| Message ID | 1700637042-11104-9-git-send-email-quic_cang@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
On Wed, 22 Nov 2023 at 09:11, Can Guo <quic_cang@quicinc.com> wrote: > > The registers, which are being touched in current SM8550 UFS PHY settings, > and the values being programmed are mainly the ones working for HS-G4 mode, > meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. > However, even consider HS-G4 mode only, some of them are incorrect and some > are missing. Rectify the HS-G4 PHY settings by strictly aligning with the > SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. > > Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support") > Signed-off-by: Can Guo <quic_cang@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 3 +++ > drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++------- > 2 files changed, 22 insertions(+), 9 deletions(-)
On 23-11-21 23:10:39, Can Guo wrote: > The registers, which are being touched in current SM8550 UFS PHY settings, > and the values being programmed are mainly the ones working for HS-G4 mode, > meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. > However, even consider HS-G4 mode only, some of them are incorrect and some > are missing. Rectify the HS-G4 PHY settings by strictly aligning with the > SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. > > Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support") > Signed-off-by: Can Guo <quic_cang@quicinc.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> > --- > .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 3 +++ > drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++------- > 2 files changed, 22 insertions(+), 9 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h > index 15bcb4b..674f158 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h > @@ -10,9 +10,12 @@ > #define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX 0x2c > #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30 > #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34 > +#define QSERDES_UFS_V6_TX_LANE_MODE_1 0x7c > +#define QSERDES_UFS_V6_TX_FR_DCC_CTRL 0x108 > > #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 > #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 > +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4 > #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 > #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 > #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c > index 3927eba..ad91f92 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c > @@ -658,22 +658,26 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { > QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), > QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), > QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), > - QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c), > - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), > - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), > - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), > - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99), > - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07), > + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), > + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), > + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), > + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14), > + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99), > + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), > +}; > + > +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { > + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), > }; > > static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { > - QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05), > + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), > QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), > + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), > }; > > static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { > - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c), > - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f), > + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), > QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), > > QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), > @@ -696,6 +700,8 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { > QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), > QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), > QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), > + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), > + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), > }; > > struct qmp_ufs_offsets { > @@ -1157,6 +1163,10 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { > .pcs = sm8550_ufsphy_pcs, > .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs), > }, > + .tbls_hs_b = { > + .serdes = sm8550_ufsphy_hs_b_serdes, > + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), > + }, > .clk_list = sdm845_ufs_phy_clk_l, > .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), > .vreg_list = qmp_phy_vreg_l, > -- > 2.7.4 >
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index 15bcb4b..674f158 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -10,9 +10,12 @@ #define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX 0x2c #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30 #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34 +#define QSERDES_UFS_V6_TX_LANE_MODE_1 0x7c +#define QSERDES_UFS_V6_TX_FR_DCC_CTRL 0x108 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 3927eba..ad91f92 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -658,22 +658,26 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), @@ -696,6 +700,8 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; struct qmp_ufs_offsets { @@ -1157,6 +1163,10 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .pcs = sm8550_ufsphy_pcs, .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs), }, + .tbls_hs_b = { + .serdes = sm8550_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l,
The registers, which are being touched in current SM8550 UFS PHY settings, and the values being programmed are mainly the ones working for HS-G4 mode, meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. However, even consider HS-G4 mode only, some of them are incorrect and some are missing. Rectify the HS-G4 PHY settings by strictly aligning with the SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support") Signed-off-by: Can Guo <quic_cang@quicinc.com> --- .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 3 +++ drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++------- 2 files changed, 22 insertions(+), 9 deletions(-)