| Message ID | 20231005155618.700312-19-peter.griffin@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add minimal Tensor/GS101 SoC support and Oriole/Pixel6 board | expand |
On 05/10/2023 17:56, Peter Griffin wrote: > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile > phones. It features: > * 4xA55 little cluster > * 2xA76 Mid cluster > * 2xX1 Big cluster > > This commit adds the basic device tree for gs101 (SoC) and oriole > (pixel 6). Further platform support will be added over time. > > It has been tested with a minimal busybox initramfs and boots to > a shell. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm64/Kconfig.platforms | 6 + > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/google/Makefile | 6 + > arch/arm64/boot/dts/google/gs101-oriole.dts | 68 + > arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1134 +++++++++++++++++ > arch/arm64/boot/dts/google/gs101-pinctrl.h | 17 + > arch/arm64/boot/dts/google/gs101.dtsi | 501 ++++++++ Please split adding DTSI from adding DTS into two patches. > 7 files changed, 1733 insertions(+) > create mode 100644 arch/arm64/boot/dts/google/Makefile > create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h > create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi > > diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms > index 6069120199bb..a5ed1b719488 100644 > --- a/arch/arm64/Kconfig.platforms > +++ b/arch/arm64/Kconfig.platforms > @@ -107,6 +107,12 @@ config ARCH_EXYNOS > help > This enables support for ARMv8 based Samsung Exynos SoC family. > > +config ARCH_GOOGLE_TENSOR > + bool "Google Tensor SoC fmaily" > + depends on ARCH_EXYNOS > + help > + Support for ARMv8 based Google Tensor platforms. > + > config ARCH_SPARX5 > bool "Microchip Sparx5 SoC family" > select PINCTRL > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index 30dd6347a929..a4ee7b628114 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -13,6 +13,7 @@ subdir-y += broadcom > subdir-y += cavium > subdir-y += exynos > subdir-y += freescale > +subdir-y += google > subdir-y += hisilicon > subdir-y += intel > subdir-y += lg > diff --git a/arch/arm64/boot/dts/google/Makefile b/arch/arm64/boot/dts/google/Makefile > new file mode 100644 > index 000000000000..6d2026a767d4 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/Makefile > @@ -0,0 +1,6 @@ > +# SPDX-License-Identifier: GPL-2.0 > + > +dtb-$(CONFIG_ARCH_GOOGLE_TENSOR) += \ > + gs101-oriole.dtb \ > + > + Too many blank lines > diff --git a/arch/arm64/boot/dts/google/gs101-oriole.dts b/arch/arm64/boot/dts/google/gs101-oriole.dts > new file mode 100644 > index 000000000000..e531a39a76a4 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-oriole.dts > @@ -0,0 +1,68 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Oriole DVT Device Tree > + * > + * Copyright 2021-2023 Google,LLC > + */ > + > +/dts-v1/; > +/plugin/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include "gs101-pinctrl.h" > +#include "gs101.dtsi" > + > +/ { > + model = "Oriole DVT"; > + compatible = "google,gs101-oriole", "google,gs101"; > +}; > + > +&pinctrl_1 { > + key_voldown: key-voldown-pins { > + samsung,pins = "gpa7-3"; > + samsung,pin-function = <0xf>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + key_volup: key-volup-pins { > + samsung,pins = "gpa8-1"; > + samsung,pin-function = <0xf>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +&pinctrl_0 { > + key_power: key-power-pins { > + samsung,pins = "gpa10-1"; > + samsung,pin-function = <0xf>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +&gpio_keys { SoC does not have gpio-keys. That's entirely a property of the board. > + status = "okay"; Drop > + pinctrl-names = "default"; > + pinctrl-0 = <&key_voldown &key_volup &key_power>; Blank line > + button-vol-down { > + label = "KEY_VOLUMEDOWN"; > + linux,code = <114>; > + gpios = <&gpa7 3 0xf>; > + wakeup-source; > + }; Blank line > + button-vol-up { > + label = "KEY_VOLUMEUP"; > + linux,code = <115>; > + gpios = <&gpa8 1 0xf>; > + wakeup-source; > + }; Blank line > + button-power { > + label = "KEY_POWER"; > + linux,code = <116>; > + gpios = <&gpa10 1 0xf>; > + wakeup-source; > + }; > +}; > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > new file mode 100644 > index 000000000000..24825205ede8 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > @@ -0,0 +1,1134 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * GS101 SoC pin-mux and pin-config device tree source > + * > + * Copyright 2019-2023 Google LLC > + * > + */ > + > +#include <dt-bindings/interrupt-controller/gs101.h> > +#include <arm64/exynos/exynos-pinctrl.h> > +#include "gs101-pinctrl.h" > + > +/ { > + /* GPIO_ALIVE */ > + pinctrl@174d0000 { > + gpa0: gpa0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT0 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT1 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT2 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT3 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT4 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT5 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT6 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT7 ITLH>; > + }; Blank line > + gpa1: gpa1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT8 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT9 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT10 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT11 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT12 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT13 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT14 ITLH>; > + }; > + gpa2: gpa2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT15 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT16 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT17 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT18 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT19 ITLH>; > + }; > + gpa3: gpa3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT20 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT21 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT22 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT23 ITLH>; > + }; > + gpa4: gpa4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT24 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT25 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT26 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT27 ITLH>; > + }; > + gpa5: gpa5-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT28 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT29 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT30 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT31 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT32 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT33 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT34 ITLH>; > + }; > + gpa9: gpa9-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT35 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT36 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT37 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT38 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT39 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT40 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT41 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT42 ITLH>; > + }; > + gpa10: gpa10-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT43 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT44 ITLH>; > + }; > + > + uart15_bus: uart15-bus-pins { > + samsung,pins = "gpa2-3", "gpa2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + uart16_bus: uart16-bus-pins { > + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; You should rather create macros for your SoC... unless you are 100% sure this matches Exynos arm64 pinctrl. ... > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.h b/arch/arm64/boot/dts/google/gs101-pinctrl.h > new file mode 100644 > index 000000000000..acc77c684f0d > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.h > @@ -0,0 +1,17 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Pinctrl binding constants for GS101 > + * > + * Copyright (c) 2020-2023 Google, LLC. > + */ > + > +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__ > +#define __DT_BINDINGS_PINCTRL_GS101_H__ > + > +/* GS101 drive strengths */ > +#define GS101_PIN_DRV_2_5_MA 0 > +#define GS101_PIN_DRV_5_MA 1 > +#define GS101_PIN_DRV_7_5_MA 2 > +#define GS101_PIN_DRV_10_MA 3 > + > +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */ > diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi > new file mode 100644 > index 000000000000..0bd43745f6fa > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101.dtsi > @@ -0,0 +1,501 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * GS101 SoC > + * > + * Copyright 2019-2023 Google LLC > + * > + */ > + > +#include <dt-bindings/clock/gs101.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/interrupt-controller/gs101.h> > + > +#include "gs101-pinctrl.dtsi" > + > +/ { > + compatible = "google,gs101"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <1>; > + > + aliases { > + pinctrl0 = &pinctrl_0; > + pinctrl1 = &pinctrl_1; > + pinctrl2 = &pinctrl_2; > + pinctrl3 = &pinctrl_3; > + pinctrl4 = &pinctrl_4; > + pinctrl5 = &pinctrl_5; > + pinctrl6 = &pinctrl_6; > + pinctrl7 = &pinctrl_7; > + Stray blank line > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + core1 { > + cpu = <&cpu1>; > + }; > + core2 { > + cpu = <&cpu2>; > + }; > + core3 { > + cpu = <&cpu3>; > + }; > + }; Blank line > + cluster1 { > + core0 { > + cpu = <&cpu4>; > + }; > + core1 { > + cpu = <&cpu5>; > + }; > + }; Blank line > + cluster2 { > + core0 { > + cpu = <&cpu6>; > + }; > + core1 { > + cpu = <&cpu7>; > + }; > + }; > + }; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0000>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; Blank line > + cpu1: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0100>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + cpu2: cpu@200 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0200>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + cpu3: cpu@300 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0300>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + cpu4: cpu@400 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0400>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + cpu5: cpu@500 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0500>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + cpu6: cpu@600 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0600>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + cpu7: cpu@700 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0700>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + ANANKE_CPU_SLEEP: cpu-ananke-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <70>; > + exit-latency-us = <160>; > + min-residency-us = <2000>; > + status = "okay"; Drop status. Okay is by default. > + }; > + > + ENYO_CPU_SLEEP: cpu-enyo-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <150>; > + exit-latency-us = <190>; > + min-residency-us = <2500>; > + status = "okay"; Drop status. Okay is by default. > + }; > + > + HERA_CPU_SLEEP: cpu-hera-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <235>; > + exit-latency-us = <220>; > + min-residency-us = <3500>; > + status = "okay"; Drop status. Okay is by default. > + }; > + }; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + reserved_memory: reserved-memory { > + #address-cells = <2>; > + #size-cells = <1>; > + ranges; > + > + tpu_fw_reserved: tpu_fw@93000000 { No underscores in node names. Use hyphens. > + reg = <0x0 0x93000000 0x1000000>; > + no-map; > + }; > + > + gsa_reserved_protected: gsa@90200000 { > + reg = <0x0 0x90200000 0x400000>; > + no-map; > + }; > + > + aoc_reserve: aoc@94000000 { > + reg = <0x0 0x94000000 0x03000000>; > + no-map; > + }; > + > + abl_reserved: abl@f8800000 { > + reg = <0x0 0xf8800000 0x02000000>; > + no-map; > + }; > + > + dss_log_reserved: dss_log_reserved@fd3f0000 { > + reg = <0 0xfd3f0000 0x0000e000>; > + no-map; > + }; > + > + debug_kinfo_reserved: debug_kinfo_reserved@fd3fe000 { > + reg = <0 0xfd3fe000 0x00001000>; > + no-map; > + }; > + > + bldr_log_reserved: bldr_log_reserved@fd800000 { > + reg = <0 0xfd800000 0x00100000>; > + no-map; > + }; > + > + bldr_log_hist_reserved: bldr_log_hist_reserved@fd900000 { > + reg = <0 0xfd900000 0x00002000>; > + no-map; > + }; > + }; > + > + /* bootloader requires ect node */ > + ect { > + parameter_address = <0x90000000>; > + parameter_size = <0x53000>; > + }; > + > + chosen { Please order the nodes by name. > + bootargs = "earlycon=exynos4210,mmio32,0x10A00000 clk_ignore_unused"; None of these bootargs are suitable for wide, mainline use. Please drop. > + }; > + > + gic: interrupt-controller@10400000 { This cannot be outside of SoC. > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x0 0x10400000 0x10000>, /* GICD */ > + <0x0 0x10440000 0x100000>; /* GICR * 8 */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <24576000>; > + }; > + > + ext_24_5m: ext_24_5m { clock-1 > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; > + clock-output-names = "oscclk"; > + }; > + > + ext_200m: ext_200m { clock-2 > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <200000000>; > + clock-output-names = "ext-200m"; > + }; > + > + /* GPIO_ALIVE */ > + pinctrl_0: pinctrl@174d0000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x174d0000 0x00001000>; 0x0 Please open Tesla FSD or Exynos850 for examples. Also, this cannot be outside of SoC. There is no way this passes dtbs_check W=1. Nodes in MMIO-bus should be ordered by unit address. > + interrupts = <GIC_SPI IRQ_ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT32 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT33 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT34 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT35 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT36 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT37 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT38 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT39 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT40 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT41 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT42 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT43 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT44 IRQ_TYPE_LEVEL_HIGH>; > + > + wakeup-interrupt-controller { > + compatible = "google,gs101-wakeup-eint"; > + }; > + }; > + > + /* GPIO_FAR_ALIVE */ > + pinctrl_1: pinctrl@174e0000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x174e0000 0x00001000>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT45 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT46 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT47 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT48 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT49 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT50 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT51 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT52 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT53 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT54 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT55 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT56 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT57 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT58 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT59 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT60 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT61 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT62 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT63 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT64 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT65 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT66 IRQ_TYPE_LEVEL_HIGH>; > + > + wakeup-interrupt-controller { > + compatible = "google,gs101-wakeup-eint"; > + }; > + }; > + > + /* GPIO_GSACORE */ > + pinctrl_2: pinctrl@17a80000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x17a80000 0x00001000>; > + }; > + /* GPIO_GSACTRL */ > + pinctrl_3: pinctrl@17940000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x17940000 0x00001000>; > + }; > + /* GPIO_PERIC0 */ > + pinctrl_4: pinctrl@10840000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x10840000 0x00001000>; > + interrupts = <GIC_SPI IRQ_GPIO_PERIC0_PERIC0 IRQ_TYPE_LEVEL_HIGH>; > + }; > + /* GPIO_PERIC1 */ > + pinctrl_5: pinctrl@10c40000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x10C40000 0x00001000>; > + interrupts = <GIC_SPI IRQ_GPIO_PERIC1_PERIC1 IRQ_TYPE_LEVEL_HIGH>; > + }; > + /* GPIO_HSI1 */ > + pinctrl_6: pinctrl@11840000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x11840000 0x00001000>; > + interrupts = <GIC_SPI IRQ_GPIO_HSI1_HSI1 IRQ_TYPE_LEVEL_HIGH>; > + }; > + /* GPIO_HSI2 */ > + pinctrl_7: pinctrl@14440000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x14440000 0x00001000>; > + interrupts = <GIC_SPI IRQ_GPIO_HSI2_HSI2 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + arm-pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + sysreg_apm: syscon@174204e0 { > + compatible = "google,gs101-apm-sysreg", > + "google,gs101-sysreg", "syscon"; > + reg = <0x0 0x174204e0 0x1000>; > + }; > + > + sysreg_peric0: syscon@10821000 { > + compatible = "google,gs101-peric0-sysreg", > + "google,gs101-sysreg", "syscon"; > + reg = <0x0 0x10821000 0x40000>; > + }; > + > + sysreg_peric1: syscon@10c21000 { > + compatible = "google,gs101-peric1-sysreg", > + "google,gs101-sysreg", "syscon"; > + reg = <0x0 0x10C21000 0x40000>; > + }; > + > + /* TODO replace with CCF clock */ > + dummy_clk: oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <12345>; One space before = > + clock-output-names = "pclk"; > + }; > + > + serial_0: serial@10a00000 { > + compatible = "samsung,exynos850-uart"; You need also specific compatible for GS. Fallback can stay. > + reg = <0x0 0x10a00000 0xc0>; > + reg-io-width = <4>; > + samsung,uart-fifosize = <256>; > + interrupts = <GIC_SPI IRQ_USI0_UART_PERIC0 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&dummy_clk 0>, <&dummy_clk 0>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "okay"; Drop, it's default. > + }; > + > + pmu_system_controller: system-controller@17460000 { > + compatible = "google,gs101-pmu", "syscon"; > + reg = <0x0 0x17460000 0x10000>; > + }; > + > + watchdog_cl0: watchdog@10060000 { > + compatible = "google,gs101-wdt"; > + reg = <0x0 0x10060000 0x100>; > + interrupts = <GIC_SPI IRQ_WDT_CLUSTER0_MISC IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0>, <&ext_24_5m>; > + clock-names = "watchdog", "watchdog_src"; > + timeout-sec = <30>; This is rather property of the board. > + samsung,syscon-phandle = <&pmu_system_controller>; > + samsung,cluster-index = <0>; > + }; > + > + watchdog_cl1: watchdog@10070000 { > + compatible = "google,gs101-wdt"; > + reg = <0x0 0x10070000 0x100>; > + interrupts = <GIC_SPI IRQ_WDT_CLUSTER1_MISC IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1>, <&ext_24_5m>; > + clock-names = "watchdog", "watchdog_src"; > + timeout-sec = <30>; > + samsung,syscon-phandle = <&pmu_system_controller>; > + samsung,cluster-index = <1>; > + status = "disabled"; > + }; > + > + cmu_top: clock-controller@1e080000 { > + compatible = "google,gs101-cmu-top"; > + reg = <0x0 0x1e080000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>; > + clock-names = "oscclk"; > + }; > + > + cmu_apm: clock-controller@17400000 { > + compatible = "google,gs101-cmu-apm"; > + reg = <0x0 0x17400000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>; > + clock-names = "oscclk"; > + }; > + > + cmu_misc: clock-controller@10010000 { > + compatible = "google,gs101-cmu-misc"; > + reg = <0x0 0x10010000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>; > + clock-names = "oscclk", "dout_cmu_misc_bus"; > + }; > + > + dsu-pmu-0 { > + compatible = "arm,dsu-pmu"; > + interrupts = <GIC_SPI IRQ_CPUCL0_CLUSTERPMUIRQ_CPUCL0 IRQ_TYPE_LEVEL_HIGH>; > + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; > + }; > + > + gpio_keys: gpio_keys { > + compatible = "gpio-keys"; That's not a property of the SoC. > + }; > + Stray blank line. > +}; Best regards, Krzysztof
On 10/05/2023, Peter Griffin wrote: > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile > phones. It features: > * 4xA55 little cluster > * 2xA76 Mid cluster > * 2xX1 Big cluster > > This commit adds the basic device tree for gs101 (SoC) and oriole > (pixel 6). Further platform support will be added over time. > > It has been tested with a minimal busybox initramfs and boots to > a shell. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm64/Kconfig.platforms | 6 + > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/google/Makefile | 6 + > arch/arm64/boot/dts/google/gs101-oriole.dts | 68 + > arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1134 +++++++++++++++++ > arch/arm64/boot/dts/google/gs101-pinctrl.h | 17 + > arch/arm64/boot/dts/google/gs101.dtsi | 501 ++++++++ > 7 files changed, 1733 insertions(+) > create mode 100644 arch/arm64/boot/dts/google/Makefile > create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h > create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi > > diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms > index 6069120199bb..a5ed1b719488 100644 > --- a/arch/arm64/Kconfig.platforms > +++ b/arch/arm64/Kconfig.platforms > @@ -107,6 +107,12 @@ config ARCH_EXYNOS > help > This enables support for ARMv8 based Samsung Exynos SoC family. > > +config ARCH_GOOGLE_TENSOR > + bool "Google Tensor SoC fmaily" > + depends on ARCH_EXYNOS > + help > + Support for ARMv8 based Google Tensor platforms. I'd like to bring up this thread and discuss the option of not introducing another ARCH_* config: https://lore.kernel.org/all/20200306103652.GA3634389@kroah.com/ I especially don't like the "depends on ARCH_EXYNOS" because that forces one to include all the other Exynos drivers that ARCH_EXYNOS selects that Google Tensor SoCs don't need. Can we consider using SOC_GOOGLE instead and for all drivers that actually depend on the SoC hardware, we can just add "depends on SOC_GOOGLE"? The idea is that drivers should be tied to hardware -- not a specific vendor. By making drivers depend on ARCH_*, you are introducing an arbitrary vendor dependency and not a hardware dependency. Thanks, Will > + > config ARCH_SPARX5 > bool "Microchip Sparx5 SoC family" > select PINCTRL > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index 30dd6347a929..a4ee7b628114 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -13,6 +13,7 @@ subdir-y += broadcom > subdir-y += cavium > subdir-y += exynos > subdir-y += freescale > +subdir-y += google > subdir-y += hisilicon > subdir-y += intel > subdir-y += lg > diff --git a/arch/arm64/boot/dts/google/Makefile b/arch/arm64/boot/dts/google/Makefile > new file mode 100644 > index 000000000000..6d2026a767d4 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/Makefile > @@ -0,0 +1,6 @@ > +# SPDX-License-Identifier: GPL-2.0 > + > +dtb-$(CONFIG_ARCH_GOOGLE_TENSOR) += \ > + gs101-oriole.dtb \ > + > + > diff --git a/arch/arm64/boot/dts/google/gs101-oriole.dts b/arch/arm64/boot/dts/google/gs101-oriole.dts > new file mode 100644 > index 000000000000..e531a39a76a4 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-oriole.dts > @@ -0,0 +1,68 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Oriole DVT Device Tree > + * > + * Copyright 2021-2023 Google,LLC > + */ > + > +/dts-v1/; > +/plugin/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include "gs101-pinctrl.h" > +#include "gs101.dtsi" > + > +/ { > + model = "Oriole DVT"; > + compatible = "google,gs101-oriole", "google,gs101"; > +}; > + > +&pinctrl_1 { > + key_voldown: key-voldown-pins { > + samsung,pins = "gpa7-3"; > + samsung,pin-function = <0xf>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + key_volup: key-volup-pins { > + samsung,pins = "gpa8-1"; > + samsung,pin-function = <0xf>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +&pinctrl_0 { > + key_power: key-power-pins { > + samsung,pins = "gpa10-1"; > + samsung,pin-function = <0xf>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +&gpio_keys { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&key_voldown &key_volup &key_power>; > + button-vol-down { > + label = "KEY_VOLUMEDOWN"; > + linux,code = <114>; > + gpios = <&gpa7 3 0xf>; > + wakeup-source; > + }; > + button-vol-up { > + label = "KEY_VOLUMEUP"; > + linux,code = <115>; > + gpios = <&gpa8 1 0xf>; > + wakeup-source; > + }; > + button-power { > + label = "KEY_POWER"; > + linux,code = <116>; > + gpios = <&gpa10 1 0xf>; > + wakeup-source; > + }; > +}; > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > new file mode 100644 > index 000000000000..24825205ede8 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > @@ -0,0 +1,1134 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * GS101 SoC pin-mux and pin-config device tree source > + * > + * Copyright 2019-2023 Google LLC > + * > + */ > + > +#include <dt-bindings/interrupt-controller/gs101.h> > +#include <arm64/exynos/exynos-pinctrl.h> > +#include "gs101-pinctrl.h" > + > +/ { > + /* GPIO_ALIVE */ > + pinctrl@174d0000 { > + gpa0: gpa0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT0 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT1 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT2 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT3 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT4 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT5 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT6 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT7 ITLH>; > + }; > + gpa1: gpa1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT8 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT9 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT10 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT11 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT12 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT13 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT14 ITLH>; > + }; > + gpa2: gpa2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT15 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT16 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT17 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT18 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT19 ITLH>; > + }; > + gpa3: gpa3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT20 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT21 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT22 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT23 ITLH>; > + }; > + gpa4: gpa4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT24 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT25 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT26 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT27 ITLH>; > + }; > + gpa5: gpa5-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT28 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT29 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT30 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT31 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT32 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT33 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT34 ITLH>; > + }; > + gpa9: gpa9-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT35 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT36 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT37 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT38 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT39 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT40 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT41 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT42 ITLH>; > + }; > + gpa10: gpa10-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT43 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT44 ITLH>; > + }; > + > + uart15_bus: uart15-bus-pins { > + samsung,pins = "gpa2-3", "gpa2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + uart16_bus: uart16-bus-pins { > + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + }; > + > + uart16_bus_rts: uart1-bus-rts-pins { > + samsung,pins = "gpa3-2"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-val = <1>; > + }; > + > + uart16_bus_tx_dat: uart1-bus-tx-dat-pins { > + samsung,pins = "gpa3-1"; > + samsung,pin-val = <1>; > + }; > + > + uart16_bus_tx_con: uart1-bus-tx-con-pins { > + samsung,pins = "gpa3-1"; > + samsung,pin-function = <1>; > + }; > + > + uart17_bus: uart17-bus-pins { > + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi15_bus: spi15-bus-pins { > + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi15_cs: spi15-cs-pins { > + samsung,pins = "gpa4-3"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + }; > + /* GPIO_FAR_ALIVE */ > + pinctrl@174e0000 { > + gpa6: gpa6-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT45 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT46 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT47 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT48 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT49 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT50 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT51 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT52 ITLH>; > + }; > + gpa7: gpa7-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT53 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT54 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT55 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT56 ITLH>; > + }; > + gpa8: gpa8-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT57 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT58 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT59 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT60 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT61 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT62 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT63 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT64 ITLH>; > + }; > + gpa11: gpa11-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT65 ITLH>, > + <GIC_SPI IRQ_ALIVE_EINT66 ITLH>; > + }; > + > + }; > + /* GPIO_GSACORE */ > + pinctrl@17a80000 { > + gps0: gps0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gps1: gps1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gps2: gps2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + /* GPIO_GSACTRL */ > + pinctrl@17940000 { > + gps3: gps3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + /* GPIO_HSI1 */ > + pinctrl@11840000 { > + gph0: gph0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gph1: gph1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + pcie0_clkreq: pcie0-clkreq-pins{ > + samsung,pins = "gph0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <3>; > + }; > + pcie0_perst: pcie0-perst-pins { > + samsung,pins = "gph0-0"; > + samsung,pin-function = <1>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + }; > + }; > + /* GPIO_HSI2 */ > + pinctrl@14440000 { > + gph2: gph2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gph3: gph3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gph4: gph4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + sd2_clk: sd2-clk-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_cmd: sd2-cmd-pins { > + samsung,pins = "gph4-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_bus1: sd2-bus-width1-pins { > + samsung,pins = "gph4-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_bus4: sd2-bus-width4-pins { > + samsung,pins = "gph4-3", "gph4-4", "gph4-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + }; > + ufs_rst_n: ufs-rst-n-pins { > + samsung,pins = "gph3-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <0>; > + }; > + > + ufs_refclk_out: ufs-refclk-out-pins { > + samsung,pins = "gph3-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <0>; > + }; > + pcie1_clkreq: pcie1-clkreq-pins { > + samsung,pins = "gph2-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <3>; > + }; > + pcie1_perst: pcie1-perst-pins { > + samsung,pins = "gph2-0"; > + samsung,pin-function = <1>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + }; > + }; > + /* GPIO_PERIC0 */ > + pinctrl@10840000 { > + gpp0: gpp0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp1: gpp1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp2: gpp2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp3: gpp3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp4: gpp4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp5: gpp5-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp6: gpp6-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp7: gpp7-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp8: gpp8-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp9: gpp9-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp10: gpp10-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp11: gpp11-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp12: gpp12-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp13: gpp13-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp14: gpp14-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp15: gpp15-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp16: gpp16-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp17: gpp17-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp18: gpp18-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp19: gpp19-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + /* USI_PERIC0_UART_DBG */ > + uart0_bus: uart0-bus-pins { > + samsung,pins = "gpp1-2", "gpp1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + disp_te_pri_on: disp-te-pri-on-pins { > + samsung,pins = "gpp0-3"; > + samsung,pin-function = <0xf>; > + }; > + > + disp_te_pri_off: disp-te-pri-off-pins { > + samsung,pins = "gpp0-3"; > + samsung,pin-function = <0>; > + }; > + > + disp_te_sec_on: disp-te-sec-on-pins { > + samsung,pins = "gpp0-4"; > + samsung,pin-function = <0xf>; > + }; > + > + disp_te_sec_off: disp-te-sec-off-pins { > + samsung,pins = "gpp0-4"; > + samsung,pin-function = <0>; > + }; > + > + sensor_mclk1_out: sensor-mclk1-out-pins { > + samsung,pins = "gpp3-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk1_fn: sensor-mclk1-fn-pins { > + samsung,pins = "gpp3-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk2_out: sensor-mclk2-out-pins { > + samsung,pins = "gpp5-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk2_fn: sensor-mclk2-fn-pins { > + samsung,pins = "gpp5-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk3_out: sensor-mclk3-out-pins { > + samsung,pins = "gpp7-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk3_fn: sensor-mclk3-fn-pins { > + samsung,pins = "gpp7-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk4_out: sensor-mclk4-out-pins { > + samsung,pins = "gpp9-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk4_fn: sensor-mclk4-fn-pins { > + samsung,pins = "gpp9-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk5_out: sensor-mclk5-out-pins { > + samsung,pins = "gpp11-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk5_fn: sensor-mclk5-fn-pins { > + samsung,pins = "gpp11-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk6_out: sensor-mclk6-out-pins { > + samsung,pins = "gpp13-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk6_fn: sensor-mclk6-fn-pins { > + samsung,pins = "gpp13-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk7_out: sensor-mclk7-out-pins { > + samsung,pins = "gpp15-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk7_fn: sensor-mclk7-fn-pins { > + samsung,pins = "gpp15-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk8_out: sensor-mclk8-out-pins { > + samsung,pins = "gpp17-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + sensor_mclk8_fn: sensor-mclk8-fn-pins { > + samsung,pins = "gpp17-0"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + hsi2c14_bus: hsi2c14-bus-pins { > + samsung,pins = "gpp18-0", "gpp18-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart14_bus_single: uart14-bus-pins { > + samsung,pins = "gpp18-0", "gpp18-1", > + "gpp18-2", "gpp18-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + spi14_bus: spi14-bus-pins { > + samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi14_cs: spi14-cs-pins { > + samsung,pins = "gpp18-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi14_cs_func: spi14-cs-func-pins { > + samsung,pins = "gpp18-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c8_bus: hsi2c8-bus-pins { > + samsung,pins = "gpp16-0", "gpp16-1"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + samsung,pin-pud-pdn = <EXYNOS_PIN_PDN_OUT0>; > + }; > + uart8_bus_single: uart8-bus-pins { > + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2", > + "gpp16-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + spi8_bus: spi8-bus-pins { > + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi8_cs: spi8-cs-pins { > + samsung,pins = "gpp16-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi8_cs_func: spi8-cs-func-pins { > + samsung,pins = "gpp16-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c7_bus: hsi2c7-bus-pins { > + samsung,pins = "gpp14-0", "gpp14-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart7_bus_single: uart7-bus-pins { > + samsung,pins = "gpp14-0", "gpp14-1", > + "gpp14-2", "gpp14-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + spi7_bus: spi7-bus-pins { > + samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi7_cs: spi7-cs-pins { > + samsung,pins = "gpp14-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi7_cs_func: spi7-cs-func-pins { > + samsung,pins = "gpp14-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c6_bus: hsi2c6-bus-pins { > + samsung,pins = "gpp12-0", "gpp12-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart6_bus_single: uart6-bus-pins { > + samsung,pins = "gpp12-0", "gpp12-1", > + "gpp12-2", "gpp12-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + spi6_bus: spi6-bus-pins { > + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi6_cs: spi6-cs-pins { > + samsung,pins = "gpp12-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi6_cs_func: spi6-cs-func-pins { > + samsung,pins = "gpp12-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c5_bus: hsi2c5-bus-pins { > + samsung,pins = "gpp10-0", "gpp10-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart5_bus_single: uart5-bus-pins { > + samsung,pins = "gpp10-0", "gpp10-1", > + "gpp10-2", "gpp10-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + spi5_bus: spi5-bus-pins { > + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; > + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; > + }; > + spi5_cs_func: spi5-cs-func-pins { > + samsung,pins = "gpp10-3"; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; > + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; > + }; > + hsi2c4_bus: hsi2c4-bus-pins { > + samsung,pins = "gpp8-0", "gpp8-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart4_bus_single: uart4-bus-pins { > + samsung,pins = "gpp8-0", "gpp8-1", > + "gpp8-2", "gpp8-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + spi4_bus: spi4-bus-pins { > + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi4_cs: spi4-cs-pins { > + samsung,pins = "gpp8-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi4_cs_func: spi4-cs-func-pins { > + samsung,pins = "gpp8-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c3_bus: hsi2c3-bus-pins { > + samsung,pins = "gpp6-0", "gpp6-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart3_bus_single: uart3-bus-pins { > + samsung,pins = "gpp6-0", "gpp6-1", > + "gpp6-2", "gpp6-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + spi3_bus: spi3-bus-pins { > + samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi3_cs: spi3-cs-pins { > + samsung,pins = "gpp6-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi3_cs_func: spi3-cs-func-pins { > + samsung,pins = "gpp6-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c2_bus: hsi2c2-bus-pins { > + samsung,pins = "gpp4-0", "gpp4-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart2_bus_single: uart2-bus-pins { > + samsung,pins = "gpp4-0", "gpp4-1", > + "gpp4-2", "gpp4-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + spi2_bus: spi2-bus-pins { > + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi2_cs: spi2-cs-pins { > + samsung,pins = "gpp4-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi2_cs_func: spi2-cs-func-pins { > + samsung,pins = "gpp4-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c1_bus: hsi2c1-bus-pins { > + samsung,pins = "gpp2-0", "gpp2-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart1_bus_single: uart1-bus-pins { > + samsung,pins = "gpp2-0", "gpp2-1", > + "gpp2-2", "gpp2-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + spi1_bus: spi1-bus-pins { > + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi1_cs: spi1-cs-pins { > + samsung,pins = "gpp2-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi1_cs_func: spi1-cs-func-pins { > + samsung,pins = "gpp2-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + }; > + /* GPIO_PERIC1 */ > + pinctrl@10c40000 { > + gpp20: gpp20-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp21: gpp21-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp22: gpp22-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp23: gpp23-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp24: gpp24-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp25: gpp25-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp26: gpp26-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + gpp27: gpp27-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + hsi2c13_bus: hsi2c13-bus-pins { > + samsung,pins = "gpp25-0", "gpp25-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart13_bus_single: uart13-bus-pins { > + samsung,pins = "gpp25-0", "gpp25-1", > + "gpp25-2", "gpp25-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + spi13_bus: spi13-bus-pins { > + samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi13_cs: spi13-cs-pins { > + samsung,pins = "gpp25-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi13_cs_func: spi13-cs-func-pins { > + samsung,pins = "gpp25-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c12_bus: hsi2c12-bus-pins { > + samsung,pins = "gpp23-4", "gpp23-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart12_bus_single: uart12-bus-pins { > + samsung,pins = "gpp23-4", "gpp23-5", > + "gpp23-6", "gpp23-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + spi12_bus: spi12-bus-pins { > + samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi14_cs2: spi14-cs2-pins { > + samsung,pins = "gpp23-6"; > + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi12_cs: spi12-cs-pins { > + samsung,pins = "gpp23-7"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi12_cs_func: spi12-cs-func-pins { > + samsung,pins = "gpp23-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c11_bus: hsi2c11-bus-pins { > + samsung,pins = "gpp23-0", "gpp23-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart11_bus_single: uart11-bus-pins { > + samsung,pins = "gpp23-0", "gpp23-1", > + "gpp23-2", "gpp23-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + spi11_bus: spi11-bus-pins { > + samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi11_cs: spi11-cs-pins { > + samsung,pins = "gpp23-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi11_cs_func: spi11-cs-func-pins { > + samsung,pins = "gpp23-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c10_bus: hsi2c10-bus-pins { > + samsung,pins = "gpp21-0", "gpp21-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart10_bus_single: uart10-bus-pins { > + samsung,pins = "gpp21-0", "gpp21-1", > + "gpp21-2", "gpp21-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + spi10_bus: spi10-bus-pins { > + samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi10_cs: spi10-cs-pins { > + samsung,pins = "gpp21-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi10_cs_func: spi10-cs-func-pins { > + samsung,pins = "gpp21-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c9_bus: hsi2c9-bus-pins { > + samsung,pins = "gpp20-4", "gpp20-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart9_bus_single: uart9-bus-pins { > + samsung,pins = "gpp20-4", "gpp20-5", > + "gpp20-6", "gpp20-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + spi9_bus: spi9-bus-pins { > + samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi9_cs: spi9-cs-pins { > + samsung,pins = "gpp20-7"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi9_cs_func: spi9-cs-func-pins { > + samsung,pins = "gpp20-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + hsi2c0_bus: hsi2c0-bus-pins { > + samsung,pins = "gpp20-0", "gpp20-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + uart0_bus_single: uart0-bus-pins { > + samsung,pins = "gpp20-0", "gpp20-1", > + "gpp20-2", "gpp20-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + spi0_bus: spi0-bus-pins { > + samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi0_cs: spi0-cs-pins { > + samsung,pins = "gpp20-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + spi0_cs_func: spi0-cs-func-pins { > + samsung,pins = "gpp20-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.h b/arch/arm64/boot/dts/google/gs101-pinctrl.h > new file mode 100644 > index 000000000000..acc77c684f0d > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.h > @@ -0,0 +1,17 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Pinctrl binding constants for GS101 > + * > + * Copyright (c) 2020-2023 Google, LLC. > + */ > + > +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__ > +#define __DT_BINDINGS_PINCTRL_GS101_H__ > + > +/* GS101 drive strengths */ > +#define GS101_PIN_DRV_2_5_MA 0 > +#define GS101_PIN_DRV_5_MA 1 > +#define GS101_PIN_DRV_7_5_MA 2 > +#define GS101_PIN_DRV_10_MA 3 > + > +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */ > diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi > new file mode 100644 > index 000000000000..0bd43745f6fa > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101.dtsi > @@ -0,0 +1,501 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * GS101 SoC > + * > + * Copyright 2019-2023 Google LLC > + * > + */ > + > +#include <dt-bindings/clock/gs101.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/interrupt-controller/gs101.h> > + > +#include "gs101-pinctrl.dtsi" > + > +/ { > + compatible = "google,gs101"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <1>; > + > + aliases { > + pinctrl0 = &pinctrl_0; > + pinctrl1 = &pinctrl_1; > + pinctrl2 = &pinctrl_2; > + pinctrl3 = &pinctrl_3; > + pinctrl4 = &pinctrl_4; > + pinctrl5 = &pinctrl_5; > + pinctrl6 = &pinctrl_6; > + pinctrl7 = &pinctrl_7; > + > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + core1 { > + cpu = <&cpu1>; > + }; > + core2 { > + cpu = <&cpu2>; > + }; > + core3 { > + cpu = <&cpu3>; > + }; > + }; > + cluster1 { > + core0 { > + cpu = <&cpu4>; > + }; > + core1 { > + cpu = <&cpu5>; > + }; > + }; > + cluster2 { > + core0 { > + cpu = <&cpu6>; > + }; > + core1 { > + cpu = <&cpu7>; > + }; > + }; > + }; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0000>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + cpu1: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0100>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + cpu2: cpu@200 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0200>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + cpu3: cpu@300 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0300>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + cpu4: cpu@400 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0400>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + cpu5: cpu@500 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0500>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + cpu6: cpu@600 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0600>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + cpu7: cpu@700 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0700>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + ANANKE_CPU_SLEEP: cpu-ananke-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <70>; > + exit-latency-us = <160>; > + min-residency-us = <2000>; > + status = "okay"; > + }; > + > + ENYO_CPU_SLEEP: cpu-enyo-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <150>; > + exit-latency-us = <190>; > + min-residency-us = <2500>; > + status = "okay"; > + }; > + > + HERA_CPU_SLEEP: cpu-hera-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <235>; > + exit-latency-us = <220>; > + min-residency-us = <3500>; > + status = "okay"; > + }; > + }; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + reserved_memory: reserved-memory { > + #address-cells = <2>; > + #size-cells = <1>; > + ranges; > + > + tpu_fw_reserved: tpu_fw@93000000 { > + reg = <0x0 0x93000000 0x1000000>; > + no-map; > + }; > + > + gsa_reserved_protected: gsa@90200000 { > + reg = <0x0 0x90200000 0x400000>; > + no-map; > + }; > + > + aoc_reserve: aoc@94000000 { > + reg = <0x0 0x94000000 0x03000000>; > + no-map; > + }; > + > + abl_reserved: abl@f8800000 { > + reg = <0x0 0xf8800000 0x02000000>; > + no-map; > + }; > + > + dss_log_reserved: dss_log_reserved@fd3f0000 { > + reg = <0 0xfd3f0000 0x0000e000>; > + no-map; > + }; > + > + debug_kinfo_reserved: debug_kinfo_reserved@fd3fe000 { > + reg = <0 0xfd3fe000 0x00001000>; > + no-map; > + }; > + > + bldr_log_reserved: bldr_log_reserved@fd800000 { > + reg = <0 0xfd800000 0x00100000>; > + no-map; > + }; > + > + bldr_log_hist_reserved: bldr_log_hist_reserved@fd900000 { > + reg = <0 0xfd900000 0x00002000>; > + no-map; > + }; > + }; > + > + /* bootloader requires ect node */ > + ect { > + parameter_address = <0x90000000>; > + parameter_size = <0x53000>; > + }; > + > + chosen { > + bootargs = "earlycon=exynos4210,mmio32,0x10A00000 clk_ignore_unused"; > + }; > + > + gic: interrupt-controller@10400000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x0 0x10400000 0x10000>, /* GICD */ > + <0x0 0x10440000 0x100000>; /* GICR * 8 */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <24576000>; > + }; > + > + ext_24_5m: ext_24_5m { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; > + clock-output-names = "oscclk"; > + }; > + > + ext_200m: ext_200m { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <200000000>; > + clock-output-names = "ext-200m"; > + }; > + > + /* GPIO_ALIVE */ > + pinctrl_0: pinctrl@174d0000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x174d0000 0x00001000>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT32 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT33 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT34 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT35 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT36 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT37 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT38 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT39 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT40 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT41 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT42 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT43 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT44 IRQ_TYPE_LEVEL_HIGH>; > + > + wakeup-interrupt-controller { > + compatible = "google,gs101-wakeup-eint"; > + }; > + }; > + > + /* GPIO_FAR_ALIVE */ > + pinctrl_1: pinctrl@174e0000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x174e0000 0x00001000>; > + interrupts = <GIC_SPI IRQ_ALIVE_EINT45 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT46 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT47 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT48 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT49 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT50 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT51 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT52 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT53 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT54 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT55 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT56 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT57 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT58 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT59 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT60 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT61 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT62 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT63 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT64 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT65 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI IRQ_ALIVE_EINT66 IRQ_TYPE_LEVEL_HIGH>; > + > + wakeup-interrupt-controller { > + compatible = "google,gs101-wakeup-eint"; > + }; > + }; > + > + /* GPIO_GSACORE */ > + pinctrl_2: pinctrl@17a80000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x17a80000 0x00001000>; > + }; > + /* GPIO_GSACTRL */ > + pinctrl_3: pinctrl@17940000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x17940000 0x00001000>; > + }; > + /* GPIO_PERIC0 */ > + pinctrl_4: pinctrl@10840000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x10840000 0x00001000>; > + interrupts = <GIC_SPI IRQ_GPIO_PERIC0_PERIC0 IRQ_TYPE_LEVEL_HIGH>; > + }; > + /* GPIO_PERIC1 */ > + pinctrl_5: pinctrl@10c40000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x10C40000 0x00001000>; > + interrupts = <GIC_SPI IRQ_GPIO_PERIC1_PERIC1 IRQ_TYPE_LEVEL_HIGH>; > + }; > + /* GPIO_HSI1 */ > + pinctrl_6: pinctrl@11840000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x11840000 0x00001000>; > + interrupts = <GIC_SPI IRQ_GPIO_HSI1_HSI1 IRQ_TYPE_LEVEL_HIGH>; > + }; > + /* GPIO_HSI2 */ > + pinctrl_7: pinctrl@14440000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x00000000 0x14440000 0x00001000>; > + interrupts = <GIC_SPI IRQ_GPIO_HSI2_HSI2 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + arm-pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + sysreg_apm: syscon@174204e0 { > + compatible = "google,gs101-apm-sysreg", > + "google,gs101-sysreg", "syscon"; > + reg = <0x0 0x174204e0 0x1000>; > + }; > + > + sysreg_peric0: syscon@10821000 { > + compatible = "google,gs101-peric0-sysreg", > + "google,gs101-sysreg", "syscon"; > + reg = <0x0 0x10821000 0x40000>; > + }; > + > + sysreg_peric1: syscon@10c21000 { > + compatible = "google,gs101-peric1-sysreg", > + "google,gs101-sysreg", "syscon"; > + reg = <0x0 0x10C21000 0x40000>; > + }; > + > + /* TODO replace with CCF clock */ > + dummy_clk: oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <12345>; > + clock-output-names = "pclk"; > + }; > + > + serial_0: serial@10a00000 { > + compatible = "samsung,exynos850-uart"; > + reg = <0x0 0x10a00000 0xc0>; > + reg-io-width = <4>; > + samsung,uart-fifosize = <256>; > + interrupts = <GIC_SPI IRQ_USI0_UART_PERIC0 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&dummy_clk 0>, <&dummy_clk 0>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "okay"; > + }; > + > + pmu_system_controller: system-controller@17460000 { > + compatible = "google,gs101-pmu", "syscon"; > + reg = <0x0 0x17460000 0x10000>; > + }; > + > + watchdog_cl0: watchdog@10060000 { > + compatible = "google,gs101-wdt"; > + reg = <0x0 0x10060000 0x100>; > + interrupts = <GIC_SPI IRQ_WDT_CLUSTER0_MISC IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0>, <&ext_24_5m>; > + clock-names = "watchdog", "watchdog_src"; > + timeout-sec = <30>; > + samsung,syscon-phandle = <&pmu_system_controller>; > + samsung,cluster-index = <0>; > + }; > + > + watchdog_cl1: watchdog@10070000 { > + compatible = "google,gs101-wdt"; > + reg = <0x0 0x10070000 0x100>; > + interrupts = <GIC_SPI IRQ_WDT_CLUSTER1_MISC IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1>, <&ext_24_5m>; > + clock-names = "watchdog", "watchdog_src"; > + timeout-sec = <30>; > + samsung,syscon-phandle = <&pmu_system_controller>; > + samsung,cluster-index = <1>; > + status = "disabled"; > + }; > + > + cmu_top: clock-controller@1e080000 { > + compatible = "google,gs101-cmu-top"; > + reg = <0x0 0x1e080000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>; > + clock-names = "oscclk"; > + }; > + > + cmu_apm: clock-controller@17400000 { > + compatible = "google,gs101-cmu-apm"; > + reg = <0x0 0x17400000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>; > + clock-names = "oscclk"; > + }; > + > + cmu_misc: clock-controller@10010000 { > + compatible = "google,gs101-cmu-misc"; > + reg = <0x0 0x10010000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>; > + clock-names = "oscclk", "dout_cmu_misc_bus"; > + }; > + > + dsu-pmu-0 { > + compatible = "arm,dsu-pmu"; > + interrupts = <GIC_SPI IRQ_CPUCL0_CLUSTERPMUIRQ_CPUCL0 IRQ_TYPE_LEVEL_HIGH>; > + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; > + }; > + > + gpio_keys: gpio_keys { > + compatible = "gpio-keys"; > + }; > + > +}; > -- > 2.42.0.582.g8ccd20d70d-goog >
On Thu, Oct 05, 2023 at 10:59:12AM -0700, William McVicker wrote: > On 10/05/2023, Peter Griffin wrote: > > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, > > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile > > phones. It features: > > * 4xA55 little cluster > > * 2xA76 Mid cluster > > * 2xX1 Big cluster > > > > This commit adds the basic device tree for gs101 (SoC) and oriole > > (pixel 6). Further platform support will be added over time. > > > > It has been tested with a minimal busybox initramfs and boots to > > a shell. > > > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > > --- > > arch/arm64/Kconfig.platforms | 6 + > > arch/arm64/boot/dts/Makefile | 1 + > > arch/arm64/boot/dts/google/Makefile | 6 + > > arch/arm64/boot/dts/google/gs101-oriole.dts | 68 + > > arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1134 +++++++++++++++++ > > arch/arm64/boot/dts/google/gs101-pinctrl.h | 17 + > > arch/arm64/boot/dts/google/gs101.dtsi | 501 ++++++++ > > 7 files changed, 1733 insertions(+) > > create mode 100644 arch/arm64/boot/dts/google/Makefile > > create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts > > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h > > create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi > > > > diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms > > index 6069120199bb..a5ed1b719488 100644 > > --- a/arch/arm64/Kconfig.platforms > > +++ b/arch/arm64/Kconfig.platforms > > @@ -107,6 +107,12 @@ config ARCH_EXYNOS > > help > > This enables support for ARMv8 based Samsung Exynos SoC family. > > > > +config ARCH_GOOGLE_TENSOR > > + bool "Google Tensor SoC fmaily" > > + depends on ARCH_EXYNOS > > + help > > + Support for ARMv8 based Google Tensor platforms. > > I'd like to bring up this thread and discuss the option of not introducing > another ARCH_* config: > > https://lore.kernel.org/all/20200306103652.GA3634389@kroah.com/ I agree, PLEASE don't add platform config options as that makes it impossible to make a unified kernel image that works for more than one platform at the same time. > I especially don't like the "depends on ARCH_EXYNOS" because that forces one to > include all the other Exynos drivers that ARCH_EXYNOS selects that Google > Tensor SoCs don't need. Can we consider using SOC_GOOGLE instead and for all > drivers that actually depend on the SoC hardware, we can just add "depends on > SOC_GOOGLE"? Why do any of this at all? It should not be needed. > The idea is that drivers should be tied to hardware -- not a specific vendor. And drivers should be auto-loaded. All of these drivers are not vendor-specific at all, they are based on the same IP blocks as others, so that is how they should be unified. > By making drivers depend on ARCH_*, you are introducing an arbitrary vendor > dependency and not a hardware dependency. Totally agree, thanks for bringing this up. greg k-h
On 05/10/2023 20:05, Greg KH wrote: > On Thu, Oct 05, 2023 at 10:59:12AM -0700, William McVicker wrote: >> On 10/05/2023, Peter Griffin wrote: >>> Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, >>> (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile >>> phones. It features: >>> * 4xA55 little cluster >>> * 2xA76 Mid cluster >>> * 2xX1 Big cluster >>> >>> This commit adds the basic device tree for gs101 (SoC) and oriole >>> (pixel 6). Further platform support will be added over time. >>> >>> It has been tested with a minimal busybox initramfs and boots to >>> a shell. >>> >>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> >>> --- >>> arch/arm64/Kconfig.platforms | 6 + >>> arch/arm64/boot/dts/Makefile | 1 + >>> arch/arm64/boot/dts/google/Makefile | 6 + >>> arch/arm64/boot/dts/google/gs101-oriole.dts | 68 + >>> arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1134 +++++++++++++++++ >>> arch/arm64/boot/dts/google/gs101-pinctrl.h | 17 + >>> arch/arm64/boot/dts/google/gs101.dtsi | 501 ++++++++ >>> 7 files changed, 1733 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/google/Makefile >>> create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts >>> create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi >>> create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h >>> create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi >>> >>> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms >>> index 6069120199bb..a5ed1b719488 100644 >>> --- a/arch/arm64/Kconfig.platforms >>> +++ b/arch/arm64/Kconfig.platforms >>> @@ -107,6 +107,12 @@ config ARCH_EXYNOS >>> help >>> This enables support for ARMv8 based Samsung Exynos SoC family. >>> >>> +config ARCH_GOOGLE_TENSOR >>> + bool "Google Tensor SoC fmaily" >>> + depends on ARCH_EXYNOS >>> + help >>> + Support for ARMv8 based Google Tensor platforms. >> >> I'd like to bring up this thread and discuss the option of not introducing >> another ARCH_* config: >> >> https://lore.kernel.org/all/20200306103652.GA3634389@kroah.com/ > > I agree, PLEASE don't add platform config options as that makes it > impossible to make a unified kernel image that works for more than one > platform at the same time. There is no single problem in making unified image as we were doing since beginning of ARM64. The ARCH_* is not a obstacle for this. > >> I especially don't like the "depends on ARCH_EXYNOS" because that forces one to >> include all the other Exynos drivers that ARCH_EXYNOS selects that Google >> Tensor SoCs don't need. Can we consider using SOC_GOOGLE instead and for all >> drivers that actually depend on the SoC hardware, we can just add "depends on >> SOC_GOOGLE"? > > Why do any of this at all? It should not be needed. > >> The idea is that drivers should be tied to hardware -- not a specific vendor. > > And drivers should be auto-loaded. > > All of these drivers are not vendor-specific at all, they are based on > the same IP blocks as others, so that is how they should be unified. They are vendor specific. All of them are specifically for Exynos hardwre, because this is Exynos. We call it Google GS/Tensor SoC just for fancy convenience, but this just Exynos. > >> By making drivers depend on ARCH_*, you are introducing an arbitrary vendor >> dependency and not a hardware dependency. > > Totally agree, thanks for bringing this up. > Best regards, Krzysztof
On 05/10/2023 19:59, William McVicker wrote: > On 10/05/2023, Peter Griffin wrote: >> Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, >> (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile >> phones. It features: >> * 4xA55 little cluster >> * 2xA76 Mid cluster >> * 2xX1 Big cluster >> >> This commit adds the basic device tree for gs101 (SoC) and oriole >> (pixel 6). Further platform support will be added over time. >> >> It has been tested with a minimal busybox initramfs and boots to >> a shell. >> >> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> >> --- >> arch/arm64/Kconfig.platforms | 6 + >> arch/arm64/boot/dts/Makefile | 1 + >> arch/arm64/boot/dts/google/Makefile | 6 + >> arch/arm64/boot/dts/google/gs101-oriole.dts | 68 + >> arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1134 +++++++++++++++++ >> arch/arm64/boot/dts/google/gs101-pinctrl.h | 17 + >> arch/arm64/boot/dts/google/gs101.dtsi | 501 ++++++++ >> 7 files changed, 1733 insertions(+) >> create mode 100644 arch/arm64/boot/dts/google/Makefile >> create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts >> create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi >> create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h >> create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi >> >> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms >> index 6069120199bb..a5ed1b719488 100644 >> --- a/arch/arm64/Kconfig.platforms >> +++ b/arch/arm64/Kconfig.platforms >> @@ -107,6 +107,12 @@ config ARCH_EXYNOS >> help >> This enables support for ARMv8 based Samsung Exynos SoC family. >> >> +config ARCH_GOOGLE_TENSOR >> + bool "Google Tensor SoC fmaily" >> + depends on ARCH_EXYNOS >> + help >> + Support for ARMv8 based Google Tensor platforms. > > I'd like to bring up this thread and discuss the option of not introducing > another ARCH_* config: > > https://lore.kernel.org/all/20200306103652.GA3634389@kroah.com/ > > I especially don't like the "depends on ARCH_EXYNOS" because that forces one to > include all the other Exynos drivers that ARCH_EXYNOS selects that Google Since we are creating unified kernel images, having other drivers is not a problem. > Tensor SoCs don't need. Can we consider using SOC_GOOGLE instead and for all SOC_GOOGLE will work exactly the same and depend on ARCH_EXYNOS or appear everywhere as ARCH_EXYNOS. We already had this talk with Tesla. > drivers that actually depend on the SoC hardware, we can just add "depends on > SOC_GOOGLE"? > > The idea is that drivers should be tied to hardware -- not a specific vendor. And hardware is Exynos. Tesla FSD and Google Tensor is Exynos, even if you do no like calling it. > By making drivers depend on ARCH_*, you are introducing an arbitrary vendor > dependency and not a hardware dependency. There is no arbitrary dependency. We call it all Exynos hardware, because this is Exynos. I remember what you were pushing for removal of ARCH_EXYNOS and there waas clear feedback, not only from me: this is against communities goals. > > Thanks, > Will Please trim the replies from unrelated context. Best regards, Krzysztof
On 05/10/2023 19:59, William McVicker wrote: > On 10/05/2023, Peter Griffin wrote: >> Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, >> (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile >> phones. It features: >> * 4xA55 little cluster >> * 2xA76 Mid cluster >> * 2xX1 Big cluster >> >> This commit adds the basic device tree for gs101 (SoC) and oriole >> (pixel 6). Further platform support will be added over time. >> >> It has been tested with a minimal busybox initramfs and boots to >> a shell. >> William, Please do not Cc non-existing mailboxes. You added Cc kernel-team and we all got awesome bounces now: "We're writing to let you know that the group you tried to contact (kernel-team) may not exist, or you may not have permission to post messages to the group. A few more details on why you weren't able to post:" Best regards, Krzysztof
On Thu, Oct 05, 2023 at 09:18:48PM +0200, Krzysztof Kozlowski wrote: > >> I'd like to bring up this thread and discuss the option of not introducing > >> another ARCH_* config: > >> > >> https://lore.kernel.org/all/20200306103652.GA3634389@kroah.com/ > > > > I agree, PLEASE don't add platform config options as that makes it > > impossible to make a unified kernel image that works for more than one > > platform at the same time. > > There is no single problem in making unified image as we were doing > since beginning of ARM64. The ARCH_* is not a obstacle for this. Then why are the ARCH_* options needed at all? What does this help out with? > >> I especially don't like the "depends on ARCH_EXYNOS" because that forces one to > >> include all the other Exynos drivers that ARCH_EXYNOS selects that Google > >> Tensor SoCs don't need. Can we consider using SOC_GOOGLE instead and for all > >> drivers that actually depend on the SoC hardware, we can just add "depends on > >> SOC_GOOGLE"? > > > > Why do any of this at all? It should not be needed. > > > >> The idea is that drivers should be tied to hardware -- not a specific vendor. > > > > And drivers should be auto-loaded. > > > > All of these drivers are not vendor-specific at all, they are based on > > the same IP blocks as others, so that is how they should be unified. > > They are vendor specific. All of them are specifically for Exynos > hardwre, because this is Exynos. We call it Google GS/Tensor SoC just > for fancy convenience, but this just Exynos. Ok, then why is this ARCH_ option needed if these IP blocks really are from something else and are part of other drivers? confused, greg k-h
On 10/05/2023, Krzysztof Kozlowski wrote: > On 05/10/2023 19:59, William McVicker wrote: > > On 10/05/2023, Peter Griffin wrote: > >> Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, > >> (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile > >> phones. It features: > >> * 4xA55 little cluster > >> * 2xA76 Mid cluster > >> * 2xX1 Big cluster > >> > >> This commit adds the basic device tree for gs101 (SoC) and oriole > >> (pixel 6). Further platform support will be added over time. > >> > >> It has been tested with a minimal busybox initramfs and boots to > >> a shell. > >> > > William, > > Please do not Cc non-existing mailboxes. You added Cc kernel-team and we > all got awesome bounces now: > > "We're writing to let you know that the group you tried to contact > (kernel-team) may not exist, or you may not have permission to post > messages to the group. A few more details on why you weren't able to post:" > > Best regards, > Krzysztof > Sorry, I mistyped the email. Should have been kernel-team@android.com. Regards, Will
On 05/10/2023 21:23, Greg KH wrote: > On Thu, Oct 05, 2023 at 09:18:48PM +0200, Krzysztof Kozlowski wrote: >>>> I'd like to bring up this thread and discuss the option of not introducing >>>> another ARCH_* config: >>>> >>>> https://lore.kernel.org/all/20200306103652.GA3634389@kroah.com/ >>> >>> I agree, PLEASE don't add platform config options as that makes it >>> impossible to make a unified kernel image that works for more than one >>> platform at the same time. >> >> There is no single problem in making unified image as we were doing >> since beginning of ARM64. The ARCH_* is not a obstacle for this. > > Then why are the ARCH_* options needed at all? What does this help out > with? It helps all the people and distros who do not want to build/package drivers or modules for unrelated hardware or architectures. Let's take Samsung Exynos UART driver. It will never, 100% never, work on x86, x86_64. There is no single need to package it for kernels build for these products. It will not work on nVidia Tegra ARM64, Qualcomm ARM64 SoC, so if you do not want to run on Exynos, then you do no select ARCH_EXYNOS and have significantly smaller image. Now, there is no problem to have one kernel for nVidia Tegra + Qualcomm + Samsung Exynos with everything you need. The ARCH_EXYNOS or SOC_EXYNOS or SOC_GOOGLE serves only the purpose to allow distros and people customize build for specific hardware. It does not limit anyone on anything. > >>>> I especially don't like the "depends on ARCH_EXYNOS" because that forces one to >>>> include all the other Exynos drivers that ARCH_EXYNOS selects that Google >>>> Tensor SoCs don't need. Can we consider using SOC_GOOGLE instead and for all >>>> drivers that actually depend on the SoC hardware, we can just add "depends on >>>> SOC_GOOGLE"? >>> >>> Why do any of this at all? It should not be needed. >>> >>>> The idea is that drivers should be tied to hardware -- not a specific vendor. >>> >>> And drivers should be auto-loaded. >>> >>> All of these drivers are not vendor-specific at all, they are based on >>> the same IP blocks as others, so that is how they should be unified. >> >> They are vendor specific. All of them are specifically for Exynos >> hardwre, because this is Exynos. We call it Google GS/Tensor SoC just >> for fancy convenience, but this just Exynos. > > Ok, then why is this ARCH_ option needed if these IP blocks really are > from something else and are part of other drivers? For the same reason above, because if I want to build kernel for Qualcomm, I want to drop easily anything not related. If I want to build kernel without I2C, I disable I2C bus which effectively disables all drivers which work on I2C. If I want to build kernel without Exynos, I disable ARCH_EXYNOS which effectively disables entire Exynos hardware. Think of SoC as a bus or interface. Best regards, Krzysztof
On 10/05/2023, Krzysztof Kozlowski wrote: > On 05/10/2023 21:23, Greg KH wrote: > > On Thu, Oct 05, 2023 at 09:18:48PM +0200, Krzysztof Kozlowski wrote: > >>>> I'd like to bring up this thread and discuss the option of not introducing > >>>> another ARCH_* config: > >>>> > >>>> https://lore.kernel.org/all/20200306103652.GA3634389@kroah.com/ > >>> > >>> I agree, PLEASE don't add platform config options as that makes it > >>> impossible to make a unified kernel image that works for more than one > >>> platform at the same time. > >> > >> There is no single problem in making unified image as we were doing > >> since beginning of ARM64. The ARCH_* is not a obstacle for this. > > > > Then why are the ARCH_* options needed at all? What does this help out > > with? > > It helps all the people and distros who do not want to build/package > drivers or modules for unrelated hardware or architectures. > > Let's take Samsung Exynos UART driver. It will never, 100% never, work > on x86, x86_64. There is no single need to package it for kernels build > for these products. It will not work on nVidia Tegra ARM64, Qualcomm > ARM64 SoC, so if you do not want to run on Exynos, then you do no select > ARCH_EXYNOS and have significantly smaller image. > > Now, there is no problem to have one kernel for nVidia Tegra + Qualcomm > + Samsung Exynos with everything you need. The ARCH_EXYNOS or SOC_EXYNOS > or SOC_GOOGLE serves only the purpose to allow distros and people > customize build for specific hardware. > > It does not limit anyone on anything. I'm glad you brought up Exynos UART because this is where one of the limitations is introduced. For example, if you want to modularize out all the vendor specific drivers from the core kernel to create a common arm64 kernel binary that works on all ARM64 devices, you will not be able to build in the early console UART drivers without enabling the respective ARCH_* configs. Being able to include SERIAL_SAMSUNG and SERIAL_MSM without all the vendor specific drivers that ARCH_EXYNOS and ARCH_QCOM select is very valuable for debugging early boot issues. I understand that ARCH_* configs are used to selectively pick which device tree blobs are built, but forcing developers to pick all or nothing is where I have a problem. Regards, Will > > > > > > >>>> I especially don't like the "depends on ARCH_EXYNOS" because that forces one to > >>>> include all the other Exynos drivers that ARCH_EXYNOS selects that Google > >>>> Tensor SoCs don't need. Can we consider using SOC_GOOGLE instead and for all > >>>> drivers that actually depend on the SoC hardware, we can just add "depends on > >>>> SOC_GOOGLE"? > >>> > >>> Why do any of this at all? It should not be needed. > >>> > >>>> The idea is that drivers should be tied to hardware -- not a specific vendor. > >>> > >>> And drivers should be auto-loaded. > >>> > >>> All of these drivers are not vendor-specific at all, they are based on > >>> the same IP blocks as others, so that is how they should be unified. > >> > >> They are vendor specific. All of them are specifically for Exynos > >> hardwre, because this is Exynos. We call it Google GS/Tensor SoC just > >> for fancy convenience, but this just Exynos. > > > > Ok, then why is this ARCH_ option needed if these IP blocks really are > > from something else and are part of other drivers? > > For the same reason above, because if I want to build kernel for > Qualcomm, I want to drop easily anything not related. If I want to build > kernel without I2C, I disable I2C bus which effectively disables all > drivers which work on I2C. If I want to build kernel without Exynos, I > disable ARCH_EXYNOS which effectively disables entire Exynos hardware. > > Think of SoC as a bus or interface. > > Best regards, > Krzysztof >
On 06/10/2023 01:19, William McVicker wrote: > On 10/05/2023, Krzysztof Kozlowski wrote: >> On 05/10/2023 21:23, Greg KH wrote: >>> On Thu, Oct 05, 2023 at 09:18:48PM +0200, Krzysztof Kozlowski wrote: >>>>>> I'd like to bring up this thread and discuss the option of not introducing >>>>>> another ARCH_* config: >>>>>> >>>>>> https://lore.kernel.org/all/20200306103652.GA3634389@kroah.com/ >>>>> >>>>> I agree, PLEASE don't add platform config options as that makes it >>>>> impossible to make a unified kernel image that works for more than one >>>>> platform at the same time. >>>> >>>> There is no single problem in making unified image as we were doing >>>> since beginning of ARM64. The ARCH_* is not a obstacle for this. >>> >>> Then why are the ARCH_* options needed at all? What does this help out >>> with? >> >> It helps all the people and distros who do not want to build/package >> drivers or modules for unrelated hardware or architectures. >> >> Let's take Samsung Exynos UART driver. It will never, 100% never, work >> on x86, x86_64. There is no single need to package it for kernels build >> for these products. It will not work on nVidia Tegra ARM64, Qualcomm >> ARM64 SoC, so if you do not want to run on Exynos, then you do no select >> ARCH_EXYNOS and have significantly smaller image. >> >> Now, there is no problem to have one kernel for nVidia Tegra + Qualcomm >> + Samsung Exynos with everything you need. The ARCH_EXYNOS or SOC_EXYNOS >> or SOC_GOOGLE serves only the purpose to allow distros and people >> customize build for specific hardware. >> >> It does not limit anyone on anything. > > I'm glad you brought up Exynos UART because this is where one of the > limitations is introduced. For example, if you want to modularize out all the > vendor specific drivers from the core kernel to create a common arm64 kernel > binary that works on all ARM64 devices, you will not be able to build in the > early console UART drivers without enabling the respective ARCH_* configs. When you build single kernel there is never need to NOT ENABLE respective ARCH configs. Please describe me upstream case for such need to NOT ENABLE. > Being able to include SERIAL_SAMSUNG and SERIAL_MSM without all the vendor> specific drivers that ARCH_EXYNOS and ARCH_QCOM select is very valuable for > debugging early boot issues. Really? How related? The drivers are independent. You describe some out-of-tree development process which we never needed for upstream work. And we did here quite a lot of upstream, specially if you look at ARCH_QCOM. > > I understand that ARCH_* configs are used to selectively pick which device tree > blobs are built, but forcing developers to pick all or nothing is where I have > a problem. No one forces you to pick up everything or nothing. You select ARCH_EXYNOS and still can drop all optional drivers. It's true you cannot drop mandatory drivers, but you are upstreaming Exynos platform, right? We do not talk about your out-of-tree Google work because it does not matter. Best regards, Krzysztof
On Fri, Oct 6, 2023, at 08:06, Krzysztof Kozlowski wrote: > On 06/10/2023 01:19, William McVicker wrote: >> On 10/05/2023, Krzysztof Kozlowski wrote: >>> On 05/10/2023 21:23, Greg KH wrote: >> >> Being able to include SERIAL_SAMSUNG and SERIAL_MSM without all the vendor> specific drivers that ARCH_EXYNOS and ARCH_QCOM select is very > valuable for >> debugging early boot issues. > > Really? How related? The drivers are independent. You describe some > out-of-tree development process which we never needed for upstream work. > And we did here quite a lot of upstream, specially if you look at ARCH_QCOM. Right: in general, all drivers are independent of the platform besides the typical 'depends on ARCH_FOO || COMPILE_TEST' dependency, but I think it's worth mentioning the known exceptions, so Greg and Will can take that fight to the respective places rather than discussing it in the platform submission: - Some subsystems are considered 'special' and the maintainers prefer the drivers to be automatically selected based on the ARCH_* settings instead of having user-visible options. This is traditionally true for large chunks of drivers/irqchip, drivers/clocksource and drivers/pinctrl, though it has gotten better over time on all of them. - Some older 32-bit platforms are still not as modular as we'd like them to be, especially the StrongARM (ARMv4) platforms that require a custom kernel build, and some of ARMv4T and ARMv5 boards that are still missing DT support. These tend to require drivers they directly link to from board code, so disabling the drivers would cause a link failure until this gets cleaned up. - A couple of drivers are force-enabled based on the ARCH_* options because booting without these drivers would risk permanent damage to hardware, e.g. in overtemp or overcurrent scenarios. - ACPI based platforms require the PCI host bridge driver to be built-in rather than a loadable module because ACPI needs to probe PCI devices during early boot. - Some subsystems (notably drivers/gpu/, but others as well) have an excessive number of 'select' statements, so you end up surprise-enabling a number of additional drivers and subsystems by enabling certain less important platform specific drivers. Arnd
On 10/06/2023, Arnd Bergmann wrote: > On Fri, Oct 6, 2023, at 08:06, Krzysztof Kozlowski wrote: > > On 06/10/2023 01:19, William McVicker wrote: > >> On 10/05/2023, Krzysztof Kozlowski wrote: > >>> On 05/10/2023 21:23, Greg KH wrote: > >> > >> Being able to include SERIAL_SAMSUNG and SERIAL_MSM without all the vendor> specific drivers that ARCH_EXYNOS and ARCH_QCOM select is very > > valuable for > >> debugging early boot issues. > > > > Really? How related? The drivers are independent. You describe some > > out-of-tree development process which we never needed for upstream work. > > And we did here quite a lot of upstream, specially if you look at ARCH_QCOM. > > Right: in general, all drivers are independent of the platform > besides the typical 'depends on ARCH_FOO || COMPILE_TEST' dependency, > but I think it's worth mentioning the known exceptions, so Greg and > Will can take that fight to the respective places rather than > discussing it in the platform submission: > > - Some subsystems are considered 'special' and the maintainers > prefer the drivers to be automatically selected based on the > ARCH_* settings instead of having user-visible options. This is > traditionally true for large chunks of drivers/irqchip, > drivers/clocksource and drivers/pinctrl, though it has gotten > better over time on all of them. > > - Some older 32-bit platforms are still not as modular as we'd > like them to be, especially the StrongARM (ARMv4) platforms that > require a custom kernel build, and some of ARMv4T and ARMv5 > boards that are still missing DT support. These tend to require > drivers they directly link to from board code, so disabling > the drivers would cause a link failure until this gets > cleaned up. > > - A couple of drivers are force-enabled based on the ARCH_* > options because booting without these drivers would risk > permanent damage to hardware, e.g. in overtemp or overcurrent > scenarios. > > - ACPI based platforms require the PCI host bridge driver to > be built-in rather than a loadable module because ACPI > needs to probe PCI devices during early boot. > > - Some subsystems (notably drivers/gpu/, but others as well) > have an excessive number of 'select' statements, so you > end up surprise-enabling a number of additional drivers > and subsystems by enabling certain less important platform > specific drivers. > > Arnd So if the argument is that the existing upstream Exynos platforms are required to have these drivers built-in to the kernel to boot: COMMON_CLK_SAMSUNG CLKSRC_EXYNOS_MCT EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS EXYNOS_PMU PINCTRL PINCTRL_EXYNOS PM_GENERIC_DOMAINS if PM SOC_SAMSUNG ...then that is understandable and we can work to fix that. My last question then is -- why do we need a new ARCH_GOOGLE_TENSOR config in the platform Kconfig? For example, I don't really like this: diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig index 76a494e95027..4c8f173c4dec 100644 --- a/drivers/clk/samsung/Kconfig +++ b/drivers/clk/samsung/Kconfig @@ -13,6 +13,7 @@ config COMMON_CLK_SAMSUNG select EXYNOS_5420_COMMON_CLK if ARM && SOC_EXYNOS5420 select EXYNOS_ARM64_COMMON_CLK if ARM64 && ARCH_EXYNOS select TESLA_FSD_COMMON_CLK if ARM64 && ARCH_TESLA_FSD + select GOOGLE_GS101_COMMON_CLK if ARM64 && ARCH_GOOGLE_TENSOR What happens when we have GOOGLE_GS101_COMMON_CLK, GOOGLE_GS201_COMMON_CLK, and so on? How are we going to pick the right driver when we have a generic ARCH_GOOGLE_TENSOR config? Ideally, we should have one Exynos clock driver that can detect what hardware is running (using the DT) to determine what it needs to do. If you really want to compile out the other vendor's clock drivers using some configs, then we should do that with SOC_GS101, SOC_GS201, SOC_TESLA_FSD configs (not ideal though). With that approach, we could drop the platform ARCH_GOOGLE_TENSOR config and create an SOC_GS101 config that can be used for things like the COMMON_CLK_SAMSUNG driver (for now) and building the GS101 dtb. Let me know your thoughts. Thanks, Will
On 06/10/2023 18:33, William McVicker wrote: > On 10/06/2023, Arnd Bergmann wrote: >> On Fri, Oct 6, 2023, at 08:06, Krzysztof Kozlowski wrote: >>> On 06/10/2023 01:19, William McVicker wrote: >>>> On 10/05/2023, Krzysztof Kozlowski wrote: >>>>> On 05/10/2023 21:23, Greg KH wrote: >>>> >>>> Being able to include SERIAL_SAMSUNG and SERIAL_MSM without all the vendor> specific drivers that ARCH_EXYNOS and ARCH_QCOM select is very >>> valuable for >>>> debugging early boot issues. >>> >>> Really? How related? The drivers are independent. You describe some >>> out-of-tree development process which we never needed for upstream work. >>> And we did here quite a lot of upstream, specially if you look at ARCH_QCOM. >> >> Right: in general, all drivers are independent of the platform >> besides the typical 'depends on ARCH_FOO || COMPILE_TEST' dependency, >> but I think it's worth mentioning the known exceptions, so Greg and >> Will can take that fight to the respective places rather than >> discussing it in the platform submission: >> >> - Some subsystems are considered 'special' and the maintainers >> prefer the drivers to be automatically selected based on the >> ARCH_* settings instead of having user-visible options. This is >> traditionally true for large chunks of drivers/irqchip, >> drivers/clocksource and drivers/pinctrl, though it has gotten >> better over time on all of them. >> >> - Some older 32-bit platforms are still not as modular as we'd >> like them to be, especially the StrongARM (ARMv4) platforms that >> require a custom kernel build, and some of ARMv4T and ARMv5 >> boards that are still missing DT support. These tend to require >> drivers they directly link to from board code, so disabling >> the drivers would cause a link failure until this gets >> cleaned up. >> >> - A couple of drivers are force-enabled based on the ARCH_* >> options because booting without these drivers would risk >> permanent damage to hardware, e.g. in overtemp or overcurrent >> scenarios. >> >> - ACPI based platforms require the PCI host bridge driver to >> be built-in rather than a loadable module because ACPI >> needs to probe PCI devices during early boot. >> >> - Some subsystems (notably drivers/gpu/, but others as well) >> have an excessive number of 'select' statements, so you >> end up surprise-enabling a number of additional drivers >> and subsystems by enabling certain less important platform >> specific drivers. >> >> Arnd > > So if the argument is that the existing upstream Exynos platforms are required > to have these drivers built-in to the kernel to boot: > COMMON_CLK_SAMSUNG > CLKSRC_EXYNOS_MCT > EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS > EXYNOS_PMU > PINCTRL > PINCTRL_EXYNOS > PM_GENERIC_DOMAINS if PM > SOC_SAMSUNG > > ...then that is understandable and we can work to fix that. > > My last question then is -- why do we need a new ARCH_GOOGLE_TENSOR config in > the platform Kconfig? For example, I don't really like this: > > diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig > index 76a494e95027..4c8f173c4dec 100644 > --- a/drivers/clk/samsung/Kconfig > +++ b/drivers/clk/samsung/Kconfig > @@ -13,6 +13,7 @@ config COMMON_CLK_SAMSUNG > select EXYNOS_5420_COMMON_CLK if ARM && SOC_EXYNOS5420 > select EXYNOS_ARM64_COMMON_CLK if ARM64 && ARCH_EXYNOS > select TESLA_FSD_COMMON_CLK if ARM64 && ARCH_TESLA_FSD > + select GOOGLE_GS101_COMMON_CLK if ARM64 && ARCH_GOOGLE_TENSOR > > What happens when we have GOOGLE_GS101_COMMON_CLK, GOOGLE_GS201_COMMON_CLK, and > so on? Nothing happens... or happens anything you wish. Did you read the motivation why this was created like this? > How are we going to pick the right driver when e have a generic > ARCH_GOOGLE_TENSOR config? You do not have to pick. You select ARCH_GOOGLE_TENSOR and proper pick is done by you. Nothing to do more. > Ideally, we should have one Exynos clock driver that > can detect what hardware is running (using the DT) to determine what it needs It's already like this. We're done. > to do. If you really want to compile out the other vendor's clock drivers using > some configs, then we should do that with SOC_GS101, SOC_GS201, SOC_TESLA_FSD Whether you call it SOC or ARCH it is the same. We organized it as ARCH. > configs (not ideal though). With that approach, we could drop the platform > ARCH_GOOGLE_TENSOR config and create an SOC_GS101 config that can be used for > things like the COMMON_CLK_SAMSUNG driver (for now) and building the GS101 dtb. There is no need for this. ARCH does exactly the same. Best regards, Krzysztof
Hi, Peter, On 10/5/23 16:56, Peter Griffin wrote: > + serial_0: serial@10a00000 { > + compatible = "samsung,exynos850-uart"; This deserves a SoC specific compatible so that any further quirks or incompatibilities can be easily addressed. Cheers, ta
On 10/07/2023, Krzysztof Kozlowski wrote: > On 06/10/2023 18:33, William McVicker wrote: > > On 10/06/2023, Arnd Bergmann wrote: > >> On Fri, Oct 6, 2023, at 08:06, Krzysztof Kozlowski wrote: > >>> On 06/10/2023 01:19, William McVicker wrote: > >>>> On 10/05/2023, Krzysztof Kozlowski wrote: > >>>>> On 05/10/2023 21:23, Greg KH wrote: > >>>> > >>>> Being able to include SERIAL_SAMSUNG and SERIAL_MSM without all the vendor> specific drivers that ARCH_EXYNOS and ARCH_QCOM select is very > >>> valuable for > >>>> debugging early boot issues. > >>> > >>> Really? How related? The drivers are independent. You describe some > >>> out-of-tree development process which we never needed for upstream work. > >>> And we did here quite a lot of upstream, specially if you look at ARCH_QCOM. > >> > >> Right: in general, all drivers are independent of the platform > >> besides the typical 'depends on ARCH_FOO || COMPILE_TEST' dependency, > >> but I think it's worth mentioning the known exceptions, so Greg and > >> Will can take that fight to the respective places rather than > >> discussing it in the platform submission: > >> > >> - Some subsystems are considered 'special' and the maintainers > >> prefer the drivers to be automatically selected based on the > >> ARCH_* settings instead of having user-visible options. This is > >> traditionally true for large chunks of drivers/irqchip, > >> drivers/clocksource and drivers/pinctrl, though it has gotten > >> better over time on all of them. > >> > >> - Some older 32-bit platforms are still not as modular as we'd > >> like them to be, especially the StrongARM (ARMv4) platforms that > >> require a custom kernel build, and some of ARMv4T and ARMv5 > >> boards that are still missing DT support. These tend to require > >> drivers they directly link to from board code, so disabling > >> the drivers would cause a link failure until this gets > >> cleaned up. > >> > >> - A couple of drivers are force-enabled based on the ARCH_* > >> options because booting without these drivers would risk > >> permanent damage to hardware, e.g. in overtemp or overcurrent > >> scenarios. > >> > >> - ACPI based platforms require the PCI host bridge driver to > >> be built-in rather than a loadable module because ACPI > >> needs to probe PCI devices during early boot. > >> > >> - Some subsystems (notably drivers/gpu/, but others as well) > >> have an excessive number of 'select' statements, so you > >> end up surprise-enabling a number of additional drivers > >> and subsystems by enabling certain less important platform > >> specific drivers. > >> > >> Arnd > > > > So if the argument is that the existing upstream Exynos platforms are required > > to have these drivers built-in to the kernel to boot: > > COMMON_CLK_SAMSUNG > > CLKSRC_EXYNOS_MCT > > EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS > > EXYNOS_PMU > > PINCTRL > > PINCTRL_EXYNOS > > PM_GENERIC_DOMAINS if PM > > SOC_SAMSUNG > > > > ...then that is understandable and we can work to fix that. > > > > My last question then is -- why do we need a new ARCH_GOOGLE_TENSOR config in > > the platform Kconfig? For example, I don't really like this: > > > > diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig > > index 76a494e95027..4c8f173c4dec 100644 > > --- a/drivers/clk/samsung/Kconfig > > +++ b/drivers/clk/samsung/Kconfig > > @@ -13,6 +13,7 @@ config COMMON_CLK_SAMSUNG > > select EXYNOS_5420_COMMON_CLK if ARM && SOC_EXYNOS5420 > > select EXYNOS_ARM64_COMMON_CLK if ARM64 && ARCH_EXYNOS > > select TESLA_FSD_COMMON_CLK if ARM64 && ARCH_TESLA_FSD > > + select GOOGLE_GS101_COMMON_CLK if ARM64 && ARCH_GOOGLE_TENSOR > > > > What happens when we have GOOGLE_GS101_COMMON_CLK, GOOGLE_GS201_COMMON_CLK, and > > so on? > > Nothing happens... or happens anything you wish. Did you read the > motivation why this was created like this? > > > > How are we going to pick the right driver when e have a generic > > ARCH_GOOGLE_TENSOR config? > Okay, we can figure that out the gs201 specifics when the time comes. > You do not have to pick. You select ARCH_GOOGLE_TENSOR and proper pick > is done by you. Nothing to do more. > > > Ideally, we should have one Exynos clock driver that > > can detect what hardware is running (using the DT) to determine what it needs > > It's already like this. We're done. > > > to do. If you really want to compile out the other vendor's clock drivers using > > some configs, then we should do that with SOC_GS101, SOC_GS201, SOC_TESLA_FSD > > Whether you call it SOC or ARCH it is the same. We organized it as ARCH. > > > configs (not ideal though). With that approach, we could drop the platform > > ARCH_GOOGLE_TENSOR config and create an SOC_GS101 config that can be used for > > things like the COMMON_CLK_SAMSUNG driver (for now) and building the GS101 dtb. > > There is no need for this. ARCH does exactly the same. Okay, sounds good. Thanks for the responses. Regards, Will > > Best regards, > Krzysztof >
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6069120199bb..a5ed1b719488 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -107,6 +107,12 @@ config ARCH_EXYNOS help This enables support for ARMv8 based Samsung Exynos SoC family. +config ARCH_GOOGLE_TENSOR + bool "Google Tensor SoC fmaily" + depends on ARCH_EXYNOS + help + Support for ARMv8 based Google Tensor platforms. + config ARCH_SPARX5 bool "Microchip Sparx5 SoC family" select PINCTRL diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 30dd6347a929..a4ee7b628114 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -13,6 +13,7 @@ subdir-y += broadcom subdir-y += cavium subdir-y += exynos subdir-y += freescale +subdir-y += google subdir-y += hisilicon subdir-y += intel subdir-y += lg diff --git a/arch/arm64/boot/dts/google/Makefile b/arch/arm64/boot/dts/google/Makefile new file mode 100644 index 000000000000..6d2026a767d4 --- /dev/null +++ b/arch/arm64/boot/dts/google/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 + +dtb-$(CONFIG_ARCH_GOOGLE_TENSOR) += \ + gs101-oriole.dtb \ + + diff --git a/arch/arm64/boot/dts/google/gs101-oriole.dts b/arch/arm64/boot/dts/google/gs101-oriole.dts new file mode 100644 index 000000000000..e531a39a76a4 --- /dev/null +++ b/arch/arm64/boot/dts/google/gs101-oriole.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Oriole DVT Device Tree + * + * Copyright 2021-2023 Google,LLC + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "gs101-pinctrl.h" +#include "gs101.dtsi" + +/ { + model = "Oriole DVT"; + compatible = "google,gs101-oriole", "google,gs101"; +}; + +&pinctrl_1 { + key_voldown: key-voldown-pins { + samsung,pins = "gpa7-3"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + key_volup: key-volup-pins { + samsung,pins = "gpa8-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&pinctrl_0 { + key_power: key-power-pins { + samsung,pins = "gpa10-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&gpio_keys { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&key_voldown &key_volup &key_power>; + button-vol-down { + label = "KEY_VOLUMEDOWN"; + linux,code = <114>; + gpios = <&gpa7 3 0xf>; + wakeup-source; + }; + button-vol-up { + label = "KEY_VOLUMEUP"; + linux,code = <115>; + gpios = <&gpa8 1 0xf>; + wakeup-source; + }; + button-power { + label = "KEY_POWER"; + linux,code = <116>; + gpios = <&gpa10 1 0xf>; + wakeup-source; + }; +}; diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi new file mode 100644 index 000000000000..24825205ede8 --- /dev/null +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi @@ -0,0 +1,1134 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GS101 SoC pin-mux and pin-config device tree source + * + * Copyright 2019-2023 Google LLC + * + */ + +#include <dt-bindings/interrupt-controller/gs101.h> +#include <arm64/exynos/exynos-pinctrl.h> +#include "gs101-pinctrl.h" + +/ { + /* GPIO_ALIVE */ + pinctrl@174d0000 { + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT0 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT1 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT2 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT3 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT4 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT5 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT6 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT7 ITLH>; + }; + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT8 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT9 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT10 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT11 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT12 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT13 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT14 ITLH>; + }; + gpa2: gpa2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT15 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT16 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT17 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT18 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT19 ITLH>; + }; + gpa3: gpa3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT20 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT21 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT22 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT23 ITLH>; + }; + gpa4: gpa4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT24 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT25 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT26 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT27 ITLH>; + }; + gpa5: gpa5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT28 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT29 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT30 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT31 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT32 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT33 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT34 ITLH>; + }; + gpa9: gpa9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT35 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT36 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT37 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT38 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT39 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT40 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT41 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT42 ITLH>; + }; + gpa10: gpa10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT43 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT44 ITLH>; + }; + + uart15_bus: uart15-bus-pins { + samsung,pins = "gpa2-3", "gpa2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + uart16_bus: uart16-bus-pins { + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart16_bus_rts: uart1-bus-rts-pins { + samsung,pins = "gpa3-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-val = <1>; + }; + + uart16_bus_tx_dat: uart1-bus-tx-dat-pins { + samsung,pins = "gpa3-1"; + samsung,pin-val = <1>; + }; + + uart16_bus_tx_con: uart1-bus-tx-con-pins { + samsung,pins = "gpa3-1"; + samsung,pin-function = <1>; + }; + + uart17_bus: uart17-bus-pins { + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + spi15_bus: spi15-bus-pins { + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi15_cs: spi15-cs-pins { + samsung,pins = "gpa4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + }; + /* GPIO_FAR_ALIVE */ + pinctrl@174e0000 { + gpa6: gpa6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT45 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT46 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT47 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT48 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT49 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT50 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT51 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT52 ITLH>; + }; + gpa7: gpa7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT53 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT54 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT55 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT56 ITLH>; + }; + gpa8: gpa8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT57 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT58 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT59 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT60 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT61 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT62 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT63 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT64 ITLH>; + }; + gpa11: gpa11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT65 ITLH>, + <GIC_SPI IRQ_ALIVE_EINT66 ITLH>; + }; + + }; + /* GPIO_GSACORE */ + pinctrl@17a80000 { + gps0: gps0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gps1: gps1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gps2: gps2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + /* GPIO_GSACTRL */ + pinctrl@17940000 { + gps3: gps3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + /* GPIO_HSI1 */ + pinctrl@11840000 { + gph0: gph0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gph1: gph1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + pcie0_clkreq: pcie0-clkreq-pins{ + samsung,pins = "gph0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <3>; + samsung,pin-pud-pdn = <3>; + }; + pcie0_perst: pcie0-perst-pins { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <3>; + }; + }; + /* GPIO_HSI2 */ + pinctrl@14440000 { + gph2: gph2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gph3: gph3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gph4: gph4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_cmd: sd2-cmd-pins { + samsung,pins = "gph4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_bus1: sd2-bus-width1-pins { + samsung,pins = "gph4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_bus4: sd2-bus-width4-pins { + samsung,pins = "gph4-3", "gph4-4", "gph4-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + }; + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gph3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-con-pdn = <3>; + samsung,pin-pud-pdn = <0>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gph3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-con-pdn = <3>; + samsung,pin-pud-pdn = <0>; + }; + pcie1_clkreq: pcie1-clkreq-pins { + samsung,pins = "gph2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <3>; + samsung,pin-pud-pdn = <3>; + }; + pcie1_perst: pcie1-perst-pins { + samsung,pins = "gph2-0"; + samsung,pin-function = <1>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <3>; + }; + }; + /* GPIO_PERIC0 */ + pinctrl@10840000 { + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp3: gpp3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp4: gpp4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp5: gpp5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp6: gpp6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp7: gpp7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp8: gpp8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp9: gpp9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp10: gpp10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp11: gpp11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp12: gpp12-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp13: gpp13-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp14: gpp14-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp15: gpp15-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp16: gpp16-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp17: gpp17-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp18: gpp18-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp19: gpp19-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + /* USI_PERIC0_UART_DBG */ + uart0_bus: uart0-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + disp_te_pri_on: disp-te-pri-on-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <0xf>; + }; + + disp_te_pri_off: disp-te-pri-off-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <0>; + }; + + disp_te_sec_on: disp-te-sec-on-pins { + samsung,pins = "gpp0-4"; + samsung,pin-function = <0xf>; + }; + + disp_te_sec_off: disp-te-sec-off-pins { + samsung,pins = "gpp0-4"; + samsung,pin-function = <0>; + }; + + sensor_mclk1_out: sensor-mclk1-out-pins { + samsung,pins = "gpp3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk1_fn: sensor-mclk1-fn-pins { + samsung,pins = "gpp3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk2_out: sensor-mclk2-out-pins { + samsung,pins = "gpp5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk2_fn: sensor-mclk2-fn-pins { + samsung,pins = "gpp5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk3_out: sensor-mclk3-out-pins { + samsung,pins = "gpp7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk3_fn: sensor-mclk3-fn-pins { + samsung,pins = "gpp7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk4_out: sensor-mclk4-out-pins { + samsung,pins = "gpp9-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk4_fn: sensor-mclk4-fn-pins { + samsung,pins = "gpp9-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk5_out: sensor-mclk5-out-pins { + samsung,pins = "gpp11-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk5_fn: sensor-mclk5-fn-pins { + samsung,pins = "gpp11-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk6_out: sensor-mclk6-out-pins { + samsung,pins = "gpp13-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk6_fn: sensor-mclk6-fn-pins { + samsung,pins = "gpp13-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk7_out: sensor-mclk7-out-pins { + samsung,pins = "gpp15-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk7_fn: sensor-mclk7-fn-pins { + samsung,pins = "gpp15-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk8_out: sensor-mclk8-out-pins { + samsung,pins = "gpp17-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + sensor_mclk8_fn: sensor-mclk8-fn-pins { + samsung,pins = "gpp17-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart14_bus_single: uart14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1", + "gpp18-2", "gpp18-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + spi14_bus: spi14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi14_cs: spi14-cs-pins { + samsung,pins = "gpp18-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi14_cs_func: spi14-cs-func-pins { + samsung,pins = "gpp18-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PDN_OUT0>; + }; + uart8_bus_single: uart8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2", + "gpp16-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp16-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp16-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart7_bus_single: uart7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1", + "gpp14-2", "gpp14-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp14-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp14-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart6_bus_single: uart6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", + "gpp12-2", "gpp12-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart5_bus_single: uart5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", + "gpp10-2", "gpp10-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp10-3"; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart4_bus_single: uart4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", + "gpp8-2", "gpp8-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart3_bus_single: uart3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1", + "gpp6-2", "gpp6-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart2_bus_single: uart2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", + "gpp4-2", "gpp4-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart1_bus_single: uart1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", + "gpp2-2", "gpp2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + }; + /* GPIO_PERIC1 */ + pinctrl@10c40000 { + gpp20: gpp20-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp21: gpp21-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp22: gpp22-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp23: gpp23-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp24: gpp24-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp25: gpp25-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp26: gpp26-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp27: gpp27-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart13_bus_single: uart13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1", + "gpp25-2", "gpp25-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + spi13_bus: spi13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi13_cs: spi13-cs-pins { + samsung,pins = "gpp25-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi13_cs_func: spi13-cs-func-pins { + samsung,pins = "gpp25-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart12_bus_single: uart12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5", + "gpp23-6", "gpp23-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + spi12_bus: spi12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi14_cs2: spi14-cs2-pins { + samsung,pins = "gpp23-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi12_cs: spi12-cs-pins { + samsung,pins = "gpp23-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi12_cs_func: spi12-cs-func-pins { + samsung,pins = "gpp23-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart11_bus_single: uart11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1", + "gpp23-2", "gpp23-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + spi11_bus: spi11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp23-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp23-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart10_bus_single: uart10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1", + "gpp21-2", "gpp21-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + spi10_bus: spi10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp21-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp21-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart9_bus_single: uart9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5", + "gpp20-6", "gpp20-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp20-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp20-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + uart0_bus_single: uart0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1", + "gpp20-2", "gpp20-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp20-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp20-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.h b/arch/arm64/boot/dts/google/gs101-pinctrl.h new file mode 100644 index 000000000000..acc77c684f0d --- /dev/null +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Pinctrl binding constants for GS101 + * + * Copyright (c) 2020-2023 Google, LLC. + */ + +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__ +#define __DT_BINDINGS_PINCTRL_GS101_H__ + +/* GS101 drive strengths */ +#define GS101_PIN_DRV_2_5_MA 0 +#define GS101_PIN_DRV_5_MA 1 +#define GS101_PIN_DRV_7_5_MA 2 +#define GS101_PIN_DRV_10_MA 3 + +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */ diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi new file mode 100644 index 000000000000..0bd43745f6fa --- /dev/null +++ b/arch/arm64/boot/dts/google/gs101.dtsi @@ -0,0 +1,501 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GS101 SoC + * + * Copyright 2019-2023 Google LLC + * + */ + +#include <dt-bindings/clock/gs101.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/gs101.h> + +#include "gs101-pinctrl.dtsi" + +/ { + compatible = "google,gs101"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <1>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + pinctrl4 = &pinctrl_4; + pinctrl5 = &pinctrl_5; + pinctrl6 = &pinctrl_6; + pinctrl7 = &pinctrl_7; + + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + }; + cluster2 { + core0 { + cpu = <&cpu6>; + }; + core1 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0000>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0100>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0200>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0300>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0400>; + enable-method = "psci"; + cpu-idle-states = <&ENYO_CPU_SLEEP>; + capacity-dmips-mhz = <620>; + dynamic-power-coefficient = <284>; + }; + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0500>; + enable-method = "psci"; + cpu-idle-states = <&ENYO_CPU_SLEEP>; + capacity-dmips-mhz = <620>; + dynamic-power-coefficient = <284>; + }; + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0600>; + enable-method = "psci"; + cpu-idle-states = <&HERA_CPU_SLEEP>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <650>; + }; + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0700>; + enable-method = "psci"; + cpu-idle-states = <&HERA_CPU_SLEEP>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <650>; + }; + + idle-states { + entry-method = "psci"; + + ANANKE_CPU_SLEEP: cpu-ananke-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <70>; + exit-latency-us = <160>; + min-residency-us = <2000>; + status = "okay"; + }; + + ENYO_CPU_SLEEP: cpu-enyo-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <150>; + exit-latency-us = <190>; + min-residency-us = <2500>; + status = "okay"; + }; + + HERA_CPU_SLEEP: cpu-hera-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <235>; + exit-latency-us = <220>; + min-residency-us = <3500>; + status = "okay"; + }; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + tpu_fw_reserved: tpu_fw@93000000 { + reg = <0x0 0x93000000 0x1000000>; + no-map; + }; + + gsa_reserved_protected: gsa@90200000 { + reg = <0x0 0x90200000 0x400000>; + no-map; + }; + + aoc_reserve: aoc@94000000 { + reg = <0x0 0x94000000 0x03000000>; + no-map; + }; + + abl_reserved: abl@f8800000 { + reg = <0x0 0xf8800000 0x02000000>; + no-map; + }; + + dss_log_reserved: dss_log_reserved@fd3f0000 { + reg = <0 0xfd3f0000 0x0000e000>; + no-map; + }; + + debug_kinfo_reserved: debug_kinfo_reserved@fd3fe000 { + reg = <0 0xfd3fe000 0x00001000>; + no-map; + }; + + bldr_log_reserved: bldr_log_reserved@fd800000 { + reg = <0 0xfd800000 0x00100000>; + no-map; + }; + + bldr_log_hist_reserved: bldr_log_hist_reserved@fd900000 { + reg = <0 0xfd900000 0x00002000>; + no-map; + }; + }; + + /* bootloader requires ect node */ + ect { + parameter_address = <0x90000000>; + parameter_size = <0x53000>; + }; + + chosen { + bootargs = "earlycon=exynos4210,mmio32,0x10A00000 clk_ignore_unused"; + }; + + gic: interrupt-controller@10400000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x10400000 0x10000>, /* GICD */ + <0x0 0x10440000 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24576000>; + }; + + ext_24_5m: ext_24_5m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + clock-output-names = "oscclk"; + }; + + ext_200m: ext_200m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "ext-200m"; + }; + + /* GPIO_ALIVE */ + pinctrl_0: pinctrl@174d0000 { + compatible = "google,gs101-pinctrl"; + reg = <0x00000000 0x174d0000 0x00001000>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT44 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-interrupt-controller { + compatible = "google,gs101-wakeup-eint"; + }; + }; + + /* GPIO_FAR_ALIVE */ + pinctrl_1: pinctrl@174e0000 { + compatible = "google,gs101-pinctrl"; + reg = <0x00000000 0x174e0000 0x00001000>; + interrupts = <GIC_SPI IRQ_ALIVE_EINT45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI IRQ_ALIVE_EINT66 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-interrupt-controller { + compatible = "google,gs101-wakeup-eint"; + }; + }; + + /* GPIO_GSACORE */ + pinctrl_2: pinctrl@17a80000 { + compatible = "google,gs101-pinctrl"; + reg = <0x00000000 0x17a80000 0x00001000>; + }; + /* GPIO_GSACTRL */ + pinctrl_3: pinctrl@17940000 { + compatible = "google,gs101-pinctrl"; + reg = <0x00000000 0x17940000 0x00001000>; + }; + /* GPIO_PERIC0 */ + pinctrl_4: pinctrl@10840000 { + compatible = "google,gs101-pinctrl"; + reg = <0x00000000 0x10840000 0x00001000>; + interrupts = <GIC_SPI IRQ_GPIO_PERIC0_PERIC0 IRQ_TYPE_LEVEL_HIGH>; + }; + /* GPIO_PERIC1 */ + pinctrl_5: pinctrl@10c40000 { + compatible = "google,gs101-pinctrl"; + reg = <0x00000000 0x10C40000 0x00001000>; + interrupts = <GIC_SPI IRQ_GPIO_PERIC1_PERIC1 IRQ_TYPE_LEVEL_HIGH>; + }; + /* GPIO_HSI1 */ + pinctrl_6: pinctrl@11840000 { + compatible = "google,gs101-pinctrl"; + reg = <0x00000000 0x11840000 0x00001000>; + interrupts = <GIC_SPI IRQ_GPIO_HSI1_HSI1 IRQ_TYPE_LEVEL_HIGH>; + }; + /* GPIO_HSI2 */ + pinctrl_7: pinctrl@14440000 { + compatible = "google,gs101-pinctrl"; + reg = <0x00000000 0x14440000 0x00001000>; + interrupts = <GIC_SPI IRQ_GPIO_HSI2_HSI2 IRQ_TYPE_LEVEL_HIGH>; + }; + + arm-pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + sysreg_apm: syscon@174204e0 { + compatible = "google,gs101-apm-sysreg", + "google,gs101-sysreg", "syscon"; + reg = <0x0 0x174204e0 0x1000>; + }; + + sysreg_peric0: syscon@10821000 { + compatible = "google,gs101-peric0-sysreg", + "google,gs101-sysreg", "syscon"; + reg = <0x0 0x10821000 0x40000>; + }; + + sysreg_peric1: syscon@10c21000 { + compatible = "google,gs101-peric1-sysreg", + "google,gs101-sysreg", "syscon"; + reg = <0x0 0x10C21000 0x40000>; + }; + + /* TODO replace with CCF clock */ + dummy_clk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12345>; + clock-output-names = "pclk"; + }; + + serial_0: serial@10a00000 { + compatible = "samsung,exynos850-uart"; + reg = <0x0 0x10a00000 0xc0>; + reg-io-width = <4>; + samsung,uart-fifosize = <256>; + interrupts = <GIC_SPI IRQ_USI0_UART_PERIC0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk 0>, <&dummy_clk 0>; + clock-names = "uart", "clk_uart_baud0"; + status = "okay"; + }; + + pmu_system_controller: system-controller@17460000 { + compatible = "google,gs101-pmu", "syscon"; + reg = <0x0 0x17460000 0x10000>; + }; + + watchdog_cl0: watchdog@10060000 { + compatible = "google,gs101-wdt"; + reg = <0x0 0x10060000 0x100>; + interrupts = <GIC_SPI IRQ_WDT_CLUSTER0_MISC IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0>, <&ext_24_5m>; + clock-names = "watchdog", "watchdog_src"; + timeout-sec = <30>; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <0>; + }; + + watchdog_cl1: watchdog@10070000 { + compatible = "google,gs101-wdt"; + reg = <0x0 0x10070000 0x100>; + interrupts = <GIC_SPI IRQ_WDT_CLUSTER1_MISC IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1>, <&ext_24_5m>; + clock-names = "watchdog", "watchdog_src"; + timeout-sec = <30>; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <1>; + status = "disabled"; + }; + + cmu_top: clock-controller@1e080000 { + compatible = "google,gs101-cmu-top"; + reg = <0x0 0x1e080000 0x8000>; + #clock-cells = <1>; + + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + + cmu_apm: clock-controller@17400000 { + compatible = "google,gs101-cmu-apm"; + reg = <0x0 0x17400000 0x8000>; + #clock-cells = <1>; + + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + + cmu_misc: clock-controller@10010000 { + compatible = "google,gs101-cmu-misc"; + reg = <0x0 0x10010000 0x8000>; + #clock-cells = <1>; + + clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>; + clock-names = "oscclk", "dout_cmu_misc_bus"; + }; + + dsu-pmu-0 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI IRQ_CPUCL0_CLUSTERPMUIRQ_CPUCL0 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + gpio_keys: gpio_keys { + compatible = "gpio-keys"; + }; + +};
Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile phones. It features: * 4xA55 little cluster * 2xA76 Mid cluster * 2xX1 Big cluster This commit adds the basic device tree for gs101 (SoC) and oriole (pixel 6). Further platform support will be added over time. It has been tested with a minimal busybox initramfs and boots to a shell. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- arch/arm64/Kconfig.platforms | 6 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/google/Makefile | 6 + arch/arm64/boot/dts/google/gs101-oriole.dts | 68 + arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1134 +++++++++++++++++ arch/arm64/boot/dts/google/gs101-pinctrl.h | 17 + arch/arm64/boot/dts/google/gs101.dtsi | 501 ++++++++ 7 files changed, 1733 insertions(+) create mode 100644 arch/arm64/boot/dts/google/Makefile create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi