| Message ID | 20230927164222.3505-2-jszhang@kernel.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | usb: dwc3: add driver for T-HEAD TH1520 SoC | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/cover_letter | success | Series has a cover letter |
| conchuod/tree_selection | success | Guessed tree name to be for-next at HEAD 0bb80ecc33a8 |
| conchuod/fixes_present | success | Fixes tag not required for -next series |
| conchuod/maintainers_pattern | success | MAINTAINERS pattern errors before the patch: 5 and now 5 |
| conchuod/verify_signedoff | success | Signed-off-by tag matches author and committer |
| conchuod/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| conchuod/build_rv64_clang_allmodconfig | success | Errors and warnings before: 12 this patch: 12 |
| conchuod/module_param | success | Was 0 now: 0 |
| conchuod/build_rv64_gcc_allmodconfig | success | Errors and warnings before: 13 this patch: 13 |
| conchuod/build_rv32_defconfig | success | Build OK |
| conchuod/dtb_warn_rv64 | success | Errors and warnings before: 29 this patch: 29 |
| conchuod/header_inline | success | No static functions without inline keyword in header files |
| conchuod/checkpatch | warning | WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? |
| conchuod/build_rv64_nommu_k210_defconfig | success | Build OK |
| conchuod/verify_fixes | success | No Fixes tag |
| conchuod/build_rv64_nommu_virt_defconfig | success | Build OK |
On 2023-09-27 11:42 AM, Jisheng Zhang wrote: > T-HEAD TH1520 platform's USB has a wrapper module around > the DesignWare USB3 DRD controller. Add binding information doc for > it. > > Signed-off-by: Jisheng Zhang <jszhang@kernel.org> > --- > .../bindings/usb/thead,th1520-usb.yaml | 73 +++++++++++++++++++ > 1 file changed, 73 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml > > diff --git a/Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml b/Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml > new file mode 100644 > index 000000000000..afb618eb5013 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml > @@ -0,0 +1,73 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/thead,th1520-usb.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: T-HEAD TH1520 DWC3 USB Controller Glue > + > +maintainers: > + - Jisheng Zhang <jszhang@kernel.org> > + > +properties: > + compatible: > + const: thead,th1520-usb > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 4 > + > + clock-names: > + items: > + - const: ref > + - const: bus_early > + - const: phy > + - const: suspend Except for "phy", these clocks are already documented in snps,dwc3.yaml. Are they necessary for the glue/PHY, or do they belong only in the controller node? They are not used by the driver in patch 2. Also, the PHY clock probably belongs with the PHY node. > + > + ranges: true > + > + '#address-cells': > + enum: [ 1, 2 ] > + > + '#size-cells': > + enum: [ 1, 2 ] > + > +# Required child node: > + > +patternProperties: > + "^usb@[0-9a-f]+$": > + $ref: snps,dwc3.yaml# > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - ranges > + > +additionalProperties: false The driver in patch 2 uses the thead,misc-sysreg and vbus-supply properties, neither of which is documented here. Also, depending on the other bindings, the VBUS supply should be referenced from the USB PHY or connector node, not here. Regards, Samuel > +examples: > + - | > + > + usb { > + compatible = "thead,th1520-usb"; > + reg = <0xec03f000 0x1000>; > + clocks = <&clk 1>, > + <&clk 2>, > + <&clk 3>, > + <&clk 4>; > + clock-names = "ref", "bus_early", "phy", "suspend"; > + ranges; > + #address-cells = <1>; > + #size-cells = <1>; > + > + usb@e7040000 { > + compatible = "snps,dwc3"; > + reg = <0xe7040000 0x10000>; > + interrupts = <68>; > + dr_mode = "host"; > + }; > + };
On 27/09/2023 18:42, Jisheng Zhang wrote: > T-HEAD TH1520 platform's USB has a wrapper module around > the DesignWare USB3 DRD controller. Add binding information doc for > it. > > Signed-off-by: Jisheng Zhang <jszhang@kernel.org> > --- ... > + > + '#address-cells': > + enum: [ 1, 2 ] > + > + '#size-cells': > + enum: [ 1, 2 ] > + > +# Required child node: > + > +patternProperties: > + "^usb@[0-9a-f]+$": > + $ref: snps,dwc3.yaml# > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - ranges > + > +additionalProperties: false > + > +examples: > + - | > + Drop stray blank line > + usb { > + compatible = "thead,th1520-usb"; Use 4 spaces for example indentation. > + reg = <0xec03f000 0x1000>; > + clocks = <&clk 1>, > + <&clk 2>, > + <&clk 3>, > + <&clk 4>; > + clock-names = "ref", "bus_early", "phy", "suspend"; > + ranges; Are you sure you do not have W=1 warnings in DTS? Best regards, Krzysztof
On Thu, 28 Sep 2023 00:42:21 +0800, Jisheng Zhang wrote: > T-HEAD TH1520 platform's USB has a wrapper module around > the DesignWare USB3 DRD controller. Add binding information doc for > it. > > Signed-off-by: Jisheng Zhang <jszhang@kernel.org> > --- > .../bindings/usb/thead,th1520-usb.yaml | 73 +++++++++++++++++++ > 1 file changed, 73 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/usb/thead,th1520-usb.example.dts:25.13-43.11: Warning (unit_address_vs_reg): /example-0/usb: node has a reg or ranges property, but no unit name doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230927164222.3505-2-jszhang@kernel.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 28/09/2023 07:21, Krzysztof Kozlowski wrote: > Drop stray blank line > >> + usb { >> + compatible = "thead,th1520-usb"; > > Use 4 spaces for example indentation. > >> + reg = <0xec03f000 0x1000>; >> + clocks = <&clk 1>, >> + <&clk 2>, >> + <&clk 3>, >> + <&clk 4>; >> + clock-names = "ref", "bus_early", "phy", "suspend"; >> + ranges; > > Are you sure you do not have W=1 warnings in DTS? Ah, as we can see from bot's report, you have warnings. Please test your DTS with dtbs_check W=1 and fix all (*ALL*) warnings. This looks like missing proper addresses in the ranges. Best regards, Krzysztof
On Wed, Sep 27, 2023 at 03:00:59PM -0500, Samuel Holland wrote: > On 2023-09-27 11:42 AM, Jisheng Zhang wrote: > > T-HEAD TH1520 platform's USB has a wrapper module around > > the DesignWare USB3 DRD controller. Add binding information doc for > > it. > > > > Signed-off-by: Jisheng Zhang <jszhang@kernel.org> > > --- > > .../bindings/usb/thead,th1520-usb.yaml | 73 +++++++++++++++++++ > > 1 file changed, 73 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml > > > > diff --git a/Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml b/Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml > > new file mode 100644 > > index 000000000000..afb618eb5013 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml > > @@ -0,0 +1,73 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/usb/thead,th1520-usb.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: T-HEAD TH1520 DWC3 USB Controller Glue > > + > > +maintainers: > > + - Jisheng Zhang <jszhang@kernel.org> > > + > > +properties: > > + compatible: > > + const: thead,th1520-usb > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 4 > > + > > + clock-names: > > + items: > > + - const: ref > > + - const: bus_early > > + - const: phy > > + - const: suspend > > Except for "phy", these clocks are already documented in snps,dwc3.yaml. Are > they necessary for the glue/PHY, or do they belong only in the controller node? Hi Samuel, Enabling ref, bus_early clks are necessary for the glue layer, because we program the glue registers before calling of_platform_populate() > They are not used by the driver in patch 2. Also, the PHY clock probably belongs > with the PHY node. Except enabling the phy clk, we don't need to touch the phy, so I'm not sure how to handle this if we have a dedicated phy driver thus a phy node. or use the usb-nop-xceiv? Thanks > > > + > > + ranges: true > > + > > + '#address-cells': > > + enum: [ 1, 2 ] > > + > > + '#size-cells': > > + enum: [ 1, 2 ] > > + > > +# Required child node: > > + > > +patternProperties: > > + "^usb@[0-9a-f]+$": > > + $ref: snps,dwc3.yaml# > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - ranges > > + > > +additionalProperties: false > > The driver in patch 2 uses the thead,misc-sysreg and vbus-supply properties, > neither of which is documented here. Also, depending on the other bindings, the > VBUS supply should be referenced from the USB PHY or connector node, not here. > > Regards, > Samuel > > > +examples: > > + - | > > + > > + usb { > > + compatible = "thead,th1520-usb"; > > + reg = <0xec03f000 0x1000>; > > + clocks = <&clk 1>, > > + <&clk 2>, > > + <&clk 3>, > > + <&clk 4>; > > + clock-names = "ref", "bus_early", "phy", "suspend"; > > + ranges; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + > > + usb@e7040000 { > > + compatible = "snps,dwc3"; > > + reg = <0xe7040000 0x10000>; > > + interrupts = <68>; > > + dr_mode = "host"; > > + }; > > + }; >
diff --git a/Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml b/Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml new file mode 100644 index 000000000000..afb618eb5013 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/thead,th1520-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: T-HEAD TH1520 DWC3 USB Controller Glue + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +properties: + compatible: + const: thead,th1520-usb + + reg: + maxItems: 1 + + clocks: + maxItems: 4 + + clock-names: + items: + - const: ref + - const: bus_early + - const: phy + - const: suspend + + ranges: true + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + +# Required child node: + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - ranges + +additionalProperties: false + +examples: + - | + + usb { + compatible = "thead,th1520-usb"; + reg = <0xec03f000 0x1000>; + clocks = <&clk 1>, + <&clk 2>, + <&clk 3>, + <&clk 4>; + clock-names = "ref", "bus_early", "phy", "suspend"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + usb@e7040000 { + compatible = "snps,dwc3"; + reg = <0xe7040000 0x10000>; + interrupts = <68>; + dr_mode = "host"; + }; + };
T-HEAD TH1520 platform's USB has a wrapper module around the DesignWare USB3 DRD controller. Add binding information doc for it. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> --- .../bindings/usb/thead,th1520-usb.yaml | 73 +++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/thead,th1520-usb.yaml