diff mbox series

[v3,2/3] arm64: dts: imx93: Configure clock rate for audio PLL

Message ID 20231122101959.30264-3-chancel.liu@nxp.com (mailing list archive)
State New, archived
Headers show
Series Add audio device nodes for i.MX93 platform | expand

Commit Message

Chancel Liu Nov. 22, 2023, 10:19 a.m. UTC 
Configure clock rate for audio PLL. There's one audio PLL on i.MX93. It
is used as parent clock for clocks that are multiple of 8kHz.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 2 ++
 1 file changed, 2 insertions(+)

Comments

Shawn Guo Nov. 27, 2023, 1:28 a.m. UTC | #1 
On Wed, Nov 22, 2023 at 06:19:58PM +0800, Chancel Liu wrote:
> Configure clock rate for audio PLL. There's one audio PLL on i.MX93. It
> is used as parent clock for clocks that are multiple of 8kHz.
> 
> Signed-off-by: Chancel Liu <chancel.liu@nxp.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 9a7bff39519c..e6745801308e 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -420,6 +420,8 @@  clk: clock-controller@44450000 {
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
 				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+				assigned-clock-rates = <393216000>;
 				status = "okay";
 			};