@@ -7661,6 +7661,283 @@ static u8 ath11k_mac_get_num_pwr_levels(struct cfg80211_chan_def *chan_def)
}
}
+static u16 ath11k_mac_get_6ghz_start_frequency(struct cfg80211_chan_def *chan_def)
+{
+ u16 diff_seq;
+
+ /* It is to get the lowest channel number's center frequency of the chan.
+ * For example,
+ * bandwidth=40 MHz, center frequency is 5965, lowest channel is 1
+ * with center frequency 5955, its diff is 5965 - 5955 = 10.
+ * bandwidth=80 MHz, center frequency is 5985, lowest channel is 1
+ * with center frequency 5955, its diff is 5985 - 5955 = 30.
+ * bandwidth=160 MHz, center frequency is 6025, lowest channel is 1
+ * with center frequency 5955, its diff is 6025 - 5955 = 70.
+ */
+ switch (chan_def->width) {
+ case NL80211_CHAN_WIDTH_160:
+ diff_seq = 70;
+ break;
+ case NL80211_CHAN_WIDTH_80:
+ case NL80211_CHAN_WIDTH_80P80:
+ diff_seq = 30;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ diff_seq = 10;
+ break;
+ default:
+ diff_seq = 0;
+ }
+
+ return chan_def->center_freq1 - diff_seq;
+}
+
+static u16 ath11k_mac_get_seg_freq(struct cfg80211_chan_def *chan_def,
+ u16 start_seq, u8 seq)
+{
+ u16 seg_seq;
+
+ /* It is to get the center frequency of the specific bandwidth.
+ * start_seq means the lowest channel number's center frequency.
+ * seq 0/1/2/3 means 20 MHz/40 MHz/80 MHz/160 MHz&80P80.
+ * For example,
+ * lowest channel is 1, its center frequency 5955,
+ * center frequency is 5955 when bandwidth=20 MHz, its diff is 5955 - 5955 = 0.
+ * lowest channel is 1, its center frequency 5955,
+ * center frequency is 5965 when bandwidth=40 MHz, its diff is 5965 - 5955 = 10.
+ * lowest channel is 1, its center frequency 5955,
+ * center frequency is 5985 when bandwidth=80 MHz, its diff is 5985 - 5955 = 30.
+ * lowest channel is 1, its center frequency 5955,
+ * center frequency is 6025 when bandwidth=160 MHz, its diff is 6025 - 5955 = 70.
+ */
+ if (chan_def->width == NL80211_CHAN_WIDTH_80P80 && seq == 3)
+ return chan_def->center_freq2;
+
+ seg_seq = 10 * (BIT(seq) - 1);
+ return seg_seq + start_seq;
+}
+
+static void ath11k_mac_get_psd_channel(struct ath11k *ar,
+ u16 step_freq,
+ u16 *start_freq,
+ u16 *center_freq,
+ u8 i,
+ struct ieee80211_channel **temp_chan,
+ s8 *tx_power)
+{
+ /* It is to get the the center frequency for each 20 MHz.
+ * For example, if the chan is 160 MHz and center frequency is 6025,
+ * then it include 8 channels, they are 1/5/9/13/17/21/25/29,
+ * channel number 1's center frequency is 5955, it is parameter start_freq.
+ * parameter i is the step of the 8 channels. i is 0~7 for the 8 channels.
+ * the channel 1/5/9/13/17/21/25/29 maps i=0/1/2/3/4/5/6/7,
+ * and maps its center frequency is 5955/5975/5995/6015/6035/6055/6075/6095,
+ * the gap is 20 for each channel, parameter step_freq means the gap.
+ * after get the center frequency of each channel, it is easy to find the
+ * struct ieee80211_channel of it and get the max_reg_power.
+ */
+ *center_freq = *start_freq + i * step_freq;
+ *temp_chan = ieee80211_get_channel(ar->hw->wiphy, *center_freq);
+ *tx_power = (*temp_chan)->max_reg_power;
+}
+
+static void ath11k_mac_get_eirp_power(struct ath11k *ar,
+ u16 *start_freq,
+ u16 *center_freq,
+ u8 i,
+ struct ieee80211_channel **temp_chan,
+ struct cfg80211_chan_def *def,
+ s8 *tx_power)
+{
+ /* It is to get the the center frequency for 20 MHz/40 MHz/80 MHz/
+ * 160 MHz&80P80 bandwidth, and then plus 10 to the center frequency,
+ * it is the center frequency of a channel number.
+ * For example, when configured channel number is 1.
+ * center frequency is 5965 when bandwidth=40 MHz, after plus 10, it is 5975,
+ * then it is channel number 5.
+ * center frequency is 5985 when bandwidth=80 MHz, after plus 10, it is 5995,
+ * then it is channel number 9.
+ * center frequency is 6025 when bandwidth=160 MHz, after plus 10, it is 6035,
+ * then it is channel number 17.
+ * after get the center frequency of each channel, it is easy to find the
+ * struct ieee80211_channel of it and get the max_reg_power.
+ */
+ *center_freq = ath11k_mac_get_seg_freq(def, *start_freq, i);
+
+ /* For the 20 MHz, its center frequency is same with same channel */
+ if (i != 0)
+ *center_freq += 10;
+
+ *temp_chan = ieee80211_get_channel(ar->hw->wiphy, *center_freq);
+ *tx_power = (*temp_chan)->max_reg_power;
+}
+
+void ath11k_mac_fill_reg_tpc_info(struct ath11k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_chanctx_conf *ctx)
+{
+ struct ath11k_base *ab = ar->ab;
+ struct ath11k_vif *arvif = (void *)vif->drv_priv;
+ struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+ struct ath11k_reg_tpc_power_info *reg_tpc_info = &arvif->reg_tpc_info;
+ struct ieee80211_channel *chan, *temp_chan;
+ u8 pwr_lvl_idx, num_pwr_levels, pwr_reduction;
+ bool is_psd_power = false, is_tpe_present = false;
+ s8 max_tx_power[IEEE80211_MAX_NUM_PWR_LEVEL],
+ psd_power, tx_power, eirp_power;
+ u16 oper_freq, start_freq, center_freq;
+
+ chan = ctx->def.chan;
+ oper_freq = ctx->def.chan->center_freq;
+ start_freq = ath11k_mac_get_6ghz_start_frequency(&ctx->def);
+ pwr_reduction = bss_conf->pwr_reduction;
+
+ if (arvif->reg_tpc_info.num_pwr_levels) {
+ is_tpe_present = true;
+ num_pwr_levels = arvif->reg_tpc_info.num_pwr_levels;
+ } else {
+ num_pwr_levels = ath11k_mac_get_num_pwr_levels(&ctx->def);
+ }
+
+ for (pwr_lvl_idx = 0; pwr_lvl_idx < num_pwr_levels; pwr_lvl_idx++) {
+ /* STA received TPE IE*/
+ if (is_tpe_present) {
+ /* local power is PSD power*/
+ if (chan->flags & IEEE80211_CHAN_PSD) {
+ /* Connecting AP is psd power */
+ if (reg_tpc_info->is_psd_power) {
+ is_psd_power = true;
+ ath11k_mac_get_psd_channel(ar, 20,
+ &start_freq,
+ ¢er_freq,
+ pwr_lvl_idx,
+ &temp_chan,
+ &tx_power);
+ psd_power = temp_chan->psd;
+ eirp_power = tx_power;
+ max_tx_power[pwr_lvl_idx] =
+ min_t(s8,
+ psd_power,
+ reg_tpc_info->tpe[pwr_lvl_idx]);
+ /* Connecting AP is not psd power */
+ } else {
+ ath11k_mac_get_eirp_power(ar,
+ &start_freq,
+ ¢er_freq,
+ pwr_lvl_idx,
+ &temp_chan,
+ &ctx->def,
+ &tx_power);
+ psd_power = temp_chan->psd;
+ /* convert psd power to EIRP power based
+ * on channel width
+ */
+ tx_power =
+ min_t(s8, tx_power,
+ psd_power + 13 + pwr_lvl_idx * 3);
+ max_tx_power[pwr_lvl_idx] =
+ min_t(s8,
+ tx_power,
+ reg_tpc_info->tpe[pwr_lvl_idx]);
+ }
+ /* local power is not PSD power */
+ } else {
+ /* Connecting AP is psd power */
+ if (reg_tpc_info->is_psd_power) {
+ is_psd_power = true;
+ ath11k_mac_get_psd_channel(ar, 20,
+ &start_freq,
+ ¢er_freq,
+ pwr_lvl_idx,
+ &temp_chan,
+ &tx_power);
+ eirp_power = tx_power;
+ max_tx_power[pwr_lvl_idx] =
+ reg_tpc_info->tpe[pwr_lvl_idx];
+ /* Connecting AP is not psd power */
+ } else {
+ ath11k_mac_get_eirp_power(ar,
+ &start_freq,
+ ¢er_freq,
+ pwr_lvl_idx,
+ &temp_chan,
+ &ctx->def,
+ &tx_power);
+ max_tx_power[pwr_lvl_idx] =
+ min_t(s8,
+ tx_power,
+ reg_tpc_info->tpe[pwr_lvl_idx]);
+ }
+ }
+ /* STA not received TPE IE */
+ } else {
+ /* local power is PSD power*/
+ if (chan->flags & IEEE80211_CHAN_PSD) {
+ is_psd_power = true;
+ ath11k_mac_get_psd_channel(ar, 20,
+ &start_freq,
+ ¢er_freq,
+ pwr_lvl_idx,
+ &temp_chan,
+ &tx_power);
+ psd_power = temp_chan->psd;
+ eirp_power = tx_power;
+ max_tx_power[pwr_lvl_idx] = psd_power;
+ } else {
+ ath11k_mac_get_eirp_power(ar,
+ &start_freq,
+ ¢er_freq,
+ pwr_lvl_idx,
+ &temp_chan,
+ &ctx->def,
+ &tx_power);
+ max_tx_power[pwr_lvl_idx] = tx_power;
+ }
+ }
+
+ if (is_psd_power) {
+ /* If AP local power constraint is present */
+ if (pwr_reduction)
+ eirp_power = eirp_power - pwr_reduction;
+
+ /* If firmware updated max tx power is non zero, then take
+ * the min of firmware updated ap tx power
+ * and max power derived from above mentioned parameters.
+ */
+ ath11k_dbg(ab, ATH11K_DBG_MAC,
+ "eirp power : %d firmware report power : %d\n",
+ eirp_power, ar->max_allowed_tx_power);
+ if (ar->max_allowed_tx_power)
+ eirp_power = min_t(s8,
+ eirp_power,
+ ar->max_allowed_tx_power);
+ } else {
+ /* If AP local power constraint is present */
+ if (pwr_reduction)
+ max_tx_power[pwr_lvl_idx] =
+ max_tx_power[pwr_lvl_idx] - pwr_reduction;
+ /* If firmware updated max tx power is non zero, then take
+ * the min of firmware updated ap tx power
+ * and max power derived from above mentioned parameters.
+ */
+ if (ar->max_allowed_tx_power)
+ max_tx_power[pwr_lvl_idx] =
+ min_t(s8,
+ max_tx_power[pwr_lvl_idx],
+ ar->max_allowed_tx_power);
+ }
+ reg_tpc_info->chan_power_info[pwr_lvl_idx].chan_cfreq = center_freq;
+ reg_tpc_info->chan_power_info[pwr_lvl_idx].tx_power =
+ max_tx_power[pwr_lvl_idx];
+ }
+
+ reg_tpc_info->num_pwr_levels = num_pwr_levels;
+ reg_tpc_info->is_psd_power = is_psd_power;
+ reg_tpc_info->eirp_power = eirp_power;
+ reg_tpc_info->ap_power_type =
+ ath11k_reg_ap_pwr_convert(vif->bss_conf.power_type);
+}
+
static void ath11k_mac_parse_tx_pwr_env(struct ath11k *ar,
struct ieee80211_vif *vif,
struct ieee80211_chanctx_conf *ctx)
@@ -174,4 +174,7 @@ int ath11k_mac_wait_tx_complete(struct ath11k *ar);
int ath11k_mac_vif_set_keepalive(struct ath11k_vif *arvif,
enum wmi_sta_keepalive_method method,
u32 interval);
+void ath11k_mac_fill_reg_tpc_info(struct ath11k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_chanctx_conf *ctx);
#endif
Prepare the parameters which is needed for WMI command WMI_VDEV_SET_TPC_POWER_CMDID. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> --- drivers/net/wireless/ath/ath11k/mac.c | 277 ++++++++++++++++++++++++++ drivers/net/wireless/ath/ath11k/mac.h | 3 + 2 files changed, 280 insertions(+)