| Message ID | 20230922104231.1434-6-zev@bewilderbeest.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | watchdog: aspeed: Add aspeed,reset-mask property | expand |
On Fri, 22 Sept 2023 at 20:12, Zev Weiss <zev@bewilderbeest.net> wrote: > > This property allows the device-tree to specify how the Aspeed > watchdog timer's reset mask register(s) should be set, so that > peripherals can be individually exempted from (or opted in to) being > reset when the watchdog timer expires. > > Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Joel Stanley <joel@jms.id.au> A note below. > --- > drivers/watchdog/aspeed_wdt.c | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c > index b72a858bbac7..b4773a6aaf8c 100644 > --- a/drivers/watchdog/aspeed_wdt.c > +++ b/drivers/watchdog/aspeed_wdt.c > @@ -79,6 +79,8 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table); > #define WDT_TIMEOUT_STATUS_BOOT_SECONDARY BIT(1) > #define WDT_CLEAR_TIMEOUT_STATUS 0x14 > #define WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION BIT(0) > +#define WDT_RESET_MASK1 0x1c > +#define WDT_RESET_MASK2 0x20 > > /* > * WDT_RESET_WIDTH controls the characteristics of the external pulse (if > @@ -402,6 +404,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev) > > if ((of_device_is_compatible(np, "aspeed,ast2500-wdt")) || > (of_device_is_compatible(np, "aspeed,ast2600-wdt"))) { > + u32 reset_mask[2]; > + size_t nrstmask = of_device_is_compatible(np, "aspeed,ast2600-wdt") ? 2 : 1; > u32 reg = readl(wdt->base + WDT_RESET_WIDTH); > > reg &= wdt->cfg->ext_pulse_width_mask; > @@ -419,6 +423,13 @@ static int aspeed_wdt_probe(struct platform_device *pdev) > reg |= WDT_OPEN_DRAIN_MAGIC; > > writel(reg, wdt->base + WDT_RESET_WIDTH); > + > + ret = of_property_read_u32_array(np, "aspeed,reset-mask", reset_mask, nrstmask); > + if (!ret) { > + writel(reset_mask[0], wdt->base + WDT_RESET_MASK1); > + if (nrstmask > 1) > + writel(reset_mask[1], wdt->base + WDT_RESET_MASK2); > + } This will do funky things if someone is careless enough to put the property in an ast2400 device tree. The ast2700 has four reset mask registers. Not really your problem at this point, but we might need to move to a per-soc callback in the platform data or similar. > } > > if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) { > -- > 2.40.0.5.gf6e3b97ba6d2.dirty >
On Wed, Oct 11, 2023 at 02:26:32AM PDT, Joel Stanley wrote: >On Fri, 22 Sept 2023 at 20:12, Zev Weiss <zev@bewilderbeest.net> wrote: >> >> This property allows the device-tree to specify how the Aspeed >> watchdog timer's reset mask register(s) should be set, so that >> peripherals can be individually exempted from (or opted in to) being >> reset when the watchdog timer expires. >> >> Signed-off-by: Zev Weiss <zev@bewilderbeest.net> > >Reviewed-by: Joel Stanley <joel@jms.id.au> > >A note below. > >> --- >> drivers/watchdog/aspeed_wdt.c | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c >> index b72a858bbac7..b4773a6aaf8c 100644 >> --- a/drivers/watchdog/aspeed_wdt.c >> +++ b/drivers/watchdog/aspeed_wdt.c >> @@ -79,6 +79,8 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table); >> #define WDT_TIMEOUT_STATUS_BOOT_SECONDARY BIT(1) >> #define WDT_CLEAR_TIMEOUT_STATUS 0x14 >> #define WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION BIT(0) >> +#define WDT_RESET_MASK1 0x1c >> +#define WDT_RESET_MASK2 0x20 >> >> /* >> * WDT_RESET_WIDTH controls the characteristics of the external pulse (if >> @@ -402,6 +404,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev) >> >> if ((of_device_is_compatible(np, "aspeed,ast2500-wdt")) || >> (of_device_is_compatible(np, "aspeed,ast2600-wdt"))) { >> + u32 reset_mask[2]; >> + size_t nrstmask = of_device_is_compatible(np, "aspeed,ast2600-wdt") ? 2 : 1; >> u32 reg = readl(wdt->base + WDT_RESET_WIDTH); >> >> reg &= wdt->cfg->ext_pulse_width_mask; >> @@ -419,6 +423,13 @@ static int aspeed_wdt_probe(struct platform_device *pdev) >> reg |= WDT_OPEN_DRAIN_MAGIC; >> >> writel(reg, wdt->base + WDT_RESET_WIDTH); >> + >> + ret = of_property_read_u32_array(np, "aspeed,reset-mask", reset_mask, nrstmask); >> + if (!ret) { >> + writel(reset_mask[0], wdt->base + WDT_RESET_MASK1); >> + if (nrstmask > 1) >> + writel(reset_mask[1], wdt->base + WDT_RESET_MASK2); >> + } > >This will do funky things if someone is careless enough to put the >property in an ast2400 device tree. > >The ast2700 has four reset mask registers. Not really your problem at >this point, but we might need to move to a per-soc callback in the >platform data or similar. > This chunk is within an 'if' block that only runs on ast2500 & ast2600, so it should be safely ignored on anything else. >> } >> >> if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) { >> -- >> 2.40.0.5.gf6e3b97ba6d2.dirty >>
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c index b72a858bbac7..b4773a6aaf8c 100644 --- a/drivers/watchdog/aspeed_wdt.c +++ b/drivers/watchdog/aspeed_wdt.c @@ -79,6 +79,8 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table); #define WDT_TIMEOUT_STATUS_BOOT_SECONDARY BIT(1) #define WDT_CLEAR_TIMEOUT_STATUS 0x14 #define WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION BIT(0) +#define WDT_RESET_MASK1 0x1c +#define WDT_RESET_MASK2 0x20 /* * WDT_RESET_WIDTH controls the characteristics of the external pulse (if @@ -402,6 +404,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev) if ((of_device_is_compatible(np, "aspeed,ast2500-wdt")) || (of_device_is_compatible(np, "aspeed,ast2600-wdt"))) { + u32 reset_mask[2]; + size_t nrstmask = of_device_is_compatible(np, "aspeed,ast2600-wdt") ? 2 : 1; u32 reg = readl(wdt->base + WDT_RESET_WIDTH); reg &= wdt->cfg->ext_pulse_width_mask; @@ -419,6 +423,13 @@ static int aspeed_wdt_probe(struct platform_device *pdev) reg |= WDT_OPEN_DRAIN_MAGIC; writel(reg, wdt->base + WDT_RESET_WIDTH); + + ret = of_property_read_u32_array(np, "aspeed,reset-mask", reset_mask, nrstmask); + if (!ret) { + writel(reset_mask[0], wdt->base + WDT_RESET_MASK1); + if (nrstmask > 1) + writel(reset_mask[1], wdt->base + WDT_RESET_MASK2); + } } if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) {
This property allows the device-tree to specify how the Aspeed watchdog timer's reset mask register(s) should be set, so that peripherals can be individually exempted from (or opted in to) being reset when the watchdog timer expires. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> --- drivers/watchdog/aspeed_wdt.c | 11 +++++++++++ 1 file changed, 11 insertions(+)