diff mbox series

[v3,2/2] iio: light: isl76682: Add ISL76682 driver

Message ID 20231119212515.54001-2-marex@denx.de (mailing list archive)
State Superseded
Headers show
Series [v3,1/2] dt-bindings: iio: light: isl76682: Document ISL76682 | expand

Commit Message

Marek Vasut Nov. 19, 2023, 9:24 p.m. UTC
The ISL76682 is very basic ALS which only supports ALS or IR mode
in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any
other fancy functionality.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Andre Werner <andre.werner@systec-electronic.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
Cc: Vincent Tremblay <vincent@vtremblay.dev>
Cc: devicetree@vger.kernel.org
Cc: linux-iio@vger.kernel.org
---
V2: - Overhaul the driver
    - Cache the entire 8-bit command register instead of parts of it
      and build up and rewrite the entire register if necessary
    - Fix illumination scale, add intensity scale, add integration time
V3: - Limit the read data to 16bit ADC range
    - Update Kconfig description
    - Update macros, drop bitshifts
    - Switch over to table lookup for lux ranges
    - Switch over to .read_avail instead of attributes
    - Use guard where applicable
    - Drop remove function in favor of reset action
---
 drivers/iio/light/Kconfig    |  15 ++
 drivers/iio/light/Makefile   |   1 +
 drivers/iio/light/isl76682.c | 354 +++++++++++++++++++++++++++++++++++
 3 files changed, 370 insertions(+)
 create mode 100644 drivers/iio/light/isl76682.c

Comments

Andy Shevchenko Nov. 20, 2023, 12:02 p.m. UTC | #1
On Sun, Nov 19, 2023 at 10:24:35PM +0100, Marek Vasut wrote:
> The ISL76682 is very basic ALS which only supports ALS or IR mode
> in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any
> other fancy functionality.

...

> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>

This is incomplete.

At least array_size.h, bits.h, cleanup.h, types.h are missing.

...

> +#define ISL76682_ADC_MAX			0xffff

Wouldn't the (BIT(16) - 1) be better in order to show that this is limited by
a bit field capacity. Also you can use FIELD_MAX().

...

> +static int isl76682_read_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan,
> +			     int *val, int *val2, long mask)
> +{
> +	struct isl76682_chip *chip = iio_priv(indio_dev);

> +	int ret = -EINVAL;

This is less maintainable, use it directly (see below).
Ah, the value is even not used!

> +	int i;
> +
> +	if (chan->type != IIO_LIGHT && chan->type != IIO_INTENSITY)
> +		return -EINVAL;
> +
> +	guard(mutex)(&chip->lock);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		switch (chan->type) {
> +		case IIO_LIGHT:
> +			ret = isl76682_get(chip, false, val);
> +			return (ret < 0) ? ret : IIO_VAL_INT;
> +		case IIO_INTENSITY:
> +			ret = isl76682_get(chip, true, val);
> +			return (ret < 0) ? ret : IIO_VAL_INT;
> +		default:

> +			break;

			return -EINVAL;

> +		}
> +
> +		return -EINVAL;
> +	case IIO_CHAN_INFO_SCALE:
> +		for (i = 0; i < ARRAY_SIZE(isl76682_range_table); i++) {
> +			if (chip->range != isl76682_range_table[i].range)
> +				continue;
> +
> +			*val = 0;

...

> +			if (chan->type == IIO_LIGHT)
> +				*val2 = isl76682_range_table[i].als;
> +			else if (chan->type == IIO_INTENSITY)
> +				*val2 = isl76682_range_table[i].ir;
> +			else
> +				return -EINVAL;

Why not switch-case for consistency's sake?

> +			return IIO_VAL_INT_PLUS_MICRO;
> +		}
> +		return -EINVAL;
> +	case IIO_CHAN_INFO_INT_TIME:
> +		*val = 0;
> +		*val2 = ISL76682_INT_TIME_US;
> +		return IIO_VAL_INT_PLUS_MICRO;

> +	default:
> +		break;
> +	}
> +
> +	return -EINVAL;

Move it to default.

> +}

...

> +static int illuminance_scale_available[] = {
> +	0, 15000,
> +	0, 60000,
> +	0, 240000,
> +	0, 960000

Leave trailing comma as it's not a terminator and will be an additional burden
if this list is going to be expanded in the future.

> +};
> +
> +static int intensity_scale_available[] = {
> +	0, 10500,
> +	0, 42000,
> +	0, 168000,
> +	0, 673000

Ditto.

> +};

...

> +static int isl76682_read_avail(struct iio_dev *indio_dev,
> +			       struct iio_chan_spec const *chan,
> +			       const int **vals, int *type,
> +			       int *length, long mask)
> +{
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SCALE:
> +		if (chan->type == IIO_LIGHT) {
> +			*vals = illuminance_scale_available;
> +			*length = ARRAY_SIZE(illuminance_scale_available);
> +			*type = IIO_VAL_INT_PLUS_MICRO;
> +			return IIO_AVAIL_LIST;
> +		} else if (chan->type == IIO_INTENSITY) {
> +			*vals = intensity_scale_available;
> +			*length = ARRAY_SIZE(intensity_scale_available);
> +			*type = IIO_VAL_INT_PLUS_MICRO;
> +			return IIO_AVAIL_LIST;
> +		}
> +		return -EINVAL;

Same Q: why not switch-case?

> +	case IIO_CHAN_INFO_INT_TIME:
> +		*vals = integration_time_available;
> +		*length = ARRAY_SIZE(integration_time_available);
> +		*type = IIO_VAL_INT_PLUS_MICRO;
> +		return IIO_AVAIL_LIST;

> +	default:
> +		break;
> +	}
> +
> +	return -EINVAL;

Move it to default.

> +}

...

> +static int isl76682_clear_configure_reg(struct isl76682_chip *chip)
> +{
> +	struct device *dev = regmap_get_device(chip->regmap);
> +	int ret;
> +
> +	ret = regmap_write(chip->regmap, ISL76682_REG_COMMAND, 0x0);
> +	if (ret < 0)
> +		dev_err(dev, "Error %d clearing the CONFIGURE register\n", ret);

> +	chip->command = 0;

Even in an error case? Is it a problem?

> +	return ret;
> +}

...

> +static void isl76682_reset_action(void *data)
> +{
> +	isl76682_clear_configure_reg((struct isl76682_chip *)data);

Redundant casting, just name the field as you line, seems "chip" is what being
used elsewhere.

> +}

...

> +	i2c_set_clientdata(client, indio_dev);

How is this being used?

...

> +	chip->regmap = devm_regmap_init_i2c(client, &isl76682_regmap_config);
> +	if (IS_ERR(chip->regmap)) {
> +		return dev_err_probe(dev, PTR_ERR(chip->regmap),
> +				     "Error initializing regmap\n");
> +	}

Redundant {}

Also can be rewritten as

	chip->regmap = devm_regmap_init_i2c(client, &isl76682_regmap_config);
	ret = PTR_ERR_OR_ZERO(chip->regmap);
	if (ret)
		return dev_err_probe(dev, ret, "Error initializing regmap\n");

...

> +static const struct i2c_device_id isl76682_id[] = {
> +	{"isl76682", 0},

Unneeded 0.

> +	{}
> +};

...

> +static const struct of_device_id isl76682_of_match[] = {
> +	{ .compatible = "isil,isl76682", },
> +	{ },

Remove comma from the terminator.

> +};

...

> +

Redundant blank line.

> +module_i2c_driver(isl76682_driver);
Marek Vasut Nov. 21, 2023, 3:14 a.m. UTC | #2
On 11/20/23 13:02, Andy Shevchenko wrote:

[...]

>> +static int isl76682_clear_configure_reg(struct isl76682_chip *chip)
>> +{
>> +	struct device *dev = regmap_get_device(chip->regmap);
>> +	int ret;
>> +
>> +	ret = regmap_write(chip->regmap, ISL76682_REG_COMMAND, 0x0);
>> +	if (ret < 0)
>> +		dev_err(dev, "Error %d clearing the CONFIGURE register\n", ret);
> 
>> +	chip->command = 0;
> 
> Even in an error case? Is it a problem?

I added a comment in V4, if the I2C communication fails, hopefully the 
next time user reads data the command register will be rewritten again 
and the communication would have succeeded by then (assuming this was 
some weird glitch on the I2C bus). So this is best effort attempt to 
recover from that.

>> +static const struct of_device_id isl76682_of_match[] = {
>> +	{ .compatible = "isil,isl76682", },
>> +	{ },
> 
> Remove comma from the terminator.
> 
>> +};
> 
> ...
> 
>> +
> 
> Redundant blank line.
> 
>> +module_i2c_driver(isl76682_driver);

That ^ newline is above the module_i2c_driver or below it ?

I removed the one below .
Andy Shevchenko Nov. 21, 2023, 5:20 p.m. UTC | #3
On Tue, Nov 21, 2023 at 04:14:54AM +0100, Marek Vasut wrote:
> On 11/20/23 13:02, Andy Shevchenko wrote:

[...]

> > > +static int isl76682_clear_configure_reg(struct isl76682_chip *chip)
> > > +{
> > > +	struct device *dev = regmap_get_device(chip->regmap);
> > > +	int ret;
> > > +
> > > +	ret = regmap_write(chip->regmap, ISL76682_REG_COMMAND, 0x0);
> > > +	if (ret < 0)
> > > +		dev_err(dev, "Error %d clearing the CONFIGURE register\n", ret);
> > 
> > > +	chip->command = 0;
> > 
> > Even in an error case? Is it a problem?
> 
> I added a comment in V4, if the I2C communication fails, hopefully the next
> time user reads data the command register will be rewritten again and the
> communication would have succeeded by then (assuming this was some weird
> glitch on the I2C bus). So this is best effort attempt to recover from that.

OK.

...

> > > +
> > 
> > Redundant blank line.
> > 
> > > +module_i2c_driver(isl76682_driver);
> 
> That ^ newline is above the module_i2c_driver or below it ?
> 
> I removed the one below .

Hmm... Comment was clearly about above one (as you see a single + there).
Marek Vasut Nov. 21, 2023, 6:05 p.m. UTC | #4
On 11/21/23 18:20, Andy Shevchenko wrote:
> On Tue, Nov 21, 2023 at 04:14:54AM +0100, Marek Vasut wrote:
>> On 11/20/23 13:02, Andy Shevchenko wrote:
> 
> [...]
> 
>>>> +static int isl76682_clear_configure_reg(struct isl76682_chip *chip)
>>>> +{
>>>> +	struct device *dev = regmap_get_device(chip->regmap);
>>>> +	int ret;
>>>> +
>>>> +	ret = regmap_write(chip->regmap, ISL76682_REG_COMMAND, 0x0);
>>>> +	if (ret < 0)
>>>> +		dev_err(dev, "Error %d clearing the CONFIGURE register\n", ret);
>>>
>>>> +	chip->command = 0;
>>>
>>> Even in an error case? Is it a problem?
>>
>> I added a comment in V4, if the I2C communication fails, hopefully the next
>> time user reads data the command register will be rewritten again and the
>> communication would have succeeded by then (assuming this was some weird
>> glitch on the I2C bus). So this is best effort attempt to recover from that.
> 
> OK.
> 
> ...
> 
>>>> +
>>>
>>> Redundant blank line.
>>>
>>>> +module_i2c_driver(isl76682_driver);
>>
>> That ^ newline is above the module_i2c_driver or below it ?
>>
>> I removed the one below .
> 
> Hmm... Comment was clearly about above one (as you see a single + there).

I'll fix that up in V5 then, will wait a bit for further feedback before 
posting that one.
diff mbox series

Patch

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 45edba797e4c7..9e8cdc091556d 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -252,6 +252,21 @@  config ISL29125
 	  To compile this driver as a module, choose M here: the module will be
 	  called isl29125.
 
+config ISL76682
+	tristate "Intersil ISL76682 Light Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here if you want to build a driver for the Intersil ISL76682
+	  Ambient Light Sensor and IR Intensity sensor. This driver provides
+	  the readouts via standard IIO sysfs and device interface. Both ALS
+	  illuminance and IR illuminance are provided raw with separate scale
+	  setting which can be configured via sysfs, the default scale is 1000
+	  lux, other options are 4000/16000/64000 lux.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called isl76682.
+
 config HID_SENSOR_ALS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index c0db4c4c36ec9..09fa585f3109f 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_IQS621_ALS)	+= iqs621-als.o
 obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
 obj-$(CONFIG_SENSORS_ISL29028)	+= isl29028.o
 obj-$(CONFIG_ISL29125)		+= isl29125.o
+obj-$(CONFIG_ISL76682)		+= isl76682.o
 obj-$(CONFIG_JSA1212)		+= jsa1212.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_LTR501)		+= ltr501.o
diff --git a/drivers/iio/light/isl76682.c b/drivers/iio/light/isl76682.c
new file mode 100644
index 0000000000000..563652d978536
--- /dev/null
+++ b/drivers/iio/light/isl76682.c
@@ -0,0 +1,354 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * IIO driver for the light sensor ISL76682.
+ * ISL76682 is Ambient Light Sensor
+ *
+ * Copyright (c) 2023 Marek Vasut <marex@denx.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+
+#define ISL76682_REG_COMMAND			0x00
+
+#define ISL76682_COMMAND_EN			BIT(7)
+#define ISL76682_COMMAND_MODE_CONTINUOUS	BIT(6)
+#define ISL76682_COMMAND_LIGHT_IR		BIT(5)
+
+#define ISL76682_COMMAND_RANGE_LUX_1K		0x0
+#define ISL76682_COMMAND_RANGE_LUX_4K		0x1
+#define ISL76682_COMMAND_RANGE_LUX_16K		0x2
+#define ISL76682_COMMAND_RANGE_LUX_64K		0x3
+#define ISL76682_COMMAND_RANGE_LUX_MASK		GENMASK(1, 0)
+
+#define ISL76682_REG_ALSIR_L			0x01
+
+#define ISL76682_REG_ALSIR_U			0x02
+
+#define ISL76682_NUM_REGS			(ISL76682_REG_ALSIR_U + 1)
+
+#define ISL76682_CONV_TIME_MS			100
+#define ISL76682_INT_TIME_US			90000
+
+#define ISL76682_ADC_MAX			0xffff
+
+struct isl76682_chip {
+	/*
+	 * Lock to synchronize access to device command register
+	 * and the content of range variable below.
+	 */
+	struct mutex			lock;
+	struct regmap			*regmap;
+	u8				range;
+	u8				command;
+};
+
+struct isl76682_range {
+	u8				range;
+	u32				als;
+	u32				ir;
+};
+
+static struct isl76682_range isl76682_range_table[] = {
+	{ ISL76682_COMMAND_RANGE_LUX_1K, 15000, 10500 },
+	{ ISL76682_COMMAND_RANGE_LUX_4K, 60000, 42000 },
+	{ ISL76682_COMMAND_RANGE_LUX_16K, 240000, 168000 },
+	{ ISL76682_COMMAND_RANGE_LUX_64K, 960000, 673000 }
+};
+
+static int isl76682_get(struct isl76682_chip *chip, bool mode_ir, int *data)
+{
+	u8 command;
+	int ret;
+
+	command = ISL76682_COMMAND_EN | ISL76682_COMMAND_MODE_CONTINUOUS |
+		  chip->range;
+
+	if (mode_ir)
+		command |= ISL76682_COMMAND_LIGHT_IR;
+
+	if (command != chip->command) {
+		ret = regmap_write(chip->regmap, ISL76682_REG_COMMAND, command);
+		if (ret)
+			return ret;
+
+		/* Need to wait for conversion time if ALS/IR mode enabled */
+		msleep(ISL76682_CONV_TIME_MS);
+
+		chip->command = command;
+	}
+
+	ret = regmap_bulk_read(chip->regmap, ISL76682_REG_ALSIR_L, data, 2);
+	*data &= ISL76682_ADC_MAX;
+	return ret;
+}
+
+static int isl76682_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct isl76682_chip *chip = iio_priv(indio_dev);
+	int i;
+
+	if (chan->type != IIO_LIGHT && chan->type != IIO_INTENSITY)
+		return -EINVAL;
+
+	if (mask != IIO_CHAN_INFO_SCALE)
+		return -EINVAL;
+
+	if (val != 0)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(isl76682_range_table); i++) {
+		if (chan->type == IIO_LIGHT) {
+			if (val2 != isl76682_range_table[i].als)
+				continue;
+		} else if (chan->type == IIO_INTENSITY) {
+			if (val2 != isl76682_range_table[i].ir)
+				continue;
+		}
+
+		scoped_guard(mutex, &chip->lock)
+			chip->range = isl76682_range_table[i].range;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int isl76682_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct isl76682_chip *chip = iio_priv(indio_dev);
+	int ret = -EINVAL;
+	int i;
+
+	if (chan->type != IIO_LIGHT && chan->type != IIO_INTENSITY)
+		return -EINVAL;
+
+	guard(mutex)(&chip->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = isl76682_get(chip, false, val);
+			return (ret < 0) ? ret : IIO_VAL_INT;
+		case IIO_INTENSITY:
+			ret = isl76682_get(chip, true, val);
+			return (ret < 0) ? ret : IIO_VAL_INT;
+		default:
+			break;
+		}
+
+		return -EINVAL;
+	case IIO_CHAN_INFO_SCALE:
+		for (i = 0; i < ARRAY_SIZE(isl76682_range_table); i++) {
+			if (chip->range != isl76682_range_table[i].range)
+				continue;
+
+			*val = 0;
+			if (chan->type == IIO_LIGHT)
+				*val2 = isl76682_range_table[i].als;
+			else if (chan->type == IIO_INTENSITY)
+				*val2 = isl76682_range_table[i].ir;
+			else
+				return -EINVAL;
+
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+		return -EINVAL;
+	case IIO_CHAN_INFO_INT_TIME:
+		*val = 0;
+		*val2 = ISL76682_INT_TIME_US;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int illuminance_scale_available[] = {
+	0, 15000,
+	0, 60000,
+	0, 240000,
+	0, 960000
+};
+
+static int intensity_scale_available[] = {
+	0, 10500,
+	0, 42000,
+	0, 168000,
+	0, 673000
+};
+
+static int integration_time_available[] = { 0, ISL76682_INT_TIME_US };
+
+static int isl76682_read_avail(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       const int **vals, int *type,
+			       int *length, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_LIGHT) {
+			*vals = illuminance_scale_available;
+			*length = ARRAY_SIZE(illuminance_scale_available);
+			*type = IIO_VAL_INT_PLUS_MICRO;
+			return IIO_AVAIL_LIST;
+		} else if (chan->type == IIO_INTENSITY) {
+			*vals = intensity_scale_available;
+			*length = ARRAY_SIZE(intensity_scale_available);
+			*type = IIO_VAL_INT_PLUS_MICRO;
+			return IIO_AVAIL_LIST;
+		}
+		return -EINVAL;
+	case IIO_CHAN_INFO_INT_TIME:
+		*vals = integration_time_available;
+		*length = ARRAY_SIZE(integration_time_available);
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_chan_spec isl76682_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+	}, {
+		.type = IIO_INTENSITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+	}
+};
+
+static const struct iio_info isl76682_info = {
+	.read_avail	= isl76682_read_avail,
+	.read_raw	= isl76682_read_raw,
+	.write_raw	= isl76682_write_raw,
+};
+
+static int isl76682_clear_configure_reg(struct isl76682_chip *chip)
+{
+	struct device *dev = regmap_get_device(chip->regmap);
+	int ret;
+
+	ret = regmap_write(chip->regmap, ISL76682_REG_COMMAND, 0x0);
+	if (ret < 0)
+		dev_err(dev, "Error %d clearing the CONFIGURE register\n", ret);
+
+	chip->command = 0;
+
+	return ret;
+}
+
+static void isl76682_reset_action(void *data)
+{
+	isl76682_clear_configure_reg((struct isl76682_chip *)data);
+}
+
+static bool isl76682_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ISL76682_REG_ALSIR_L:
+	case ISL76682_REG_ALSIR_U:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config isl76682_regmap_config = {
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.volatile_reg		= isl76682_is_volatile_reg,
+	.max_register		= ISL76682_NUM_REGS - 1,
+	.num_reg_defaults_raw	= ISL76682_NUM_REGS,
+	.cache_type		= REGCACHE_FLAT,
+};
+
+static int isl76682_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct device *dev = &client->dev;
+	struct isl76682_chip *chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	mutex_init(&chip->lock);
+
+	chip->regmap = devm_regmap_init_i2c(client, &isl76682_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		return dev_err_probe(dev, PTR_ERR(chip->regmap),
+				     "Error initializing regmap\n");
+	}
+
+	chip->range = ISL76682_COMMAND_RANGE_LUX_1K;
+
+	ret = isl76682_clear_configure_reg(chip);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, isl76682_reset_action, chip);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &isl76682_info;
+	indio_dev->channels = isl76682_channels;
+	indio_dev->num_channels = ARRAY_SIZE(isl76682_channels);
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct i2c_device_id isl76682_id[] = {
+	{"isl76682", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, isl76682_id);
+
+static const struct of_device_id isl76682_of_match[] = {
+	{ .compatible = "isil,isl76682", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isl76682_of_match);
+
+static struct i2c_driver isl76682_driver = {
+	.driver  = {
+		.name		= "isl76682",
+		.of_match_table	= isl76682_of_match,
+	},
+	.probe		= isl76682_probe,
+	.id_table	= isl76682_id,
+};
+
+module_i2c_driver(isl76682_driver);
+
+MODULE_DESCRIPTION("ISL76682 Ambient Light Sensor driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");