| Message ID | 20230823133938.1359106-12-lizetao1@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [-next,v2,01/25] spi: ar934x: Use helper function devm_clk_get_enabled() | expand |
On Wed, Aug 23, 2023 at 09:39:24PM +0800, Li Zetao wrote: > Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared > and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be > replaced by devm_clk_get_enabled() when driver enables (and possibly > prepares) the clocks for the whole lifetime of the device. Moreover, it is > no longer necessary to unprepare and disable the clocks explicitly. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Acked-by: Serge Semin <fancer.lancer@gmail.com> > Signed-off-by: Li Zetao <lizetao1@huawei.com> Just for the record, the tags order is normally supposed to reflect a patch route. Even though AFAICS it's explicitly defined for the Sob tags only (see Documentation/process/submitting-patches.rst), but almost all kernel developers apply that rule to all the tags. See the kernel git log as the brightest example. So your Sob tag should have been kept first, then either my Ab or Jonathan' Rb tags. -Serge(y) > --- > v1 -> v2: None > > drivers/spi/spi-dw-bt1.c | 23 +++++------------------ > 1 file changed, 5 insertions(+), 18 deletions(-) > > diff --git a/drivers/spi/spi-dw-bt1.c b/drivers/spi/spi-dw-bt1.c > index 5e1c01822967..5391bcac305c 100644 > --- a/drivers/spi/spi-dw-bt1.c > +++ b/drivers/spi/spi-dw-bt1.c > @@ -269,43 +269,32 @@ static int dw_spi_bt1_probe(struct platform_device *pdev) > > dws->paddr = mem->start; > > - dwsbt1->clk = devm_clk_get(&pdev->dev, NULL); > + dwsbt1->clk = devm_clk_get_enabled(&pdev->dev, NULL); > if (IS_ERR(dwsbt1->clk)) > return PTR_ERR(dwsbt1->clk); > > - ret = clk_prepare_enable(dwsbt1->clk); > - if (ret) > - return ret; > - > dws->bus_num = pdev->id; > dws->reg_io_width = 4; > dws->max_freq = clk_get_rate(dwsbt1->clk); > - if (!dws->max_freq) { > - ret = -EINVAL; > - goto err_disable_clk; > - } > + if (!dws->max_freq) > + return -EINVAL; > > init_func = device_get_match_data(&pdev->dev); > ret = init_func(pdev, dwsbt1); > if (ret) > - goto err_disable_clk; > + return ret; > > pm_runtime_enable(&pdev->dev); > > ret = dw_spi_add_host(&pdev->dev, dws); > if (ret) { > pm_runtime_disable(&pdev->dev); > - goto err_disable_clk; > + return ret; > } > > platform_set_drvdata(pdev, dwsbt1); > > return 0; > - > -err_disable_clk: > - clk_disable_unprepare(dwsbt1->clk); > - > - return ret; > } > > static void dw_spi_bt1_remove(struct platform_device *pdev) > @@ -315,8 +304,6 @@ static void dw_spi_bt1_remove(struct platform_device *pdev) > dw_spi_remove_host(&dwsbt1->dws); > > pm_runtime_disable(&pdev->dev); > - > - clk_disable_unprepare(dwsbt1->clk); > } > > static const struct of_device_id dw_spi_bt1_of_match[] = { > -- > 2.34.1 >
On Wed, 23 Aug 2023 17:35:35 +0300 Serge Semin <fancer.lancer@gmail.com> wrote: > On Wed, Aug 23, 2023 at 09:39:24PM +0800, Li Zetao wrote: > > Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared > > and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be > > replaced by devm_clk_get_enabled() when driver enables (and possibly > > prepares) the clocks for the whole lifetime of the device. Moreover, it is > > no longer necessary to unprepare and disable the clocks explicitly. > > > > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > Acked-by: Serge Semin <fancer.lancer@gmail.com> > > Signed-off-by: Li Zetao <lizetao1@huawei.com> > > Just for the record, the tags order is normally supposed to reflect a > patch route. Even though AFAICS it's explicitly defined for the Sob > tags only (see Documentation/process/submitting-patches.rst), but > almost all kernel developers apply that rule to all the tags. See the > kernel git log as the brightest example. So your Sob tag should have > been kept first, then either my Ab or Jonathan' Rb tags. There have been far too many discussions about this over the years. There is an argument (I'm not saying I agree with it) that tags given on an earlier version than the one posted should be before the SoB of the author on basis that the SoB is occurring later (as it's on the new version). That is a slightly stronger argument if there are changes to the patch, but then things get inconsistent between patches with minor changes and those without. *sigh* So this pattern is fairly common if a bit weird in my view :) Jonathan > > -Serge(y) > > > --- > > v1 -> v2: None > > > > drivers/spi/spi-dw-bt1.c | 23 +++++------------------ > > 1 file changed, 5 insertions(+), 18 deletions(-) > > > > diff --git a/drivers/spi/spi-dw-bt1.c b/drivers/spi/spi-dw-bt1.c > > index 5e1c01822967..5391bcac305c 100644 > > --- a/drivers/spi/spi-dw-bt1.c > > +++ b/drivers/spi/spi-dw-bt1.c > > @@ -269,43 +269,32 @@ static int dw_spi_bt1_probe(struct platform_device *pdev) > > > > dws->paddr = mem->start; > > > > - dwsbt1->clk = devm_clk_get(&pdev->dev, NULL); > > + dwsbt1->clk = devm_clk_get_enabled(&pdev->dev, NULL); > > if (IS_ERR(dwsbt1->clk)) > > return PTR_ERR(dwsbt1->clk); > > > > - ret = clk_prepare_enable(dwsbt1->clk); > > - if (ret) > > - return ret; > > - > > dws->bus_num = pdev->id; > > dws->reg_io_width = 4; > > dws->max_freq = clk_get_rate(dwsbt1->clk); > > - if (!dws->max_freq) { > > - ret = -EINVAL; > > - goto err_disable_clk; > > - } > > + if (!dws->max_freq) > > + return -EINVAL; > > > > init_func = device_get_match_data(&pdev->dev); > > ret = init_func(pdev, dwsbt1); > > if (ret) > > - goto err_disable_clk; > > + return ret; > > > > pm_runtime_enable(&pdev->dev); > > > > ret = dw_spi_add_host(&pdev->dev, dws); > > if (ret) { > > pm_runtime_disable(&pdev->dev); > > - goto err_disable_clk; > > + return ret; > > } > > > > platform_set_drvdata(pdev, dwsbt1); > > > > return 0; > > - > > -err_disable_clk: > > - clk_disable_unprepare(dwsbt1->clk); > > - > > - return ret; > > } > > > > static void dw_spi_bt1_remove(struct platform_device *pdev) > > @@ -315,8 +304,6 @@ static void dw_spi_bt1_remove(struct platform_device *pdev) > > dw_spi_remove_host(&dwsbt1->dws); > > > > pm_runtime_disable(&pdev->dev); > > - > > - clk_disable_unprepare(dwsbt1->clk); > > } > > > > static const struct of_device_id dw_spi_bt1_of_match[] = { > > -- > > 2.34.1 > >
On Wed, Aug 23, 2023 at 06:13:44PM +0100, Jonathan Cameron wrote: > On Wed, 23 Aug 2023 17:35:35 +0300 > Serge Semin <fancer.lancer@gmail.com> wrote: > > > On Wed, Aug 23, 2023 at 09:39:24PM +0800, Li Zetao wrote: > > > Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared > > > and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be > > > replaced by devm_clk_get_enabled() when driver enables (and possibly > > > prepares) the clocks for the whole lifetime of the device. Moreover, it is > > > no longer necessary to unprepare and disable the clocks explicitly. > > > > > > > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > Acked-by: Serge Semin <fancer.lancer@gmail.com> > > > Signed-off-by: Li Zetao <lizetao1@huawei.com> > > > > Just for the record, the tags order is normally supposed to reflect a > > patch route. Even though AFAICS it's explicitly defined for the Sob > > tags only (see Documentation/process/submitting-patches.rst), but > > almost all kernel developers apply that rule to all the tags. See the > > kernel git log as the brightest example. So your Sob tag should have > > been kept first, then either my Ab or Jonathan' Rb tags. > > There have been far too many discussions about this over the years. > There is an argument (I'm not saying I agree with it) that tags given > on an earlier version than the one posted should be before the SoB of > the author on basis that the SoB is occurring later (as it's on the new > version). That is a slightly stronger argument if there are changes > to the patch, but then things get inconsistent between patches with minor > changes and those without. *sigh* > > So this pattern is fairly common if a bit weird in my view :) Ah, I didn't know it was a holy-warring topic.) My judgement was based on the vast majority of commits in the kernel git log and on my experience in the patches review. Anyway in order not to raise it again let's consider my comment as a general note with no obligation towards the patch author.) -Serge(y) > > Jonathan > > > > > -Serge(y) > > > > > --- > > > v1 -> v2: None > > > > > > drivers/spi/spi-dw-bt1.c | 23 +++++------------------ > > > 1 file changed, 5 insertions(+), 18 deletions(-) > > > > > > diff --git a/drivers/spi/spi-dw-bt1.c b/drivers/spi/spi-dw-bt1.c > > > index 5e1c01822967..5391bcac305c 100644 > > > --- a/drivers/spi/spi-dw-bt1.c > > > +++ b/drivers/spi/spi-dw-bt1.c > > > @@ -269,43 +269,32 @@ static int dw_spi_bt1_probe(struct platform_device *pdev) > > > > > > dws->paddr = mem->start; > > > > > > - dwsbt1->clk = devm_clk_get(&pdev->dev, NULL); > > > + dwsbt1->clk = devm_clk_get_enabled(&pdev->dev, NULL); > > > if (IS_ERR(dwsbt1->clk)) > > > return PTR_ERR(dwsbt1->clk); > > > > > > - ret = clk_prepare_enable(dwsbt1->clk); > > > - if (ret) > > > - return ret; > > > - > > > dws->bus_num = pdev->id; > > > dws->reg_io_width = 4; > > > dws->max_freq = clk_get_rate(dwsbt1->clk); > > > - if (!dws->max_freq) { > > > - ret = -EINVAL; > > > - goto err_disable_clk; > > > - } > > > + if (!dws->max_freq) > > > + return -EINVAL; > > > > > > init_func = device_get_match_data(&pdev->dev); > > > ret = init_func(pdev, dwsbt1); > > > if (ret) > > > - goto err_disable_clk; > > > + return ret; > > > > > > pm_runtime_enable(&pdev->dev); > > > > > > ret = dw_spi_add_host(&pdev->dev, dws); > > > if (ret) { > > > pm_runtime_disable(&pdev->dev); > > > - goto err_disable_clk; > > > + return ret; > > > } > > > > > > platform_set_drvdata(pdev, dwsbt1); > > > > > > return 0; > > > - > > > -err_disable_clk: > > > - clk_disable_unprepare(dwsbt1->clk); > > > - > > > - return ret; > > > } > > > > > > static void dw_spi_bt1_remove(struct platform_device *pdev) > > > @@ -315,8 +304,6 @@ static void dw_spi_bt1_remove(struct platform_device *pdev) > > > dw_spi_remove_host(&dwsbt1->dws); > > > > > > pm_runtime_disable(&pdev->dev); > > > - > > > - clk_disable_unprepare(dwsbt1->clk); > > > } > > > > > > static const struct of_device_id dw_spi_bt1_of_match[] = { > > > -- > > > 2.34.1 > > > >
diff --git a/drivers/spi/spi-dw-bt1.c b/drivers/spi/spi-dw-bt1.c index 5e1c01822967..5391bcac305c 100644 --- a/drivers/spi/spi-dw-bt1.c +++ b/drivers/spi/spi-dw-bt1.c @@ -269,43 +269,32 @@ static int dw_spi_bt1_probe(struct platform_device *pdev) dws->paddr = mem->start; - dwsbt1->clk = devm_clk_get(&pdev->dev, NULL); + dwsbt1->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(dwsbt1->clk)) return PTR_ERR(dwsbt1->clk); - ret = clk_prepare_enable(dwsbt1->clk); - if (ret) - return ret; - dws->bus_num = pdev->id; dws->reg_io_width = 4; dws->max_freq = clk_get_rate(dwsbt1->clk); - if (!dws->max_freq) { - ret = -EINVAL; - goto err_disable_clk; - } + if (!dws->max_freq) + return -EINVAL; init_func = device_get_match_data(&pdev->dev); ret = init_func(pdev, dwsbt1); if (ret) - goto err_disable_clk; + return ret; pm_runtime_enable(&pdev->dev); ret = dw_spi_add_host(&pdev->dev, dws); if (ret) { pm_runtime_disable(&pdev->dev); - goto err_disable_clk; + return ret; } platform_set_drvdata(pdev, dwsbt1); return 0; - -err_disable_clk: - clk_disable_unprepare(dwsbt1->clk); - - return ret; } static void dw_spi_bt1_remove(struct platform_device *pdev) @@ -315,8 +304,6 @@ static void dw_spi_bt1_remove(struct platform_device *pdev) dw_spi_remove_host(&dwsbt1->dws); pm_runtime_disable(&pdev->dev); - - clk_disable_unprepare(dwsbt1->clk); } static const struct of_device_id dw_spi_bt1_of_match[] = {
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be replaced by devm_clk_get_enabled() when driver enables (and possibly prepares) the clocks for the whole lifetime of the device. Moreover, it is no longer necessary to unprepare and disable the clocks explicitly. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Li Zetao <lizetao1@huawei.com> --- v1 -> v2: None drivers/spi/spi-dw-bt1.c | 23 +++++------------------ 1 file changed, 5 insertions(+), 18 deletions(-)