| Message ID | 20231004150856.2540-1-jszhang@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | soc: renesas: make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE | expand |
On 04/10/2023 4:08 pm, Jisheng Zhang wrote: > Drew found "CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail" > the log looks like: > [ 3.741083] mmc0: Unable to allocate ADMA buffers - falling back to standard DMA > > The logic is: generic riscv defconfig selects ARCH_RENESAS then > ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all > non-dma-coherent riscv platforms have a dma global pool, this assumption > seems not correct. And I believe DMA_GLOBAL_POOL should not be > selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific > conditions can select it globaly, for example NOMMU ARM and so on, > because it's designed for special cases such as "nommu cases where > non-cacheable memory lives in a fixed place in the physical address > map" as pointed out by Robin. > > Fix the issue by making ARCH_R9A07G043 (riscv version) depend on > NONPORTABLE, thus generic defconfig won't select ARCH_R9A07G043 by > default. And even for random config case, there will be less debug > effort once we see NONPORTABLE is enabled. FWIW, Reviewed-by: Robin Murphy <robin.murphy@arm.com> > Reported-by: Drew Fustini <dfustini@baylibre.com> > Closes: https://lore.kernel.org/linux-riscv/ZRuamJuShOnvP1pr@x1/ > Fixes: 484861e09f3e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC") > Signed-off-by: Jisheng Zhang <jszhang@kernel.org> > --- > drivers/soc/renesas/Kconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig > index 5a75ab64d1ed..12040ce116a5 100644 > --- a/drivers/soc/renesas/Kconfig > +++ b/drivers/soc/renesas/Kconfig > @@ -333,6 +333,7 @@ if RISCV > > config ARCH_R9A07G043 > bool "RISC-V Platform support for RZ/Five" > + depends on NONPORTABLE > select ARCH_RZG2L > select AX45MP_L2_CACHE if RISCV_DMA_NONCOHERENT > select DMA_GLOBAL_POOL
On Wed, Oct 04, 2023 at 11:08:56PM +0800, Jisheng Zhang wrote: > Drew found "CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail" > the log looks like: > [ 3.741083] mmc0: Unable to allocate ADMA buffers - falling back to standard DMA > > The logic is: generic riscv defconfig selects ARCH_RENESAS then > ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all > non-dma-coherent riscv platforms have a dma global pool, this assumption > seems not correct. And I believe DMA_GLOBAL_POOL should not be > selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific > conditions can select it globaly, for example NOMMU ARM and so on, > because it's designed for special cases such as "nommu cases where > non-cacheable memory lives in a fixed place in the physical address > map" as pointed out by Robin. > > Fix the issue by making ARCH_R9A07G043 (riscv version) depend on > NONPORTABLE, thus generic defconfig won't select ARCH_R9A07G043 by > default. And even for random config case, there will be less debug > effort once we see NONPORTABLE is enabled. > > Reported-by: Drew Fustini <dfustini@baylibre.com> > Closes: https://lore.kernel.org/linux-riscv/ZRuamJuShOnvP1pr@x1/ > Fixes: 484861e09f3e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC") > Signed-off-by: Jisheng Zhang <jszhang@kernel.org> > --- > drivers/soc/renesas/Kconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig > index 5a75ab64d1ed..12040ce116a5 100644 > --- a/drivers/soc/renesas/Kconfig > +++ b/drivers/soc/renesas/Kconfig > @@ -333,6 +333,7 @@ if RISCV > > config ARCH_R9A07G043 > bool "RISC-V Platform support for RZ/Five" > + depends on NONPORTABLE > select ARCH_RZG2L > select AX45MP_L2_CACHE if RISCV_DMA_NONCOHERENT > select DMA_GLOBAL_POOL > -- > 2.40.1 > Tested-by: Drew Fustini <dfustini@baylibre.com> With this patch, I can use the defconfig and sdhci-of-dwcmshc driver is able to use ADMA mode without needing to add shared-dma-pool to dts: # zcat /proc/config.gz |grep DMA_GLOBAL_POOL # dtc -I fs /sys/firmware/devicetree/base/ 2>/dev/null |grep pool # dmesg |grep ADMA [ 3.910269] mmc0: SDHCI controller on ffe7080000.mmc [ffe7080000.mmc] using ADMA 64-bit Thanks, Drew
On Wed, Oct 4, 2023 at 4:21 PM Jisheng Zhang <jszhang@kernel.org> wrote: > > Drew found "CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail" > the log looks like: > [ 3.741083] mmc0: Unable to allocate ADMA buffers - falling back to standard DMA > > The logic is: generic riscv defconfig selects ARCH_RENESAS then > ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all > non-dma-coherent riscv platforms have a dma global pool, this assumption > seems not correct. And I believe DMA_GLOBAL_POOL should not be > selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific > conditions can select it globaly, for example NOMMU ARM and so on, > because it's designed for special cases such as "nommu cases where > non-cacheable memory lives in a fixed place in the physical address > map" as pointed out by Robin. > > Fix the issue by making ARCH_R9A07G043 (riscv version) depend on > NONPORTABLE, thus generic defconfig won't select ARCH_R9A07G043 by > default. And even for random config case, there will be less debug > effort once we see NONPORTABLE is enabled. > > Reported-by: Drew Fustini <dfustini@baylibre.com> > Closes: https://lore.kernel.org/linux-riscv/ZRuamJuShOnvP1pr@x1/ > Fixes: 484861e09f3e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC") > Signed-off-by: Jisheng Zhang <jszhang@kernel.org> > --- > drivers/soc/renesas/Kconfig | 1 + > 1 file changed, 1 insertion(+) > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Cheers, Prabhakar > diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig > index 5a75ab64d1ed..12040ce116a5 100644 > --- a/drivers/soc/renesas/Kconfig > +++ b/drivers/soc/renesas/Kconfig > @@ -333,6 +333,7 @@ if RISCV > > config ARCH_R9A07G043 > bool "RISC-V Platform support for RZ/Five" > + depends on NONPORTABLE > select ARCH_RZG2L > select AX45MP_L2_CACHE if RISCV_DMA_NONCOHERENT > select DMA_GLOBAL_POOL > -- > 2.40.1 >
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig index 5a75ab64d1ed..12040ce116a5 100644 --- a/drivers/soc/renesas/Kconfig +++ b/drivers/soc/renesas/Kconfig @@ -333,6 +333,7 @@ if RISCV config ARCH_R9A07G043 bool "RISC-V Platform support for RZ/Five" + depends on NONPORTABLE select ARCH_RZG2L select AX45MP_L2_CACHE if RISCV_DMA_NONCOHERENT select DMA_GLOBAL_POOL
Drew found "CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail" the log looks like: [ 3.741083] mmc0: Unable to allocate ADMA buffers - falling back to standard DMA The logic is: generic riscv defconfig selects ARCH_RENESAS then ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all non-dma-coherent riscv platforms have a dma global pool, this assumption seems not correct. And I believe DMA_GLOBAL_POOL should not be selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific conditions can select it globaly, for example NOMMU ARM and so on, because it's designed for special cases such as "nommu cases where non-cacheable memory lives in a fixed place in the physical address map" as pointed out by Robin. Fix the issue by making ARCH_R9A07G043 (riscv version) depend on NONPORTABLE, thus generic defconfig won't select ARCH_R9A07G043 by default. And even for random config case, there will be less debug effort once we see NONPORTABLE is enabled. Reported-by: Drew Fustini <dfustini@baylibre.com> Closes: https://lore.kernel.org/linux-riscv/ZRuamJuShOnvP1pr@x1/ Fixes: 484861e09f3e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> --- drivers/soc/renesas/Kconfig | 1 + 1 file changed, 1 insertion(+)