| Message ID | 20230920211934.14920-1-ville.syrjala@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/2] drm/edid: Fixup h/vsync_end instead of h/vtotal | expand |
On Thu, 21 Sep 2023, Ville Syrjala <ville.syrjala@linux.intel.com> wrote: > From: Ville Syrjälä <ville.syrjala@linux.intel.com> > > There are some weird EDIDs floating around that have the sync > pulse extending beyond the end of the blanking period. > > On the currently problemtic machine (HP Omni 120) EDID reports > the following mode: > "1600x900": 60 108000 1600 1780 1860 1800 900 910 913 1000 0x40 0x5 > which is then "corrected" to have htotal=1861 by the current drm_edid.c > code. > > The fixup code was originally added in commit 7064fef56369 ("drm: work > around EDIDs with bad htotal/vtotal values"). Googling around we end up in > https://bugs.launchpad.net/ubuntu/hardy/+source/xserver-xorg-video-intel/+bug/297245 > where we find an EDID for a Dell Studio 15, which reports: > (II) VESA(0): clock: 65.0 MHz Image Size: 331 x 207 mm > (II) VESA(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1337 h_border: 0 > (II) VESA(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 810 v_border: 0 > > Note that if we use the hblank size (as opposed of the hsync_end) > from the DTD to determine htotal we get exactly 60Hz refresh rate in > both cases, whereas using hsync_end to determine htotal we get a > slightly lower refresh rates. This makes me believe the using the > hblank size is what was intended even in those cases. > > Also note that in case of the HP Onmi 120 the VBIOS boots with these: > crtc timings: 108000 1600 1780 1860 1800 900 910 913 1000, type: 0x40 flags: 0x5 > ie. it just blindly stuffs the bogus hsync_end and htotal from the DTD > into the transcoder timing registers, and the display works. I believe > the (at least more modern) hardware will automagically terminate the hsync > pulse when the timing generator reaches htotal, which again points that we > should use the hblank size to determine htotal. Unfortunatley the old bug > reports for the Dell machines are extremely lacking in useful details so > we have no idea what kind of timings the VBIOS programmed into the > hardware :( > > Let's just flip this quirk around and reduce the length of the sync > pulse instead of extending the blanking period. This at least seems > to be the correct thing to do on more modern hardware. And if any > issues crop up on older hardware we need to debug them properly. > > v2: Add debug message breadcrumbs (Jani) > > Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 And v2 too. > Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8895 > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > --- > drivers/gpu/drm/drm_edid.c | 18 +++++++++++++----- > 1 file changed, 13 insertions(+), 5 deletions(-) > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c > index 39dd3f694544..ec1cb4890acb 100644 > --- a/drivers/gpu/drm/drm_edid.c > +++ b/drivers/gpu/drm/drm_edid.c > @@ -3497,11 +3497,19 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connecto > mode->vsync_end = mode->vsync_start + vsync_pulse_width; > mode->vtotal = mode->vdisplay + vblank; > > - /* Some EDIDs have bogus h/vtotal values */ > - if (mode->hsync_end > mode->htotal) > - mode->htotal = mode->hsync_end + 1; > - if (mode->vsync_end > mode->vtotal) > - mode->vtotal = mode->vsync_end + 1; > + /* Some EDIDs have bogus h/vsync_end values */ > + if (mode->hsync_end > mode->htotal) { > + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] reducing hsync_end %d->%d\n", > + connector->base.id, connector->name, > + mode->hsync_end, mode->htotal); > + mode->hsync_end = mode->htotal; > + } > + if (mode->vsync_end > mode->vtotal) { > + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] reducing vsync_end %d->%d\n", > + connector->base.id, connector->name, > + mode->vsync_end, mode->vtotal); > + mode->vsync_end = mode->vtotal; > + } > > drm_mode_do_interlace_quirk(mode, pt);
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 39dd3f694544..ec1cb4890acb 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -3497,11 +3497,19 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connecto mode->vsync_end = mode->vsync_start + vsync_pulse_width; mode->vtotal = mode->vdisplay + vblank; - /* Some EDIDs have bogus h/vtotal values */ - if (mode->hsync_end > mode->htotal) - mode->htotal = mode->hsync_end + 1; - if (mode->vsync_end > mode->vtotal) - mode->vtotal = mode->vsync_end + 1; + /* Some EDIDs have bogus h/vsync_end values */ + if (mode->hsync_end > mode->htotal) { + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] reducing hsync_end %d->%d\n", + connector->base.id, connector->name, + mode->hsync_end, mode->htotal); + mode->hsync_end = mode->htotal; + } + if (mode->vsync_end > mode->vtotal) { + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] reducing vsync_end %d->%d\n", + connector->base.id, connector->name, + mode->vsync_end, mode->vtotal); + mode->vsync_end = mode->vtotal; + } drm_mode_do_interlace_quirk(mode, pt);