| Message ID | 20230919102948.1844909-1-quic_srichara@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [V6] PCI: qcom: Fix broken pcie enumeration for 2_3_3 configs ops | expand |
On Tue, Sep 19, 2023 at 03:59:48PM +0530, Sricharan Ramabadhran wrote: > PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for qcom_pcie_post_init_2_3_3. > PCIe slave address space size register offset is 0x358, but was wrongly > changed to 0x16c as a part of commit 39171b33f652 ("PCI: qcom: Remove > PCIE20_ prefix from register definitions"). Fixing it, by using the right > macro and remove the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3. > > Without this access to the registers of slave addr space like iATU etc > are broken leading to PCIe enumeration failure on IPQ8074. > > Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions") > Cc: <Stable@vger.kernel.org> Please fix the stable list address: stable@vger.kernel.org - Mani > Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Tested-by: Robert Marko <robimarko@gmail.com> > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > --- > [V6] Fixed subject and commit text as per Bjorn Helgaas > > drivers/pci/controller/dwc/pcie-qcom.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index e2f29404c84e..64420ecc24d1 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -43,7 +43,6 @@ > #define PARF_PHY_REFCLK 0x4c > #define PARF_CONFIG_BITS 0x50 > #define PARF_DBI_BASE_ADDR 0x168 > -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */ > #define PARF_MHI_CLOCK_RESET_CTRL 0x174 > #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178 > #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8 > @@ -797,8 +796,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie) > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > u32 val; > > - writel(SLV_ADDR_SPACE_SZ, > - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3); > + writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > > val = readl(pcie->parf + PARF_PHY_CTRL); > val &= ~PHY_TEST_PWR_DOWN; > -- > 2.34.1 >
On Tue, Sep 19, 2023 at 02:19:09PM +0200, Manivannan Sadhasivam wrote: > On Tue, Sep 19, 2023 at 03:59:48PM +0530, Sricharan Ramabadhran wrote: > > PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for qcom_pcie_post_init_2_3_3. > > PCIe slave address space size register offset is 0x358, but was wrongly > > changed to 0x16c as a part of commit 39171b33f652 ("PCI: qcom: Remove > > PCIE20_ prefix from register definitions"). Fixing it, by using the right > > macro and remove the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3. > > > > Without this access to the registers of slave addr space like iATU etc > > are broken leading to PCIe enumeration failure on IPQ8074. > > > > Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions") > > Cc: <Stable@vger.kernel.org> > > Please fix the stable list address: stable@vger.kernel.org Either works!
On Tue, Sep 19, 2023 at 03:59:48PM +0530, Sricharan Ramabadhran wrote: > PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for qcom_pcie_post_init_2_3_3. > PCIe slave address space size register offset is 0x358, but was wrongly > changed to 0x16c as a part of commit 39171b33f652 ("PCI: qcom: Remove > PCIE20_ prefix from register definitions"). Fixing it, by using the right > macro and remove the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3. > > Without this access to the registers of slave addr space like iATU etc > are broken leading to PCIe enumeration failure on IPQ8074. > > Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions") > Cc: <Stable@vger.kernel.org> > Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Tested-by: Robert Marko <robimarko@gmail.com> > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Applied to for-linus for v6.6, thanks! > --- > [V6] Fixed subject and commit text as per Bjorn Helgaas > > drivers/pci/controller/dwc/pcie-qcom.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index e2f29404c84e..64420ecc24d1 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -43,7 +43,6 @@ > #define PARF_PHY_REFCLK 0x4c > #define PARF_CONFIG_BITS 0x50 > #define PARF_DBI_BASE_ADDR 0x168 > -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */ > #define PARF_MHI_CLOCK_RESET_CTRL 0x174 > #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178 > #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8 > @@ -797,8 +796,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie) > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > u32 val; > > - writel(SLV_ADDR_SPACE_SZ, > - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3); > + writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); > > val = readl(pcie->parf + PARF_PHY_CTRL); > val &= ~PHY_TEST_PWR_DOWN; > -- > 2.34.1 >
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index e2f29404c84e..64420ecc24d1 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -43,7 +43,6 @@ #define PARF_PHY_REFCLK 0x4c #define PARF_CONFIG_BITS 0x50 #define PARF_DBI_BASE_ADDR 0x168 -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */ #define PARF_MHI_CLOCK_RESET_CTRL 0x174 #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178 #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8 @@ -797,8 +796,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie) u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); u32 val; - writel(SLV_ADDR_SPACE_SZ, - pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3); + writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE); val = readl(pcie->parf + PARF_PHY_CTRL); val &= ~PHY_TEST_PWR_DOWN;
PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for qcom_pcie_post_init_2_3_3. PCIe slave address space size register offset is 0x358, but was wrongly changed to 0x16c as a part of commit 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions"). Fixing it, by using the right macro and remove the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3. Without this access to the registers of slave addr space like iATU etc are broken leading to PCIe enumeration failure on IPQ8074. Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions") Cc: <Stable@vger.kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> --- [V6] Fixed subject and commit text as per Bjorn Helgaas drivers/pci/controller/dwc/pcie-qcom.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)