| Message ID | 20231010092051.608007-1-haowenchao2@huawei.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | scsi:scsi_debug: Add error injection for single device | expand |
On 2023/10/10 17:20, Wenchao Hao wrote: > The original error injection mechanism was based on scsi_host which > could not inject fault for a single SCSI device. > > This patchset provides the ability to inject errors for a single > SCSI device. Now we support inject timeout errors, queuecommand > errors, and hostbyte, driverbyte, statusbyte, and sense data for > specific SCSI Command. Two new error injection is defined to make > abort command or reset LUN failed. > > Besides error injection for single device, this patchset add a > new interface to make reset target failed for each scsi_target. > > The first two patch add a debugfs interface to add and inquiry single > device's error injection info; the third patch defined how to remove > an injection which has been added. The following 5 patches use the > injection info and generate the related error type. The last two just > add a new interface to make reset target failed and control > scsi_device's allow_restart flag. > Friendly ping... > V6: > - Check return value of debugfs_create_xxx() and print error log > if debugfs_create_xxx() return error > - Fix typo in description of patch7 and patch8 > - Update the description of patch10 > > V5: > - Using rcu list to sync between error inject add, remove and check > - Add module parameter "allow_restart" to control scsi_device's > allow_restart flag > > V4: > - Fix BUG_ON triggered by schedule in atomic context when rmmod scsi_debug > Closes: https://lore.kernel.org/oe-lkp/202308031027.5941ce5f-oliver.sang@intel.com > > V3: > - Add two more error types to fail abort command and lun reset > - Fix memleak when rmmod scsi_debug without clearing errors injected > - Fix memkeak because did not implement release in sdebug_error_fops > - Fix possible NULL point access in scsi_debug_slave_destroy > - Move specific error type's description to each single patch which > implement this error type > - Add interface to make target reset fail > > V2: > - Using debugfs rather than sysfs attribute interface to manage error > > Wenchao Hao (10): > scsi: scsi_debug: create scsi_debug directory in the debugfs filesystem > scsi: scsi_debug: Add interface to manage single device's error inject > scsi: scsi_debug: Define grammar to remove added error injection > scsi: scsi_debug: timeout command if the error is injected > scsi: scsi_debug: Return failed value if the error is injected > scsi: scsi_debug: set command's result and sense data if the error is injected > scsi: scsi_debug: Add new error injection abort failed > scsi: scsi_debug: Add new error injection reset lun failed > scsi: scsi_debug: Add debugfs interface to fail target reset > scsi: scsi_debug: Add param to control sdev's allow_restart > > drivers/scsi/scsi_debug.c | 575 +++++++++++++++++++++++++++++++++++++- > 1 file changed, 570 insertions(+), 5 deletions(-) >
Wenchao, > The original error injection mechanism was based on scsi_host which > could not inject fault for a single SCSI device. Applied to 6.7/scsi-staging, thanks!
On Tue, 10 Oct 2023 17:20:41 +0800, Wenchao Hao wrote: > The original error injection mechanism was based on scsi_host which > could not inject fault for a single SCSI device. > > This patchset provides the ability to inject errors for a single > SCSI device. Now we support inject timeout errors, queuecommand > errors, and hostbyte, driverbyte, statusbyte, and sense data for > specific SCSI Command. Two new error injection is defined to make > abort command or reset LUN failed. > > [...] Applied to 6.7/scsi-queue, thanks! [01/10] scsi: scsi_debug: create scsi_debug directory in the debugfs filesystem https://git.kernel.org/mkp/scsi/c/6e2d15f59b1c [02/10] scsi: scsi_debug: Add interface to manage single device's error inject https://git.kernel.org/mkp/scsi/c/a9996d722b11 [03/10] scsi: scsi_debug: Define grammar to remove added error injection https://git.kernel.org/mkp/scsi/c/962d77cd4c85 [04/10] scsi: scsi_debug: timeout command if the error is injected https://git.kernel.org/mkp/scsi/c/32be8b6e22eb [05/10] scsi: scsi_debug: Return failed value if the error is injected https://git.kernel.org/mkp/scsi/c/33bccf55c20b [06/10] scsi: scsi_debug: set command's result and sense data if the error is injected https://git.kernel.org/mkp/scsi/c/33592274321e [07/10] scsi: scsi_debug: Add new error injection abort failed https://git.kernel.org/mkp/scsi/c/5551ce928805 [08/10] scsi: scsi_debug: Add new error injection reset lun failed https://git.kernel.org/mkp/scsi/c/0267811625e1 [09/10] scsi: scsi_debug: Add debugfs interface to fail target reset https://git.kernel.org/mkp/scsi/c/f084fe52c640 [10/10] scsi: scsi_debug: Add param to control sdev's allow_restart https://git.kernel.org/mkp/scsi/c/573c2d066eb9
The original error injection mechanism was based on scsi_host which could not inject fault for a single SCSI device. This patchset provides the ability to inject errors for a single SCSI device. Now we support inject timeout errors, queuecommand errors, and hostbyte, driverbyte, statusbyte, and sense data for specific SCSI Command. Two new error injection is defined to make abort command or reset LUN failed. Besides error injection for single device, this patchset add a new interface to make reset target failed for each scsi_target. The first two patch add a debugfs interface to add and inquiry single device's error injection info; the third patch defined how to remove an injection which has been added. The following 5 patches use the injection info and generate the related error type. The last two just add a new interface to make reset target failed and control scsi_device's allow_restart flag. V6: - Check return value of debugfs_create_xxx() and print error log if debugfs_create_xxx() return error - Fix typo in description of patch7 and patch8 - Update the description of patch10 V5: - Using rcu list to sync between error inject add, remove and check - Add module parameter "allow_restart" to control scsi_device's allow_restart flag V4: - Fix BUG_ON triggered by schedule in atomic context when rmmod scsi_debug Closes: https://lore.kernel.org/oe-lkp/202308031027.5941ce5f-oliver.sang@intel.com V3: - Add two more error types to fail abort command and lun reset - Fix memleak when rmmod scsi_debug without clearing errors injected - Fix memkeak because did not implement release in sdebug_error_fops - Fix possible NULL point access in scsi_debug_slave_destroy - Move specific error type's description to each single patch which implement this error type - Add interface to make target reset fail V2: - Using debugfs rather than sysfs attribute interface to manage error Wenchao Hao (10): scsi: scsi_debug: create scsi_debug directory in the debugfs filesystem scsi: scsi_debug: Add interface to manage single device's error inject scsi: scsi_debug: Define grammar to remove added error injection scsi: scsi_debug: timeout command if the error is injected scsi: scsi_debug: Return failed value if the error is injected scsi: scsi_debug: set command's result and sense data if the error is injected scsi: scsi_debug: Add new error injection abort failed scsi: scsi_debug: Add new error injection reset lun failed scsi: scsi_debug: Add debugfs interface to fail target reset scsi: scsi_debug: Add param to control sdev's allow_restart drivers/scsi/scsi_debug.c | 575 +++++++++++++++++++++++++++++++++++++- 1 file changed, 570 insertions(+), 5 deletions(-)