diff mbox series

[v4] drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier

Message ID 20231106114228.146574-1-mika.kahola@intel.com (mailing list archive)
State New, archived
Headers show
Series [v4] drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier | expand

Commit Message

Kahola, Mika Nov. 6, 2023, 11:42 a.m. UTC
Display driver shall read DPCD 00071h[3:1] during configuration
to get PSR setup time. This register provides the setup time
requirement on the VSC SDP entry packet. If setup time cannot be
met with the current timings
(e.g., PSR setup time + other blanking requirements > blanking time),
driver should enable sending VSC SDP one frame earlier before sending
the capture frame.

BSpec: 69895 (PSR Entry Setup Frames 17:16)

v2: Write frames before su entry to correct register (Ville, Jouni)
    Move frames before su entry calculation to it's
    own function (Ville, Jouni)
    Rename PSR Entry Setup Frames register to indicate
    Lunarlake specificity (Jouni)
v3: Modify setup entry frames calculation function to
    return the actual frames (Ville)
    Match comment with actual implementation (Jouni)
v4: Drop "set" from function naming (Jouni, Ville)
    Use i915 instead of dev_priv (Jouni)

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
---
 .../drm/i915/display/intel_display_types.h    |  1 +
 drivers/gpu/drm/i915/display/intel_psr.c      | 82 +++++++++++++++----
 drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 +
 3 files changed, 71 insertions(+), 14 deletions(-)

Comments

Hogander, Jouni Nov. 6, 2023, 12:45 p.m. UTC | #1
On Mon, 2023-11-06 at 13:42 +0200, Mika Kahola wrote:
> Display driver shall read DPCD 00071h[3:1] during configuration
> to get PSR setup time. This register provides the setup time
> requirement on the VSC SDP entry packet. If setup time cannot be
> met with the current timings
> (e.g., PSR setup time + other blanking requirements > blanking time),
> driver should enable sending VSC SDP one frame earlier before sending
> the capture frame.
> 
> BSpec: 69895 (PSR Entry Setup Frames 17:16)
> 
> v2: Write frames before su entry to correct register (Ville, Jouni)
>     Move frames before su entry calculation to it's
>     own function (Ville, Jouni)
>     Rename PSR Entry Setup Frames register to indicate
>     Lunarlake specificity (Jouni)
> v3: Modify setup entry frames calculation function to
>     return the actual frames (Ville)
>     Match comment with actual implementation (Jouni)
> v4: Drop "set" from function naming (Jouni, Ville)
>     Use i915 instead of dev_priv (Jouni)
> 
> Signed-off-by: Mika Kahola <mika.kahola@intel.com>

Reviewed-by: Jouni Högander <jouni.hogander@intel.com>

> ---
>  .../drm/i915/display/intel_display_types.h    |  1 +
>  drivers/gpu/drm/i915/display/intel_psr.c      | 82 +++++++++++++++--
> --
>  drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 +
>  3 files changed, 71 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 047fe3f8905a..92f06d67fd1e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1708,6 +1708,7 @@ struct intel_psr {
>         u32 dc3co_exitline;
>         u32 dc3co_exit_delay;
>         struct delayed_work dc3co_work;
> +       u8 entry_setup_frames;
>  };
>  
>  struct intel_dp {
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> b/drivers/gpu/drm/i915/display/intel_psr.c
> index 920f77336163..fc242916349b 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -593,6 +593,9 @@ static void intel_psr_enable_sink(struct intel_dp
> *intel_dp)
>         if (intel_dp->psr.req_psr2_sdp_prior_scanline)
>                 dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
>  
> +       if (intel_dp->psr.entry_setup_frames > 0)
> +               dpcd_val |= DP_PSR_FRAME_CAPTURE;
> +
>         drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
>  
>         drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> DP_SET_POWER_D0);
> @@ -691,6 +694,9 @@ static void hsw_activate_psr1(struct intel_dp
> *intel_dp)
>         if (DISPLAY_VER(dev_priv) >= 8)
>                 val |= EDP_PSR_CRC_ENABLE;
>  
> +       if (DISPLAY_VER(dev_priv) >= 20)
> +               val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp-
> >psr.entry_setup_frames);
> +
>         intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
>                      ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);
>  }
> @@ -728,11 +734,27 @@ static int psr2_block_count(struct intel_dp
> *intel_dp)
>         return psr2_block_count_lines(intel_dp) / 4;
>  }
>  
> +static u8 frames_before_su_entry(struct intel_dp *intel_dp)
> +{
> +       u8 frames_before_su_entry;
> +
> +       frames_before_su_entry = max_t(u8,
> +                                      intel_dp-
> >psr.sink_sync_latency + 1,
> +                                      2);
> +
> +       /* Entry setup frames must be at least 1 less than frames
> before SU entry */
> +       if (intel_dp->psr.entry_setup_frames >=
> frames_before_su_entry)
> +               frames_before_su_entry = intel_dp-
> >psr.entry_setup_frames + 1;
> +
> +       return frames_before_su_entry;
> +}
> +
>  static void hsw_activate_psr2(struct intel_dp *intel_dp)
>  {
>         struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>         enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
>         u32 val = EDP_PSR2_ENABLE;
> +       u32 psr_val = 0;
>  
>         val |=
> EDP_PSR2_IDLE_FRAMES(psr_compute_idle_frames(intel_dp));
>  
> @@ -742,7 +764,8 @@ static void hsw_activate_psr2(struct intel_dp
> *intel_dp)
>         if (DISPLAY_VER(dev_priv) >= 10 && DISPLAY_VER(dev_priv) <=
> 12)
>                 val |= EDP_Y_COORDINATE_ENABLE;
>  
> -       val |= EDP_PSR2_FRAME_BEFORE_SU(max_t(u8, intel_dp-
> >psr.sink_sync_latency + 1, 2));
> +       val |=
> EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry(intel_dp));
> +
>         val |= intel_psr2_get_tp_time(intel_dp);
>  
>         if (DISPLAY_VER(dev_priv) >= 12) {
> @@ -786,6 +809,9 @@ static void hsw_activate_psr2(struct intel_dp
> *intel_dp)
>         if (intel_dp->psr.req_psr2_sdp_prior_scanline)
>                 val |= EDP_PSR2_SU_SDP_SCANLINE;
>  
> +       if (DISPLAY_VER(dev_priv) >= 20)
> +               psr_val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp-
> >psr.entry_setup_frames);
> +
>         if (intel_dp->psr.psr2_sel_fetch_enabled) {
>                 u32 tmp;
>  
> @@ -799,7 +825,7 @@ static void hsw_activate_psr2(struct intel_dp
> *intel_dp)
>          * PSR2 HW is incorrectly using EDP_PSR_TP1_TP3_SEL and BSpec
> is
>          * recommending keep this bit unset while PSR2 is enabled.
>          */
> -       intel_de_write(dev_priv, psr_ctl_reg(dev_priv,
> cpu_transcoder), 0);
> +       intel_de_write(dev_priv, psr_ctl_reg(dev_priv,
> cpu_transcoder), psr_val);
>  
>         intel_de_write(dev_priv, EDP_PSR2_CTL(cpu_transcoder), val);
>  }
> @@ -1067,6 +1093,40 @@ static bool _compute_psr2_wake_times(struct
> intel_dp *intel_dp,
>         return true;
>  }
>  
> +static u8 intel_psr_entry_setup_frames(struct intel_dp *intel_dp,
> +                                          const struct
> drm_display_mode *adjusted_mode)
> +{
> +       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> +       int psr_setup_time = drm_dp_psr_setup_time(intel_dp-
> >psr_dpcd);
> +       u8 entry_setup_frames = 0;
> +
> +       if (psr_setup_time < 0) {
> +               drm_dbg_kms(&i915->drm,
> +                           "PSR condition failed: Invalid PSR setup
> time (0x%02x)\n",
> +                           intel_dp->psr_dpcd[1]);
> +               return -ETIME;
> +       }
> +
> +
> +       if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
> +           adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay
> - 1) {
> +               if (DISPLAY_VER(i915) >= 20) {
> +                       /* setup entry frames can be up to 3 frames
> */
> +                       entry_setup_frames = 1;
> +                       drm_dbg_kms(&i915->drm,
> +                                   "PSR setup entry frames %d\n",
> +                                   entry_setup_frames);
> +               } else {
> +                       drm_dbg_kms(&i915->drm,
> +                                   "PSR condition failed: PSR setup
> time (%d us) too long\n",
> +                                   psr_setup_time);
> +                       return -ETIME;
> +               }
> +       }
> +
> +       return entry_setup_frames;
> +}
> +
>  static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
>                                     struct intel_crtc_state
> *crtc_state)
>  {
> @@ -1214,7 +1274,7 @@ void intel_psr_compute_config(struct intel_dp
> *intel_dp,
>         struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>         const struct drm_display_mode *adjusted_mode =
>                 &crtc_state->hw.adjusted_mode;
> -       int psr_setup_time;
> +       u8 entry_setup_frames;
>  
>         /*
>          * Current PSR panels don't work reliably with VRR enabled
> @@ -1243,19 +1303,13 @@ void intel_psr_compute_config(struct intel_dp
> *intel_dp,
>                 return;
>         }
>  
> -       psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
> -       if (psr_setup_time < 0) {
> -               drm_dbg_kms(&dev_priv->drm,
> -                           "PSR condition failed: Invalid PSR setup
> time (0x%02x)\n",
> -                           intel_dp->psr_dpcd[1]);
> -               return;
> -       }
> +       entry_setup_frames = intel_psr_entry_setup_frames(intel_dp,
> adjusted_mode);
>  
> -       if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
> -           adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay
> - 1) {
> +       if (entry_setup_frames >= 0) {
> +               intel_dp->psr.entry_setup_frames =
> entry_setup_frames;
> +       } else {
>                 drm_dbg_kms(&dev_priv->drm,
> -                           "PSR condition failed: PSR setup time (%d
> us) too long\n",
> -                           psr_setup_time);
> +                           "PSR condition failed: PSR setup timing
> not met\n");
>                 return;
>         }
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> index d39951383c92..efe4306b37e0 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> @@ -35,6 +35,8 @@
>  #define  
> EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES  REG_FIELD_PREP(EDP_PSR_MIN_LINK_
> ENTRY_TIME_MASK, 3)
>  #define   EDP_PSR_MAX_SLEEP_TIME_MASK          REG_GENMASK(24, 20)
>  #define  
> EDP_PSR_MAX_SLEEP_TIME(x)            REG_FIELD_PREP(EDP_PSR_MAX_SLEEP
> _TIME_MASK, (x))
> +#define   LNL_EDP_PSR_ENTRY_SETUP_FRAMES_MASK  REG_GENMASK(17, 16)
> +#define  
> LNL_EDP_PSR_ENTRY_SETUP_FRAMES(x)    REG_FIELD_PREP(LNL_EDP_PSR_ENTRY
> _SETUP_FRAMES_MASK, (x))
>  #define   EDP_PSR_SKIP_AUX_EXIT                        REG_BIT(12)
>  #define   EDP_PSR_TP_MASK                      REG_BIT(11)
>  #define  
> EDP_PSR_TP_TP1_TP2                   REG_FIELD_PREP(EDP_PSR_TP_MASK,
> 0)
Ville Syrjala Nov. 8, 2023, 4:59 p.m. UTC | #2
On Mon, Nov 06, 2023 at 01:42:28PM +0200, Mika Kahola wrote:
> Display driver shall read DPCD 00071h[3:1] during configuration
> to get PSR setup time. This register provides the setup time
> requirement on the VSC SDP entry packet. If setup time cannot be
> met with the current timings
> (e.g., PSR setup time + other blanking requirements > blanking time),
> driver should enable sending VSC SDP one frame earlier before sending
> the capture frame.
> 
> BSpec: 69895 (PSR Entry Setup Frames 17:16)
> 
> v2: Write frames before su entry to correct register (Ville, Jouni)
>     Move frames before su entry calculation to it's
>     own function (Ville, Jouni)
>     Rename PSR Entry Setup Frames register to indicate
>     Lunarlake specificity (Jouni)
> v3: Modify setup entry frames calculation function to
>     return the actual frames (Ville)
>     Match comment with actual implementation (Jouni)
> v4: Drop "set" from function naming (Jouni, Ville)
>     Use i915 instead of dev_priv (Jouni)
> 
> Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> ---
>  .../drm/i915/display/intel_display_types.h    |  1 +
>  drivers/gpu/drm/i915/display/intel_psr.c      | 82 +++++++++++++++----
>  drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 +
>  3 files changed, 71 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 047fe3f8905a..92f06d67fd1e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1708,6 +1708,7 @@ struct intel_psr {
>  	u32 dc3co_exitline;
>  	u32 dc3co_exit_delay;
>  	struct delayed_work dc3co_work;
> +	u8 entry_setup_frames;
>  };
>  
>  struct intel_dp {
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
> index 920f77336163..fc242916349b 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -593,6 +593,9 @@ static void intel_psr_enable_sink(struct intel_dp *intel_dp)
>  	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
>  		dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
>  
> +	if (intel_dp->psr.entry_setup_frames > 0)
> +		dpcd_val |= DP_PSR_FRAME_CAPTURE;
> +
>  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
>  
>  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
> @@ -691,6 +694,9 @@ static void hsw_activate_psr1(struct intel_dp *intel_dp)
>  	if (DISPLAY_VER(dev_priv) >= 8)
>  		val |= EDP_PSR_CRC_ENABLE;
>  
> +	if (DISPLAY_VER(dev_priv) >= 20)
> +		val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
> +
>  	intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
>  		     ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);
>  }
> @@ -728,11 +734,27 @@ static int psr2_block_count(struct intel_dp *intel_dp)
>  	return psr2_block_count_lines(intel_dp) / 4;
>  }
>  
> +static u8 frames_before_su_entry(struct intel_dp *intel_dp)
          ^^

That vs -ETIME broke my tgl.

> +{
> +	u8 frames_before_su_entry;
> +
> +	frames_before_su_entry = max_t(u8,
> +				       intel_dp->psr.sink_sync_latency + 1,
> +				       2);
> +
> +	/* Entry setup frames must be at least 1 less than frames before SU entry */
> +	if (intel_dp->psr.entry_setup_frames >= frames_before_su_entry)
> +		frames_before_su_entry = intel_dp->psr.entry_setup_frames + 1;
> +
> +	return frames_before_su_entry;
> +}
> +
>  static void hsw_activate_psr2(struct intel_dp *intel_dp)
>  {
>  	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>  	enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
>  	u32 val = EDP_PSR2_ENABLE;
> +	u32 psr_val = 0;
>  
>  	val |= EDP_PSR2_IDLE_FRAMES(psr_compute_idle_frames(intel_dp));
>  
> @@ -742,7 +764,8 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
>  	if (DISPLAY_VER(dev_priv) >= 10 && DISPLAY_VER(dev_priv) <= 12)
>  		val |= EDP_Y_COORDINATE_ENABLE;
>  
> -	val |= EDP_PSR2_FRAME_BEFORE_SU(max_t(u8, intel_dp->psr.sink_sync_latency + 1, 2));
> +	val |= EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry(intel_dp));
> +
>  	val |= intel_psr2_get_tp_time(intel_dp);
>  
>  	if (DISPLAY_VER(dev_priv) >= 12) {
> @@ -786,6 +809,9 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
>  	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
>  		val |= EDP_PSR2_SU_SDP_SCANLINE;
>  
> +	if (DISPLAY_VER(dev_priv) >= 20)
> +		psr_val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
> +
>  	if (intel_dp->psr.psr2_sel_fetch_enabled) {
>  		u32 tmp;
>  
> @@ -799,7 +825,7 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
>  	 * PSR2 HW is incorrectly using EDP_PSR_TP1_TP3_SEL and BSpec is
>  	 * recommending keep this bit unset while PSR2 is enabled.
>  	 */
> -	intel_de_write(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder), 0);
> +	intel_de_write(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder), psr_val);
>  
>  	intel_de_write(dev_priv, EDP_PSR2_CTL(cpu_transcoder), val);
>  }
> @@ -1067,6 +1093,40 @@ static bool _compute_psr2_wake_times(struct intel_dp *intel_dp,
>  	return true;
>  }
>  
> +static u8 intel_psr_entry_setup_frames(struct intel_dp *intel_dp,
> +					   const struct drm_display_mode *adjusted_mode)
> +{
> +	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> +	int psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
> +	u8 entry_setup_frames = 0;
> +
> +	if (psr_setup_time < 0) {
> +		drm_dbg_kms(&i915->drm,
> +			    "PSR condition failed: Invalid PSR setup time (0x%02x)\n",
> +			    intel_dp->psr_dpcd[1]);
> +		return -ETIME;
> +	}
> +
> +
> +	if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
> +	    adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
> +		if (DISPLAY_VER(i915) >= 20) {
> +			/* setup entry frames can be up to 3 frames */
> +			entry_setup_frames = 1;
> +			drm_dbg_kms(&i915->drm,
> +				    "PSR setup entry frames %d\n",
> +				    entry_setup_frames);
> +		} else {
> +			drm_dbg_kms(&i915->drm,
> +				    "PSR condition failed: PSR setup time (%d us) too long\n",
> +				    psr_setup_time);
> +			return -ETIME;
> +		}
> +	}
> +
> +	return entry_setup_frames;
> +}
> +
>  static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
>  				    struct intel_crtc_state *crtc_state)
>  {
> @@ -1214,7 +1274,7 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
>  	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>  	const struct drm_display_mode *adjusted_mode =
>  		&crtc_state->hw.adjusted_mode;
> -	int psr_setup_time;
> +	u8 entry_setup_frames;
>  
>  	/*
>  	 * Current PSR panels don't work reliably with VRR enabled
> @@ -1243,19 +1303,13 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
>  		return;
>  	}
>  
> -	psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
> -	if (psr_setup_time < 0) {
> -		drm_dbg_kms(&dev_priv->drm,
> -			    "PSR condition failed: Invalid PSR setup time (0x%02x)\n",
> -			    intel_dp->psr_dpcd[1]);
> -		return;
> -	}
> +	entry_setup_frames = intel_psr_entry_setup_frames(intel_dp, adjusted_mode);
>  
> -	if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
> -	    adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
> +	if (entry_setup_frames >= 0) {
> +		intel_dp->psr.entry_setup_frames = entry_setup_frames;
> +	} else {
>  		drm_dbg_kms(&dev_priv->drm,
> -			    "PSR condition failed: PSR setup time (%d us) too long\n",
> -			    psr_setup_time);
> +			    "PSR condition failed: PSR setup timing not met\n");
>  		return;
>  	}
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> index d39951383c92..efe4306b37e0 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> @@ -35,6 +35,8 @@
>  #define   EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES	REG_FIELD_PREP(EDP_PSR_MIN_LINK_ENTRY_TIME_MASK, 3)
>  #define   EDP_PSR_MAX_SLEEP_TIME_MASK		REG_GENMASK(24, 20)
>  #define   EDP_PSR_MAX_SLEEP_TIME(x)		REG_FIELD_PREP(EDP_PSR_MAX_SLEEP_TIME_MASK, (x))
> +#define   LNL_EDP_PSR_ENTRY_SETUP_FRAMES_MASK	REG_GENMASK(17, 16)
> +#define   LNL_EDP_PSR_ENTRY_SETUP_FRAMES(x)	REG_FIELD_PREP(LNL_EDP_PSR_ENTRY_SETUP_FRAMES_MASK, (x))
>  #define   EDP_PSR_SKIP_AUX_EXIT			REG_BIT(12)
>  #define   EDP_PSR_TP_MASK			REG_BIT(11)
>  #define   EDP_PSR_TP_TP1_TP2			REG_FIELD_PREP(EDP_PSR_TP_MASK, 0)
> -- 
> 2.34.1
Ville Syrjala Nov. 8, 2023, 5:02 p.m. UTC | #3
On Wed, Nov 08, 2023 at 06:59:18PM +0200, Ville Syrjälä wrote:
> On Mon, Nov 06, 2023 at 01:42:28PM +0200, Mika Kahola wrote:
> > Display driver shall read DPCD 00071h[3:1] during configuration
> > to get PSR setup time. This register provides the setup time
> > requirement on the VSC SDP entry packet. If setup time cannot be
> > met with the current timings
> > (e.g., PSR setup time + other blanking requirements > blanking time),
> > driver should enable sending VSC SDP one frame earlier before sending
> > the capture frame.
> > 
> > BSpec: 69895 (PSR Entry Setup Frames 17:16)
> > 
> > v2: Write frames before su entry to correct register (Ville, Jouni)
> >     Move frames before su entry calculation to it's
> >     own function (Ville, Jouni)
> >     Rename PSR Entry Setup Frames register to indicate
> >     Lunarlake specificity (Jouni)
> > v3: Modify setup entry frames calculation function to
> >     return the actual frames (Ville)
> >     Match comment with actual implementation (Jouni)
> > v4: Drop "set" from function naming (Jouni, Ville)
> >     Use i915 instead of dev_priv (Jouni)
> > 
> > Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> > ---
> >  .../drm/i915/display/intel_display_types.h    |  1 +
> >  drivers/gpu/drm/i915/display/intel_psr.c      | 82 +++++++++++++++----
> >  drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 +
> >  3 files changed, 71 insertions(+), 14 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index 047fe3f8905a..92f06d67fd1e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -1708,6 +1708,7 @@ struct intel_psr {
> >  	u32 dc3co_exitline;
> >  	u32 dc3co_exit_delay;
> >  	struct delayed_work dc3co_work;
> > +	u8 entry_setup_frames;
> >  };
> >  
> >  struct intel_dp {
> > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
> > index 920f77336163..fc242916349b 100644
> > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> > @@ -593,6 +593,9 @@ static void intel_psr_enable_sink(struct intel_dp *intel_dp)
> >  	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
> >  		dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
> >  
> > +	if (intel_dp->psr.entry_setup_frames > 0)
> > +		dpcd_val |= DP_PSR_FRAME_CAPTURE;
> > +
> >  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
> >  
> >  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
> > @@ -691,6 +694,9 @@ static void hsw_activate_psr1(struct intel_dp *intel_dp)
> >  	if (DISPLAY_VER(dev_priv) >= 8)
> >  		val |= EDP_PSR_CRC_ENABLE;
> >  
> > +	if (DISPLAY_VER(dev_priv) >= 20)
> > +		val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
> > +
> >  	intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
> >  		     ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);
> >  }
> > @@ -728,11 +734,27 @@ static int psr2_block_count(struct intel_dp *intel_dp)
> >  	return psr2_block_count_lines(intel_dp) / 4;
> >  }
> >  
> > +static u8 frames_before_su_entry(struct intel_dp *intel_dp)
>           ^^
> 
> That vs -ETIME broke my tgl.
> 
> > +static u8 intel_psr_entry_setup_frames(struct intel_dp *intel_dp,
            ^^
No, actually that ...

> > +					   const struct drm_display_mode *adjusted_mode)
> > +{
> > +	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > +	int psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
> > +	u8 entry_setup_frames = 0;
        ^^
... and that.
Jani Nikula Nov. 8, 2023, 5:42 p.m. UTC | #4
On Wed, 08 Nov 2023, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Wed, Nov 08, 2023 at 06:59:18PM +0200, Ville Syrjälä wrote:
>> On Mon, Nov 06, 2023 at 01:42:28PM +0200, Mika Kahola wrote:
>> > Display driver shall read DPCD 00071h[3:1] during configuration
>> > to get PSR setup time. This register provides the setup time
>> > requirement on the VSC SDP entry packet. If setup time cannot be
>> > met with the current timings
>> > (e.g., PSR setup time + other blanking requirements > blanking time),
>> > driver should enable sending VSC SDP one frame earlier before sending
>> > the capture frame.
>> > 
>> > BSpec: 69895 (PSR Entry Setup Frames 17:16)
>> > 
>> > v2: Write frames before su entry to correct register (Ville, Jouni)
>> >     Move frames before su entry calculation to it's
>> >     own function (Ville, Jouni)
>> >     Rename PSR Entry Setup Frames register to indicate
>> >     Lunarlake specificity (Jouni)
>> > v3: Modify setup entry frames calculation function to
>> >     return the actual frames (Ville)
>> >     Match comment with actual implementation (Jouni)
>> > v4: Drop "set" from function naming (Jouni, Ville)
>> >     Use i915 instead of dev_priv (Jouni)
>> > 
>> > Signed-off-by: Mika Kahola <mika.kahola@intel.com>
>> > ---
>> >  .../drm/i915/display/intel_display_types.h    |  1 +
>> >  drivers/gpu/drm/i915/display/intel_psr.c      | 82 +++++++++++++++----
>> >  drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 +
>> >  3 files changed, 71 insertions(+), 14 deletions(-)
>> > 
>> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
>> > index 047fe3f8905a..92f06d67fd1e 100644
>> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
>> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
>> > @@ -1708,6 +1708,7 @@ struct intel_psr {
>> >  	u32 dc3co_exitline;
>> >  	u32 dc3co_exit_delay;
>> >  	struct delayed_work dc3co_work;
>> > +	u8 entry_setup_frames;
>> >  };
>> >  
>> >  struct intel_dp {
>> > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
>> > index 920f77336163..fc242916349b 100644
>> > --- a/drivers/gpu/drm/i915/display/intel_psr.c
>> > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
>> > @@ -593,6 +593,9 @@ static void intel_psr_enable_sink(struct intel_dp *intel_dp)
>> >  	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
>> >  		dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
>> >  
>> > +	if (intel_dp->psr.entry_setup_frames > 0)
>> > +		dpcd_val |= DP_PSR_FRAME_CAPTURE;
>> > +
>> >  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
>> >  
>> >  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
>> > @@ -691,6 +694,9 @@ static void hsw_activate_psr1(struct intel_dp *intel_dp)
>> >  	if (DISPLAY_VER(dev_priv) >= 8)
>> >  		val |= EDP_PSR_CRC_ENABLE;
>> >  
>> > +	if (DISPLAY_VER(dev_priv) >= 20)
>> > +		val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
>> > +
>> >  	intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
>> >  		     ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);
>> >  }
>> > @@ -728,11 +734,27 @@ static int psr2_block_count(struct intel_dp *intel_dp)
>> >  	return psr2_block_count_lines(intel_dp) / 4;
>> >  }
>> >  
>> > +static u8 frames_before_su_entry(struct intel_dp *intel_dp)
>>           ^^
>> 
>> That vs -ETIME broke my tgl.
>> 
>> > +static u8 intel_psr_entry_setup_frames(struct intel_dp *intel_dp,
>             ^^
> No, actually that ...

*sigh*

I eyeballed the patch and the u8 and thought about giving my standard
issue "please use ints unless you have specific reasons to use something
else" comment. But didn't.

It's a "code smell". It's suspicious even if it isn't broken.

BR,
Jani.


>
>> > +					   const struct drm_display_mode *adjusted_mode)
>> > +{
>> > +	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>> > +	int psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
>> > +	u8 entry_setup_frames = 0;
>         ^^
> ... and that.
Kahola, Mika Nov. 9, 2023, 1:41 p.m. UTC | #5
> -----Original Message-----
> From: Jani Nikula <jani.nikula@linux.intel.com>
> Sent: Wednesday, November 8, 2023 7:42 PM
> To: Ville Syrjälä <ville.syrjala@linux.intel.com>; Kahola, Mika <mika.kahola@intel.com>
> Cc: intel-gfx@lists.freedesktop.org
> Subject: Re: [Intel-gfx] [PATCH v4] drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier
> 
> On Wed, 08 Nov 2023, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> > On Wed, Nov 08, 2023 at 06:59:18PM +0200, Ville Syrjälä wrote:
> >> On Mon, Nov 06, 2023 at 01:42:28PM +0200, Mika Kahola wrote:
> >> > Display driver shall read DPCD 00071h[3:1] during configuration to
> >> > get PSR setup time. This register provides the setup time
> >> > requirement on the VSC SDP entry packet. If setup time cannot be
> >> > met with the current timings (e.g., PSR setup time + other blanking
> >> > requirements > blanking time), driver should enable sending VSC SDP
> >> > one frame earlier before sending the capture frame.
> >> >
> >> > BSpec: 69895 (PSR Entry Setup Frames 17:16)
> >> >
> >> > v2: Write frames before su entry to correct register (Ville, Jouni)
> >> >     Move frames before su entry calculation to it's
> >> >     own function (Ville, Jouni)
> >> >     Rename PSR Entry Setup Frames register to indicate
> >> >     Lunarlake specificity (Jouni)
> >> > v3: Modify setup entry frames calculation function to
> >> >     return the actual frames (Ville)
> >> >     Match comment with actual implementation (Jouni)
> >> > v4: Drop "set" from function naming (Jouni, Ville)
> >> >     Use i915 instead of dev_priv (Jouni)
> >> >
> >> > Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> >> > ---
> >> >  .../drm/i915/display/intel_display_types.h    |  1 +
> >> >  drivers/gpu/drm/i915/display/intel_psr.c      | 82 +++++++++++++++----
> >> >  drivers/gpu/drm/i915/display/intel_psr_regs.h |  2 +
> >> >  3 files changed, 71 insertions(+), 14 deletions(-)
> >> >
> >> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> >> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> >> > index 047fe3f8905a..92f06d67fd1e 100644
> >> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> >> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> >> > @@ -1708,6 +1708,7 @@ struct intel_psr {
> >> >  	u32 dc3co_exitline;
> >> >  	u32 dc3co_exit_delay;
> >> >  	struct delayed_work dc3co_work;
> >> > +	u8 entry_setup_frames;
> >> >  };
> >> >
> >> >  struct intel_dp {
> >> > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> >> > b/drivers/gpu/drm/i915/display/intel_psr.c
> >> > index 920f77336163..fc242916349b 100644
> >> > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> >> > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> >> > @@ -593,6 +593,9 @@ static void intel_psr_enable_sink(struct intel_dp *intel_dp)
> >> >  	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
> >> >  		dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
> >> >
> >> > +	if (intel_dp->psr.entry_setup_frames > 0)
> >> > +		dpcd_val |= DP_PSR_FRAME_CAPTURE;
> >> > +
> >> >  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
> >> >
> >> >  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> >> > DP_SET_POWER_D0); @@ -691,6 +694,9 @@ static void hsw_activate_psr1(struct intel_dp *intel_dp)
> >> >  	if (DISPLAY_VER(dev_priv) >= 8)
> >> >  		val |= EDP_PSR_CRC_ENABLE;
> >> >
> >> > +	if (DISPLAY_VER(dev_priv) >= 20)
> >> > +		val |=
> >> > +LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
> >> > +
> >> >  	intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
> >> >  		     ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);  } @@ -728,11
> >> > +734,27 @@ static int psr2_block_count(struct intel_dp *intel_dp)
> >> >  	return psr2_block_count_lines(intel_dp) / 4;  }
> >> >
> >> > +static u8 frames_before_su_entry(struct intel_dp *intel_dp)
> >>           ^^
> >>
> >> That vs -ETIME broke my tgl.
> >>
> >> > +static u8 intel_psr_entry_setup_frames(struct intel_dp *intel_dp,
> >             ^^
> > No, actually that ...
> 
> *sigh*
> 
> I eyeballed the patch and the u8 and thought about giving my standard issue "please use ints unless you have specific reasons to
> use something else" comment. But didn't.

So it's time to switch to use ints. Thought entry_setup_frames would fit to u8 but I guess wasn't the case after all.

Thanks for spotting this!

-Mika- 
> 
> It's a "code smell". It's suspicious even if it isn't broken.
> 
> BR,
> Jani.
> 
> 
> >
> >> > +					   const struct drm_display_mode *adjusted_mode) {
> >> > +	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> >> > +	int psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
> >> > +	u8 entry_setup_frames = 0;
> >         ^^
> > ... and that.
> 
> --
> Jani Nikula, Intel
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 047fe3f8905a..92f06d67fd1e 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1708,6 +1708,7 @@  struct intel_psr {
 	u32 dc3co_exitline;
 	u32 dc3co_exit_delay;
 	struct delayed_work dc3co_work;
+	u8 entry_setup_frames;
 };
 
 struct intel_dp {
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 920f77336163..fc242916349b 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -593,6 +593,9 @@  static void intel_psr_enable_sink(struct intel_dp *intel_dp)
 	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
 		dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
 
+	if (intel_dp->psr.entry_setup_frames > 0)
+		dpcd_val |= DP_PSR_FRAME_CAPTURE;
+
 	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
 
 	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
@@ -691,6 +694,9 @@  static void hsw_activate_psr1(struct intel_dp *intel_dp)
 	if (DISPLAY_VER(dev_priv) >= 8)
 		val |= EDP_PSR_CRC_ENABLE;
 
+	if (DISPLAY_VER(dev_priv) >= 20)
+		val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
+
 	intel_de_rmw(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder),
 		     ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val);
 }
@@ -728,11 +734,27 @@  static int psr2_block_count(struct intel_dp *intel_dp)
 	return psr2_block_count_lines(intel_dp) / 4;
 }
 
+static u8 frames_before_su_entry(struct intel_dp *intel_dp)
+{
+	u8 frames_before_su_entry;
+
+	frames_before_su_entry = max_t(u8,
+				       intel_dp->psr.sink_sync_latency + 1,
+				       2);
+
+	/* Entry setup frames must be at least 1 less than frames before SU entry */
+	if (intel_dp->psr.entry_setup_frames >= frames_before_su_entry)
+		frames_before_su_entry = intel_dp->psr.entry_setup_frames + 1;
+
+	return frames_before_su_entry;
+}
+
 static void hsw_activate_psr2(struct intel_dp *intel_dp)
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
 	u32 val = EDP_PSR2_ENABLE;
+	u32 psr_val = 0;
 
 	val |= EDP_PSR2_IDLE_FRAMES(psr_compute_idle_frames(intel_dp));
 
@@ -742,7 +764,8 @@  static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	if (DISPLAY_VER(dev_priv) >= 10 && DISPLAY_VER(dev_priv) <= 12)
 		val |= EDP_Y_COORDINATE_ENABLE;
 
-	val |= EDP_PSR2_FRAME_BEFORE_SU(max_t(u8, intel_dp->psr.sink_sync_latency + 1, 2));
+	val |= EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry(intel_dp));
+
 	val |= intel_psr2_get_tp_time(intel_dp);
 
 	if (DISPLAY_VER(dev_priv) >= 12) {
@@ -786,6 +809,9 @@  static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	if (intel_dp->psr.req_psr2_sdp_prior_scanline)
 		val |= EDP_PSR2_SU_SDP_SCANLINE;
 
+	if (DISPLAY_VER(dev_priv) >= 20)
+		psr_val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames);
+
 	if (intel_dp->psr.psr2_sel_fetch_enabled) {
 		u32 tmp;
 
@@ -799,7 +825,7 @@  static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	 * PSR2 HW is incorrectly using EDP_PSR_TP1_TP3_SEL and BSpec is
 	 * recommending keep this bit unset while PSR2 is enabled.
 	 */
-	intel_de_write(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder), 0);
+	intel_de_write(dev_priv, psr_ctl_reg(dev_priv, cpu_transcoder), psr_val);
 
 	intel_de_write(dev_priv, EDP_PSR2_CTL(cpu_transcoder), val);
 }
@@ -1067,6 +1093,40 @@  static bool _compute_psr2_wake_times(struct intel_dp *intel_dp,
 	return true;
 }
 
+static u8 intel_psr_entry_setup_frames(struct intel_dp *intel_dp,
+					   const struct drm_display_mode *adjusted_mode)
+{
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	int psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
+	u8 entry_setup_frames = 0;
+
+	if (psr_setup_time < 0) {
+		drm_dbg_kms(&i915->drm,
+			    "PSR condition failed: Invalid PSR setup time (0x%02x)\n",
+			    intel_dp->psr_dpcd[1]);
+		return -ETIME;
+	}
+
+
+	if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
+	    adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
+		if (DISPLAY_VER(i915) >= 20) {
+			/* setup entry frames can be up to 3 frames */
+			entry_setup_frames = 1;
+			drm_dbg_kms(&i915->drm,
+				    "PSR setup entry frames %d\n",
+				    entry_setup_frames);
+		} else {
+			drm_dbg_kms(&i915->drm,
+				    "PSR condition failed: PSR setup time (%d us) too long\n",
+				    psr_setup_time);
+			return -ETIME;
+		}
+	}
+
+	return entry_setup_frames;
+}
+
 static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 				    struct intel_crtc_state *crtc_state)
 {
@@ -1214,7 +1274,7 @@  void intel_psr_compute_config(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
 	const struct drm_display_mode *adjusted_mode =
 		&crtc_state->hw.adjusted_mode;
-	int psr_setup_time;
+	u8 entry_setup_frames;
 
 	/*
 	 * Current PSR panels don't work reliably with VRR enabled
@@ -1243,19 +1303,13 @@  void intel_psr_compute_config(struct intel_dp *intel_dp,
 		return;
 	}
 
-	psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
-	if (psr_setup_time < 0) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "PSR condition failed: Invalid PSR setup time (0x%02x)\n",
-			    intel_dp->psr_dpcd[1]);
-		return;
-	}
+	entry_setup_frames = intel_psr_entry_setup_frames(intel_dp, adjusted_mode);
 
-	if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
-	    adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
+	if (entry_setup_frames >= 0) {
+		intel_dp->psr.entry_setup_frames = entry_setup_frames;
+	} else {
 		drm_dbg_kms(&dev_priv->drm,
-			    "PSR condition failed: PSR setup time (%d us) too long\n",
-			    psr_setup_time);
+			    "PSR condition failed: PSR setup timing not met\n");
 		return;
 	}
 
diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h
index d39951383c92..efe4306b37e0 100644
--- a/drivers/gpu/drm/i915/display/intel_psr_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h
@@ -35,6 +35,8 @@ 
 #define   EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES	REG_FIELD_PREP(EDP_PSR_MIN_LINK_ENTRY_TIME_MASK, 3)
 #define   EDP_PSR_MAX_SLEEP_TIME_MASK		REG_GENMASK(24, 20)
 #define   EDP_PSR_MAX_SLEEP_TIME(x)		REG_FIELD_PREP(EDP_PSR_MAX_SLEEP_TIME_MASK, (x))
+#define   LNL_EDP_PSR_ENTRY_SETUP_FRAMES_MASK	REG_GENMASK(17, 16)
+#define   LNL_EDP_PSR_ENTRY_SETUP_FRAMES(x)	REG_FIELD_PREP(LNL_EDP_PSR_ENTRY_SETUP_FRAMES_MASK, (x))
 #define   EDP_PSR_SKIP_AUX_EXIT			REG_BIT(12)
 #define   EDP_PSR_TP_MASK			REG_BIT(11)
 #define   EDP_PSR_TP_TP1_TP2			REG_FIELD_PREP(EDP_PSR_TP_MASK, 0)