| Message ID | 20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-11-95256ed139e6@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/meson: add support for MIPI DSI Display | expand |
Hi, On Fri, Nov 24, 2023 at 09:41:22AM +0100, Neil Armstrong wrote: > This add nodes to support the Khadas TS050 panel on the > Khadas VIM3 & VIM3L boards. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 2 +- > arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 74 ++++++++++++++++++++++ > .../boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 2 +- > 3 files changed, 76 insertions(+), 2 deletions(-) Generally, those kind of patches still have value. Now that we are accepting overlays, could this be converted to one and merged maybe? Maxime
Hi, On 24/11/2023 11:52, Maxime Ripard wrote: > Hi, > > On Fri, Nov 24, 2023 at 09:41:22AM +0100, Neil Armstrong wrote: >> This add nodes to support the Khadas TS050 panel on the >> Khadas VIM3 & VIM3L boards. >> >> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> >> --- >> .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 2 +- >> arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 74 ++++++++++++++++++++++ >> .../boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 2 +- >> 3 files changed, 76 insertions(+), 2 deletions(-) > > Generally, those kind of patches still have value. Now that we are > accepting overlays, could this be converted to one and merged maybe? Yep I was thinking about that, I'll probably do that, some new boards will also need overlays for DSI panels. I'll probably switch to an overlay on v10. Neil > > Maxime
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi index 16dd409051b4..81c3057143b4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi @@ -98,7 +98,7 @@ &pwm_ab { }; &pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; clock-names = "clkin1"; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 514a6dd4b124..aafc37863f2e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -40,6 +40,14 @@ button-function { }; }; + panel_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm_AO_cd 0 25000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <200>; + }; + leds { compatible = "gpio-leds"; @@ -358,6 +366,23 @@ rtc: rtc@51 { }; }; +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + touch-controller@38 { + compatible = "edt,edt-ft5206"; + reg = <0x38>; + interrupt-parent = <&gpio_intc>; + interrupts = <66 IRQ_TYPE_EDGE_FALLING>; /* GPIOA_5 */ + reset-gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + status = "okay"; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -365,6 +390,55 @@ &ir { linux,rc-map-name = "rc-khadas"; }; +&mipi_dsi { + status = "okay"; + + assigned-clocks = <&clkc CLKID_GP0_PLL>, + <&clkc CLKID_MIPI_DSI_PXCLK_SEL>, + <&clkc CLKID_MIPI_DSI_PXCLK>, + <&clkc CLKID_CTS_ENCL_SEL>, + <&clkc CLKID_VCLK2_SEL>; + assigned-clock-parents = <0>, + <&clkc CLKID_GP0_PLL>, + <0>, + <&clkc CLKID_VCLK2_DIV1>, + <&clkc CLKID_GP0_PLL>; + assigned-clock-rates = <960000000>, + <0>, + <960000000>, + <0>, + <0>; + + panel@0 { + compatible = "khadas,ts050"; + reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; + power-supply = <&vcc_3v3>; + backlight = <&panel_backlight>; + reg = <0>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&mipi_analog_dphy { + status = "okay"; +}; + +&mipi_dphy { + status = "okay"; +}; + +&mipi_dsi_panel_port { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + &pcie { reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index 9c0b544e2209..cb52a55ab70a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -76,7 +76,7 @@ &cpu3 { }; &pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; clock-names = "clkin1";
This add nodes to support the Khadas TS050 panel on the Khadas VIM3 & VIM3L boards. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 2 +- arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 74 ++++++++++++++++++++++ .../boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 2 +- 3 files changed, 76 insertions(+), 2 deletions(-)