| Message ID | 20230816164641.3371878-1-robimarko@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 92dab9ea5f389c12828283146c60054642453a91 |
| Headers | show |
| Series | [v3,1/4] dt-bindings: firmware: qcom,scm: support indicating SDI default state | expand |
On Wed, Aug 16, 2023 at 06:45:38PM +0200, Robert Marko wrote: > IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that > means that WDT being asserted or just trying to reboot will hang the board > in the debug mode and only pulling the power and repowering will help. > Some IPQ4019 boards like Google WiFI have it enabled as well. > > So, lets add a boolean property to indicate that SDI is enabled by default > and thus needs to be disabled by the kernel. > > Signed-off-by: Robert Marko <robimarko@gmail.com> The series looks good to me. Thanks for doing this! Reviewed-by: Brian Norris <computersforpeace@gmail.com>
On 16/08/2023 18:45, Robert Marko wrote: > IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that > means that WDT being asserted or just trying to reboot will hang the board > in the debug mode and only pulling the power and repowering will help. > Some IPQ4019 boards like Google WiFI have it enabled as well. > > So, lets add a boolean property to indicate that SDI is enabled by default > and thus needs to be disabled by the kernel. > > Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On 8/16/2023 10:15 PM, Robert Marko wrote: > IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that > means that WDT being asserted or just trying to reboot will hang the board > in the debug mode and only pulling the power and repowering will help. > Some IPQ4019 boards like Google WiFI have it enabled as well. > > So, lets add a boolean property to indicate that SDI is enabled by default > and thus needs to be disabled by the kernel. > > Signed-off-by: Robert Marko <robimarko@gmail.com> Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> -Mukesh > --- > Changes in v3: > * Change the property so it indicates that SDI has been enabled by default > --- > Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml > index 4233ea839bfc..590bbbd61de5 100644 > --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml > +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml > @@ -89,6 +89,14 @@ properties: > protocol to handle sleeping SCM calls. > maxItems: 1 > > + qcom,sdi-enabled: > + description: > + Indicates that the SDI (Secure Debug Image) has been enabled by TZ > + by default and it needs to be disabled. > + If not disabled WDT assertion or reboot will cause the board to hang > + in the debug mode. > + type: boolean > + > qcom,dload-mode: > $ref: /schemas/types.yaml#/definitions/phandle-array > items:
On Wed, 16 Aug 2023 18:45:38 +0200, Robert Marko wrote: > IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that > means that WDT being asserted or just trying to reboot will hang the board > in the debug mode and only pulling the power and repowering will help. > Some IPQ4019 boards like Google WiFI have it enabled as well. > > So, lets add a boolean property to indicate that SDI is enabled by default > and thus needs to be disabled by the kernel. > > [...] Applied, thanks! [4/4] arm64: dts: qcom: ipq5018: indicate that SDI should be disabled commit: 79796e87215db9587d6c66ec6f6781e091bc6464 Best regards,
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 4233ea839bfc..590bbbd61de5 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -89,6 +89,14 @@ properties: protocol to handle sleeping SCM calls. maxItems: 1 + qcom,sdi-enabled: + description: + Indicates that the SDI (Secure Debug Image) has been enabled by TZ + by default and it needs to be disabled. + If not disabled WDT assertion or reboot will cause the board to hang + in the debug mode. + type: boolean + qcom,dload-mode: $ref: /schemas/types.yaml#/definitions/phandle-array items:
IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that means that WDT being asserted or just trying to reboot will hang the board in the debug mode and only pulling the power and repowering will help. Some IPQ4019 boards like Google WiFI have it enabled as well. So, lets add a boolean property to indicate that SDI is enabled by default and thus needs to be disabled by the kernel. Signed-off-by: Robert Marko <robimarko@gmail.com> --- Changes in v3: * Change the property so it indicates that SDI has been enabled by default --- Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)