapping etc. There are other potential use cases for > per-page memory attributes, e.g. to make memory read-only (or no-exec, > or exec-only, etc.) without having to modify memslots. > > Introduce two ioctls (advertised by KVM_CAP_MEMORY_ATTRIBUTES) to allow > userspace to operate on the per-page memory attributes. > - KVM_SET_MEMORY_ATTRIBUTES to set the per-page memory attributes to > a guest memory range. > - KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES to return the KVM supported > memory attributes. > > Use an xarray to store the per-page attributes internally, with a naive, > not fully optimized implementation, i.e. prioritize correctness over > performance for the initial implementation. > > Because setting memory attributes is roughly analogous to mprotect() on > memory that is mapped into the guest, zap existing mappings prior to > updating the memory attributes. Opportunistically provide an arch hook > for the post-set path (needed to complete invalidation anyways) in s/anyways/anyway > anticipation of x86 needing the hook to update metadata related to > determining whether or not a given gfn can be backed with various sizes > of hugepages. > > It's possible that future usages may not require an invalidation, e.g. > if KVM ends up supporting RWX protections and userspace grants _more_ > protections, but again opt for simplicity and punt optimizations to > if/when they are needed. > > Suggested-by: Sean Christopherson <seanjc@google.com> > Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com > Cc: Fuad Tabba <tabba@google.com> > Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> > Co-developed-by: Sean Christopherson <seanjc@google.com> > Signed-off-by: Sean Christopherson <seanjc@google.com> > --- > Documentation/virt/kvm/api.rst | 60 ++++++++++++ > include/linux/kvm_host.h | 14 +++ > include/uapi/linux/kvm.h | 14 +++ > virt/kvm/Kconfig | 4 + > virt/kvm/kvm_main.c | 170 +++++++++++++++++++++++++++++++++ > 5 files changed, 262 insertions(+) > > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst > index 34d4ce66e0c8..0ca8561775ac 100644 > --- a/Documentation/virt/kvm/api.rst > +++ b/Documentation/virt/kvm/api.rst > @@ -6068,6 +6068,56 @@ writes to the CNTVCT_EL0 and CNTPCT_EL0 registers using the SET_ONE_REG > interface. No error will be returned, but the resulting offset will not be > applied. > > +4.139 KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES > +----------------------------------------- > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm ioctl > +:Parameters: u64 memory attributes bitmask(out) > +:Returns: 0 on success, <0 on error > + > +Returns supported memory attributes bitmask. Supported memory attributes will > +have the corresponding bits set in u64 memory attributes bitmask. > + > +The following memory attributes are defined:: > + > + #define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) > + > +4.140 KVM_SET_MEMORY_ATTRIBUTES > +----------------------------------------- > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm ioctl > +:Parameters: struct kvm_memory_attributes(in/out) > +:Returns: 0 on success, <0 on error > + > +Sets memory attributes for pages in a guest memory range. Parameters are > +specified via the following structure:: > + > + struct kvm_memory_attributes { > + __u64 address; > + __u64 size; > + __u64 attributes; > + __u64 flags; > + }; > + > +The user sets the per-page memory attributes to a guest memory range indicated > +by address/size, and in return KVM adjusts address and size to reflect the > +actual pages of the memory range have been successfully set to the attributes. > +If the call returns 0, "address" is updated to the last successful address + 1 > +and "size" is updated to the remaining address size that has not been set > +successfully. The user should check the return value as well as the size to > +decide if the operation succeeded for the whole range or not. The user may want > +to retry the operation with the returned address/size if the previous range was > +partially successful. > + > +Both address and size should be page aligned and the supported attributes can be > +retrieved with KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES. > + > +The "flags" field may be used for future extensions and should be set to 0s. > + > 5. The kvm_run structure > ======================== > > @@ -8494,6 +8544,16 @@ block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a > 64-bit bitmap (each bit describing a block size). The default value is > 0, to disable the eager page splitting. > > +8.41 KVM_CAP_MEMORY_ATTRIBUTES > +------------------------------ > + > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES > +:Architectures: x86 > +:Type: vm > + > +This capability indicates KVM supports per-page memory attributes and ioctls > +KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES/KVM_SET_MEMORY_ATTRIBUTES are available. > + > 9. Known KVM API problems > ========================= > > diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h > index e9ca49d451f3..97db63da6227 100644 > --- a/include/linux/kvm_host.h > +++ b/include/linux/kvm_host.h > @@ -264,6 +264,7 @@ struct kvm_gfn_range { > gfn_t end; > union { > pte_t pte; > + unsigned long attributes; > u64 raw; > } arg; > bool may_block; > @@ -809,6 +810,9 @@ struct kvm { > > #ifdef CONFIG_HAVE_KVM_PM_NOTIFIER > struct notifier_block pm_notifier; > +#endif > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + struct xarray mem_attr_array; > #endif > char stats_id[KVM_STATS_NAME_SIZE]; > }; > @@ -2301,4 +2305,14 @@ static inline void kvm_account_pgtable_pages(void *virt, int nr) > /* Max number of entries allowed for each kvm dirty ring */ > #define KVM_DIRTY_RING_MAX_ENTRIES 65536 > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > +static inline unsigned long kvm_get_memory_attributes(struct kvm *kvm, gfn_t gfn) > +{ > + return xa_to_value(xa_load(&kvm->mem_attr_array, gfn)); > +} > + > +bool kvm_arch_post_set_memory_attributes(struct kvm *kvm, > + struct kvm_gfn_range *range); > +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ > + > #endif > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h > index 6c6ed214b6ac..f065c57db327 100644 > --- a/include/uapi/linux/kvm.h > +++ b/include/uapi/linux/kvm.h > @@ -1211,6 +1211,7 @@ struct kvm_ppc_resize_hpt { > #define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228 > #define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229 > #define KVM_CAP_USER_MEMORY2 230 > +#define KVM_CAP_MEMORY_ATTRIBUTES 231 > > #ifdef KVM_CAP_IRQ_ROUTING > > @@ -2270,4 +2271,17 @@ struct kvm_s390_zpci_op { > /* flags for kvm_s390_zpci_op->u.reg_aen.flags */ > #define KVM_S390_ZPCIOP_REGAEN_HOST (1 << 0) > > +/* Available with KVM_CAP_MEMORY_ATTRIBUTES */ > +#define KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES _IOR(KVMIO, 0xd2, __u64) > +#define KVM_SET_MEMORY_ATTRIBUTES _IOW(KVMIO, 0xd3, struct kvm_memory_attributes) > + > +struct kvm_memory_attributes { > + __u64 address; > + __u64 size; > + __u64 attributes; > + __u64 flags; > +}; > + > +#define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) > + > #endif /* __LINUX_KVM_H */ > diff --git a/virt/kvm/Kconfig b/virt/kvm/Kconfig > index 2fa11bd26cfc..8375bc49f97d 100644 > --- a/virt/kvm/Kconfig > +++ b/virt/kvm/Kconfig > @@ -99,3 +99,7 @@ config KVM_GENERIC_HARDWARE_ENABLING > config KVM_GENERIC_MMU_NOTIFIER > select MMU_NOTIFIER > bool > + > +config KVM_GENERIC_MEMORY_ATTRIBUTES > + select KVM_GENERIC_MMU_NOTIFIER > + bool > diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c > index c14adf93daec..1a31bfa025b0 100644 > --- a/virt/kvm/kvm_main.c > +++ b/virt/kvm/kvm_main.c > @@ -530,6 +530,7 @@ struct kvm_mmu_notifier_range { > u64 end; > union { > pte_t pte; > + unsigned long attributes; > u64 raw; > } arg; > gfn_handler_t handler; > @@ -1175,6 +1176,9 @@ static struct kvm *kvm_create_vm(unsigned long type, const char *fdname) > spin_lock_init(&kvm->mn_invalidate_lock); > rcuwait_init(&kvm->mn_memslots_update_rcuwait); > xa_init(&kvm->vcpu_array); > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + xa_init(&kvm->mem_attr_array); > +#endif > > INIT_LIST_HEAD(&kvm->gpc_list); > spin_lock_init(&kvm->gpc_lock); > @@ -1346,6 +1350,9 @@ static void kvm_destroy_vm(struct kvm *kvm) > kvm_free_memslots(kvm, &kvm->__memslots[i][0]); > kvm_free_memslots(kvm, &kvm->__memslots[i][1]); > } > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + xa_destroy(&kvm->mem_attr_array); > +#endif > cleanup_srcu_struct(&kvm->irq_srcu); > cleanup_srcu_struct(&kvm->srcu); > kvm_arch_free_vm(kvm); > @@ -2346,6 +2353,145 @@ static int kvm_vm_ioctl_clear_dirty_log(struct kvm *kvm, > } > #endif /* CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT */ > > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > +static u64 kvm_supported_mem_attributes(struct kvm *kvm) > +{ > + return 0; > +} > + > +static __always_inline void kvm_handle_gfn_range(struct kvm *kvm, > + struct kvm_mmu_notifier_range *range) > +{ > + struct kvm_gfn_range gfn_range; > + struct kvm_memory_slot *slot; > + struct kvm_memslots *slots; > + struct kvm_memslot_iter iter; > + bool locked = false; > + bool ret = false; > + int i; > + > + gfn_range.arg.raw = range->arg.raw; > + gfn_range.may_block = range->may_block; > + > + for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) { > + slots = __kvm_memslots(kvm, i); > + > + kvm_for_each_memslot_in_gfn_range(&iter, slots, range->start, range->end) { > + slot = iter.slot; > + gfn_range.slot = slot; > + > + gfn_range.start = max(range->start, slot->base_gfn); > + gfn_range.end = min(range->end, slot->base_gfn + slot->npages); > + if (gfn_range.start >= gfn_range.end) > + continue; > + > + if (!locked) { > + locked = true; > + KVM_MMU_LOCK(kvm); > + if (!IS_KVM_NULL_FN(range->on_lock)) > + range->on_lock(kvm); > + } > + > + ret |= range->handler(kvm, &gfn_range); > + } > + } > + > + if (range->flush_on_ret && ret) > + kvm_flush_remote_tlbs(kvm); > + > + if (locked) { > + KVM_MMU_UNLOCK(kvm); > + if (!IS_KVM_NULL_FN(range->on_unlock)) > + range->on_unlock(kvm); > + } > +} > + > +static int kvm_vm_set_mem_attributes(struct kvm *kvm, unsigned long attributes, > + gfn_t start, gfn_t end) > +{ > + struct kvm_mmu_notifier_range unmap_range = { > + .start = start, > + .end = end, > + .handler = kvm_mmu_unmap_gfn_range, > + .on_lock = kvm_mmu_invalidate_begin, > + .on_unlock = (void *)kvm_null_fn, > + .flush_on_ret = true, > + .may_block = true, > + }; > + struct kvm_mmu_notifier_range post_set_range = { > + .start = start, > + .end = end, > + .arg.attributes = attributes, > + .handler = kvm_arch_post_set_memory_attributes, > + .on_lock = (void *)kvm_null_fn, > + .on_unlock = kvm_mmu_invalidate_end, > + .may_block = true, > + }; > + unsigned long i; > + void *entry; > + int r; > + > + entry = attributes ? xa_mk_value(attributes) : NULL; Why attributes of value 0 is considered not a value? Is it because 0 is not a valid value when RWX is considered in the future? > + > + mutex_lock(&kvm->slots_lock); > + > + /* > + * Reserve memory ahead of time to avoid having to deal with failures > + * partway through setting the new attributes. > + */ > + for (i = start; i < end; i++) { > + r = xa_reserve(&kvm->mem_attr_array, i, GFP_KERNEL_ACCOUNT); > + if (r) > + goto out_unlock; > + } > + > + kvm_handle_gfn_range(kvm, &unmap_range); > + > + for (i = start; i < end; i++) { > + r = xa_err(xa_store(&kvm->mem_attr_array, i, entry, > + GFP_KERNEL_ACCOUNT)); > + KVM_BUG_ON(r, kvm); > + } > + > + kvm_handle_gfn_range(kvm, &post_set_range); > + > +out_unlock: > + mutex_unlock(&kvm->slots_lock); > + > + return r; > +} > +static int kvm_vm_ioctl_set_mem_attributes(struct kvm *kvm, > + struct kvm_memory_attributes *attrs) > +{ > + gfn_t start, end; > + > + /* flags is currently not used. */ > + if (attrs->flags) > + return -EINVAL; > + if (attrs->attributes & ~kvm_supported_mem_attributes(kvm)) > + return -EINVAL; > + if (attrs->size == 0 || attrs->address + attrs->size < attrs->address) > + return -EINVAL; > + if (!PAGE_ALIGNED(attrs->address) || !PAGE_ALIGNED(attrs->size)) > + return -EINVAL; > + > + start = attrs->address >> PAGE_SHIFT; > + end = (attrs->address + attrs->size - 1 + PAGE_SIZE) >> PAGE_SHIFT; No need to handle the alignment again since both address and size are page aligned. > + > + if (WARN_ON_ONCE(start == end)) > + return -EINVAL; > + > + /* > + * xarray tracks data using "unsigned long", and as a result so does > + * KVM. For simplicity, supports generic attributes only on 64-bit > + * architectures. > + */ > + BUILD_BUG_ON(sizeof(attrs->attributes) != sizeof(unsigned long)); > + > + return kvm_vm_set_mem_attributes(kvm, attrs->attributes, start, end); > +} > +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ > + > struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn) > { > return __gfn_to_memslot(kvm_memslots(kvm), gfn); > @@ -4521,6 +4667,9 @@ static int kvm_vm_ioctl_check_extension_generic(struct kvm *kvm, long arg) > #ifdef CONFIG_HAVE_KVM_MSI > case KVM_CAP_SIGNAL_MSI: > #endif > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + case KVM_CAP_MEMORY_ATTRIBUTES: > +#endif > #ifdef CONFIG_HAVE_KVM_IRQFD > case KVM_CAP_IRQFD: > #endif > @@ -4937,6 +5086,27 @@ static long kvm_vm_ioctl(struct file *filp, > break; > } > #endif /* CONFIG_HAVE_KVM_IRQ_ROUTING */ > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES > + case KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES: { > + u64 attrs = kvm_supported_mem_attributes(kvm); > + > + r = -EFAULT; > + if (copy_to_user(argp, &attrs, sizeof(attrs))) > + goto out; > + r = 0; > + break; > + } > + case KVM_SET_MEMORY_ATTRIBUTES: { > + struct kvm_memory_attributes attrs; > + > + r = -EFAULT; > + if (copy_from_user(&attrs, argp, sizeof(attrs))) > + goto out; > + > + r = kvm_vm_ioctl_set_mem_attributes(kvm, &attrs); > + break; Both the changelog and the document added mention that the address and size of attrs will be updated to "reflect the actual pages of the memory range have been successfully set to the attributes", but it doesn't. > + } > +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ > case KVM_CREATE_DEVICE: { > struct kvm_create_device cd; >
On Mon, Aug 14, 2023, Binbin Wu wrote: > > On 7/19/2023 7:44 AM, Sean Christopherson wrote: > > + struct kvm_mmu_notifier_range post_set_range = { > > + .start = start, > > + .end = end, > > + .arg.attributes = attributes, > > + .handler = kvm_arch_post_set_memory_attributes, > > + .on_lock = (void *)kvm_null_fn, > > + .on_unlock = kvm_mmu_invalidate_end, > > + .may_block = true, > > + }; > > + unsigned long i; > > + void *entry; > > + int r; > > + > > + entry = attributes ? xa_mk_value(attributes) : NULL; > Why attributes of value 0 is considered not a value? Is it because 0 is not > a valid value when RWX is considered in the future? 0 values don't require an entry in the xarray, i.e. don't need to be stored and so don't consume memory. The potential conflict with a RWX=0 entry has already been noted, but we'll cross that bridge when we get to it, e.g. KVM can easily support RWX=0 by using an internal "valid" flag. > Both the changelog and the document added mention that the address and size > of attrs will be updated to > "reflect the actual pages of the memory range have been successfully set to > the attributes", but it doesn't. Yeah, on the todo list, all of the changelogs are horribly stale.
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 34d4ce66e0c8..0ca8561775ac 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -6068,6 +6068,56 @@ writes to the CNTVCT_EL0 and CNTPCT_EL0 registers using the SET_ONE_REG interface. No error will be returned, but the resulting offset will not be applied. +4.139 KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES +----------------------------------------- + +:Capability: KVM_CAP_MEMORY_ATTRIBUTES +:Architectures: x86 +:Type: vm ioctl +:Parameters: u64 memory attributes bitmask(out) +:Returns: 0 on success, <0 on error + +Returns supported memory attributes bitmask. Supported memory attributes will +have the corresponding bits set in u64 memory attributes bitmask. + +The following memory attributes are defined:: + + #define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) + +4.140 KVM_SET_MEMORY_ATTRIBUTES +----------------------------------------- + +:Capability: KVM_CAP_MEMORY_ATTRIBUTES +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_memory_attributes(in/out) +:Returns: 0 on success, <0 on error + +Sets memory attributes for pages in a guest memory range. Parameters are +specified via the following structure:: + + struct kvm_memory_attributes { + __u64 address; + __u64 size; + __u64 attributes; + __u64 flags; + }; + +The user sets the per-page memory attributes to a guest memory range indicated +by address/size, and in return KVM adjusts address and size to reflect the +actual pages of the memory range have been successfully set to the attributes. +If the call returns 0, "address" is updated to the last successful address + 1 +and "size" is updated to the remaining address size that has not been set +successfully. The user should check the return value as well as the size to +decide if the operation succeeded for the whole range or not. The user may want +to retry the operation with the returned address/size if the previous range was +partially successful. + +Both address and size should be page aligned and the supported attributes can be +retrieved with KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES. + +The "flags" field may be used for future extensions and should be set to 0s. + 5. The kvm_run structure ======================== @@ -8494,6 +8544,16 @@ block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a 64-bit bitmap (each bit describing a block size). The default value is 0, to disable the eager page splitting. +8.41 KVM_CAP_MEMORY_ATTRIBUTES +------------------------------ + +:Capability: KVM_CAP_MEMORY_ATTRIBUTES +:Architectures: x86 +:Type: vm + +This capability indicates KVM supports per-page memory attributes and ioctls +KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES/KVM_SET_MEMORY_ATTRIBUTES are available. + 9. Known KVM API problems ========================= diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index e9ca49d451f3..97db63da6227 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -264,6 +264,7 @@ struct kvm_gfn_range { gfn_t end; union { pte_t pte; + unsigned long attributes; u64 raw; } arg; bool may_block; @@ -809,6 +810,9 @@ struct kvm { #ifdef CONFIG_HAVE_KVM_PM_NOTIFIER struct notifier_block pm_notifier; +#endif +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES + struct xarray mem_attr_array; #endif char stats_id[KVM_STATS_NAME_SIZE]; }; @@ -2301,4 +2305,14 @@ static inline void kvm_account_pgtable_pages(void *virt, int nr) /* Max number of entries allowed for each kvm dirty ring */ #define KVM_DIRTY_RING_MAX_ENTRIES 65536 +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES +static inline unsigned long kvm_get_memory_attributes(struct kvm *kvm, gfn_t gfn) +{ + return xa_to_value(xa_load(&kvm->mem_attr_array, gfn)); +} + +bool kvm_arch_post_set_memory_attributes(struct kvm *kvm, + struct kvm_gfn_range *range); +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ + #endif diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 6c6ed214b6ac..f065c57db327 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1211,6 +1211,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228 #define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229 #define KVM_CAP_USER_MEMORY2 230 +#define KVM_CAP_MEMORY_ATTRIBUTES 231 #ifdef KVM_CAP_IRQ_ROUTING @@ -2270,4 +2271,17 @@ struct kvm_s390_zpci_op { /* flags for kvm_s390_zpci_op->u.reg_aen.flags */ #define KVM_S390_ZPCIOP_REGAEN_HOST (1 << 0) +/* Available with KVM_CAP_MEMORY_ATTRIBUTES */ +#define KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES _IOR(KVMIO, 0xd2, __u64) +#define KVM_SET_MEMORY_ATTRIBUTES _IOW(KVMIO, 0xd3, struct kvm_memory_attributes) + +struct kvm_memory_attributes { + __u64 address; + __u64 size; + __u64 attributes; + __u64 flags; +}; + +#define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) + #endif /* __LINUX_KVM_H */ diff --git a/virt/kvm/Kconfig b/virt/kvm/Kconfig index 2fa11bd26cfc..8375bc49f97d 100644 --- a/virt/kvm/Kconfig +++ b/virt/kvm/Kconfig @@ -99,3 +99,7 @@ config KVM_GENERIC_HARDWARE_ENABLING config KVM_GENERIC_MMU_NOTIFIER select MMU_NOTIFIER bool + +config KVM_GENERIC_MEMORY_ATTRIBUTES + select KVM_GENERIC_MMU_NOTIFIER + bool diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index c14adf93daec..1a31bfa025b0 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -530,6 +530,7 @@ struct kvm_mmu_notifier_range { u64 end; union { pte_t pte; + unsigned long attributes; u64 raw; } arg; gfn_handler_t handler; @@ -1175,6 +1176,9 @@ static struct kvm *kvm_create_vm(unsigned long type, const char *fdname) spin_lock_init(&kvm->mn_invalidate_lock); rcuwait_init(&kvm->mn_memslots_update_rcuwait); xa_init(&kvm->vcpu_array); +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES + xa_init(&kvm->mem_attr_array); +#endif INIT_LIST_HEAD(&kvm->gpc_list); spin_lock_init(&kvm->gpc_lock); @@ -1346,6 +1350,9 @@ static void kvm_destroy_vm(struct kvm *kvm) kvm_free_memslots(kvm, &kvm->__memslots[i][0]); kvm_free_memslots(kvm, &kvm->__memslots[i][1]); } +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES + xa_destroy(&kvm->mem_attr_array); +#endif cleanup_srcu_struct(&kvm->irq_srcu); cleanup_srcu_struct(&kvm->srcu); kvm_arch_free_vm(kvm); @@ -2346,6 +2353,145 @@ static int kvm_vm_ioctl_clear_dirty_log(struct kvm *kvm, } #endif /* CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT */ +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES +static u64 kvm_supported_mem_attributes(struct kvm *kvm) +{ + return 0; +} + +static __always_inline void kvm_handle_gfn_range(struct kvm *kvm, + struct kvm_mmu_notifier_range *range) +{ + struct kvm_gfn_range gfn_range; + struct kvm_memory_slot *slot; + struct kvm_memslots *slots; + struct kvm_memslot_iter iter; + bool locked = false; + bool ret = false; + int i; + + gfn_range.arg.raw = range->arg.raw; + gfn_range.may_block = range->may_block; + + for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) { + slots = __kvm_memslots(kvm, i); + + kvm_for_each_memslot_in_gfn_range(&iter, slots, range->start, range->end) { + slot = iter.slot; + gfn_range.slot = slot; + + gfn_range.start = max(range->start, slot->base_gfn); + gfn_range.end = min(range->end, slot->base_gfn + slot->npages); + if (gfn_range.start >= gfn_range.end) + continue; + + if (!locked) { + locked = true; + KVM_MMU_LOCK(kvm); + if (!IS_KVM_NULL_FN(range->on_lock)) + range->on_lock(kvm); + } + + ret |= range->handler(kvm, &gfn_range); + } + } + + if (range->flush_on_ret && ret) + kvm_flush_remote_tlbs(kvm); + + if (locked) { + KVM_MMU_UNLOCK(kvm); + if (!IS_KVM_NULL_FN(range->on_unlock)) + range->on_unlock(kvm); + } +} + +static int kvm_vm_set_mem_attributes(struct kvm *kvm, unsigned long attributes, + gfn_t start, gfn_t end) +{ + struct kvm_mmu_notifier_range unmap_range = { + .start = start, + .end = end, + .handler = kvm_mmu_unmap_gfn_range, + .on_lock = kvm_mmu_invalidate_begin, + .on_unlock = (void *)kvm_null_fn, + .flush_on_ret = true, + .may_block = true, + }; + struct kvm_mmu_notifier_range post_set_range = { + .start = start, + .end = end, + .arg.attributes = attributes, + .handler = kvm_arch_post_set_memory_attributes, + .on_lock = (void *)kvm_null_fn, + .on_unlock = kvm_mmu_invalidate_end, + .may_block = true, + }; + unsigned long i; + void *entry; + int r; + + entry = attributes ? xa_mk_value(attributes) : NULL; + + mutex_lock(&kvm->slots_lock); + + /* + * Reserve memory ahead of time to avoid having to deal with failures + * partway through setting the new attributes. + */ + for (i = start; i < end; i++) { + r = xa_reserve(&kvm->mem_attr_array, i, GFP_KERNEL_ACCOUNT); + if (r) + goto out_unlock; + } + + kvm_handle_gfn_range(kvm, &unmap_range); + + for (i = start; i < end; i++) { + r = xa_err(xa_store(&kvm->mem_attr_array, i, entry, + GFP_KERNEL_ACCOUNT)); + KVM_BUG_ON(r, kvm); + } + + kvm_handle_gfn_range(kvm, &post_set_range); + +out_unlock: + mutex_unlock(&kvm->slots_lock); + + return r; +} +static int kvm_vm_ioctl_set_mem_attributes(struct kvm *kvm, + struct kvm_memory_attributes *attrs) +{ + gfn_t start, end; + + /* flags is currently not used. */ + if (attrs->flags) + return -EINVAL; + if (attrs->attributes & ~kvm_supported_mem_attributes(kvm)) + return -EINVAL; + if (attrs->size == 0 || attrs->address + attrs->size < attrs->address) + return -EINVAL; + if (!PAGE_ALIGNED(attrs->address) || !PAGE_ALIGNED(attrs->size)) + return -EINVAL; + + start = attrs->address >> PAGE_SHIFT; + end = (attrs->address + attrs->size - 1 + PAGE_SIZE) >> PAGE_SHIFT; + + if (WARN_ON_ONCE(start == end)) + return -EINVAL; + + /* + * xarray tracks data using "unsigned long", and as a result so does + * KVM. For simplicity, supports generic attributes only on 64-bit + * architectures. + */ + BUILD_BUG_ON(sizeof(attrs->attributes) != sizeof(unsigned long)); + + return kvm_vm_set_mem_attributes(kvm, attrs->attributes, start, end); +} +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ + struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn) { return __gfn_to_memslot(kvm_memslots(kvm), gfn); @@ -4521,6 +4667,9 @@ static int kvm_vm_ioctl_check_extension_generic(struct kvm *kvm, long arg) #ifdef CONFIG_HAVE_KVM_MSI case KVM_CAP_SIGNAL_MSI: #endif +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES + case KVM_CAP_MEMORY_ATTRIBUTES: +#endif #ifdef CONFIG_HAVE_KVM_IRQFD case KVM_CAP_IRQFD: #endif @@ -4937,6 +5086,27 @@ static long kvm_vm_ioctl(struct file *filp, break; } #endif /* CONFIG_HAVE_KVM_IRQ_ROUTING */ +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES + case KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES: { + u64 attrs = kvm_supported_mem_attributes(kvm); + + r = -EFAULT; + if (copy_to_user(argp, &attrs, sizeof(attrs))) + goto out; + r = 0; + break; + } + case KVM_SET_MEMORY_ATTRIBUTES: { + struct kvm_memory_attributes attrs; + + r = -EFAULT; + if (copy_from_user(&attrs, argp, sizeof(attrs))) + goto out; + + r = kvm_vm_ioctl_set_mem_attributes(kvm, &attrs); + break; + } +#endif /* CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES */ case KVM_CREATE_DEVICE: { struct kvm_create_device cd;