diff mbox series

[v4,4/4] bus: mhi: host: Take irqsave lock after TRE is generated

Message ID 1699939661-7385-5-git-send-email-quic_qianyu@quicinc.com (mailing list archive)
State Superseded
Headers show
Series bus: mhi: host: Add lock to avoid race when ringing channel DB | expand

Commit Message

Qiang Yu Nov. 14, 2023, 5:27 a.m. UTC 
From: Hemant Kumar <quic_hemantk@quicinc.com>

If CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once __local_bh_
enable_ip is called as part of write_unlock_bh. Hence, let's take irqsave
lock after TRE is generated to avoid running write_unlock_bh when irqsave
lock is held.

Signed-off-by: Hemant Kumar <quic_hemantk@quicinc.com>
Signed-off-by: Lazarus Motha <quic_lmotha@quicinc.com>
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
---
 drivers/bus/mhi/host/main.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

Comments

Manivannan Sadhasivam Nov. 24, 2023, 10:09 a.m. UTC | #1 
On Tue, Nov 14, 2023 at 01:27:41PM +0800, Qiang Yu wrote:
> From: Hemant Kumar <quic_hemantk@quicinc.com>
> 
> If CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once __local_bh_
> enable_ip is called as part of write_unlock_bh. Hence, let's take irqsave

"__local_bh_enable_ip" is a function name, so you should not break it.

> lock after TRE is generated to avoid running write_unlock_bh when irqsave
> lock is held.
> 

I still don't understand this commit message. Where is the write_unlock_bh()
being called?

- Mani

> Signed-off-by: Hemant Kumar <quic_hemantk@quicinc.com>
> Signed-off-by: Lazarus Motha <quic_lmotha@quicinc.com>
> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> ---
>  drivers/bus/mhi/host/main.c | 13 +++++--------
>  1 file changed, 5 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
> index 33f27e2..d7abd0b 100644
> --- a/drivers/bus/mhi/host/main.c
> +++ b/drivers/bus/mhi/host/main.c
> @@ -1128,17 +1128,15 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
>  	if (unlikely(MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)))
>  		return -EIO;
>  
> -	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
> -
>  	ret = mhi_is_ring_full(mhi_cntrl, tre_ring);
> -	if (unlikely(ret)) {
> -		ret = -EAGAIN;
> -		goto exit_unlock;
> -	}
> +	if (unlikely(ret))
> +		return -EAGAIN;
>  
>  	ret = mhi_gen_tre(mhi_cntrl, mhi_chan, buf_info, mflags);
>  	if (unlikely(ret))
> -		goto exit_unlock;
> +		return ret;
> +
> +	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
>  
>  	/* Packet is queued, take a usage ref to exit M3 if necessary
>  	 * for host->device buffer, balanced put is done on buffer completion
> @@ -1158,7 +1156,6 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
>  	if (dir == DMA_FROM_DEVICE)
>  		mhi_cntrl->runtime_put(mhi_cntrl);
>  
> -exit_unlock:
>  	read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags);
>  
>  	return ret;
> -- 
> 2.7.4
> 
>
Qiang Yu Nov. 27, 2023, 7:19 a.m. UTC | #2 
On 11/24/2023 6:09 PM, Manivannan Sadhasivam wrote:
> On Tue, Nov 14, 2023 at 01:27:41PM +0800, Qiang Yu wrote:
>> From: Hemant Kumar <quic_hemantk@quicinc.com>
>>
>> If CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once __local_bh_
>> enable_ip is called as part of write_unlock_bh. Hence, let's take irqsave
> "__local_bh_enable_ip" is a function name, so you should not break it.
Thanks for let me know, will note this in following patch.
>
>> lock after TRE is generated to avoid running write_unlock_bh when irqsave
>> lock is held.
>>
> I still don't understand this commit message. Where is the write_unlock_bh()
> being called?
>
> - Mani
Write_unlock_bh() is invoked in mhi_gen_te()
The calling flow is like
mhi_queue
     read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
     mhi_gen_tre
         write_lock_bh(&mhi_chan->lock)
         write_unlock_bh(&mhi_chan->lock)   // Will enable irq if 
CONFIG_TRACE_IRQFLAGS is enabled
     read_lock_irqsave(&mhi_cntrl->pm_lock, flags)

after adding this patch, the calling flow becomes

mhi_queue
     mhi_gen_tre
         write_lock_bh(&mhi_chan->lock)
         write_unlock_bh(&mhi_chan->lock)
     read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
     read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
>
>> Signed-off-by: Hemant Kumar <quic_hemantk@quicinc.com>
>> Signed-off-by: Lazarus Motha <quic_lmotha@quicinc.com>
>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>> ---
>>   drivers/bus/mhi/host/main.c | 13 +++++--------
>>   1 file changed, 5 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
>> index 33f27e2..d7abd0b 100644
>> --- a/drivers/bus/mhi/host/main.c
>> +++ b/drivers/bus/mhi/host/main.c
>> @@ -1128,17 +1128,15 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
>>   	if (unlikely(MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)))
>>   		return -EIO;
>>   
>> -	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
>> -
>>   	ret = mhi_is_ring_full(mhi_cntrl, tre_ring);
>> -	if (unlikely(ret)) {
>> -		ret = -EAGAIN;
>> -		goto exit_unlock;
>> -	}
>> +	if (unlikely(ret))
>> +		return -EAGAIN;
>>   
>>   	ret = mhi_gen_tre(mhi_cntrl, mhi_chan, buf_info, mflags);
>>   	if (unlikely(ret))
>> -		goto exit_unlock;
>> +		return ret;
>> +
>> +	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
>>   
>>   	/* Packet is queued, take a usage ref to exit M3 if necessary
>>   	 * for host->device buffer, balanced put is done on buffer completion
>> @@ -1158,7 +1156,6 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
>>   	if (dir == DMA_FROM_DEVICE)
>>   		mhi_cntrl->runtime_put(mhi_cntrl);
>>   
>> -exit_unlock:
>>   	read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags);
>>   
>>   	return ret;
>> -- 
>> 2.7.4
>>
>>
Manivannan Sadhasivam Dec. 7, 2023, 6:38 a.m. UTC | #3 
On Mon, Nov 27, 2023 at 03:19:49PM +0800, Qiang Yu wrote:
> 
> On 11/24/2023 6:09 PM, Manivannan Sadhasivam wrote:
> > On Tue, Nov 14, 2023 at 01:27:41PM +0800, Qiang Yu wrote:
> > > From: Hemant Kumar <quic_hemantk@quicinc.com>
> > > 
> > > If CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once __local_bh_
> > > enable_ip is called as part of write_unlock_bh. Hence, let's take irqsave
> > "__local_bh_enable_ip" is a function name, so you should not break it.
> Thanks for let me know, will note this in following patch.
> > 
> > > lock after TRE is generated to avoid running write_unlock_bh when irqsave
> > > lock is held.
> > > 
> > I still don't understand this commit message. Where is the write_unlock_bh()
> > being called?
> > 
> > - Mani
> Write_unlock_bh() is invoked in mhi_gen_te()
> The calling flow is like
> mhi_queue
>     read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
>     mhi_gen_tre
>         write_lock_bh(&mhi_chan->lock)
>         write_unlock_bh(&mhi_chan->lock)   // Will enable irq if
> CONFIG_TRACE_IRQFLAGS is enabled
>     read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
> 
> after adding this patch, the calling flow becomes
> 
> mhi_queue
>     mhi_gen_tre
>         write_lock_bh(&mhi_chan->lock)
>         write_unlock_bh(&mhi_chan->lock)
>     read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
>     read_lock_irqsave(&mhi_cntrl->pm_lock, flags)

So this patch essentially fixes the issue caused by patch 1? If so, this should
be squashed into patch 1.

- Mani

> > 
> > > Signed-off-by: Hemant Kumar <quic_hemantk@quicinc.com>
> > > Signed-off-by: Lazarus Motha <quic_lmotha@quicinc.com>
> > > Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> > > ---
> > >   drivers/bus/mhi/host/main.c | 13 +++++--------
> > >   1 file changed, 5 insertions(+), 8 deletions(-)
> > > 
> > > diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
> > > index 33f27e2..d7abd0b 100644
> > > --- a/drivers/bus/mhi/host/main.c
> > > +++ b/drivers/bus/mhi/host/main.c
> > > @@ -1128,17 +1128,15 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
> > >   	if (unlikely(MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)))
> > >   		return -EIO;
> > > -	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
> > > -
> > >   	ret = mhi_is_ring_full(mhi_cntrl, tre_ring);
> > > -	if (unlikely(ret)) {
> > > -		ret = -EAGAIN;
> > > -		goto exit_unlock;
> > > -	}
> > > +	if (unlikely(ret))
> > > +		return -EAGAIN;
> > >   	ret = mhi_gen_tre(mhi_cntrl, mhi_chan, buf_info, mflags);
> > >   	if (unlikely(ret))
> > > -		goto exit_unlock;
> > > +		return ret;
> > > +
> > > +	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
> > >   	/* Packet is queued, take a usage ref to exit M3 if necessary
> > >   	 * for host->device buffer, balanced put is done on buffer completion
> > > @@ -1158,7 +1156,6 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
> > >   	if (dir == DMA_FROM_DEVICE)
> > >   		mhi_cntrl->runtime_put(mhi_cntrl);
> > > -exit_unlock:
> > >   	read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags);
> > >   	return ret;
> > > -- 
> > > 2.7.4
> > > 
> > > 
>
Qiang Yu Dec. 7, 2023, 9:20 a.m. UTC | #4 
On 12/7/2023 2:38 PM, Manivannan Sadhasivam wrote:
> On Mon, Nov 27, 2023 at 03:19:49PM +0800, Qiang Yu wrote:
>> On 11/24/2023 6:09 PM, Manivannan Sadhasivam wrote:
>>> On Tue, Nov 14, 2023 at 01:27:41PM +0800, Qiang Yu wrote:
>>>> From: Hemant Kumar <quic_hemantk@quicinc.com>
>>>>
>>>> If CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once __local_bh_
>>>> enable_ip is called as part of write_unlock_bh. Hence, let's take irqsave
>>> "__local_bh_enable_ip" is a function name, so you should not break it.
>> Thanks for let me know, will note this in following patch.
>>>> lock after TRE is generated to avoid running write_unlock_bh when irqsave
>>>> lock is held.
>>>>
>>> I still don't understand this commit message. Where is the write_unlock_bh()
>>> being called?
>>>
>>> - Mani
>> Write_unlock_bh() is invoked in mhi_gen_te()
>> The calling flow is like
>> mhi_queue
>>      read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
>>      mhi_gen_tre
>>          write_lock_bh(&mhi_chan->lock)
>>          write_unlock_bh(&mhi_chan->lock)   // Will enable irq if
>> CONFIG_TRACE_IRQFLAGS is enabled
>>      read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
>>
>> after adding this patch, the calling flow becomes
>>
>> mhi_queue
>>      mhi_gen_tre
>>          write_lock_bh(&mhi_chan->lock)
>>          write_unlock_bh(&mhi_chan->lock)
>>      read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
>>      read_lock_irqsave(&mhi_cntrl->pm_lock, flags)
> So this patch essentially fixes the issue caused by patch 1? If so, this should
> be squashed into patch 1.
>
> - Mani

Yes, this patch is to fix the issue caused by patch 1. Will squash patch 
1 and this patch into one patch

in next version.

>
>>>> Signed-off-by: Hemant Kumar <quic_hemantk@quicinc.com>
>>>> Signed-off-by: Lazarus Motha <quic_lmotha@quicinc.com>
>>>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>>>> ---
>>>>    drivers/bus/mhi/host/main.c | 13 +++++--------
>>>>    1 file changed, 5 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
>>>> index 33f27e2..d7abd0b 100644
>>>> --- a/drivers/bus/mhi/host/main.c
>>>> +++ b/drivers/bus/mhi/host/main.c
>>>> @@ -1128,17 +1128,15 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
>>>>    	if (unlikely(MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)))
>>>>    		return -EIO;
>>>> -	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
>>>> -
>>>>    	ret = mhi_is_ring_full(mhi_cntrl, tre_ring);
>>>> -	if (unlikely(ret)) {
>>>> -		ret = -EAGAIN;
>>>> -		goto exit_unlock;
>>>> -	}
>>>> +	if (unlikely(ret))
>>>> +		return -EAGAIN;
>>>>    	ret = mhi_gen_tre(mhi_cntrl, mhi_chan, buf_info, mflags);
>>>>    	if (unlikely(ret))
>>>> -		goto exit_unlock;
>>>> +		return ret;
>>>> +
>>>> +	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
>>>>    	/* Packet is queued, take a usage ref to exit M3 if necessary
>>>>    	 * for host->device buffer, balanced put is done on buffer completion
>>>> @@ -1158,7 +1156,6 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
>>>>    	if (dir == DMA_FROM_DEVICE)
>>>>    		mhi_cntrl->runtime_put(mhi_cntrl);
>>>> -exit_unlock:
>>>>    	read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags);
>>>>    	return ret;
>>>> -- 
>>>> 2.7.4
>>>>
>>>>
diff mbox series

Patch

diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
index 33f27e2..d7abd0b 100644
--- a/drivers/bus/mhi/host/main.c
+++ b/drivers/bus/mhi/host/main.c
@@ -1128,17 +1128,15 @@  static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
 	if (unlikely(MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)))
 		return -EIO;
 
-	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
-
 	ret = mhi_is_ring_full(mhi_cntrl, tre_ring);
-	if (unlikely(ret)) {
-		ret = -EAGAIN;
-		goto exit_unlock;
-	}
+	if (unlikely(ret))
+		return -EAGAIN;
 
 	ret = mhi_gen_tre(mhi_cntrl, mhi_chan, buf_info, mflags);
 	if (unlikely(ret))
-		goto exit_unlock;
+		return ret;
+
+	read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
 
 	/* Packet is queued, take a usage ref to exit M3 if necessary
 	 * for host->device buffer, balanced put is done on buffer completion
@@ -1158,7 +1156,6 @@  static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
 	if (dir == DMA_FROM_DEVICE)
 		mhi_cntrl->runtime_put(mhi_cntrl);
 
-exit_unlock:
 	read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags);
 
 	return ret;