@@ -725,6 +725,8 @@ ecspi4: spi@30630000 {
clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
<&clks IMX7D_ECSPI4_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
status = "disabled";
};
@@ -880,6 +882,8 @@ ecspi1: spi@30820000 {
clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
<&clks IMX7D_ECSPI1_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
status = "disabled";
};
@@ -892,6 +896,8 @@ ecspi2: spi@30830000 {
clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
<&clks IMX7D_ECSPI2_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
status = "disabled";
};
@@ -904,6 +910,8 @@ ecspi3: spi@30840000 {
clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
<&clks IMX7D_ECSPI3_ROOT_CLK>;
clock-names = "ipg", "per";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
status = "disabled";
};
This adds the rx/tx DMA channels for CSPI peripherals. Channel numbers are taken from i.MX7D RM Rev1 01/2018. Peripheral types ID (7) is selected according to fsl,imx-sdma.yaml and is similar to i.MX6 and i.MX8M platforms. Same goes for transfer priority ID (last number). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- Tested on TQMa7D/MBa7x using the on-board SPI attached NOR flash. arch/arm/boot/dts/nxp/imx/imx7s.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)