| Message ID | 1695383434-24705-3-git-send-email-quic_rohiagar@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add devicetree support of Interconnects and USB for SDX75 | expand |
On 22/09/2023 14:50, Rohit Agarwal wrote: > Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and > HS PHY on SDX75. Please fix the subject to mention the platform. Other than that, LGTM. > > Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sdx75.dtsi | 116 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 116 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi > index dd3a525..c44cdd1 100644 > --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi > @@ -473,6 +473,47 @@ > }; > }; > > + usb_hsphy: phy@ff4000 { > + compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy"; > + reg = <0x0 0x00ff4000 0x0 0x154>; > + #phy-cells = <0>; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>; > + clock-names = "ref"; > + > + resets = <&gcc GCC_QUSB2PHY_BCR>; > + > + status = "disabled"; > + }; > + > + usb_qmpphy: phy@ff6000 { > + compatible = "qcom,sdx75-qmp-usb3-uni-phy"; > + reg = <0x0 0x00ff6000 0x0 0x2000>; > + > + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, > + <&gcc GCC_USB2_CLKREF_EN>, > + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, > + <&gcc GCC_USB3_PHY_PIPE_CLK>; > + clock-names = "aux", > + "ref", > + "cfg_ahb", > + "pipe"; > + > + power-domains = <&gcc GCC_USB3_PHY_GDSC>; > + > + resets = <&gcc GCC_USB3_PHY_BCR>, > + <&gcc GCC_USB3PHY_PHY_BCR>; > + reset-names = "phy", > + "phy_phy"; > + > + #clock-cells = <0>; > + clock-output-names = "usb3_uni_phy_pipe_clk_src"; > + > + #phy-cells = <0>; > + > + status = "disabled"; > + }; > + > system_noc: interconnect@1640000 { > compatible = "qcom,sdx75-system-noc"; > reg = <0x0 0x01640000 0x0 0x4b400>; > @@ -493,6 +534,81 @@ > #hwlock-cells = <1>; > }; > > + usb: usb@a6f8800 { > + compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; > + reg = <0x0 0x0a6f8800 0x0 0x400>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, > + <&gcc GCC_USB30_MASTER_CLK>, > + <&gcc GCC_USB30_MSTR_AXI_CLK>, > + <&gcc GCC_USB30_SLEEP_CLK>, > + <&gcc GCC_USB30_MOCK_UTMI_CLK>; > + clock-names = "cfg_noc", > + "core", > + "iface", > + "sleep", > + "mock_utmi"; > + > + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, > + <&gcc GCC_USB30_MASTER_CLK>; > + assigned-clock-rates = <19200000>, <200000000>; > + > + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, > + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, > + <&pdc 9 IRQ_TYPE_EDGE_RISING>, > + <&pdc 10 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "hs_phy_irq", > + "ss_phy_irq", > + "dm_hs_phy_irq", > + "dp_hs_phy_irq"; > + > + power-domains = <&gcc GCC_USB30_GDSC>; > + > + resets = <&gcc GCC_USB30_BCR>; > + > + interconnects = <&system_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, > + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_USB3 0>; > + interconnect-names = "usb-ddr", > + "apps-usb"; > + > + status = "disabled"; > + > + usb_dwc3: usb@a600000 { > + compatible = "snps,dwc3"; > + reg = <0x0 0x0a600000 0x0 0xcd00>; > + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; > + iommus = <&apps_smmu 0x80 0x0>; > + snps,dis_u2_susphy_quirk; > + snps,dis_enblslpm_quirk; > + phys = <&usb_hsphy>, > + <&usb_qmpphy>; > + phy-names = "usb2-phy", > + "usb3-phy"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + usb_1_dwc3_hs: endpoint { > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + usb_1_dwc3_ss: endpoint { > + }; > + }; > + }; > + }; > + }; > + > pdc: interrupt-controller@b220000 { > compatible = "qcom,sdx75-pdc", "qcom,pdc"; > reg = <0x0 0xb220000 0x0 0x30000>,
On 9/24/2023 12:49 AM, Dmitry Baryshkov wrote: > On 22/09/2023 14:50, Rohit Agarwal wrote: >> Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and >> HS PHY on SDX75. > > Please fix the subject to mention the platform. > > Other than that, LGTM. Oh missed it. Thanks, Rohit. > >> >> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sdx75.dtsi | 116 >> ++++++++++++++++++++++++++++++++++++ >> 1 file changed, 116 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi >> b/arch/arm64/boot/dts/qcom/sdx75.dtsi >> index dd3a525..c44cdd1 100644 >> --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi >> @@ -473,6 +473,47 @@ >> }; >> }; >> + usb_hsphy: phy@ff4000 { >> + compatible = "qcom,sdx75-snps-eusb2-phy", >> "qcom,sm8550-snps-eusb2-phy"; >> + reg = <0x0 0x00ff4000 0x0 0x154>; >> + #phy-cells = <0>; >> + >> + clocks = <&rpmhcc RPMH_CXO_CLK>; >> + clock-names = "ref"; >> + >> + resets = <&gcc GCC_QUSB2PHY_BCR>; >> + >> + status = "disabled"; >> + }; >> + >> + usb_qmpphy: phy@ff6000 { >> + compatible = "qcom,sdx75-qmp-usb3-uni-phy"; >> + reg = <0x0 0x00ff6000 0x0 0x2000>; >> + >> + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, >> + <&gcc GCC_USB2_CLKREF_EN>, >> + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, >> + <&gcc GCC_USB3_PHY_PIPE_CLK>; >> + clock-names = "aux", >> + "ref", >> + "cfg_ahb", >> + "pipe"; >> + >> + power-domains = <&gcc GCC_USB3_PHY_GDSC>; >> + >> + resets = <&gcc GCC_USB3_PHY_BCR>, >> + <&gcc GCC_USB3PHY_PHY_BCR>; >> + reset-names = "phy", >> + "phy_phy"; >> + >> + #clock-cells = <0>; >> + clock-output-names = "usb3_uni_phy_pipe_clk_src"; >> + >> + #phy-cells = <0>; >> + >> + status = "disabled"; >> + }; >> + >> system_noc: interconnect@1640000 { >> compatible = "qcom,sdx75-system-noc"; >> reg = <0x0 0x01640000 0x0 0x4b400>; >> @@ -493,6 +534,81 @@ >> #hwlock-cells = <1>; >> }; >> + usb: usb@a6f8800 { >> + compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; >> + reg = <0x0 0x0a6f8800 0x0 0x400>; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, >> + <&gcc GCC_USB30_MASTER_CLK>, >> + <&gcc GCC_USB30_MSTR_AXI_CLK>, >> + <&gcc GCC_USB30_SLEEP_CLK>, >> + <&gcc GCC_USB30_MOCK_UTMI_CLK>; >> + clock-names = "cfg_noc", >> + "core", >> + "iface", >> + "sleep", >> + "mock_utmi"; >> + >> + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, >> + <&gcc GCC_USB30_MASTER_CLK>; >> + assigned-clock-rates = <19200000>, <200000000>; >> + >> + interrupts-extended = <&intc GIC_SPI 131 >> IRQ_TYPE_LEVEL_HIGH>, >> + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, >> + <&pdc 9 IRQ_TYPE_EDGE_RISING>, >> + <&pdc 10 IRQ_TYPE_EDGE_RISING>; >> + interrupt-names = "hs_phy_irq", >> + "ss_phy_irq", >> + "dm_hs_phy_irq", >> + "dp_hs_phy_irq"; >> + >> + power-domains = <&gcc GCC_USB30_GDSC>; >> + >> + resets = <&gcc GCC_USB30_BCR>; >> + >> + interconnects = <&system_noc MASTER_USB3_0 0 &mc_virt >> SLAVE_EBI1 0>, >> + <&gem_noc MASTER_APPSS_PROC 0 &system_noc >> SLAVE_USB3 0>; >> + interconnect-names = "usb-ddr", >> + "apps-usb"; >> + >> + status = "disabled"; >> + >> + usb_dwc3: usb@a600000 { >> + compatible = "snps,dwc3"; >> + reg = <0x0 0x0a600000 0x0 0xcd00>; >> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; >> + iommus = <&apps_smmu 0x80 0x0>; >> + snps,dis_u2_susphy_quirk; >> + snps,dis_enblslpm_quirk; >> + phys = <&usb_hsphy>, >> + <&usb_qmpphy>; >> + phy-names = "usb2-phy", >> + "usb3-phy"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + >> + usb_1_dwc3_hs: endpoint { >> + }; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + >> + usb_1_dwc3_ss: endpoint { >> + }; >> + }; >> + }; >> + }; >> + }; >> + >> pdc: interrupt-controller@b220000 { >> compatible = "qcom,sdx75-pdc", "qcom,pdc"; >> reg = <0x0 0xb220000 0x0 0x30000>, >
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index dd3a525..c44cdd1 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -473,6 +473,47 @@ }; }; + usb_hsphy: phy@ff4000 { + compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x00ff4000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_BCR>; + + status = "disabled"; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx75-qmp-usb3-uni-phy"; + reg = <0x0 0x00ff6000 0x0 0x2000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB2_CLKREF_EN>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + + power-domains = <&gcc GCC_USB3_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + system_noc: interconnect@1640000 { compatible = "qcom,sdx75-system-noc"; reg = <0x0 0x01640000 0x0 0x4b400>; @@ -493,6 +534,81 @@ #hwlock-cells = <1>; }; + usb: usb@a6f8800 { + compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; + reg = <0x0 0x0a6f8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>, + <&pdc 10 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + interconnects = <&system_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", + "apps-usb"; + + status = "disabled"; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0 0x0a600000 0x0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x80 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, + <&usb_qmpphy>; + phy-names = "usb2-phy", + "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sdx75-pdc", "qcom,pdc"; reg = <0x0 0xb220000 0x0 0x30000>,
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and HS PHY on SDX75. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> --- arch/arm64/boot/dts/qcom/sdx75.dtsi | 116 ++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+)