Message ID | 20230912-spmi-pm8909-v1-3-ba4b3bfaf87d@gerhold.net (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | regulator: qcom_spmi: Add PM8909, PM8019 and PMA8084 | expand |
On Tue, 12 Sep 2023 09:49:51 +0200, Stephan Gerhold wrote: > Document the qcom,pm8019-regulators compatible together with the > necessary supply properties to allow interfacing via the hardware > regulator registers directly via SPMI. This is mainly intended for > debugging since the regulators are typically controlled via the RPM > firmware (qcom,rpm-pm8019-regulators compatible). > > Signed-off-by: Stephan Gerhold <stephan@gerhold.net> > --- > .../bindings/regulator/qcom,spmi-regulator.yaml | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml index 765c31246cc7..fe6898a89ea1 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml @@ -17,6 +17,7 @@ properties: - qcom,pm660l-regulators - qcom,pm8004-regulators - qcom,pm8005-regulators + - qcom,pm8019-regulators - qcom,pm8226-regulators - qcom,pm8841-regulators - qcom,pm8909-regulators @@ -177,6 +178,25 @@ allOf: patternProperties: "^vdd_s[1-4]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8019-regulators + then: + properties: + vdd_l1-supply: true + vdd_l2_l3-supply: true + vdd_l4_l5_l6-supply: true + vdd_l7_l8_l11-supply: true + vdd_l9-supply: true + vdd_l10-supply: true + vdd_l12-supply: true + vdd_l13_l14-supply: true + patternProperties: + "^vdd_s[1-4]-supply$": true + - if: properties: compatible:
Document the qcom,pm8019-regulators compatible together with the necessary supply properties to allow interfacing via the hardware regulator registers directly via SPMI. This is mainly intended for debugging since the regulators are typically controlled via the RPM firmware (qcom,rpm-pm8019-regulators compatible). Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- .../bindings/regulator/qcom,spmi-regulator.yaml | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)