| Message ID | 20231129092949.2103338-1-xianwei.zhao@amlogic.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: amlogic: s4: add some device nodes | expand |
Hi, On 29/11/2023 10:29, Xianwei Zhao wrote: > Add some device nodes for board AQ222, > including clock,I2C,SPICC,nand and ethernet. Could you reformat a little bit the commit message, it's a little bit scarce and the style is weird. > > Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> > --- > .../dts/amlogic/meson-s4-s805x2-aq222.dts | 55 +++ > arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 350 +++++++++++++++++- > 2 files changed, 404 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts > index c1f322c73982..fd349c49ebf5 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts Please move the meson-s4-s805x2-aq222.dts changes in a separate commit > @@ -23,6 +23,16 @@ memory@0 { > reg = <0x0 0x0 0x0 0x40000000>; > }; > > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + secmon_reserved: secmon@5000000 { > + reg = <0x0 0x05000000 0x0 0x4000000>; > + no-map; > + }; Please add a comment before the node explaining what needs this memory > + }; > }; > > &uart_B { > @@ -34,3 +44,48 @@ &ir { > pinctrl-0 = <&remote_pins>; > pinctrl-names = "default"; > }; > + > +&nand { > + status = "okay"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pinctrl-0 = <&nand_pins>; > + pinctrl-names = "default"; > + > + nand@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + nand-on-flash-bbt; > + > + partition@0 { > + label = "boot"; > + reg = <0x0 0x00200000>; > + }; > + partition@200000 { > + label = "env"; > + reg = <0x00200000 0x00400000>; > + }; > + partition@600000 { > + label = "system"; > + reg = <0x00600000 0x00a00000>; > + }; > + partition@1000000 { > + label = "rootfs"; > + reg = <0x01000000 0x03000000>; > + }; > + partition@4000000 { > + label = "media"; > + reg = <0x04000000 0x8000000>; > + }; > + }; > +}; > + > +&spicc0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&spicc0_pins_x>; > + cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > index 2344b2d741c3..022aba0f9ef7 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > @@ -6,6 +6,10 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/gpio/meson-s4-gpio.h> > +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> > +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> > +#include <dt-bindings/power/meson-s4-power.h> > > / { > cpus { > @@ -92,6 +96,38 @@ apb4: bus@fe000000 { > #size-cells = <2>; > ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; > > + clkc_periphs: clock-controller@0 { > + compatible = "amlogic,s4-peripherals-clkc"; > + reg = <0x0 0x0 0x0 0x49c>; > + clocks = <&clkc_pll CLKID_FCLK_DIV2>, > + <&clkc_pll CLKID_FCLK_DIV2P5>, > + <&clkc_pll CLKID_FCLK_DIV3>, > + <&clkc_pll CLKID_FCLK_DIV4>, > + <&clkc_pll CLKID_FCLK_DIV5>, > + <&clkc_pll CLKID_FCLK_DIV7>, > + <&clkc_pll CLKID_HIFI_PLL>, > + <&clkc_pll CLKID_GP0_PLL>, > + <&clkc_pll CLKID_MPLL0>, > + <&clkc_pll CLKID_MPLL1>, > + <&clkc_pll CLKID_MPLL2>, > + <&clkc_pll CLKID_MPLL3>, > + <&clkc_pll CLKID_HDMI_PLL>, > + <&xtal>; > + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", > + "fclk_div4", "fclk_div5", "fclk_div7", > + "hifi_pll", "gp0_pll", "mpll0", "mpll1", > + "mpll2", "mpll3", "hdmi_pll", "xtal"; > + #clock-cells = <1>; > + }; > + > + clkc_pll: clock-controller@8000 { > + compatible = "amlogic,s4-pll-clkc"; > + reg = <0x0 0x8000 0x0 0x1e8>; > + clocks = <&xtal>; > + clock-names = "xtal"; > + #clock-cells = <1>; > + }; > + > watchdog@2100 { > compatible = "amlogic,s4-wdt", "amlogic,t7-wdt"; > reg = <0x0 0x2100 0x0 0x10>; > @@ -120,6 +156,187 @@ mux { > bias-disable; > }; > }; > + > + i2c0_pins1:i2c0-pins1 { Please add a space after ":" > + mux { > + groups = "i2c0_sda", > + "i2c0_scl"; > + function = "i2c0"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c1_pins1:i2c1-pins1 { Ditto > + mux { > + groups = "i2c1_sda_c", > + "i2c1_scl_c"; > + function = "i2c1"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c1_pins2:i2c1-pins2 { Ditto > + mux { > + groups = "i2c1_sda_d", > + "i2c1_scl_d"; > + function = "i2c1"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c1_pins3:i2c1-pins3 { Ditto > + mux { > + groups = "i2c1_sda_h", > + "i2c1_scl_h"; > + function = "i2c1"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c1_pins4:i2c1-pins4 { Ditto > + mux { > + groups = "i2c1_sda_x", > + "i2c1_scl_x"; > + function = "i2c1"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c2_pins1:i2c2-pins1 { > + mux { > + groups = "i2c2_sda_d", > + "i2c2_scl_d"; > + function = "i2c2"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c2_pins2:i2c2-pins2 { > + mux { > + groups = "i2c2_sda_h8", > + "i2c2_scl_h9"; > + function = "i2c2"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c2_pins3:i2c2-pins3 { Ditto > + mux { > + groups = "i2c2_sda_h0", > + "i2c2_scl_h1"; > + function = "i2c2"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c3_pins1:i2c3-pins1 { Ditto > + mux { > + groups = "i2c3_sda_x", > + "i2c3_scl_x"; > + function = "i2c3"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c3_pins2:i2c3-pins2 { Ditto > + mux { > + groups = "i2c3_sda_z", > + "i2c3_scl_z"; > + function = "i2c3"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c4_pins1:i2c4-pins1 { Ditto > + mux { > + groups = "i2c4_sda_c", > + "i2c4_scl_c"; > + function = "i2c4"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c4_pins2:i2c4-pins2 { Ditto > + mux { > + groups = "i2c4_sda_d", > + "i2c4_scl_d"; > + function = "i2c4"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + i2c4_pins3:i2c4-pins3 { Ditto > + mux { > + groups = "i2c4_sda_z", > + "i2c4_scl_z"; > + function = "i2c4"; > + drive-strength-microamp = <3000>; > + bias-disable; > + }; > + }; > + > + nand_pins: nand-pins { > + mux { > + groups = "emmc_nand_d0", > + "emmc_nand_d1", > + "emmc_nand_d2", > + "emmc_nand_d3", > + "emmc_nand_d4", > + "emmc_nand_d5", > + "emmc_nand_d6", > + "emmc_nand_d7", > + "nand_ce0", > + "nand_ale", > + "nand_cle", > + "nand_wen_clk", > + "nand_ren_wr"; > + function = "nand"; > + input-enable; > + }; > + }; > + > + spicc0_pins_x: spicc0-pins_x { > + mux { > + groups = "spi_a_mosi_x", > + "spi_a_miso_x", > + "spi_a_clk_x"; > + function = "spi_a"; > + drive-strength-microamp = <3000>; > + }; > + }; > + > + spicc0_pins_h: spicc0-pins-h { > + mux { > + groups = "spi_a_mosi_h", > + "spi_a_miso_h", > + "spi_a_clk_h"; > + function = "spi_a"; > + drive-strength-microamp = <3000>; > + }; > + }; > + > + spicc0_pins_z: spicc0-pins-z { > + mux { > + groups = "spi_a_mosi_z", > + "spi_a_miso_z", > + "spi_a_clk_z"; > + function = "spi_a"; > + drive-strength-microamp = <3000>; > + }; > + }; > + > }; > > gpio_intc: interrupt-controller@4080 { > @@ -132,13 +349,119 @@ gpio_intc: interrupt-controller@4080 { > <10 11 12 13 14 15 16 17 18 19 20 21>; > }; > > + eth_phy: mdio-multiplexer@28000 { > + compatible = "amlogic,g12a-mdio-mux"; > + reg = <0x0 0x28000 0x0 0xa4>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&clkc_periphs CLKID_ETHPHY>, > + <&xtal>, > + <&clkc_pll CLKID_MPLL_50M>; > + clock-names = "pclk", "clkin0", "clkin1"; > + mdio-parent-bus = <&mdio0>; > + > + ext_mdio: mdio@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + int_mdio: mdio@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + internal_ephy: ethernet-phy@8 { > + compatible = "ethernet-phy-id0180.3301", > + "ethernet-phy-ieee802.3-c22"; > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > + reg = <8>; > + max-speed = <100>; > + }; > + }; > + }; > + > + spicc0: spi@50000 { > + compatible = "amlogic,meson-g12a-spicc"; > + reg = <0x0 0x50000 0x0 0x44>; > + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clkc_periphs CLKID_SPICC0>, > + <&clkc_periphs CLKID_SPICC0_EN>; > + clock-names = "core", "pclk"; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c0: i2c@66000 { > + compatible = "amlogic,meson-axg-i2c"; > + reg = <0x0 0x66000 0x0 0x20>; > + interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc_periphs CLKID_I2C_M_A>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@68000 { > + compatible = "amlogic,meson-axg-i2c"; > + reg = <0x0 0x68000 0x0 0x20>; > + interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc_periphs CLKID_I2C_M_B>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c2: i2c@6a000 { > + compatible = "amlogic,meson-axg-i2c"; > + reg = <0x0 0x6a000 0x0 0x20>; > + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc_periphs CLKID_I2C_M_C>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c3: i2c@6c000 { > + compatible = "amlogic,meson-axg-i2c"; > + reg = <0x0 0x6c000 0x0 0x20>; > + interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc_periphs CLKID_I2C_M_D>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c4: i2c@6e000 { > + compatible = "amlogic,meson-axg-i2c"; > + reg = <0x0 0x6e000 0x0 0x20>; > + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc_periphs CLKID_I2C_M_E>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + nand: nand-controller@8c800 { > + compatible = "amlogic,meson-axg-nfc"; > + reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>; > + reg-names = "nfc", "emmc"; > + interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc_periphs CLKID_SD_EMMC_C>, > + <&clkc_pll CLKID_FCLK_DIV2>; > + clock-names = "core", "device"; > + status = "disabled"; > + }; > + > uart_B: serial@7a000 { > compatible = "amlogic,meson-s4-uart", > "amlogic,meson-ao-uart"; > reg = <0x0 0x7a000 0x0 0x18>; > interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; > status = "disabled"; > - clocks = <&xtal>, <&xtal>, <&xtal>; > + clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>; > clock-names = "xtal", "pclk", "baud"; > }; > > @@ -160,5 +483,30 @@ hwrng: rng@440788 { > reg = <0x0 0x440788 0x0 0x0c>; > }; > }; > + > + ethmac: ethernet@fdc00000 { > + compatible = "amlogic,meson-axg-dwmac", > + "snps,dwmac-3.70a", > + "snps,dwmac"; > + reg = <0x0 0xfdc00000 0x0 0x10000>, > + <0x0 0xfe024000 0x0 0x8>; > + > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "macirq"; > + power-domains = <&pwrc PWRC_S4_ETH_ID>; > + clocks = <&clkc_periphs CLKID_ETH>, > + <&clkc_pll CLKID_FCLK_DIV2>, > + <&clkc_pll CLKID_MPLL2>; > + clock-names = "stmmaceth", "clkin0", "clkin1"; > + rx-fifo-depth = <4096>; > + tx-fifo-depth = <2048>; > + status = "disabled"; > + > + mdio0: mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dwmac-mdio"; > + }; > + }; > }; > }; > > base-commit: 3a5038e9c0556e51db96c2f7149d853efb886c95 Thanks, Neil
Hi Neil,
Thanks for your review.
On 2023/11/29 18:42, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
>
> Hi,
>
> On 29/11/2023 10:29, Xianwei Zhao wrote:
>> Add some device nodes for board AQ222,
>> including clock,I2C,SPICC,nand and ethernet.
>
> Could you reformat a little bit the commit message, it's a little bit
> scarce
> and the style is weird.
>
Will do.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>> .../dts/amlogic/meson-s4-s805x2-aq222.dts | 55 +++
>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 350 +++++++++++++++++-
>> 2 files changed, 404 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>> b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>> index c1f322c73982..fd349c49ebf5 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>
> Please move the meson-s4-s805x2-aq222.dts changes in a separate commit
>
Will do.
>> @@ -23,6 +23,16 @@ memory@0 {
>> reg = <0x0 0x0 0x0 0x40000000>;
>> };
>>
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + secmon_reserved: secmon@5000000 {
>> + reg = <0x0 0x05000000 0x0 0x4000000>;
>> + no-map;
>> + };
>
> Please add a comment before the node explaining what needs this memory
>
Will add comment.
>> + };
>> };
>>
>> &uart_B {
>> @@ -34,3 +44,48 @@ &ir {
>> pinctrl-0 = <&remote_pins>;
>> pinctrl-names = "default";
>> };
>> +
>> +&nand {
>> + status = "okay";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + pinctrl-0 = <&nand_pins>;
>> + pinctrl-names = "default";
>> +
>> + nand@0 {
>> + reg = <0>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + nand-on-flash-bbt;
>> +
>> + partition@0 {
>> + label = "boot";
>> + reg = <0x0 0x00200000>;
>> + };
>> + partition@200000 {
>> + label = "env";
>> + reg = <0x00200000 0x00400000>;
>> + };
>> + partition@600000 {
>> + label = "system";
>> + reg = <0x00600000 0x00a00000>;
>> + };
>> + partition@1000000 {
>> + label = "rootfs";
>> + reg = <0x01000000 0x03000000>;
>> + };
>> + partition@4000000 {
>> + label = "media";
>> + reg = <0x04000000 0x8000000>;
>> + };
>> + };
>> +};
>> +
>> +&spicc0 {
>> + status = "okay";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&spicc0_pins_x>;
>> + cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> index 2344b2d741c3..022aba0f9ef7 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> @@ -6,6 +6,10 @@
>> #include <dt-bindings/interrupt-controller/irq.h>
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> #include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/gpio/meson-s4-gpio.h>
>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
>> +#include <dt-bindings/power/meson-s4-power.h>
>>
>> / {
>> cpus {
>> @@ -92,6 +96,38 @@ apb4: bus@fe000000 {
>> #size-cells = <2>;
>> ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>>
>> + clkc_periphs: clock-controller@0 {
>> + compatible = "amlogic,s4-peripherals-clkc";
>> + reg = <0x0 0x0 0x0 0x49c>;
>> + clocks = <&clkc_pll CLKID_FCLK_DIV2>,
>> + <&clkc_pll CLKID_FCLK_DIV2P5>,
>> + <&clkc_pll CLKID_FCLK_DIV3>,
>> + <&clkc_pll CLKID_FCLK_DIV4>,
>> + <&clkc_pll CLKID_FCLK_DIV5>,
>> + <&clkc_pll CLKID_FCLK_DIV7>,
>> + <&clkc_pll CLKID_HIFI_PLL>,
>> + <&clkc_pll CLKID_GP0_PLL>,
>> + <&clkc_pll CLKID_MPLL0>,
>> + <&clkc_pll CLKID_MPLL1>,
>> + <&clkc_pll CLKID_MPLL2>,
>> + <&clkc_pll CLKID_MPLL3>,
>> + <&clkc_pll CLKID_HDMI_PLL>,
>> + <&xtal>;
>> + clock-names = "fclk_div2",
>> "fclk_div2p5", "fclk_div3",
>> + "fclk_div4",
>> "fclk_div5", "fclk_div7",
>> + "hifi_pll", "gp0_pll",
>> "mpll0", "mpll1",
>> + "mpll2", "mpll3",
>> "hdmi_pll", "xtal";
>> + #clock-cells = <1>;
>> + };
>> +
>> + clkc_pll: clock-controller@8000 {
>> + compatible = "amlogic,s4-pll-clkc";
>> + reg = <0x0 0x8000 0x0 0x1e8>;
>> + clocks = <&xtal>;
>> + clock-names = "xtal";
>> + #clock-cells = <1>;
>> + };
>> +
>> watchdog@2100 {
>> compatible = "amlogic,s4-wdt",
>> "amlogic,t7-wdt";
>> reg = <0x0 0x2100 0x0 0x10>;
>> @@ -120,6 +156,187 @@ mux {
>> bias-disable;
>> };
>> };
>> +
>> + i2c0_pins1:i2c0-pins1 {
>
> Please add a space after ":"
>
Will do.
>> + mux {
>> + groups = "i2c0_sda",
>> + "i2c0_scl";
>> + function = "i2c0";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c1_pins1:i2c1-pins1 {
>
> Ditto
>
Will do.
>> + mux {
>> + groups = "i2c1_sda_c",
>> + "i2c1_scl_c";
>> + function = "i2c1";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c1_pins2:i2c1-pins2 {
> Ditto
>
Will do.
>> + mux {
>> + groups = "i2c1_sda_d",
>> + "i2c1_scl_d";
>> + function = "i2c1";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c1_pins3:i2c1-pins3 {
> Ditto
>
Will do.
>> + mux {
>> + groups = "i2c1_sda_h",
>> + "i2c1_scl_h";
>> + function = "i2c1";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c1_pins4:i2c1-pins4 {
> Ditto
>
>> + mux {
>> + groups = "i2c1_sda_x",
>> + "i2c1_scl_x";
>> + function = "i2c1";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c2_pins1:i2c2-pins1 {
>> + mux {
>> + groups = "i2c2_sda_d",
>> + "i2c2_scl_d";
>> + function = "i2c2";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c2_pins2:i2c2-pins2 {
>> + mux {
>> + groups = "i2c2_sda_h8",
>> + "i2c2_scl_h9";
>> + function = "i2c2";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c2_pins3:i2c2-pins3 {
> Ditto
>
Will do.
>> + mux {
>> + groups = "i2c2_sda_h0",
>> + "i2c2_scl_h1";
>> + function = "i2c2";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c3_pins1:i2c3-pins1 {
> Ditto
>
Will do.
>> + mux {
>> + groups = "i2c3_sda_x",
>> + "i2c3_scl_x";
>> + function = "i2c3";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c3_pins2:i2c3-pins2 {
> Ditto
>
Will do.
>> + mux {
>> + groups = "i2c3_sda_z",
>> + "i2c3_scl_z";
>> + function = "i2c3";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c4_pins1:i2c4-pins1 {
> Ditto
>
>> + mux {
>> + groups = "i2c4_sda_c",
>> + "i2c4_scl_c";
>> + function = "i2c4";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c4_pins2:i2c4-pins2 {
> Ditto
>
Will do.
>> + mux {
>> + groups = "i2c4_sda_d",
>> + "i2c4_scl_d";
>> + function = "i2c4";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + i2c4_pins3:i2c4-pins3 {
> Ditto
>
Will do.
>> + mux {
>> + groups = "i2c4_sda_z",
>> + "i2c4_scl_z";
>> + function = "i2c4";
>> + drive-strength-microamp
>> = <3000>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + nand_pins: nand-pins {
>> + mux {
>> + groups = "emmc_nand_d0",
>> + "emmc_nand_d1",
>> + "emmc_nand_d2",
>> + "emmc_nand_d3",
>> + "emmc_nand_d4",
>> + "emmc_nand_d5",
>> + "emmc_nand_d6",
>> + "emmc_nand_d7",
>> + "nand_ce0",
>> + "nand_ale",
>> + "nand_cle",
>> + "nand_wen_clk",
>> + "nand_ren_wr";
>> + function = "nand";
>> + input-enable;
>> + };
>> + };
>> +
>> + spicc0_pins_x: spicc0-pins_x {
>> + mux {
>> + groups = "spi_a_mosi_x",
>> + "spi_a_miso_x",
>> + "spi_a_clk_x";
>> + function = "spi_a";
>> + drive-strength-microamp
>> = <3000>;
>> + };
>> + };
>> +
>> + spicc0_pins_h: spicc0-pins-h {
>> + mux {
>> + groups = "spi_a_mosi_h",
>> + "spi_a_miso_h",
>> + "spi_a_clk_h";
>> + function = "spi_a";
>> + drive-strength-microamp
>> = <3000>;
>> + };
>> + };
>> +
>> + spicc0_pins_z: spicc0-pins-z {
>> + mux {
>> + groups = "spi_a_mosi_z",
>> + "spi_a_miso_z",
>> + "spi_a_clk_z";
>> + function = "spi_a";
>> + drive-strength-microamp
>> = <3000>;
>> + };
>> + };
>> +
>> };
>>
>> gpio_intc: interrupt-controller@4080 {
>> @@ -132,13 +349,119 @@ gpio_intc: interrupt-controller@4080 {
>> <10 11 12 13 14 15 16 17 18 19
>> 20 21>;
>> };
>>
>> + eth_phy: mdio-multiplexer@28000 {
>> + compatible = "amlogic,g12a-mdio-mux";
>> + reg = <0x0 0x28000 0x0 0xa4>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + clocks = <&clkc_periphs CLKID_ETHPHY>,
>> + <&xtal>,
>> + <&clkc_pll CLKID_MPLL_50M>;
>> + clock-names = "pclk", "clkin0", "clkin1";
>> + mdio-parent-bus = <&mdio0>;
>> +
>> + ext_mdio: mdio@0 {
>> + reg = <0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> +
>> + int_mdio: mdio@1 {
>> + reg = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + internal_ephy: ethernet-phy@8 {
>> + compatible =
>> "ethernet-phy-id0180.3301",
>> +
>> "ethernet-phy-ieee802.3-c22";
>> + interrupts = <GIC_SPI 75
>> IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <8>;
>> + max-speed = <100>;
>> + };
>> + };
>> + };
>> +
>> + spicc0: spi@50000 {
>> + compatible = "amlogic,meson-g12a-spicc";
>> + reg = <0x0 0x50000 0x0 0x44>;
>> + interrupts = <GIC_SPI 183
>> IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clkc_periphs CLKID_SPICC0>,
>> + <&clkc_periphs CLKID_SPICC0_EN>;
>> + clock-names = "core", "pclk";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c0: i2c@66000 {
>> + compatible = "amlogic,meson-axg-i2c";
>> + reg = <0x0 0x66000 0x0 0x20>;
>> + interrupts = <GIC_SPI 160
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&clkc_periphs CLKID_I2C_M_A>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@68000 {
>> + compatible = "amlogic,meson-axg-i2c";
>> + reg = <0x0 0x68000 0x0 0x20>;
>> + interrupts = <GIC_SPI 161
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&clkc_periphs CLKID_I2C_M_B>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@6a000 {
>> + compatible = "amlogic,meson-axg-i2c";
>> + reg = <0x0 0x6a000 0x0 0x20>;
>> + interrupts = <GIC_SPI 162
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&clkc_periphs CLKID_I2C_M_C>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c3: i2c@6c000 {
>> + compatible = "amlogic,meson-axg-i2c";
>> + reg = <0x0 0x6c000 0x0 0x20>;
>> + interrupts = <GIC_SPI 163
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&clkc_periphs CLKID_I2C_M_D>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c4: i2c@6e000 {
>> + compatible = "amlogic,meson-axg-i2c";
>> + reg = <0x0 0x6e000 0x0 0x20>;
>> + interrupts = <GIC_SPI 164
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&clkc_periphs CLKID_I2C_M_E>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + nand: nand-controller@8c800 {
>> + compatible = "amlogic,meson-axg-nfc";
>> + reg = <0x0 0x8c800 0x0 0x100>, <0x0
>> 0x8c000 0x0 0x4>;
>> + reg-names = "nfc", "emmc";
>> + interrupts = <GIC_SPI 175
>> IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&clkc_periphs CLKID_SD_EMMC_C>,
>> + <&clkc_pll CLKID_FCLK_DIV2>;
>> + clock-names = "core", "device";
>> + status = "disabled";
>> + };
>> +
>> uart_B: serial@7a000 {
>> compatible = "amlogic,meson-s4-uart",
>> "amlogic,meson-ao-uart";
>> reg = <0x0 0x7a000 0x0 0x18>;
>> interrupts = <GIC_SPI 169
>> IRQ_TYPE_EDGE_RISING>;
>> status = "disabled";
>> - clocks = <&xtal>, <&xtal>, <&xtal>;
>> + clocks = <&xtal>, <&clkc_periphs
>> CLKID_UART_B>, <&xtal>;
>> clock-names = "xtal", "pclk", "baud";
>> };
>>
>> @@ -160,5 +483,30 @@ hwrng: rng@440788 {
>> reg = <0x0 0x440788 0x0 0x0c>;
>> };
>> };
>> +
>> + ethmac: ethernet@fdc00000 {
>> + compatible = "amlogic,meson-axg-dwmac",
>> + "snps,dwmac-3.70a",
>> + "snps,dwmac";
>> + reg = <0x0 0xfdc00000 0x0 0x10000>,
>> + <0x0 0xfe024000 0x0 0x8>;
>> +
>> + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "macirq";
>> + power-domains = <&pwrc PWRC_S4_ETH_ID>;
>> + clocks = <&clkc_periphs CLKID_ETH>,
>> + <&clkc_pll CLKID_FCLK_DIV2>,
>> + <&clkc_pll CLKID_MPLL2>;
>> + clock-names = "stmmaceth", "clkin0", "clkin1";
>> + rx-fifo-depth = <4096>;
>> + tx-fifo-depth = <2048>;
>> + status = "disabled";
>> +
>> + mdio0: mdio {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "snps,dwmac-mdio";
>> + };
>> + };
>> };
>> };
>>
>> base-commit: 3a5038e9c0556e51db96c2f7149d853efb886c95
>
> Thanks,
> Neil
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts index c1f322c73982..fd349c49ebf5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts @@ -23,6 +23,16 @@ memory@0 { reg = <0x0 0x0 0x0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x4000000>; + no-map; + }; + }; }; &uart_B { @@ -34,3 +44,48 @@ &ir { pinctrl-0 = <&remote_pins>; pinctrl-names = "default"; }; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +&spicc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spicc0_pins_x>; + cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index 2344b2d741c3..022aba0f9ef7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -6,6 +6,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-s4-gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> +#include <dt-bindings/power/meson-s4-power.h> / { cpus { @@ -92,6 +96,38 @@ apb4: bus@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_periphs: clock-controller@0 { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_MPLL0>, + <&clkc_pll CLKID_MPLL1>, + <&clkc_pll CLKID_MPLL2>, + <&clkc_pll CLKID_MPLL3>, + <&clkc_pll CLKID_HDMI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", + "fclk_div4", "fclk_div5", "fclk_div7", + "hifi_pll", "gp0_pll", "mpll0", "mpll1", + "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; + + clkc_pll: clock-controller@8000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + watchdog@2100 { compatible = "amlogic,s4-wdt", "amlogic,t7-wdt"; reg = <0x0 0x2100 0x0 0x10>; @@ -120,6 +156,187 @@ mux { bias-disable; }; }; + + i2c0_pins1:i2c0-pins1 { + mux { + groups = "i2c0_sda", + "i2c0_scl"; + function = "i2c0"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins1:i2c1-pins1 { + mux { + groups = "i2c1_sda_c", + "i2c1_scl_c"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins2:i2c1-pins2 { + mux { + groups = "i2c1_sda_d", + "i2c1_scl_d"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins3:i2c1-pins3 { + mux { + groups = "i2c1_sda_h", + "i2c1_scl_h"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins4:i2c1-pins4 { + mux { + groups = "i2c1_sda_x", + "i2c1_scl_x"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins1:i2c2-pins1 { + mux { + groups = "i2c2_sda_d", + "i2c2_scl_d"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins2:i2c2-pins2 { + mux { + groups = "i2c2_sda_h8", + "i2c2_scl_h9"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins3:i2c2-pins3 { + mux { + groups = "i2c2_sda_h0", + "i2c2_scl_h1"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins1:i2c3-pins1 { + mux { + groups = "i2c3_sda_x", + "i2c3_scl_x"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins2:i2c3-pins2 { + mux { + groups = "i2c3_sda_z", + "i2c3_scl_z"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins1:i2c4-pins1 { + mux { + groups = "i2c4_sda_c", + "i2c4_scl_c"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins2:i2c4-pins2 { + mux { + groups = "i2c4_sda_d", + "i2c4_scl_d"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins3:i2c4-pins3 { + mux { + groups = "i2c4_sda_z", + "i2c4_scl_z"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + nand_pins: nand-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + }; + }; + + spicc0_pins_x: spicc0-pins_x { + mux { + groups = "spi_a_mosi_x", + "spi_a_miso_x", + "spi_a_clk_x"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_h: spicc0-pins-h { + mux { + groups = "spi_a_mosi_h", + "spi_a_miso_h", + "spi_a_clk_h"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_z: spicc0-pins-z { + mux { + groups = "spi_a_mosi_z", + "spi_a_miso_z", + "spi_a_clk_z"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + }; gpio_intc: interrupt-controller@4080 { @@ -132,13 +349,119 @@ gpio_intc: interrupt-controller@4080 { <10 11 12 13 14 15 16 17 18 19 20 21>; }; + eth_phy: mdio-multiplexer@28000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x28000 0x0 0xa4>; + + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_ETHPHY>, + <&xtal>, + <&clkc_pll CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet-phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + + spicc0: spi@50000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x50000 0x0 0x44>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SPICC0>, + <&clkc_periphs CLKID_SPICC0_EN>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@66000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x66000 0x0 0x20>; + interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@68000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x68000 0x0 0x20>; + interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@6a000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6a000 0x0 0x20>; + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@6c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6c000 0x0 0x20>; + interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@6e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6e000 0x0 0x20>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_E>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + nand: nand-controller@8c800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>; + reg-names = "nfc", "emmc"; + interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_SD_EMMC_C>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + status = "disabled"; + }; + uart_B: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x7a000 0x0 0x18>; interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; status = "disabled"; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; @@ -160,5 +483,30 @@ hwrng: rng@440788 { reg = <0x0 0x440788 0x0 0x0c>; }; }; + + ethmac: ethernet@fdc00000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xfdc00000 0x0 0x10000>, + <0x0 0xfe024000 0x0 0x8>; + + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + power-domains = <&pwrc PWRC_S4_ETH_ID>; + clocks = <&clkc_periphs CLKID_ETH>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; }; };
Add some device nodes for board AQ222, including clock,I2C,SPICC,nand and ethernet. Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> --- .../dts/amlogic/meson-s4-s805x2-aq222.dts | 55 +++ arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 350 +++++++++++++++++- 2 files changed, 404 insertions(+), 1 deletion(-) base-commit: 3a5038e9c0556e51db96c2f7149d853efb886c95