| Message ID | 20231005105921.460657-1-mitrutzceclan@gmail.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | [v3,1/2] dt-bindings: adc: add AD7173 | expand |
On Thu, 5 Oct 2023 13:59:21 +0300 Dumitru Ceclan <mitrutzceclan@gmail.com> wrote: > The AD7173 family offer a complete integrated Sigma-Delta ADC solution > which can be used in high precision, low noise single channel applications > or higher speed multiplexed applications. The Sigma-Delta ADC is intended > primarily for measurement of signals close to DC but also delivers > outstanding performance with input bandwidths out to ~10kHz. > > Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com> Seems the family is a bit wider than covered here as there is at least an ad7172-4 device. It might be nice to support that if not too hard. > --- > V2 -> V3 > - remove redundant descriptions > - use referenced 'bipolar' property > - remove newlines from example > > .../bindings/iio/adc/adi,ad7173.yaml | 130 ++++++++++++++++++ > 1 file changed, 130 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml > new file mode 100644 > index 000000000000..bf9e3cbf842e > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml > @@ -0,0 +1,130 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2023 Analog Devices Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices AD7173 ADC device driver > + > +maintainers: > + - Ceclan Dumitru <dumitru.ceclan@analog.com> > + > +description: | > + Bindings for the Analog Devices AD717X ADC's. Datasheets for supported chips: > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf > + > +properties: > + compatible: > + enum: > + - adi,ad7172-2 > + - adi,ad7173-8 > + - adi,ad7175-2 > + - adi,ad7176-2 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + spi-max-frequency: > + maximum: 20000000 > + > + spi-cpol: > + type: boolean > + > + spi-cpha: > + type: boolean I'd like to see supplies listed here as well. > + > + required: > + - compatible > + - reg > + - interrupts > + > +patternProperties: > + "^channel@[0-9a-f]$": > + type: object > + $ref: adc.yaml > + unevaluatedProperties: false > + > + properties: > + reg: > + minimum: 0 > + maximum: 15 > + > + diff-channels: > + items: > + minimum: 0 > + maximum: 31 How can this go to 31? Do we have devices with 32 input lines? > + > + bipolar: > + type: boolean > + > + required: > + - reg > + - diff-channels > + > +allOf: > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@0 { > + compatible = "adi,ad7173-8"; > + reg = <0>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; > + interrupt-parent = <&gpio>; > + spi-max-frequency = <5000000>; > + > + channel@0 { > + reg = <0>; > + bipolar; > + diff-channels = <0 1>; > + }; > + > + channel@1 { > + reg = <1>; > + diff-channels = <2 3>; > + }; > + > + channel@2 { > + reg = <2>; > + bipolar; > + diff-channels = <4 5>; > + }; > + > + channel@3 { > + reg = <3>; > + bipolar; > + diff-channels = <6 7>; > + }; > + > + channel@4 { > + reg = <4>; > + diff-channels = <8 9>; > + }; > + }; > + };
On Thu, Oct 05, 2023 at 01:59:21PM +0300, Dumitru Ceclan wrote: > The AD7173 family offer a complete integrated Sigma-Delta ADC solution > which can be used in high precision, low noise single channel applications > or higher speed multiplexed applications. The Sigma-Delta ADC is intended > primarily for measurement of signals close to DC but also delivers > outstanding performance with input bandwidths out to ~10kHz. > > Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com> With Jonathan's two items addressed, you can add: Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor. > --- > V2 -> V3 > - remove redundant descriptions > - use referenced 'bipolar' property > - remove newlines from example > > .../bindings/iio/adc/adi,ad7173.yaml | 130 ++++++++++++++++++ > 1 file changed, 130 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml > new file mode 100644 > index 000000000000..bf9e3cbf842e > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml > @@ -0,0 +1,130 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2023 Analog Devices Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices AD7173 ADC device driver > + > +maintainers: > + - Ceclan Dumitru <dumitru.ceclan@analog.com> > + > +description: | > + Bindings for the Analog Devices AD717X ADC's. Datasheets for supported chips: > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf > + > +properties: > + compatible: > + enum: > + - adi,ad7172-2 > + - adi,ad7173-8 > + - adi,ad7175-2 > + - adi,ad7176-2 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + spi-max-frequency: > + maximum: 20000000 > + > + spi-cpol: > + type: boolean > + > + spi-cpha: > + type: boolean > + > + required: > + - compatible > + - reg > + - interrupts > + > +patternProperties: > + "^channel@[0-9a-f]$": > + type: object > + $ref: adc.yaml > + unevaluatedProperties: false > + > + properties: > + reg: > + minimum: 0 > + maximum: 15 > + > + diff-channels: > + items: > + minimum: 0 > + maximum: 31 > + > + bipolar: > + type: boolean > + > + required: > + - reg > + - diff-channels > + > +allOf: > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@0 { > + compatible = "adi,ad7173-8"; > + reg = <0>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; > + interrupt-parent = <&gpio>; > + spi-max-frequency = <5000000>; > + > + channel@0 { > + reg = <0>; > + bipolar; > + diff-channels = <0 1>; > + }; > + > + channel@1 { > + reg = <1>; > + diff-channels = <2 3>; > + }; > + > + channel@2 { > + reg = <2>; > + bipolar; > + diff-channels = <4 5>; > + }; > + > + channel@3 { > + reg = <3>; > + bipolar; > + diff-channels = <6 7>; > + }; > + > + channel@4 { > + reg = <4>; > + diff-channels = <8 9>; > + }; > + }; > + }; > -- > 2.39.2 >
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml new file mode 100644 index 000000000000..bf9e3cbf842e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7173 ADC device driver + +maintainers: + - Ceclan Dumitru <dumitru.ceclan@analog.com> + +description: | + Bindings for the Analog Devices AD717X ADC's. Datasheets for supported chips: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf + +properties: + compatible: + enum: + - adi,ad7172-2 + - adi,ad7173-8 + - adi,ad7175-2 + - adi,ad7176-2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + spi-max-frequency: + maximum: 20000000 + + spi-cpol: + type: boolean + + spi-cpha: + type: boolean + + required: + - compatible + - reg + - interrupts + +patternProperties: + "^channel@[0-9a-f]$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 15 + + diff-channels: + items: + minimum: 0 + maximum: 31 + + bipolar: + type: boolean + + required: + - reg + - diff-channels + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7173-8"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + spi-max-frequency = <5000000>; + + channel@0 { + reg = <0>; + bipolar; + diff-channels = <0 1>; + }; + + channel@1 { + reg = <1>; + diff-channels = <2 3>; + }; + + channel@2 { + reg = <2>; + bipolar; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + bipolar; + diff-channels = <6 7>; + }; + + channel@4 { + reg = <4>; + diff-channels = <8 9>; + }; + }; + };
The AD7173 family offer a complete integrated Sigma-Delta ADC solution which can be used in high precision, low noise single channel applications or higher speed multiplexed applications. The Sigma-Delta ADC is intended primarily for measurement of signals close to DC but also delivers outstanding performance with input bandwidths out to ~10kHz. Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com> --- V2 -> V3 - remove redundant descriptions - use referenced 'bipolar' property - remove newlines from example .../bindings/iio/adc/adi,ad7173.yaml | 130 ++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml