diff mbox series

arm64: dts: qcom: ipq9574: enable GPIO based LED

Message ID 20231025-ipq9574-led-v1-1-b8217e997dfb@quicinc.com (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: ipq9574: enable GPIO based LED | expand

Commit Message

Kathiravan Thirumoorthy Oct. 25, 2023, 6:58 a.m. UTC 
Add support for wlan-2g LED on GPIO64.

Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
---
 arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)


---
base-commit: fe1998aa935b44ef873193c0772c43bce74f17dc
change-id: 20231025-ipq9574-led-8bdaab4c9cf6

Best regards,

Comments

Krzysztof Kozlowski Oct. 25, 2023, 7:02 a.m. UTC | #1 
On 25/10/2023 08:58, Kathiravan Thirumoorthy wrote:
> Add support for wlan-2g LED on GPIO64.
> 
> Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> index 49c9b6478357..b6f90da31778 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> @@ -51,6 +51,18 @@ button-wps {
>  			debounce-interval = <60>;
>  		};
>  	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-0 = <&gpio_leds_default>;
> +		pinctrl-names = "default";
> +
> +		led-0 {
> +			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "phy0tx";
> +			default-state = "off";

Missing function and color.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index 49c9b6478357..b6f90da31778 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -51,6 +51,18 @@  button-wps {
 			debounce-interval = <60>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
 };
 
 &blsp1_spi0 {
@@ -117,6 +129,13 @@  gpio_keys_default: gpio-keys-default-state {
 		drive-strength = <8>;
 		bias-pull-up;
 	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
 };
 
 &usb_0_dwc3 {