| Message ID | 20230826022922.3457054-4-ruanjinjie@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: adc: at91_adc: Cleanup with the helpers | expand |
On Sat, 26 Aug 2023 10:29:22 +0800 Jinjie Ruan <ruanjinjie@huawei.com> wrote: > Use the dev_err_probe() helper to simplify error handling during probe. > This also handle scenario, when EDEFER is returned and useless error > is printed. > > Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> As I've asked for other changes so there will probably be another version anyway - a few trivial comments inline. Mostly you've hit the right balance on line breaks, but there are a few more I'd like to see with the aim of not going any longer than 80 chars than is necessary. Thanks, Jonathan > --- > drivers/iio/adc/at91_adc.c | 65 ++++++++++++++------------------------ > 1 file changed, 24 insertions(+), 41 deletions(-) > > diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c > index 2ac1b64f0fb7..a49f7021c73f 100644 > --- a/drivers/iio/adc/at91_adc.c > +++ b/drivers/iio/adc/at91_adc.c > @@ -1013,28 +1013,25 @@ static int at91_adc_probe(struct platform_device *pdev) > > st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers"); > > - if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) { > - dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n"); > - return -EINVAL; > - } > + if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) > + return dev_err_probe(&idev->dev, -EINVAL, > + "Missing adc-channels-used property in the DT.\n"); > st->channels_mask = prop; > > st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode"); > > - if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) { > - dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n"); > - return -EINVAL; > - } > + if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) > + return dev_err_probe(&idev->dev, -EINVAL, > + "Missing adc-startup-time property in the DT.\n"); > st->startup_time = prop; > > prop = 0; > of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop); > st->sample_hold_time = prop; > > - if (of_property_read_u32(node, "atmel,adc-vref", &prop)) { > - dev_err(&idev->dev, "Missing adc-vref property in the DT.\n"); > - return -EINVAL; > - } > + if (of_property_read_u32(node, "atmel,adc-vref", &prop)) > + return dev_err_probe(&idev->dev, -EINVAL, > + "Missing adc-vref property in the DT.\n"); > st->vref_mv = prop; > > st->res = st->caps->high_res_bits; > @@ -1069,7 +1066,6 @@ static int at91_adc_probe(struct platform_device *pdev) > if (IS_ERR(st->reg_base)) > return PTR_ERR(st->reg_base); > > - > /* > * Disable all IRQs before setting up the handler > */ > @@ -1084,26 +1080,18 @@ static int at91_adc_probe(struct platform_device *pdev) > ret = devm_request_irq(&pdev->dev, st->irq, > at91_adc_rl_interrupt, 0, > pdev->dev.driver->name, idev); > - if (ret) { > - dev_err(&pdev->dev, "Failed to allocate IRQ.\n"); > - return ret; > - } > + if (ret) > + return dev_err_probe(&pdev->dev, ret, "Failed to allocate IRQ.\n"); > > st->clk = devm_clk_get_enabled(&pdev->dev, "adc_clk"); > - if (IS_ERR(st->clk)) { > - dev_err(&pdev->dev, > - "Could not prepare or enable the clock.\n"); > - ret = PTR_ERR(st->clk); > - return ret; > - } > + if (IS_ERR(st->clk)) > + return dev_err_probe(&pdev->dev, PTR_ERR(st->clk), > + "Could not prepare or enable the clock.\n"); > > st->adc_clk = devm_clk_get_enabled(&pdev->dev, "adc_op_clk"); > - if (IS_ERR(st->adc_clk)) { > - dev_err(&pdev->dev, > - "Could not prepare or enable the ADC clock.\n"); > - ret = PTR_ERR(st->adc_clk); > - return ret; > - } > + if (IS_ERR(st->adc_clk)) > + return dev_err_probe(&pdev->dev, PTR_ERR(st->adc_clk), > + "Could not prepare or enable the ADC clock.\n"); > > /* > * Prescaler rate computation using the formula from the Atmel's > @@ -1119,10 +1107,8 @@ static int at91_adc_probe(struct platform_device *pdev) > > prsc = (mstrclk / (2 * adc_clk)) - 1; > > - if (!st->startup_time) { > - dev_err(&pdev->dev, "No startup time available.\n"); > - return -EINVAL; > - } > + if (!st->startup_time) > + return dev_err_probe(&pdev->dev, -EINVAL, "No startup time available.\n"); Add a line break before the " > ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz); > > /* > @@ -1147,10 +1133,8 @@ static int at91_adc_probe(struct platform_device *pdev) > > /* Setup the ADC channels available on the board */ > ret = at91_adc_channel_init(idev); > - if (ret < 0) { > - dev_err(&pdev->dev, "Couldn't initialize the channels.\n"); > - return ret; > - } > + if (ret < 0) > + return dev_err_probe(&pdev->dev, ret, "Couldn't initialize the channels.\n"); Line break before " > > init_waitqueue_head(&st->wq_data_avail); > mutex_init(&st->lock); > @@ -1162,10 +1146,9 @@ static int at91_adc_probe(struct platform_device *pdev) > */ > if (!st->touchscreen_type) { > ret = at91_adc_buffer_init(idev); > - if (ret < 0) { > - dev_err(&pdev->dev, "Couldn't initialize the buffer.\n"); > - return ret; > - } > + if (ret < 0) > + return dev_err_probe(&pdev->dev, ret, > + "Couldn't initialize the buffer.\n"); > > ret = at91_adc_trigger_init(idev); > if (ret < 0) {
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 2ac1b64f0fb7..a49f7021c73f 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -1013,28 +1013,25 @@ static int at91_adc_probe(struct platform_device *pdev) st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers"); - if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) { - dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n"); - return -EINVAL; - } + if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) + return dev_err_probe(&idev->dev, -EINVAL, + "Missing adc-channels-used property in the DT.\n"); st->channels_mask = prop; st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode"); - if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) { - dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n"); - return -EINVAL; - } + if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) + return dev_err_probe(&idev->dev, -EINVAL, + "Missing adc-startup-time property in the DT.\n"); st->startup_time = prop; prop = 0; of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop); st->sample_hold_time = prop; - if (of_property_read_u32(node, "atmel,adc-vref", &prop)) { - dev_err(&idev->dev, "Missing adc-vref property in the DT.\n"); - return -EINVAL; - } + if (of_property_read_u32(node, "atmel,adc-vref", &prop)) + return dev_err_probe(&idev->dev, -EINVAL, + "Missing adc-vref property in the DT.\n"); st->vref_mv = prop; st->res = st->caps->high_res_bits; @@ -1069,7 +1066,6 @@ static int at91_adc_probe(struct platform_device *pdev) if (IS_ERR(st->reg_base)) return PTR_ERR(st->reg_base); - /* * Disable all IRQs before setting up the handler */ @@ -1084,26 +1080,18 @@ static int at91_adc_probe(struct platform_device *pdev) ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_rl_interrupt, 0, pdev->dev.driver->name, idev); - if (ret) { - dev_err(&pdev->dev, "Failed to allocate IRQ.\n"); - return ret; - } + if (ret) + return dev_err_probe(&pdev->dev, ret, "Failed to allocate IRQ.\n"); st->clk = devm_clk_get_enabled(&pdev->dev, "adc_clk"); - if (IS_ERR(st->clk)) { - dev_err(&pdev->dev, - "Could not prepare or enable the clock.\n"); - ret = PTR_ERR(st->clk); - return ret; - } + if (IS_ERR(st->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(st->clk), + "Could not prepare or enable the clock.\n"); st->adc_clk = devm_clk_get_enabled(&pdev->dev, "adc_op_clk"); - if (IS_ERR(st->adc_clk)) { - dev_err(&pdev->dev, - "Could not prepare or enable the ADC clock.\n"); - ret = PTR_ERR(st->adc_clk); - return ret; - } + if (IS_ERR(st->adc_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(st->adc_clk), + "Could not prepare or enable the ADC clock.\n"); /* * Prescaler rate computation using the formula from the Atmel's @@ -1119,10 +1107,8 @@ static int at91_adc_probe(struct platform_device *pdev) prsc = (mstrclk / (2 * adc_clk)) - 1; - if (!st->startup_time) { - dev_err(&pdev->dev, "No startup time available.\n"); - return -EINVAL; - } + if (!st->startup_time) + return dev_err_probe(&pdev->dev, -EINVAL, "No startup time available.\n"); ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz); /* @@ -1147,10 +1133,8 @@ static int at91_adc_probe(struct platform_device *pdev) /* Setup the ADC channels available on the board */ ret = at91_adc_channel_init(idev); - if (ret < 0) { - dev_err(&pdev->dev, "Couldn't initialize the channels.\n"); - return ret; - } + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, "Couldn't initialize the channels.\n"); init_waitqueue_head(&st->wq_data_avail); mutex_init(&st->lock); @@ -1162,10 +1146,9 @@ static int at91_adc_probe(struct platform_device *pdev) */ if (!st->touchscreen_type) { ret = at91_adc_buffer_init(idev); - if (ret < 0) { - dev_err(&pdev->dev, "Couldn't initialize the buffer.\n"); - return ret; - } + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Couldn't initialize the buffer.\n"); ret = at91_adc_trigger_init(idev); if (ret < 0) {
Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- drivers/iio/adc/at91_adc.c | 65 ++++++++++++++------------------------ 1 file changed, 24 insertions(+), 41 deletions(-)