| Message ID | 20231124092121.16866-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | dt-bindings: correct white-spaces in examples | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
On Fri, Nov 24, 2023 at 10:21:21AM +0100, Krzysztof Kozlowski wrote: > Use only one and exactly one space around '=' in DTS example. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Merging idea: Rob's DT. > Should apply cleanly on Rob's for-next. > --- > .../devicetree/bindings/auxdisplay/hit,hd44780.yaml | 2 +- > .../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +- > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++--- > .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +- > .../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml | 2 +- > .../interrupt-controller/st,stih407-irq-syscfg.yaml | 4 ++-- > Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 2 +- > Documentation/devicetree/bindings/net/sff,sfp.yaml | 2 +- > .../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 2 +- > .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++--- > .../devicetree/bindings/power/supply/richtek,rt9455.yaml | 8 ++++---- > .../devicetree/bindings/regulator/mps,mp5416.yaml | 4 ++-- > .../devicetree/bindings/regulator/mps,mpq7920.yaml | 4 ++-- > .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 8 ++++---- > 14 files changed, 27 insertions(+), 27 deletions(-) > [nip] > diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > index 624984d51c10..7f8d98226437 100644 > --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > @@ -125,7 +125,7 @@ examples: > clk25m: clock-oscillator-25m { > compatible = "fixed-clock"; > #clock-cells = <0>; > - clock-frequency = <25000000>; > + clock-frequency = <25000000>; > clock-output-names = "clk25m"; > }; > ... For Baikal-T1 CCU PLL DT-schema Acked-by: Serge Semin <fancer.lancer@gmail.com> -Serge(y)
On Fri, 24 Nov 2023 10:21:21 +0100 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > Use only one and exactly one space around '=' in DTS example. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio > --- > > Merging idea: Rob's DT. > Should apply cleanly on Rob's for-next. > --- > .../devicetree/bindings/auxdisplay/hit,hd44780.yaml | 2 +- > .../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +- > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++--- > .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +- > .../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml | 2 +- > .../interrupt-controller/st,stih407-irq-syscfg.yaml | 4 ++-- > Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 2 +- > Documentation/devicetree/bindings/net/sff,sfp.yaml | 2 +- > .../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 2 +- > .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++--- > .../devicetree/bindings/power/supply/richtek,rt9455.yaml | 8 ++++---- > .../devicetree/bindings/regulator/mps,mp5416.yaml | 4 ++-- > .../devicetree/bindings/regulator/mps,mpq7920.yaml | 4 ++-- > .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 8 ++++---- > 14 files changed, 27 insertions(+), 27 deletions(-) > > diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml > index fde07e4b119d..406a922a714e 100644 > --- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml > +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml > @@ -113,7 +113,7 @@ examples: > hd44780 { > compatible = "hit,hd44780"; > display-height-chars = <2>; > - display-width-chars = <16>; > + display-width-chars = <16>; > data-gpios = <&pcf8574 4 0>, > <&pcf8574 5 0>, > <&pcf8574 6 0>, > diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > index 624984d51c10..7f8d98226437 100644 > --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > @@ -125,7 +125,7 @@ examples: > clk25m: clock-oscillator-25m { > compatible = "fixed-clock"; > #clock-cells = <0>; > - clock-frequency = <25000000>; > + clock-frequency = <25000000>; > clock-output-names = "clk25m"; > }; > ... > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > index 5fcc8dd012f1..be2616ff9af6 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > @@ -80,9 +80,9 @@ examples: > compatible = "adi,ad7780"; > reg = <0>; > > - avdd-supply = <&vdd_supply>; > - powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > - adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > + avdd-supply = <&vdd_supply>; > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; > }; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml > index 73def67fbe01..b6a233cd5f6b 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml > @@ -58,7 +58,7 @@ examples: > reg = <0x3600>; > interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; > qcom,external-resistor-micro-ohms = <10000>; > - #io-channel-cells = <1>; > + #io-channel-cells = <1>; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml > index b3a626389870..64abe9a4cd9e 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml > @@ -46,6 +46,6 @@ examples: > pmic_rradc: adc@4500 { > compatible = "qcom,pmi8998-rradc"; > reg = <0x4500>; > - #io-channel-cells = <1>; > + #io-channel-cells = <1>; > }; > }; > diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml > index 2b153d7c5421..e44e4e5708a7 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml > @@ -55,8 +55,8 @@ examples: > - | > #include <dt-bindings/interrupt-controller/irq-st.h> > irq-syscfg { > - compatible = "st,stih407-irq-syscfg"; > - st,syscfg = <&syscfg_cpu>; > + compatible = "st,stih407-irq-syscfg"; > + st,syscfg = <&syscfg_cpu>; > st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, > <ST_IRQ_SYSCFG_PMU_1>; > st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, > diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > index 2459a55ed540..940b12688167 100644 > --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > @@ -203,7 +203,7 @@ examples: > bus-width = <4>; > cap-sd-highspeed; > cap-mmc-highspeed; > - cd-gpios = <&gpio2 31 0x4>; > + cd-gpios = <&gpio2 31 0x4>; > st,sig-dir-dat0; > st,sig-dir-dat2; > st,sig-dir-cmd; > diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml > index 973e478a399d..bf6cbc7c2ba3 100644 > --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml > +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml > @@ -120,7 +120,7 @@ examples: > pinctrl-names = "default"; > pinctrl-0 = <&cps_sfpp0_pins>; > tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>; > - tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; > + tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; > }; > > mdio { > diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > index 53da2edd7c9a..120e3bb1e545 100644 > --- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > @@ -83,7 +83,7 @@ examples: > <0x0 0x28050000 0x0 0x00010000>, > <0x0 0x24200000 0x0 0x00002000>, > <0x0 0x24162000 0x0 0x00001000>; > - reg-names = "dbi", "config", "ulreg", "smu", "mpu"; > + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; > device_type = "pci"; > bus-range = <0x00 0xff>; > num-lanes = <2>; > diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > index b5ca40d0e251..d476de82e5c3 100644 > --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > @@ -185,17 +185,17 @@ examples: > sd1_mux { > pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ > <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ > - power-source = <3300>; > + power-source = <3300>; > }; > > sd1_data { > pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; > - power-source = <3300>; > + power-source = <3300>; > }; > > sd1_ctrl { > pins = "SD1_CLK", "SD1_CMD"; > - power-source = <3300>; > + power-source = <3300>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > index 07e38be39f1b..89f9603499b4 100644 > --- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > @@ -79,10 +79,10 @@ examples: > interrupt-parent = <&gpio1>; > interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > > - richtek,output-charge-current = <500000>; > - richtek,end-of-charge-percentage = <10>; > - richtek,battery-regulation-voltage = <4200000>; > - richtek,boost-output-voltage = <5050000>; > + richtek,output-charge-current = <500000>; > + richtek,end-of-charge-percentage = <10>; > + richtek,battery-regulation-voltage = <4200000>; > + richtek,boost-output-voltage = <5050000>; > > richtek,min-input-voltage-regulation = <4500000>; > richtek,avg-input-current-regulation = <500000>; > diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml > index 0221397eb51e..f825ee9efd81 100644 > --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml > +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml > @@ -62,8 +62,8 @@ examples: > regulator-name = "buck1"; > regulator-min-microvolt = <600000>; > regulator-max-microvolt = <2187500>; > - regulator-min-microamp = <3800000>; > - regulator-max-microamp = <6800000>; > + regulator-min-microamp = <3800000>; > + regulator-max-microamp = <6800000>; > regulator-boot-on; > }; > > diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > index 6de5b027f990..0d34af98403f 100644 > --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > @@ -98,8 +98,8 @@ examples: > regulator-name = "buck1"; > regulator-min-microvolt = <400000>; > regulator-max-microvolt = <3587500>; > - regulator-min-microamp = <460000>; > - regulator-max-microamp = <7600000>; > + regulator-min-microamp = <460000>; > + regulator-max-microamp = <7600000>; > regulator-boot-on; > mps,buck-ovp-disable; > mps,buck-phase-delay = /bits/ 8 <2>; > diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml > index 30632efdad8b..df36e29d974c 100644 > --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml > @@ -113,10 +113,10 @@ examples: > }; > > imx7d-cm4 { > - compatible = "fsl,imx7d-cm4"; > - memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; > - syscon = <&src>; > - clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; > + compatible = "fsl,imx7d-cm4"; > + memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; > + syscon = <&src>; > + clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; > }; > > - |
On Fri, Nov 24, 2023 at 10:21 AM Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > Use only one and exactly one space around '=' in DTS example. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++--- Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert
Quoting Krzysztof Kozlowski (2023-11-24 01:21:21) > Use only one and exactly one space around '=' in DTS example. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- Acked-by: Stephen Boyd <sboyd@kernel.org>
On Fri, Nov 24, 2023 at 10:21:21AM +0100, Krzysztof Kozlowski wrote: > Use only one and exactly one space around '=' in DTS example. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Merging idea: Rob's DT. > Should apply cleanly on Rob's for-next. > --- > .../devicetree/bindings/auxdisplay/hit,hd44780.yaml | 2 +- > .../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +- > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++--- > .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +- > .../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml | 2 +- > .../interrupt-controller/st,stih407-irq-syscfg.yaml | 4 ++-- > Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 2 +- > Documentation/devicetree/bindings/net/sff,sfp.yaml | 2 +- > .../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 2 +- > .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++--- > .../devicetree/bindings/power/supply/richtek,rt9455.yaml | 8 ++++---- > .../devicetree/bindings/regulator/mps,mp5416.yaml | 4 ++-- > .../devicetree/bindings/regulator/mps,mpq7920.yaml | 4 ++-- > .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 8 ++++---- Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > 14 files changed, 27 insertions(+), 27 deletions(-) > > diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml > index fde07e4b119d..406a922a714e 100644 > --- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml > +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml > @@ -113,7 +113,7 @@ examples: > hd44780 { > compatible = "hit,hd44780"; > display-height-chars = <2>; > - display-width-chars = <16>; > + display-width-chars = <16>; > data-gpios = <&pcf8574 4 0>, > <&pcf8574 5 0>, > <&pcf8574 6 0>, > diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > index 624984d51c10..7f8d98226437 100644 > --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > @@ -125,7 +125,7 @@ examples: > clk25m: clock-oscillator-25m { > compatible = "fixed-clock"; > #clock-cells = <0>; > - clock-frequency = <25000000>; > + clock-frequency = <25000000>; > clock-output-names = "clk25m"; > }; > ... > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > index 5fcc8dd012f1..be2616ff9af6 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > @@ -80,9 +80,9 @@ examples: > compatible = "adi,ad7780"; > reg = <0>; > > - avdd-supply = <&vdd_supply>; > - powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > - adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > + avdd-supply = <&vdd_supply>; > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; > }; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml > index 73def67fbe01..b6a233cd5f6b 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml > @@ -58,7 +58,7 @@ examples: > reg = <0x3600>; > interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; > qcom,external-resistor-micro-ohms = <10000>; > - #io-channel-cells = <1>; > + #io-channel-cells = <1>; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml > index b3a626389870..64abe9a4cd9e 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml > @@ -46,6 +46,6 @@ examples: > pmic_rradc: adc@4500 { > compatible = "qcom,pmi8998-rradc"; > reg = <0x4500>; > - #io-channel-cells = <1>; > + #io-channel-cells = <1>; > }; > }; > diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml > index 2b153d7c5421..e44e4e5708a7 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml > @@ -55,8 +55,8 @@ examples: > - | > #include <dt-bindings/interrupt-controller/irq-st.h> > irq-syscfg { > - compatible = "st,stih407-irq-syscfg"; > - st,syscfg = <&syscfg_cpu>; > + compatible = "st,stih407-irq-syscfg"; > + st,syscfg = <&syscfg_cpu>; > st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, > <ST_IRQ_SYSCFG_PMU_1>; > st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, > diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > index 2459a55ed540..940b12688167 100644 > --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > @@ -203,7 +203,7 @@ examples: > bus-width = <4>; > cap-sd-highspeed; > cap-mmc-highspeed; > - cd-gpios = <&gpio2 31 0x4>; > + cd-gpios = <&gpio2 31 0x4>; > st,sig-dir-dat0; > st,sig-dir-dat2; > st,sig-dir-cmd; > diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml > index 973e478a399d..bf6cbc7c2ba3 100644 > --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml > +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml > @@ -120,7 +120,7 @@ examples: > pinctrl-names = "default"; > pinctrl-0 = <&cps_sfpp0_pins>; > tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>; > - tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; > + tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; > }; > > mdio { > diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > index 53da2edd7c9a..120e3bb1e545 100644 > --- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > @@ -83,7 +83,7 @@ examples: > <0x0 0x28050000 0x0 0x00010000>, > <0x0 0x24200000 0x0 0x00002000>, > <0x0 0x24162000 0x0 0x00001000>; > - reg-names = "dbi", "config", "ulreg", "smu", "mpu"; > + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; > device_type = "pci"; > bus-range = <0x00 0xff>; > num-lanes = <2>; > diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > index b5ca40d0e251..d476de82e5c3 100644 > --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > @@ -185,17 +185,17 @@ examples: > sd1_mux { > pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ > <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ > - power-source = <3300>; > + power-source = <3300>; > }; > > sd1_data { > pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; > - power-source = <3300>; > + power-source = <3300>; > }; > > sd1_ctrl { > pins = "SD1_CLK", "SD1_CMD"; > - power-source = <3300>; > + power-source = <3300>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > index 07e38be39f1b..89f9603499b4 100644 > --- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > @@ -79,10 +79,10 @@ examples: > interrupt-parent = <&gpio1>; > interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > > - richtek,output-charge-current = <500000>; > - richtek,end-of-charge-percentage = <10>; > - richtek,battery-regulation-voltage = <4200000>; > - richtek,boost-output-voltage = <5050000>; > + richtek,output-charge-current = <500000>; > + richtek,end-of-charge-percentage = <10>; > + richtek,battery-regulation-voltage = <4200000>; > + richtek,boost-output-voltage = <5050000>; > > richtek,min-input-voltage-regulation = <4500000>; > richtek,avg-input-current-regulation = <500000>; > diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml > index 0221397eb51e..f825ee9efd81 100644 > --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml > +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml > @@ -62,8 +62,8 @@ examples: > regulator-name = "buck1"; > regulator-min-microvolt = <600000>; > regulator-max-microvolt = <2187500>; > - regulator-min-microamp = <3800000>; > - regulator-max-microamp = <6800000>; > + regulator-min-microamp = <3800000>; > + regulator-max-microamp = <6800000>; > regulator-boot-on; > }; > > diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > index 6de5b027f990..0d34af98403f 100644 > --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > @@ -98,8 +98,8 @@ examples: > regulator-name = "buck1"; > regulator-min-microvolt = <400000>; > regulator-max-microvolt = <3587500>; > - regulator-min-microamp = <460000>; > - regulator-max-microamp = <7600000>; > + regulator-min-microamp = <460000>; > + regulator-max-microamp = <7600000>; > regulator-boot-on; > mps,buck-ovp-disable; > mps,buck-phase-delay = /bits/ 8 <2>; > diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml > index 30632efdad8b..df36e29d974c 100644 > --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml > @@ -113,10 +113,10 @@ examples: > }; > > imx7d-cm4 { > - compatible = "fsl,imx7d-cm4"; > - memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; > - syscon = <&src>; > - clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; > + compatible = "fsl,imx7d-cm4"; > + memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; > + syscon = <&src>; > + clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; > }; > > - | > -- > 2.34.1 > >
On Fri, 24 Nov 2023 at 10:21, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > Use only one and exactly one space around '=' in DTS example. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Kind regards Uffe > > --- > > Merging idea: Rob's DT. > Should apply cleanly on Rob's for-next. > --- > .../devicetree/bindings/auxdisplay/hit,hd44780.yaml | 2 +- > .../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +- > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++--- > .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +- > .../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml | 2 +- > .../interrupt-controller/st,stih407-irq-syscfg.yaml | 4 ++-- > Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 2 +- > Documentation/devicetree/bindings/net/sff,sfp.yaml | 2 +- > .../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 2 +- > .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++--- > .../devicetree/bindings/power/supply/richtek,rt9455.yaml | 8 ++++---- > .../devicetree/bindings/regulator/mps,mp5416.yaml | 4 ++-- > .../devicetree/bindings/regulator/mps,mpq7920.yaml | 4 ++-- > .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 8 ++++---- > 14 files changed, 27 insertions(+), 27 deletions(-) > > diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml > index fde07e4b119d..406a922a714e 100644 > --- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml > +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml > @@ -113,7 +113,7 @@ examples: > hd44780 { > compatible = "hit,hd44780"; > display-height-chars = <2>; > - display-width-chars = <16>; > + display-width-chars = <16>; > data-gpios = <&pcf8574 4 0>, > <&pcf8574 5 0>, > <&pcf8574 6 0>, > diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > index 624984d51c10..7f8d98226437 100644 > --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml > @@ -125,7 +125,7 @@ examples: > clk25m: clock-oscillator-25m { > compatible = "fixed-clock"; > #clock-cells = <0>; > - clock-frequency = <25000000>; > + clock-frequency = <25000000>; > clock-output-names = "clk25m"; > }; > ... > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > index 5fcc8dd012f1..be2616ff9af6 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > @@ -80,9 +80,9 @@ examples: > compatible = "adi,ad7780"; > reg = <0>; > > - avdd-supply = <&vdd_supply>; > - powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > - adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > + avdd-supply = <&vdd_supply>; > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; > }; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml > index 73def67fbe01..b6a233cd5f6b 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml > @@ -58,7 +58,7 @@ examples: > reg = <0x3600>; > interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; > qcom,external-resistor-micro-ohms = <10000>; > - #io-channel-cells = <1>; > + #io-channel-cells = <1>; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml > index b3a626389870..64abe9a4cd9e 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml > @@ -46,6 +46,6 @@ examples: > pmic_rradc: adc@4500 { > compatible = "qcom,pmi8998-rradc"; > reg = <0x4500>; > - #io-channel-cells = <1>; > + #io-channel-cells = <1>; > }; > }; > diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml > index 2b153d7c5421..e44e4e5708a7 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml > @@ -55,8 +55,8 @@ examples: > - | > #include <dt-bindings/interrupt-controller/irq-st.h> > irq-syscfg { > - compatible = "st,stih407-irq-syscfg"; > - st,syscfg = <&syscfg_cpu>; > + compatible = "st,stih407-irq-syscfg"; > + st,syscfg = <&syscfg_cpu>; > st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, > <ST_IRQ_SYSCFG_PMU_1>; > st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, > diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > index 2459a55ed540..940b12688167 100644 > --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > @@ -203,7 +203,7 @@ examples: > bus-width = <4>; > cap-sd-highspeed; > cap-mmc-highspeed; > - cd-gpios = <&gpio2 31 0x4>; > + cd-gpios = <&gpio2 31 0x4>; > st,sig-dir-dat0; > st,sig-dir-dat2; > st,sig-dir-cmd; > diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml > index 973e478a399d..bf6cbc7c2ba3 100644 > --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml > +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml > @@ -120,7 +120,7 @@ examples: > pinctrl-names = "default"; > pinctrl-0 = <&cps_sfpp0_pins>; > tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>; > - tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; > + tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; > }; > > mdio { > diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > index 53da2edd7c9a..120e3bb1e545 100644 > --- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > @@ -83,7 +83,7 @@ examples: > <0x0 0x28050000 0x0 0x00010000>, > <0x0 0x24200000 0x0 0x00002000>, > <0x0 0x24162000 0x0 0x00001000>; > - reg-names = "dbi", "config", "ulreg", "smu", "mpu"; > + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; > device_type = "pci"; > bus-range = <0x00 0xff>; > num-lanes = <2>; > diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > index b5ca40d0e251..d476de82e5c3 100644 > --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml > @@ -185,17 +185,17 @@ examples: > sd1_mux { > pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ > <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ > - power-source = <3300>; > + power-source = <3300>; > }; > > sd1_data { > pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; > - power-source = <3300>; > + power-source = <3300>; > }; > > sd1_ctrl { > pins = "SD1_CLK", "SD1_CMD"; > - power-source = <3300>; > + power-source = <3300>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > index 07e38be39f1b..89f9603499b4 100644 > --- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > @@ -79,10 +79,10 @@ examples: > interrupt-parent = <&gpio1>; > interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > > - richtek,output-charge-current = <500000>; > - richtek,end-of-charge-percentage = <10>; > - richtek,battery-regulation-voltage = <4200000>; > - richtek,boost-output-voltage = <5050000>; > + richtek,output-charge-current = <500000>; > + richtek,end-of-charge-percentage = <10>; > + richtek,battery-regulation-voltage = <4200000>; > + richtek,boost-output-voltage = <5050000>; > > richtek,min-input-voltage-regulation = <4500000>; > richtek,avg-input-current-regulation = <500000>; > diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml > index 0221397eb51e..f825ee9efd81 100644 > --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml > +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml > @@ -62,8 +62,8 @@ examples: > regulator-name = "buck1"; > regulator-min-microvolt = <600000>; > regulator-max-microvolt = <2187500>; > - regulator-min-microamp = <3800000>; > - regulator-max-microamp = <6800000>; > + regulator-min-microamp = <3800000>; > + regulator-max-microamp = <6800000>; > regulator-boot-on; > }; > > diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > index 6de5b027f990..0d34af98403f 100644 > --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > @@ -98,8 +98,8 @@ examples: > regulator-name = "buck1"; > regulator-min-microvolt = <400000>; > regulator-max-microvolt = <3587500>; > - regulator-min-microamp = <460000>; > - regulator-max-microamp = <7600000>; > + regulator-min-microamp = <460000>; > + regulator-max-microamp = <7600000>; > regulator-boot-on; > mps,buck-ovp-disable; > mps,buck-phase-delay = /bits/ 8 <2>; > diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml > index 30632efdad8b..df36e29d974c 100644 > --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml > @@ -113,10 +113,10 @@ examples: > }; > > imx7d-cm4 { > - compatible = "fsl,imx7d-cm4"; > - memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; > - syscon = <&src>; > - clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; > + compatible = "fsl,imx7d-cm4"; > + memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; > + syscon = <&src>; > + clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; > }; > > - | > -- > 2.34.1 > >
On Fri, 24 Nov 2023 10:21:21 +0100, Krzysztof Kozlowski wrote: > Use only one and exactly one space around '=' in DTS example. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Merging idea: Rob's DT. > Should apply cleanly on Rob's for-next. > --- > .../devicetree/bindings/auxdisplay/hit,hd44780.yaml | 2 +- > .../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +- > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++--- > .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +- > .../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml | 2 +- > .../interrupt-controller/st,stih407-irq-syscfg.yaml | 4 ++-- > Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 2 +- > Documentation/devicetree/bindings/net/sff,sfp.yaml | 2 +- > .../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 2 +- > .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++--- > .../devicetree/bindings/power/supply/richtek,rt9455.yaml | 8 ++++---- > .../devicetree/bindings/regulator/mps,mp5416.yaml | 4 ++-- > .../devicetree/bindings/regulator/mps,mpq7920.yaml | 4 ++-- > .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 8 ++++---- > 14 files changed, 27 insertions(+), 27 deletions(-) > Applied, thanks!
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml index fde07e4b119d..406a922a714e 100644 --- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml @@ -113,7 +113,7 @@ examples: hd44780 { compatible = "hit,hd44780"; display-height-chars = <2>; - display-width-chars = <16>; + display-width-chars = <16>; data-gpios = <&pcf8574 4 0>, <&pcf8574 5 0>, <&pcf8574 6 0>, diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml index 624984d51c10..7f8d98226437 100644 --- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml @@ -125,7 +125,7 @@ examples: clk25m: clock-oscillator-25m { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <25000000>; + clock-frequency = <25000000>; clock-output-names = "clk25m"; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml index 5fcc8dd012f1..be2616ff9af6 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -80,9 +80,9 @@ examples: compatible = "adi,ad7780"; reg = <0>; - avdd-supply = <&vdd_supply>; - powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + avdd-supply = <&vdd_supply>; + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml index 73def67fbe01..b6a233cd5f6b 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml @@ -58,7 +58,7 @@ examples: reg = <0x3600>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; - #io-channel-cells = <1>; + #io-channel-cells = <1>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml index b3a626389870..64abe9a4cd9e 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml @@ -46,6 +46,6 @@ examples: pmic_rradc: adc@4500 { compatible = "qcom,pmi8998-rradc"; reg = <0x4500>; - #io-channel-cells = <1>; + #io-channel-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml index 2b153d7c5421..e44e4e5708a7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml @@ -55,8 +55,8 @@ examples: - | #include <dt-bindings/interrupt-controller/irq-st.h> irq-syscfg { - compatible = "st,stih407-irq-syscfg"; - st,syscfg = <&syscfg_cpu>; + compatible = "st,stih407-irq-syscfg"; + st,syscfg = <&syscfg_cpu>; st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, <ST_IRQ_SYSCFG_PMU_1>; st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 2459a55ed540..940b12688167 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -203,7 +203,7 @@ examples: bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - cd-gpios = <&gpio2 31 0x4>; + cd-gpios = <&gpio2 31 0x4>; st,sig-dir-dat0; st,sig-dir-dat2; st,sig-dir-cmd; diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml index 973e478a399d..bf6cbc7c2ba3 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml @@ -120,7 +120,7 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&cps_sfpp0_pins>; tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>; }; mdio { diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml index 53da2edd7c9a..120e3bb1e545 100644 --- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml @@ -83,7 +83,7 @@ examples: <0x0 0x28050000 0x0 0x00010000>, <0x0 0x24200000 0x0 0x00002000>, <0x0 0x24162000 0x0 0x00001000>; - reg-names = "dbi", "config", "ulreg", "smu", "mpu"; + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; device_type = "pci"; bus-range = <0x00 0xff>; num-lanes = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index b5ca40d0e251..d476de82e5c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -185,17 +185,17 @@ examples: sd1_mux { pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ - power-source = <3300>; + power-source = <3300>; }; sd1_data { pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; + power-source = <3300>; }; sd1_ctrl { pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; + power-source = <3300>; }; }; }; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml index 07e38be39f1b..89f9603499b4 100644 --- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml @@ -79,10 +79,10 @@ examples: interrupt-parent = <&gpio1>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - richtek,output-charge-current = <500000>; - richtek,end-of-charge-percentage = <10>; - richtek,battery-regulation-voltage = <4200000>; - richtek,boost-output-voltage = <5050000>; + richtek,output-charge-current = <500000>; + richtek,end-of-charge-percentage = <10>; + richtek,battery-regulation-voltage = <4200000>; + richtek,boost-output-voltage = <5050000>; richtek,min-input-voltage-regulation = <4500000>; richtek,avg-input-current-regulation = <500000>; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index 0221397eb51e..f825ee9efd81 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -62,8 +62,8 @@ examples: regulator-name = "buck1"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <2187500>; - regulator-min-microamp = <3800000>; - regulator-max-microamp = <6800000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-boot-on; }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index 6de5b027f990..0d34af98403f 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -98,8 +98,8 @@ examples: regulator-name = "buck1"; regulator-min-microvolt = <400000>; regulator-max-microvolt = <3587500>; - regulator-min-microamp = <460000>; - regulator-max-microamp = <7600000>; + regulator-min-microamp = <460000>; + regulator-max-microamp = <7600000>; regulator-boot-on; mps,buck-ovp-disable; mps,buck-phase-delay = /bits/ 8 <2>; diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml index 30632efdad8b..df36e29d974c 100644 --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml @@ -113,10 +113,10 @@ examples: }; imx7d-cm4 { - compatible = "fsl,imx7d-cm4"; - memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; - syscon = <&src>; - clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; + compatible = "fsl,imx7d-cm4"; + memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; + syscon = <&src>; + clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; }; - |
Use only one and exactly one space around '=' in DTS example. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Merging idea: Rob's DT. Should apply cleanly on Rob's for-next. --- .../devicetree/bindings/auxdisplay/hit,hd44780.yaml | 2 +- .../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +- Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++--- .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +- .../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml | 2 +- .../interrupt-controller/st,stih407-irq-syscfg.yaml | 4 ++-- Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 2 +- Documentation/devicetree/bindings/net/sff,sfp.yaml | 2 +- .../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 2 +- .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++--- .../devicetree/bindings/power/supply/richtek,rt9455.yaml | 8 ++++---- .../devicetree/bindings/regulator/mps,mp5416.yaml | 4 ++-- .../devicetree/bindings/regulator/mps,mpq7920.yaml | 4 ++-- .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 8 ++++---- 14 files changed, 27 insertions(+), 27 deletions(-)