diff mbox series

[v4,10/17] staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr

Message ID 20231005-ad2s1210-mainline-v4-10-ec00746840fc@baylibre.com (mailing list archive)
State Accepted
Headers show
Series iio: resolver: move ad2s1210 out of staging | expand

Commit Message

David Lechner Oct. 6, 2023, 12:50 a.m. UTC 
The AD2S1210 has a programmable threshold for the degradation of signal
(DOS) mismatch fault. This fault is triggered when the difference in
voltage between the sine and cosine inputs exceeds the threshold. In
other words, when the magnitude of sine and cosine inputs are equal,
the AC component of the monitor signal is zero and when the magnitudes
of the sine and cosine inputs are not equal, the AC component of the
monitor signal is the difference between the sine and cosine inputs.
So the fault occurs when the magnitude of the AC component of the
monitor signal exceeds the DOS mismatch threshold voltage.

This patch converts the custom device DOS mismatch threshold attribute
to an event magnitude attribute on the monitor signal channel.

The attribute now uses millivolts instead of the raw register value in
accordance with the IIO ABI.

Emitting the event will be implemented in a later patch.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---

v4 changes:
* Changed event direction from none to rising.
* Fixed missing static qualifier on attribute definition.

v3 changes: This is a new patch in v3


 drivers/staging/iio/resolver/ad2s1210.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

Comments

Jonathan Cameron Oct. 10, 2023, 3:56 p.m. UTC | #1 
On Thu,  5 Oct 2023 19:50:27 -0500
David Lechner <dlechner@baylibre.com> wrote:

> The AD2S1210 has a programmable threshold for the degradation of signal
> (DOS) mismatch fault. This fault is triggered when the difference in
> voltage between the sine and cosine inputs exceeds the threshold. In
> other words, when the magnitude of sine and cosine inputs are equal,
> the AC component of the monitor signal is zero and when the magnitudes
> of the sine and cosine inputs are not equal, the AC component of the
> monitor signal is the difference between the sine and cosine inputs.
> So the fault occurs when the magnitude of the AC component of the
> monitor signal exceeds the DOS mismatch threshold voltage.
> 
> This patch converts the custom device DOS mismatch threshold attribute
> to an event magnitude attribute on the monitor signal channel.
> 
> The attribute now uses millivolts instead of the raw register value in
> accordance with the IIO ABI.
> 
> Emitting the event will be implemented in a later patch.
> 
> Signed-off-by: David Lechner <dlechner@baylibre.com>

Applied,

Thanks,

Jonathan
diff mbox series

Patch

diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index 3c224bbeae17..870c4a9a6214 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -747,9 +747,6 @@  static int ad2s1210_write_raw(struct iio_dev *indio_dev,
 static IIO_DEVICE_ATTR(fault, 0644,
 		       ad2s1210_show_fault, ad2s1210_clear_fault, 0);
 
-static IIO_DEVICE_ATTR(dos_mis_thrd, 0644,
-		       ad2s1210_show_reg, ad2s1210_store_reg,
-		       AD2S1210_REG_DOS_MIS_THRD);
 static IIO_DEVICE_ATTR(dos_rst_max_thrd, 0644,
 		       ad2s1210_show_reg, ad2s1210_store_reg,
 		       AD2S1210_REG_DOS_RST_MAX_THRD);
@@ -795,6 +792,12 @@  static const struct iio_event_spec ad2s1210_monitor_signal_event_spec[] = {
 		/* Degredation of signal overrange threshold. */
 		.mask_separate = BIT(IIO_EV_INFO_VALUE),
 	},
+	{
+		/* Sine/cosine DOS mismatch fault.*/
+		.type = IIO_EV_TYPE_MAG,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	},
 };
 
 static const struct iio_chan_spec ad2s1210_channels[] = {
@@ -868,7 +871,6 @@  static const struct iio_chan_spec ad2s1210_channels[] = {
 
 static struct attribute *ad2s1210_attributes[] = {
 	&iio_dev_attr_fault.dev_attr.attr,
-	&iio_dev_attr_dos_mis_thrd.dev_attr.attr,
 	&iio_dev_attr_dos_rst_max_thrd.dev_attr.attr,
 	&iio_dev_attr_dos_rst_min_thrd.dev_attr.attr,
 	NULL,
@@ -909,6 +911,8 @@  static IIO_CONST_ATTR(in_altvoltage0_thresh_falling_value_available,
 		      THRESHOLD_RANGE_STR);
 static IIO_CONST_ATTR(in_altvoltage0_thresh_rising_value_available,
 		      THRESHOLD_RANGE_STR);
+static IIO_CONST_ATTR(in_altvoltage0_mag_rising_value_available,
+		      THRESHOLD_RANGE_STR);
 static IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_value_available, 0);
 static IIO_DEVICE_ATTR_RO(in_angl1_thresh_rising_hysteresis_available, 0);
 
@@ -916,6 +920,7 @@  static struct attribute *ad2s1210_event_attributes[] = {
 	&iio_const_attr_in_phase0_mag_rising_value_available.dev_attr.attr,
 	&iio_const_attr_in_altvoltage0_thresh_falling_value_available.dev_attr.attr,
 	&iio_const_attr_in_altvoltage0_thresh_rising_value_available.dev_attr.attr,
+	&iio_const_attr_in_altvoltage0_mag_rising_value_available.dev_attr.attr,
 	&iio_dev_attr_in_angl1_thresh_rising_value_available.dev_attr.attr,
 	&iio_dev_attr_in_angl1_thresh_rising_hysteresis_available.dev_attr.attr,
 	NULL,
@@ -977,6 +982,9 @@  static int ad2s1210_read_event_value(struct iio_dev *indio_dev,
 		if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING)
 			return ad2s1210_get_voltage_threshold(st,
 						AD2S1210_REG_DOS_OVR_THRD, val);
+		if (type == IIO_EV_TYPE_MAG)
+			return ad2s1210_get_voltage_threshold(st,
+						AD2S1210_REG_DOS_MIS_THRD, val);
 		return -EINVAL;
 	case IIO_PHASE:
 		return ad2s1210_get_phase_lock_range(st, val, val2);
@@ -1013,6 +1021,9 @@  static int ad2s1210_write_event_value(struct iio_dev *indio_dev,
 		if (type == IIO_EV_TYPE_THRESH && dir == IIO_EV_DIR_RISING)
 			return ad2s1210_set_voltage_threshold(st,
 						AD2S1210_REG_DOS_OVR_THRD, val);
+		if (type == IIO_EV_TYPE_MAG)
+			return ad2s1210_set_voltage_threshold(st,
+						AD2S1210_REG_DOS_MIS_THRD, val);
 		return -EINVAL;
 	case IIO_PHASE:
 		return ad2s1210_set_phase_lock_range(st, val, val2);