| Message ID | 20230830182038.878265-2-andreas@kemnade.info (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: omap: omap4-embt2ws: 32K clock for WLAN | expand |
On Wed, 30 Aug 2023 20:20:34 +0200, Andreas Kemnade wrote: > Convert the TWL[46]030 binding to DT schema format. To do it as a step by > step work, do not include / handle nodes for subdevices yet, just convert > things with minimal corrections. There are already some bindings for its > subdevices in the tree. > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > --- > .../devicetree/bindings/mfd/ti,twl.yaml | 69 +++++++++++++++++++ > .../devicetree/bindings/mfd/twl-family.txt | 46 ------------- > 2 files changed, 69 insertions(+), 46 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/ti,twl.yaml > delete mode 100644 Documentation/devicetree/bindings/mfd/twl-family.txt > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/mfd/ti,twl.example.dtb: /example-0/i2c/pmic@48/rtc: failed to match any schema with compatible: ['ti,twl4030-rtc'] doc reference errors (make refcheckdocs): Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt: Documentation/devicetree/bindings/mfd/twl-family.txt See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230830182038.878265-2-andreas@kemnade.info The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 30/08/2023 20:20, Andreas Kemnade wrote: > Convert the TWL[46]030 binding to DT schema format. To do it as a step by > step work, do not include / handle nodes for subdevices yet, just convert > things with minimal corrections. There are already some bindings for its > subdevices in the tree. > ... > +properties: > + compatible: > + description: > + TWL4030 for integrated power-management/audio CODEC device used in OMAP3 > + based boards > + TWL6030/32 for integrated power-management used in OMAP4 based boards > + enum: > + - ti,twl4030 > + - ti,twl6030 > + - ti,twl6032 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + interrupt-controller: true > + > + "#interrupt-cells": > + const: 1 > + > +additionalProperties: true No, this must be false. example-schema and all device bindings require this to be false. Having it true makes the schema basically no-op, so why do you need it? Best regards, Krzysztof
* Andreas Kemnade <andreas@kemnade.info> [230830 18:20]: > +title: Texas Instruments TWL family > + > +maintainers: > + - Tony Lindgren <tony@atomide.com> s/me/you/ above please :) Regards, Tony
diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml new file mode 100644 index 0000000000000..3d7b3e0addafa --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,twl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TWL family + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: | + The TWLs are Integrated Power Management Chips. + Some version might contain much more analog function like + USB transceiver or Audio amplifier. + These chips are connected to an i2c bus. + +properties: + compatible: + description: + TWL4030 for integrated power-management/audio CODEC device used in OMAP3 + based boards + TWL6030/32 for integrated power-management used in OMAP4 based boards + enum: + - ti,twl4030 + - ti,twl6030 + - ti,twl6032 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + +additionalProperties: true + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@48 { + compatible = "ti,twl6030"; + reg = <0x48>; + interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/mfd/twl-family.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt deleted file mode 100644 index c2f9302965dea..0000000000000 --- a/Documentation/devicetree/bindings/mfd/twl-family.txt +++ /dev/null @@ -1,46 +0,0 @@ -Texas Instruments TWL family - -The TWLs are Integrated Power Management Chips. -Some version might contain much more analog function like -USB transceiver or Audio amplifier. -These chips are connected to an i2c bus. - - -Required properties: -- compatible : Must be "ti,twl4030"; - For Integrated power-management/audio CODEC device used in OMAP3 - based boards -- compatible : Must be "ti,twl6030"; - For Integrated power-management used in OMAP4 based boards -- interrupts : This i2c device has an IRQ line connected to the main SoC -- interrupt-controller : Since the twl support several interrupts internally, - it is considered as an interrupt controller cascaded to the SoC one. -- #interrupt-cells = <1>; - -Optional node: -- Child nodes contain in the twl. The twl family is made of several variants - that support a different number of features. - The children nodes will thus depend of the capability of the variant. - - -Example: -/* - * Integrated Power Management Chip - * https://www.ti.com/lit/ds/symlink/twl6030.pdf - */ -twl@48 { - compatible = "ti,twl6030"; - reg = <0x48>; - interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <0>; - - twl_rtc { - compatible = "ti,twl_rtc"; - interrupts = <11>; - reg = <0>; - }; -};
Convert the TWL[46]030 binding to DT schema format. To do it as a step by step work, do not include / handle nodes for subdevices yet, just convert things with minimal corrections. There are already some bindings for its subdevices in the tree. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- .../devicetree/bindings/mfd/ti,twl.yaml | 69 +++++++++++++++++++ .../devicetree/bindings/mfd/twl-family.txt | 46 ------------- 2 files changed, 69 insertions(+), 46 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/ti,twl.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/twl-family.txt