diff mbox series

[v5,4/4] drm/panel-edp: Avoid adding multiple preferred modes

Message ID 20231107000023.2928195-5-hsinyi@chromium.org (mailing list archive)
State New, archived
Headers show
Series Add a few panels and use correct modes | expand

Commit Message

Hsin-Yi Wang Nov. 6, 2023, 11:51 p.m. UTC 
If a non generic edp-panel is under aux-bus, the mode read from edid would
still be selected as preferred and results in multiple preferred modes,
which is ambiguous.

If both hard-coded mode and edid exists, only add mode from hard-coded.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
v4->v5: remove inapplicable comments.
---
 drivers/gpu/drm/panel/panel-edp.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Doug Anderson Nov. 7, 2023, 5:57 p.m. UTC | #1 
Hi,

On Mon, Nov 6, 2023 at 4:00 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> If a non generic edp-panel is under aux-bus, the mode read from edid would
> still be selected as preferred and results in multiple preferred modes,
> which is ambiguous.
>
> If both hard-coded mode and edid exists, only add mode from hard-coded.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> v4->v5: remove inapplicable comments.
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index c0c24d94c3a0..006939cc3fee 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -589,6 +589,7 @@  static int panel_edp_get_modes(struct drm_panel *panel,
 {
 	struct panel_edp *p = to_panel_edp(panel);
 	int num = 0;
+	bool has_hard_coded_modes = p->desc->num_timings || p->desc->num_modes;
 	bool has_override_edid_mode = p->detected_panel &&
 				      p->detected_panel != ERR_PTR(-EINVAL) &&
 				      p->detected_panel->override_edid_mode;
@@ -599,7 +600,11 @@  static int panel_edp_get_modes(struct drm_panel *panel,
 
 		if (!p->edid)
 			p->edid = drm_get_edid(connector, p->ddc);
-		if (p->edid) {
+		/*
+		 * If both edid and hard-coded modes exists, skip edid modes to
+		 * avoid multiple preferred modes.
+		 */
+		if (p->edid && !has_hard_coded_modes) {
 			if (has_override_edid_mode) {
 				/*
 				 * override_edid_mode is specified. Use
@@ -616,12 +621,7 @@  static int panel_edp_get_modes(struct drm_panel *panel,
 		pm_runtime_put_autosuspend(panel->dev);
 	}
 
-	/*
-	 * Add hard-coded panel modes. Don't call this if there are no timings
-	 * and no modes (the generic edp-panel case) because it will clobber
-	 * the display_info that was already set by drm_add_edid_modes().
-	 */
-	if (p->desc->num_timings || p->desc->num_modes)
+	if (has_hard_coded_modes)
 		num += panel_edp_get_non_edid_modes(p, connector);
 	else if (!num)
 		dev_warn(p->base.dev, "No display modes\n");