| Message ID | 20230916110902.234273-9-arinc.unal@arinc9.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | define and enforce phylink bindings | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/apply | fail | Patch does not apply to net-next |
> +properties: > + compatible: > + oneOf: > + - description: | > + Switch has base address 0x10. Use with models: > + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, > + 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 > + const: marvell,mv88e6085 The .txt file contained: The compatibility string is used only to find an identification register, which is at a different MDIO base address in different switch families. Please keep this text. There has been a lot of confusion in the past, lots of circular arguments etc, and it is way too late to do anything different. So i want to make it clear what the compatible is used for, juts to find the ID registers, nothing more. > + > + - description: | > + Switch has base address 0x00. Use with models: > + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X The .txt file is missing the 6191X and 6393X, which belong here. If you need to respin, please could you add them here. Andrew
On Sat, 16 Sep 2023 14:09:00 +0300, Arınç ÜNAL wrote: > Convert the document for Marvell ethernet switches to json-schema. > > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> > --- > .../devicetree/bindings/net/dsa/marvell.txt | 109 ---------- > .../devicetree/bindings/net/dsa/marvell.yaml | 204 ++++++++++++++++++ > 2 files changed, 204 insertions(+), 109 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.txt > create mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell.yaml# Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 966, in resolve_fragment document = document[part] ~~~~~~~~^^^^^^ KeyError: '$defs' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/local/bin/dt-validate", line 146, in <module> sg.check_dtb(filename) File "/usr/local/bin/dt-validate", line 96, in check_dtb self.check_subtree(dt, subtree, False, "/", "/", filename) File "/usr/local/bin/dt-validate", line 89, in check_subtree self.check_subtree(tree, value, disabled, name, fullname + name, filename) File "/usr/local/bin/dt-validate", line 89, in check_subtree self.check_subtree(tree, value, disabled, name, fullname + name, filename) File "/usr/local/bin/dt-validate", line 89, in check_subtree self.check_subtree(tree, value, disabled, name, fullname + name, filename) File "/usr/local/bin/dt-validate", line 84, in check_subtree self.check_node(tree, subtree, disabled, nodename, fullname, filename) File "/usr/local/bin/dt-validate", line 40, in check_node for error in self.validator.iter_errors(node, filter=match_schema_file): File "/usr/local/lib/python3.11/dist-packages/dtschema/validator.py", line 391, in iter_errors for error in self.DtValidator(sch, File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 288, in iter_errors for error in errors: File "/usr/local/lib/python3.11/dist-packages/jsonschema/_validators.py", line 414, in if_ yield from validator.descend(instance, then, schema_path="then") File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 305, in descend for error in self.evolve(schema=schema).iter_errors(instance): File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 288, in iter_errors for error in errors: File "/usr/local/lib/python3.11/dist-packages/jsonschema/_validators.py", line 362, in allOf yield from validator.descend(instance, subschema, schema_path=index) File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 305, in descend for error in self.evolve(schema=schema).iter_errors(instance): File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 288, in iter_errors for error in errors: File "/usr/local/lib/python3.11/dist-packages/jsonschema/_validators.py", line 414, in if_ yield from validator.descend(instance, then, schema_path="then") File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 305, in descend for error in self.evolve(schema=schema).iter_errors(instance): File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 288, in iter_errors for error in errors: File "/usr/local/lib/python3.11/dist-packages/jsonschema/_validators.py", line 25, in patternProperties yield from validator.descend( File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 305, in descend for error in self.evolve(schema=schema).iter_errors(instance): File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 288, in iter_errors for error in errors: File "/usr/local/lib/python3.11/dist-packages/jsonschema/_validators.py", line 25, in patternProperties yield from validator.descend( File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 305, in descend for error in self.evolve(schema=schema).iter_errors(instance): File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 288, in iter_errors for error in errors: File "/usr/local/lib/python3.11/dist-packages/jsonschema/_validators.py", line 294, in ref scope, resolved = validator.resolver.resolve(ref) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 898, in resolve return url, self._remote_cache(url) ^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 916, in resolve_from_url return self.resolve_fragment(document, fragment) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 968, in resolve_fragment raise exceptions.RefResolutionError( jsonschema.exceptions.RefResolutionError: Unresolvable JSON pointer: '$defs/phylink' doc reference errors (make refcheckdocs): Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/net/dsa/marvell.txt MAINTAINERS: Documentation/devicetree/bindings/net/dsa/marvell.txt See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230916110902.234273-9-arinc.unal@arinc9.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 16.09.2023 17:05, Andrew Lunn wrote: >> +properties: >> + compatible: >> + oneOf: >> + - description: | >> + Switch has base address 0x10. Use with models: >> + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, >> + 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 >> + const: marvell,mv88e6085 > > The .txt file contained: > > The compatibility string is used only to find an identification > register, which is at a different MDIO base address in different > switch families. > > Please keep this text. There has been a lot of confusion in the past, > lots of circular arguments etc, and it is way too late to do anything > different. So i want to make it clear what the compatible is used for, > juts to find the ID registers, nothing more. Will do. > >> + >> + - description: | >> + Switch has base address 0x00. Use with models: >> + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X > > The .txt file is missing the 6191X and 6393X, which belong here. If > you need to respin, please could you add them here. Will do. Arınç
On Sat, Sep 16, 2023 at 02:09:00PM +0300, Arınç ÜNAL wrote: > Convert the document for Marvell ethernet switches to json-schema. > > Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> > --- > .../devicetree/bindings/net/dsa/marvell.txt | 109 ---------- > .../devicetree/bindings/net/dsa/marvell.yaml | 204 ++++++++++++++++++ > 2 files changed, 204 insertions(+), 109 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.txt > create mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.yaml > > diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt > deleted file mode 100644 > index 6ec0c181b6db..000000000000 > --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt > +++ /dev/null > @@ -1,109 +0,0 @@ > -Marvell DSA Switch Device Tree Bindings > ---------------------------------------- > - > -WARNING: This binding is currently unstable. Do not program it into a > -FLASH never to be changed again. Once this binding is stable, this > -warning will be removed. > - > -If you need a stable binding, use the old dsa.txt binding. > - > -Marvell Switches are MDIO devices. The following properties should be > -placed as a child node of an mdio device. > - > -The properties described here are those specific to Marvell devices. > -Additional required and optional properties can be found in dsa.txt. > - > -The compatibility string is used only to find an identification register, > -which is at a different MDIO base address in different switch families. > -- "marvell,mv88e6085" : Switch has base address 0x10. Use with models: > - 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, > - 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, > - 6341, 6350, 6351, 6352 > -- "marvell,mv88e6190" : Switch has base address 0x00. Use with models: > - 6190, 6190X, 6191, 6290, 6361, 6390, 6390X > -- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: > - 6220, 6250 > - > -Required properties: > -- compatible : Should be one of "marvell,mv88e6085", > - "marvell,mv88e6190" or "marvell,mv88e6250" as > - indicated above > -- reg : Address on the MII bus for the switch. > - > -Optional properties: > - > -- reset-gpios : Should be a gpio specifier for a reset line > -- interrupts : Interrupt from the switch > -- interrupt-controller : Indicates the switch is itself an interrupt > - controller. This is used for the PHY interrupts. > -#interrupt-cells = <2> : Controller uses two cells, number and flag > -- eeprom-length : Set to the length of an EEPROM connected to the > - switch. Must be set if the switch can not detect > - the presence and/or size of a connected EEPROM, > - otherwise optional. > -- mdio : Container of PHY and devices on the switches MDIO > - bus. > -- mdio? : Container of PHYs and devices on the external MDIO > - bus. The node must contains a compatible string of > - "marvell,mv88e6xxx-mdio-external" > - > -Example: > - > - mdio { > - #address-cells = <1>; > - #size-cells = <0>; > - interrupt-parent = <&gpio0>; > - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; > - interrupt-controller; > - #interrupt-cells = <2>; > - > - switch0: switch@0 { > - compatible = "marvell,mv88e6085"; > - reg = <0>; > - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; > - > - mdio { > - #address-cells = <1>; > - #size-cells = <0>; > - switch1phy0: switch1phy0@0 { > - reg = <0>; > - interrupt-parent = <&switch0>; > - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > - }; > - }; > - }; > - }; > - > - mdio { > - #address-cells = <1>; > - #size-cells = <0>; > - interrupt-parent = <&gpio0>; > - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; > - interrupt-controller; > - #interrupt-cells = <2>; > - > - switch0: switch@0 { > - compatible = "marvell,mv88e6190"; > - reg = <0>; > - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; > - > - mdio { > - #address-cells = <1>; > - #size-cells = <0>; > - switch1phy0: switch1phy0@0 { > - reg = <0>; > - interrupt-parent = <&switch0>; > - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > - }; > - }; > - > - mdio1 { > - compatible = "marvell,mv88e6xxx-mdio-external"; > - #address-cells = <1>; > - #size-cells = <0>; > - switch1phy9: switch1phy0@9 { > - reg = <9>; > - }; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.yaml b/Documentation/devicetree/bindings/net/dsa/marvell.yaml > new file mode 100644 > index 000000000000..45756b8d74d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/dsa/marvell.yaml > @@ -0,0 +1,204 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/dsa/marvell.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Marvell Ethernet Switches > + > +$ref: dsa.yaml#/$defs/ethernet-ports > + > +maintainers: > + - Andrew Lunn <andrew@lunn.ch> > + - Arınç ÜNAL <arinc.unal@arinc9.com> > + > +description: > + Marvell ethernet switches are MDIO devices. > + > +properties: > + compatible: > + oneOf: > + - description: | > + Switch has base address 0x10. Use with models: > + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, > + 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 > + const: marvell,mv88e6085 > + > + - description: | > + Switch has base address 0x00. Use with models: > + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X > + const: marvell,mv88e6190 > + > + - description: | > + Switch has base address 0x08 or 0x18. Use with models: > + 6220, 6250 > + const: marvell,mv88e6250 > + > + reg: > + maxItems: 1 > + > + reset-gpios: > + description: GPIO to be used to reset the whole device > + maxItems: 1 > + > + "#interrupt-cells": > + const: 2 > + > + interrupt-controller: true > + > + interrupts: > + maxItems: 1 > + > + eeprom-length: > + description: > + Set to the length of an EEPROM connected to the switch. Must be set if the > + switch can not detect the presence and/or size of a connected EEPROM, > + otherwise optional. > + > + mdio: > + description: > + The optional node for the MDIO bus of the switch. The bus will be > + registered non-OF-based if this is not defined. That's a detail of the OS behavior. > + $ref: /schemas/net/mdio.yaml# unevaluatedProperties: false > + > + mdio-external: > + description: The externally reachable MDIO bus of the 6390 family switches > + $ref: /schemas/net/mdio.yaml# unevaluatedProperties: false > + > + properties: > + compatible: > + const: marvell,mv88e6xxx-mdio-external > + > + required: > + - compatible > + > +required: > + - compatible > + - reg > + > +allOf: > + - if: > + properties: > + compatible: > + enum: > + - marvell,mv88e6085 > + - marvell,mv88e6250 > + then: > + properties: > + mdio-external: false > + > + - if: > + required: [ mdio ] > + then: > + patternProperties: > + "^(ethernet-)?ports$": > + patternProperties: > + "^(ethernet-)?port@[0-9]+$": > + $ref: /schemas/net/ethernet-controller.yaml#/$defs/phylink This probably doesn't work right. The problem is every node ultimately needs a single schema with all possible properties in order to not allow undefined properties. This is the reason for the complexity with a $ref at each level in schemas for these nodes. I'm not sure it is worth the complexity to enforce what you want here. It may be easier to just always allow phylink properties in ethernet-port nodes. As this is a switch, it should be referencing ethernet-switch.yaml. Rob
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt deleted file mode 100644 index 6ec0c181b6db..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ /dev/null @@ -1,109 +0,0 @@ -Marvell DSA Switch Device Tree Bindings ---------------------------------------- - -WARNING: This binding is currently unstable. Do not program it into a -FLASH never to be changed again. Once this binding is stable, this -warning will be removed. - -If you need a stable binding, use the old dsa.txt binding. - -Marvell Switches are MDIO devices. The following properties should be -placed as a child node of an mdio device. - -The properties described here are those specific to Marvell devices. -Additional required and optional properties can be found in dsa.txt. - -The compatibility string is used only to find an identification register, -which is at a different MDIO base address in different switch families. -- "marvell,mv88e6085" : Switch has base address 0x10. Use with models: - 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, - 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, - 6341, 6350, 6351, 6352 -- "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6190, 6190X, 6191, 6290, 6361, 6390, 6390X -- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: - 6220, 6250 - -Required properties: -- compatible : Should be one of "marvell,mv88e6085", - "marvell,mv88e6190" or "marvell,mv88e6250" as - indicated above -- reg : Address on the MII bus for the switch. - -Optional properties: - -- reset-gpios : Should be a gpio specifier for a reset line -- interrupts : Interrupt from the switch -- interrupt-controller : Indicates the switch is itself an interrupt - controller. This is used for the PHY interrupts. -#interrupt-cells = <2> : Controller uses two cells, number and flag -- eeprom-length : Set to the length of an EEPROM connected to the - switch. Must be set if the switch can not detect - the presence and/or size of a connected EEPROM, - otherwise optional. -- mdio : Container of PHY and devices on the switches MDIO - bus. -- mdio? : Container of PHYs and devices on the external MDIO - bus. The node must contains a compatible string of - "marvell,mv88e6xxx-mdio-external" - -Example: - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6190"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.yaml b/Documentation/devicetree/bindings/net/dsa/marvell.yaml new file mode 100644 index 000000000000..45756b8d74d9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/marvell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Ethernet Switches + +$ref: dsa.yaml#/$defs/ethernet-ports + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Arınç ÜNAL <arinc.unal@arinc9.com> + +description: + Marvell ethernet switches are MDIO devices. + +properties: + compatible: + oneOf: + - description: | + Switch has base address 0x10. Use with models: + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, + 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 + const: marvell,mv88e6085 + + - description: | + Switch has base address 0x00. Use with models: + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X + const: marvell,mv88e6190 + + - description: | + Switch has base address 0x08 or 0x18. Use with models: + 6220, 6250 + const: marvell,mv88e6250 + + reg: + maxItems: 1 + + reset-gpios: + description: GPIO to be used to reset the whole device + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + interrupts: + maxItems: 1 + + eeprom-length: + description: + Set to the length of an EEPROM connected to the switch. Must be set if the + switch can not detect the presence and/or size of a connected EEPROM, + otherwise optional. + + mdio: + description: + The optional node for the MDIO bus of the switch. The bus will be + registered non-OF-based if this is not defined. + $ref: /schemas/net/mdio.yaml# + + mdio-external: + description: The externally reachable MDIO bus of the 6390 family switches + $ref: /schemas/net/mdio.yaml# + + properties: + compatible: + const: marvell,mv88e6xxx-mdio-external + + required: + - compatible + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + enum: + - marvell,mv88e6085 + - marvell,mv88e6250 + then: + properties: + mdio-external: false + + - if: + required: [ mdio ] + then: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9]+$": + $ref: /schemas/net/ethernet-controller.yaml#/$defs/phylink + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "rmii"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "swp1"; + }; + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch: switch@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "rmii"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "swp1"; + phy-handle = <ðphy1>; + }; + + port@2 { + reg = <2>; + label = "swp2"; + phy-handle = <&ext_ethphy0>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&switch>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + mdio-external { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + ext_ethphy0: ethernet-phy@0 { + reg = <0>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + };
Convert the document for Marvell ethernet switches to json-schema. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> --- .../devicetree/bindings/net/dsa/marvell.txt | 109 ---------- .../devicetree/bindings/net/dsa/marvell.yaml | 204 ++++++++++++++++++ 2 files changed, 204 insertions(+), 109 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.txt create mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.yaml