| Message ID | 20231010084455.1718830-1-alain.volmat@foss.st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] i2c: stm32f7: Fix PEC handling in case of SMBUS transfers | expand |
Hi Alain, On Tue, Oct 10, 2023 at 10:44:54AM +0200, Alain Volmat wrote: > In case of SMBUS byte read with PEC enabled, the whole transfer > is split into two commands. A first write command, followed by > a read command. The write command does not have any PEC byte > and a PEC byte is appended at the end of the read command. > (cf Read byte protocol with PEC in SMBUS specification) > > Within the STM32 I2C controller, handling (either sending > or receiving) of the PEC byte is done via the PECBYTE bit in > register CR2. > > Currently, the PECBYTE is set at the beginning of a transfer, > which lead to sending a PEC byte at the end of the write command > (hence losing the real last byte), and also does not check the > PEC byte received during the read command. > > This patch corrects the function stm32f7_i2c_smbus_xfer_msg > in order to only set the PECBYTE during the read command. Thanks for improving the log. > Fixes: 9e48155f6bfe ("i2c: i2c-stm32f7: Add initial SMBus protocols support") > Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> > Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> As this is a fix you should have also included and Cc'ed: Cc: <stable@vger.kernel.org> # v4.18+ No need to resend. Acked-by: Andi Shyti <andi.shyti@kernel.org> Thanks, Andi
On Tue, Oct 10, 2023 at 10:44:54AM +0200, Alain Volmat wrote: > In case of SMBUS byte read with PEC enabled, the whole transfer > is split into two commands. A first write command, followed by > a read command. The write command does not have any PEC byte > and a PEC byte is appended at the end of the read command. > (cf Read byte protocol with PEC in SMBUS specification) > > Within the STM32 I2C controller, handling (either sending > or receiving) of the PEC byte is done via the PECBYTE bit in > register CR2. > > Currently, the PECBYTE is set at the beginning of a transfer, > which lead to sending a PEC byte at the end of the write command > (hence losing the real last byte), and also does not check the > PEC byte received during the read command. > > This patch corrects the function stm32f7_i2c_smbus_xfer_msg > in order to only set the PECBYTE during the read command. > > Fixes: 9e48155f6bfe ("i2c: i2c-stm32f7: Add initial SMBus protocols support") > Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> > Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Applied to for-current, thanks! BTW, there are some patches pending from this series for stm32f4/7. Do you have time for an ack? http://patchwork.ozlabs.org/project/linux-i2c/list/?series=359230
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index 579b30581725..0d3c9a041b56 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -1059,9 +1059,10 @@ static int stm32f7_i2c_smbus_xfer_msg(struct stm32f7_i2c_dev *i2c_dev, /* Configure PEC */ if ((flags & I2C_CLIENT_PEC) && f7_msg->size != I2C_SMBUS_QUICK) { cr1 |= STM32F7_I2C_CR1_PECEN; - cr2 |= STM32F7_I2C_CR2_PECBYTE; - if (!f7_msg->read_write) + if (!f7_msg->read_write) { + cr2 |= STM32F7_I2C_CR2_PECBYTE; f7_msg->count++; + } } else { cr1 &= ~STM32F7_I2C_CR1_PECEN; cr2 &= ~STM32F7_I2C_CR2_PECBYTE; @@ -1149,8 +1150,10 @@ static void stm32f7_i2c_smbus_rep_start(struct stm32f7_i2c_dev *i2c_dev) f7_msg->stop = true; /* Add one byte for PEC if needed */ - if (cr1 & STM32F7_I2C_CR1_PECEN) + if (cr1 & STM32F7_I2C_CR1_PECEN) { + cr2 |= STM32F7_I2C_CR2_PECBYTE; f7_msg->count++; + } /* Set number of bytes to be transferred */ cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK);
In case of SMBUS byte read with PEC enabled, the whole transfer is split into two commands. A first write command, followed by a read command. The write command does not have any PEC byte and a PEC byte is appended at the end of the read command. (cf Read byte protocol with PEC in SMBUS specification) Within the STM32 I2C controller, handling (either sending or receiving) of the PEC byte is done via the PECBYTE bit in register CR2. Currently, the PECBYTE is set at the beginning of a transfer, which lead to sending a PEC byte at the end of the write command (hence losing the real last byte), and also does not check the PEC byte received during the read command. This patch corrects the function stm32f7_i2c_smbus_xfer_msg in order to only set the PECBYTE during the read command. Fixes: 9e48155f6bfe ("i2c: i2c-stm32f7: Add initial SMBus protocols support") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> --- v2: - add more details about the issue within the commit log - removal of blank line between Fixes and Signed-off-by drivers/i2c/busses/i2c-stm32f7.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)