@@ -67,7 +67,7 @@ What: /sys/bus/i3c/devices/i3c-<bus-id>/pid
KernelVersion: 5.0
Contact: linux-i3c@vger.kernel.org
Description:
- PID stands for Provisional ID and is used to uniquely identify
+ PID stands for Provisioned ID and is used to uniquely identify
a device on a bus. This PID contains information about the
vendor, the part and an instance ID so that several devices of
the same type can be connected on the same bus.
@@ -123,7 +123,7 @@ What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid
KernelVersion: 5.0
Contact: linux-i3c@vger.kernel.org
Description:
- PID stands for Provisional ID and is used to uniquely identify
+ PID stands for Provisioned ID and is used to uniquely identify
a device on a bus. This PID contains information about the
vendor, the part and an instance ID so that several devices of
the same type can be connected on the same bus.
@@ -119,12 +119,12 @@ patternProperties:
minimum: 0
maximum: 0x7f
- description: |
- First half of the Provisional ID (following the PID
+ First half of the Provisioned ID (following the PID
definition provided by the I3C specification).
Contains the manufacturer ID left-shifted by 1.
- description: |
- Second half of the Provisional ID (following the PID
+ Second half of the Provisioned ID (following the PID
definition provided by the I3C specification).
Contains the ORing of the part ID left-shifted by 16,
@@ -71,8 +71,8 @@ During DAA, each I3C device reports 3 important things:
related capabilities
* DCR: Device Characteristic Register. This 8-bit register describes the
functionalities provided by the device
-* Provisional ID: A 48-bit unique identifier. On a given bus there should be no
- Provisional ID collision, otherwise the discovery mechanism may fail.
+* Provisioned ID: A 48-bit unique identifier. On a given bus there should be no
+ Provisioned ID collision, otherwise the discovery mechanism may fail.
I3C slave events
================
@@ -765,7 +765,7 @@ static int svc_i3c_master_do_daa_locked(struct svc_i3c_master *master,
u8 data[6];
/*
- * We only care about the 48-bit provisional ID yet to
+ * We only care about the 48-bit provisioned ID yet to
* be sure a device does not nack an address twice.
* Otherwise, we would just need to flush the RX FIFO.
*/
@@ -96,7 +96,7 @@ enum i3c_dcr {
/**
* struct i3c_device_info - I3C device information
- * @pid: Provisional ID
+ * @pid: Provisioned ID
* @bcr: Bus Characteristic Register
* @dcr: Device Characteristic Register
* @static_addr: static/I2C address
@@ -166,7 +166,7 @@ struct i3c_device_ibi_info {
* assigned a dynamic address by the master. Will be used during
* bus initialization to assign it a specific dynamic address
* before starting DAA (Dynamic Address Assignment)
- * @pid: I3C Provisional ID exposed by the device. This is a unique identifier
+ * @pid: I3C Provisioned ID exposed by the device. This is a unique identifier
* that may be used to attach boardinfo to i3c_dev_desc when the device
* does not have a static address
* @of_node: optional DT node in case the device has been described in the DT
The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes) provisioned at device manufacturing. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> --- Documentation/ABI/testing/sysfs-bus-i3c | 4 ++-- Documentation/devicetree/bindings/i3c/i3c.yaml | 4 ++-- Documentation/driver-api/i3c/protocol.rst | 4 ++-- drivers/i3c/master/svc-i3c-master.c | 2 +- include/linux/i3c/device.h | 2 +- include/linux/i3c/master.h | 2 +- 6 files changed, 9 insertions(+), 9 deletions(-)