| Message ID | 20231121115251.588436-1-lishifeng1992@126.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v2] net/mlx5e: Fix a race in command alloc flow | expand |
On Tue, Nov 21, 2023 at 03:52:51AM -0800, Shifeng Li wrote: > Fix a cmd->ent use after free due to a race on command entry. > Such race occurs when one of the commands releases its last refcount and > frees its index and entry while another process running command flush > flow takes refcount to this command entry. The process which handles > commands flush may see this command as needed to be flushed if the other > process allocated a ent->idx but didn't set ent to cmd->ent_arr in > cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into > the spin lock. > > [70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] > [70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361 > [70013.081968] > [70013.081989] CPU: 26 PID: 1433361 Comm: kworker/26:1 Kdump: loaded Tainted: G OE 4.19.90-25.17.v2101.osc.sfc.6.10.0.0030.ky10.x86_64+debug #1 > [70013.082001] Hardware name: SANGFOR 65N32-US/ASERVER-G-2605, BIOS SSSS5203 08/19/2020 > [70013.082028] Workqueue: events aer_isr > [70013.082053] Call Trace: > [70013.082067] dump_stack+0x8b/0xbb > [70013.082086] print_address_description+0x6a/0x270 > [70013.082102] kasan_report+0x179/0x2c0 > [70013.082133] ? mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] > [70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] > [70013.082213] ? mlx5_cmd_use_polling+0x20/0x20 [mlx5_core] > [70013.082223] ? kmem_cache_free+0x1ad/0x1e0 > [70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core] > [70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core] > [70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core] > [70013.082377] remove_one+0x200/0x2b0 [mlx5_core] > [70013.082390] ? __pm_runtime_resume+0x58/0x70 > [70013.082409] pci_device_remove+0xf3/0x280 > [70013.082426] ? pcibios_free_irq+0x10/0x10 > [70013.082439] device_release_driver_internal+0x1c3/0x470 > [70013.082453] pci_stop_bus_device+0x109/0x160 > [70013.082468] pci_stop_and_remove_bus_device+0xe/0x20 > [70013.082485] pcie_do_fatal_recovery+0x167/0x550 > [70013.082493] aer_isr+0x7d2/0x960 > [70013.082510] ? aer_get_device_error_info+0x420/0x420 > [70013.082526] ? __schedule+0x821/0x2040 > [70013.082536] ? strscpy+0x85/0x180 > [70013.082543] process_one_work+0x65f/0x12d0 > [70013.082556] worker_thread+0x87/0xb50 > [70013.082563] ? __kthread_parkme+0x82/0xf0 > [70013.082569] ? process_one_work+0x12d0/0x12d0 > [70013.082571] kthread+0x2e9/0x3a0 > [70013.082579] ? kthread_create_worker_on_cpu+0xc0/0xc0 > [70013.082592] ret_from_fork+0x1f/0x40 I'm curious how did you get this error? I would expect to see some sort of lock in upper level which prevents it. Thanks
On 2023/11/22 20:02, Leon Romanovsky wrote: > On Tue, Nov 21, 2023 at 03:52:51AM -0800, Shifeng Li wrote: >> Fix a cmd->ent use after free due to a race on command entry. >> Such race occurs when one of the commands releases its last refcount and >> frees its index and entry while another process running command flush >> flow takes refcount to this command entry. The process which handles >> commands flush may see this command as needed to be flushed if the other >> process allocated a ent->idx but didn't set ent to cmd->ent_arr in >> cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into >> the spin lock. >> >> [70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] >> [70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361 >> [70013.081968] >> [70013.081989] CPU: 26 PID: 1433361 Comm: kworker/26:1 Kdump: loaded Tainted: G OE 4.19.90-25.17.v2101.osc.sfc.6.10.0.0030.ky10.x86_64+debug #1 >> [70013.082001] Hardware name: SANGFOR 65N32-US/ASERVER-G-2605, BIOS SSSS5203 08/19/2020 >> [70013.082028] Workqueue: events aer_isr >> [70013.082053] Call Trace: >> [70013.082067] dump_stack+0x8b/0xbb >> [70013.082086] print_address_description+0x6a/0x270 >> [70013.082102] kasan_report+0x179/0x2c0 >> [70013.082133] ? mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] >> [70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] >> [70013.082213] ? mlx5_cmd_use_polling+0x20/0x20 [mlx5_core] >> [70013.082223] ? kmem_cache_free+0x1ad/0x1e0 >> [70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core] >> [70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core] >> [70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core] >> [70013.082377] remove_one+0x200/0x2b0 [mlx5_core] >> [70013.082390] ? __pm_runtime_resume+0x58/0x70 >> [70013.082409] pci_device_remove+0xf3/0x280 >> [70013.082426] ? pcibios_free_irq+0x10/0x10 >> [70013.082439] device_release_driver_internal+0x1c3/0x470 >> [70013.082453] pci_stop_bus_device+0x109/0x160 >> [70013.082468] pci_stop_and_remove_bus_device+0xe/0x20 >> [70013.082485] pcie_do_fatal_recovery+0x167/0x550 >> [70013.082493] aer_isr+0x7d2/0x960 >> [70013.082510] ? aer_get_device_error_info+0x420/0x420 >> [70013.082526] ? __schedule+0x821/0x2040 >> [70013.082536] ? strscpy+0x85/0x180 >> [70013.082543] process_one_work+0x65f/0x12d0 >> [70013.082556] worker_thread+0x87/0xb50 >> [70013.082563] ? __kthread_parkme+0x82/0xf0 >> [70013.082569] ? process_one_work+0x12d0/0x12d0 >> [70013.082571] kthread+0x2e9/0x3a0 >> [70013.082579] ? kthread_create_worker_on_cpu+0xc0/0xc0 >> [70013.082592] ret_from_fork+0x1f/0x40 > > I'm curious how did you get this error? I would expect to see some sort > of lock in upper level which prevents it. > Just inject AER unrecoverable error to pci BDF device corresponding to the network card constantly and I get this error. Thanks > Thanks
On 2023/11/22 20:02, Leon Romanovsky wrote: > On Tue, Nov 21, 2023 at 03:52:51AM -0800, Shifeng Li wrote: >> Fix a cmd->ent use after free due to a race on command entry. >> Such race occurs when one of the commands releases its last refcount and >> frees its index and entry while another process running command flush >> flow takes refcount to this command entry. The process which handles >> commands flush may see this command as needed to be flushed if the other >> process allocated a ent->idx but didn't set ent to cmd->ent_arr in >> cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into >> the spin lock. >> >> [70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] >> [70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361 >> [70013.081968] >> [70013.081989] CPU: 26 PID: 1433361 Comm: kworker/26:1 Kdump: loaded Tainted: G OE 4.19.90-25.17.v2101.osc.sfc.6.10.0.0030.ky10.x86_64+debug #1 >> [70013.082001] Hardware name: SANGFOR 65N32-US/ASERVER-G-2605, BIOS SSSS5203 08/19/2020 >> [70013.082028] Workqueue: events aer_isr >> [70013.082053] Call Trace: >> [70013.082067] dump_stack+0x8b/0xbb >> [70013.082086] print_address_description+0x6a/0x270 >> [70013.082102] kasan_report+0x179/0x2c0 >> [70013.082133] ? mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] >> [70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] >> [70013.082213] ? mlx5_cmd_use_polling+0x20/0x20 [mlx5_core] >> [70013.082223] ? kmem_cache_free+0x1ad/0x1e0 >> [70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core] >> [70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core] >> [70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core] >> [70013.082377] remove_one+0x200/0x2b0 [mlx5_core] >> [70013.082390] ? __pm_runtime_resume+0x58/0x70 >> [70013.082409] pci_device_remove+0xf3/0x280 >> [70013.082426] ? pcibios_free_irq+0x10/0x10 >> [70013.082439] device_release_driver_internal+0x1c3/0x470 >> [70013.082453] pci_stop_bus_device+0x109/0x160 >> [70013.082468] pci_stop_and_remove_bus_device+0xe/0x20 >> [70013.082485] pcie_do_fatal_recovery+0x167/0x550 >> [70013.082493] aer_isr+0x7d2/0x960 >> [70013.082510] ? aer_get_device_error_info+0x420/0x420 >> [70013.082526] ? __schedule+0x821/0x2040 >> [70013.082536] ? strscpy+0x85/0x180 >> [70013.082543] process_one_work+0x65f/0x12d0 >> [70013.082556] worker_thread+0x87/0xb50 >> [70013.082563] ? __kthread_parkme+0x82/0xf0 >> [70013.082569] ? process_one_work+0x12d0/0x12d0 >> [70013.082571] kthread+0x2e9/0x3a0 >> [70013.082579] ? kthread_create_worker_on_cpu+0xc0/0xc0 >> [70013.082592] ret_from_fork+0x1f/0x40 > > I'm curious how did you get this error? I would expect to see some sort > of lock in upper level which prevents it. > The logical relationship of this error is as follows: aer_recover_work | ent->work ------------------------------------------------------+--------------------------------- aer_recover_work_func | |- pcie_do_recovery | |- report_error_detected | |- mlx5_pci_err_detected |cmd_work_handler |- mlx5_enter_error_state | |- cmd_alloc_index |- enter_error_state | |- lock cmd->alloc_lock |- mlx5_cmd_flush | |- clear_bit |- mlx5_cmd_trigger_completions | |- unlock cmd->alloc_lock |- lock cmd->alloc_lock | |- vector = ~dev->cmd.vars.bitmask | |- for_each_set_bit | |- cmd_ent_get(cmd->ent_arr[i]) (UAF) | |- unlock cmd->alloc_lock | |- cmd->ent_arr[ent->idx] = ent The cmd->ent_arr[ent->idx] assignment and the bit clearing are not protected by the cmd->alloc_lock in cmd_work_handler(). > Thanks
On 11/21/2023 1:52 PM, Shifeng Li wrote: > Fix a cmd->ent use after free due to a race on command entry. > Such race occurs when one of the commands releases its last refcount and > frees its index and entry while another process running command flush > flow takes refcount to this command entry. The process which handles > commands flush may see this command as needed to be flushed if the other > process allocated a ent->idx but didn't set ent to cmd->ent_arr in > cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into > the spin lock. > > [70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] > [70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361 > [70013.081968] > [70013.081989] CPU: 26 PID: 1433361 Comm: kworker/26:1 Kdump: loaded Tainted: G OE 4.19.90-25.17.v2101.osc.sfc.6.10.0.0030.ky10.x86_64+debug #1 > [70013.082001] Hardware name: SANGFOR 65N32-US/ASERVER-G-2605, BIOS SSSS5203 08/19/2020 > [70013.082028] Workqueue: events aer_isr > [70013.082053] Call Trace: > [70013.082067] dump_stack+0x8b/0xbb > [70013.082086] print_address_description+0x6a/0x270 > [70013.082102] kasan_report+0x179/0x2c0 > [70013.082133] ? mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] > [70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] > [70013.082213] ? mlx5_cmd_use_polling+0x20/0x20 [mlx5_core] > [70013.082223] ? kmem_cache_free+0x1ad/0x1e0 > [70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core] > [70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core] > [70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core] > [70013.082377] remove_one+0x200/0x2b0 [mlx5_core] > [70013.082390] ? __pm_runtime_resume+0x58/0x70 > [70013.082409] pci_device_remove+0xf3/0x280 > [70013.082426] ? pcibios_free_irq+0x10/0x10 > [70013.082439] device_release_driver_internal+0x1c3/0x470 > [70013.082453] pci_stop_bus_device+0x109/0x160 > [70013.082468] pci_stop_and_remove_bus_device+0xe/0x20 > [70013.082485] pcie_do_fatal_recovery+0x167/0x550 > [70013.082493] aer_isr+0x7d2/0x960 > [70013.082510] ? aer_get_device_error_info+0x420/0x420 > [70013.082526] ? __schedule+0x821/0x2040 > [70013.082536] ? strscpy+0x85/0x180 > [70013.082543] process_one_work+0x65f/0x12d0 > [70013.082556] worker_thread+0x87/0xb50 > [70013.082563] ? __kthread_parkme+0x82/0xf0 > [70013.082569] ? process_one_work+0x12d0/0x12d0 > [70013.082571] kthread+0x2e9/0x3a0 > [70013.082579] ? kthread_create_worker_on_cpu+0xc0/0xc0 > [70013.082592] ret_from_fork+0x1f/0x40 > > Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") > Signed-off-by: Shifeng Li<lishifeng1992@126.com> Fixes tag should be : Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler") Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Thanks!
On 2023/11/27 0:13, Moshe Shemesh wrote: > > > On 11/21/2023 1:52 PM, Shifeng Li wrote: >> Fix a cmd->ent use after free due to a race on command entry. >> Such race occurs when one of the commands releases its last refcount and >> frees its index and entry while another process running command flush >> flow takes refcount to this command entry. The process which handles >> commands flush may see this command as needed to be flushed if the other >> process allocated a ent->idx but didn't set ent to cmd->ent_arr in >> cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into >> the spin lock. >> >> [70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] >> [70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361 >> [70013.081968] >> [70013.081989] CPU: 26 PID: 1433361 Comm: kworker/26:1 Kdump: loaded Tainted: G OE 4.19.90-25.17.v2101.osc.sfc.6.10.0.0030.ky10.x86_64+debug #1 >> [70013.082001] Hardware name: SANGFOR 65N32-US/ASERVER-G-2605, BIOS SSSS5203 08/19/2020 >> [70013.082028] Workqueue: events aer_isr >> [70013.082053] Call Trace: >> [70013.082067] dump_stack+0x8b/0xbb >> [70013.082086] print_address_description+0x6a/0x270 >> [70013.082102] kasan_report+0x179/0x2c0 >> [70013.082133] ? mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] >> [70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] >> [70013.082213] ? mlx5_cmd_use_polling+0x20/0x20 [mlx5_core] >> [70013.082223] ? kmem_cache_free+0x1ad/0x1e0 >> [70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core] >> [70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core] >> [70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core] >> [70013.082377] remove_one+0x200/0x2b0 [mlx5_core] >> [70013.082390] ? __pm_runtime_resume+0x58/0x70 >> [70013.082409] pci_device_remove+0xf3/0x280 >> [70013.082426] ? pcibios_free_irq+0x10/0x10 >> [70013.082439] device_release_driver_internal+0x1c3/0x470 >> [70013.082453] pci_stop_bus_device+0x109/0x160 >> [70013.082468] pci_stop_and_remove_bus_device+0xe/0x20 >> [70013.082485] pcie_do_fatal_recovery+0x167/0x550 >> [70013.082493] aer_isr+0x7d2/0x960 >> [70013.082510] ? aer_get_device_error_info+0x420/0x420 >> [70013.082526] ? __schedule+0x821/0x2040 >> [70013.082536] ? strscpy+0x85/0x180 >> [70013.082543] process_one_work+0x65f/0x12d0 >> [70013.082556] worker_thread+0x87/0xb50 >> [70013.082563] ? __kthread_parkme+0x82/0xf0 >> [70013.082569] ? process_one_work+0x12d0/0x12d0 >> [70013.082571] kthread+0x2e9/0x3a0 >> [70013.082579] ? kthread_create_worker_on_cpu+0xc0/0xc0 >> [70013.082592] ret_from_fork+0x1f/0x40 >> >> Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") >> Signed-off-by: Shifeng Li<lishifeng1992@126.com> > > Fixes tag should be : > Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler") > > Reviewed-by: Moshe Shemesh <moshe@nvidia.com> > I have sent v3. Thanks! > Thanks!
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index f8f0a712c943..a7b1f9686c09 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -156,15 +156,18 @@ static u8 alloc_token(struct mlx5_cmd *cmd) return token; } -static int cmd_alloc_index(struct mlx5_cmd *cmd) +static int cmd_alloc_index(struct mlx5_cmd *cmd, struct mlx5_cmd_work_ent *ent) { unsigned long flags; int ret; spin_lock_irqsave(&cmd->alloc_lock, flags); ret = find_first_bit(&cmd->vars.bitmask, cmd->vars.max_reg_cmds); - if (ret < cmd->vars.max_reg_cmds) + if (ret < cmd->vars.max_reg_cmds) { clear_bit(ret, &cmd->vars.bitmask); + ent->idx = ret; + cmd->ent_arr[ent->idx] = ent; + } spin_unlock_irqrestore(&cmd->alloc_lock, flags); return ret < cmd->vars.max_reg_cmds ? ret : -ENOMEM; @@ -979,7 +982,7 @@ static void cmd_work_handler(struct work_struct *work) sem = ent->page_queue ? &cmd->vars.pages_sem : &cmd->vars.sem; down(sem); if (!ent->page_queue) { - alloc_ret = cmd_alloc_index(cmd); + alloc_ret = cmd_alloc_index(cmd, ent); if (alloc_ret < 0) { mlx5_core_err_rl(dev, "failed to allocate command entry\n"); if (ent->callback) { @@ -994,15 +997,14 @@ static void cmd_work_handler(struct work_struct *work) up(sem); return; } - ent->idx = alloc_ret; } else { ent->idx = cmd->vars.max_reg_cmds; spin_lock_irqsave(&cmd->alloc_lock, flags); clear_bit(ent->idx, &cmd->vars.bitmask); + cmd->ent_arr[ent->idx] = ent; spin_unlock_irqrestore(&cmd->alloc_lock, flags); } - cmd->ent_arr[ent->idx] = ent; lay = get_inst(cmd, ent->idx); ent->lay = lay; memset(lay, 0, sizeof(*lay));
Fix a cmd->ent use after free due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process allocated a ent->idx but didn't set ent to cmd->ent_arr in cmd_work_handler(). Fix it by moving the assignment of cmd->ent_arr into the spin lock. [70013.081955] BUG: KASAN: use-after-free in mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] [70013.081967] Write of size 4 at addr ffff88880b1510b4 by task kworker/26:1/1433361 [70013.081968] [70013.081989] CPU: 26 PID: 1433361 Comm: kworker/26:1 Kdump: loaded Tainted: G OE 4.19.90-25.17.v2101.osc.sfc.6.10.0.0030.ky10.x86_64+debug #1 [70013.082001] Hardware name: SANGFOR 65N32-US/ASERVER-G-2605, BIOS SSSS5203 08/19/2020 [70013.082028] Workqueue: events aer_isr [70013.082053] Call Trace: [70013.082067] dump_stack+0x8b/0xbb [70013.082086] print_address_description+0x6a/0x270 [70013.082102] kasan_report+0x179/0x2c0 [70013.082133] ? mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] [70013.082173] mlx5_cmd_trigger_completions+0x1e2/0x4c0 [mlx5_core] [70013.082213] ? mlx5_cmd_use_polling+0x20/0x20 [mlx5_core] [70013.082223] ? kmem_cache_free+0x1ad/0x1e0 [70013.082267] mlx5_cmd_flush+0x80/0x180 [mlx5_core] [70013.082304] mlx5_enter_error_state+0x106/0x1d0 [mlx5_core] [70013.082338] mlx5_try_fast_unload+0x2ea/0x4d0 [mlx5_core] [70013.082377] remove_one+0x200/0x2b0 [mlx5_core] [70013.082390] ? __pm_runtime_resume+0x58/0x70 [70013.082409] pci_device_remove+0xf3/0x280 [70013.082426] ? pcibios_free_irq+0x10/0x10 [70013.082439] device_release_driver_internal+0x1c3/0x470 [70013.082453] pci_stop_bus_device+0x109/0x160 [70013.082468] pci_stop_and_remove_bus_device+0xe/0x20 [70013.082485] pcie_do_fatal_recovery+0x167/0x550 [70013.082493] aer_isr+0x7d2/0x960 [70013.082510] ? aer_get_device_error_info+0x420/0x420 [70013.082526] ? __schedule+0x821/0x2040 [70013.082536] ? strscpy+0x85/0x180 [70013.082543] process_one_work+0x65f/0x12d0 [70013.082556] worker_thread+0x87/0xb50 [70013.082563] ? __kthread_parkme+0x82/0xf0 [70013.082569] ? process_one_work+0x12d0/0x12d0 [70013.082571] kthread+0x2e9/0x3a0 [70013.082579] ? kthread_create_worker_on_cpu+0xc0/0xc0 [70013.082592] ret_from_fork+0x1f/0x40 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Shifeng Li <lishifeng1992@126.com> --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) --- v1->v2: fix code conflicts.